Skip to content

Lager i2c bus support

Ulrich Hecht linux-sh 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 9 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3ARM: shmobile: r8a7790: lager: i2c supportarch/arm/mach-shmobile/board-lager.c+60 -00 replies
2/3i2c: rcar: support R-Car H2 in i2c bus driverdrivers/i2c/busses/i2c-rcar.c+33 -20 replies
3/3ARM: shmobile: r8a7790: add the I2C bus clockarch/arm/mach-shmobile/clock-r8a7790.c+11 -03 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] Lager i2c bus support

This is the i2c part of the previously posted HDMI encoder RFC. The following suggestions have been applied:

- keep platform device out of SoC setup
- use device ID to trigger H2-specific behavior in i2c driver instead of platform data
- minor adjustments for style
- subjects cleared up

(The pinmux patch has been adopted by Laurent and thus omitted here.)

CU
Uli

Nguyen Viet Dung (2):
i2c: rcar: support R-Car H2 in i2c bus driver
ARM: shmobile: r8a7790: add the I2C bus clock

Ulrich Hecht (1):
ARM: shmobile: r8a7790: lager: i2c support

 arch/arm/mach-shmobile/board-lager.c   | 60 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-shmobile/clock-r8a7790.c | 11 +++++++
 drivers/i2c/busses/i2c-rcar.c          | 35 ++++++++++++++++++--
 3 files changed, 104 insertions(+), 2 deletions(-)
Signature · 1 line
1.8.1.4