Skip to contentSkip to conversation

keystone: Add pci feature to MACHINE Keystone

PATCH In review Sam Nelson 2 participants 2 messages Feb 1, 2014

lore
Share & tools
lore

Sam Nelson

author
#0 lore raw

PATCH v2 1/1 keystone: Add pci feature to MACHINE Keystone

- Device support pci interface

---
-PR incremented
---

---
 conf/machine/include/keystone.inc |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
conf/machine/include/keystone.inc +2 -2
index 72e71bf..b961ad3 100644
@@ -8,7 +8,7 @@ PREFERRED_PROVIDER_virtual/bootloader = "u-boot-keystone"
 PREFERRED_PROVIDER_u-boot = "u-boot-keystone"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r6"
+MACHINE_KERNEL_PR = "r7"
 
 KERNEL_IMAGETYPE = "uImage"
 
@@ -20,4 +20,4 @@ UBOOT_LOADADDRESS = "0x80008000"
 EXTRA_IMAGEDEPENDS += "u-boot"
 EXTRA_IMAGEDEPENDS += "boot-monitor"
 
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat"
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat pci"
Signature · 1 line
1.7.9.5
#1 lore raw

Ack.

Quoted 37 lines · Sam Nelson

- Device support pci interface

---
-PR incremented
---

---
 conf/machine/include/keystone.inc |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
conf/machine/include/keystone.inc +2 -2
index 72e71bf..b961ad3 100644
@@ -8,7 +8,7 @@ PREFERRED_PROVIDER_virtual/bootloader = "u-boot-keystone"
 PREFERRED_PROVIDER_u-boot = "u-boot-keystone"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r6"
+MACHINE_KERNEL_PR = "r7"
 
 KERNEL_IMAGETYPE = "uImage"
 
@@ -20,4 +20,4 @@ UBOOT_LOADADDRESS = "0x80008000"
 EXTRA_IMAGEDEPENDS += "u-boot"
 EXTRA_IMAGEDEPENDS += "boot-monitor"
 
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat"
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat pci"
Signature · 6 lines
1.7.9.5

_______________________________________________
meta-ti mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/meta-ti