hwmon: (lm63) Introduce 'dev' variable to point to client->dev
Guenter Roeck
maintainerPATCH v2 2/4 hwmon: (lm63) Introduce 'dev' variable to point to client->dev
client->dev is used multiple times in several functions. Introduce dev variable pointing to it to simplify the code.
Signed-off-by Guenter Roeck <[email protected]>
--- drivers/hwmon/lm63.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
drivers/hwmon/lm63.c +16 -16
@@ -1038,6 +1038,7 @@ static int lm63_detect(struct i2c_client *client,static void lm63_init_client (struct i2c_client *client) {struct lm63_data *data =i2c_get_clientdata (client); +struct device *dev = &client->dev;u8 convrate; data->config =i2c_smbus_read_byte_data (client,LM63_REG_CONFIG1 );
@@ -1046,7 +1047,7 @@ static void lm63_init_client(struct i2c_client *client)/* Start converting if needed */ if (data->config &0x40 ) {/* standby */ -dev_dbg (&client->dev,"Switching to operational mode\n" ); +dev_dbg (dev,"Switching to operational mode\n" ); data->config &=0xA7 ;i2c_smbus_write_byte_data (client,LM63_REG_CONFIG1 , data->config);
@@ -1099,13 +1100,13 @@ static void lm63_init_client(struct i2c_client *client)/* Show some debug info about the LM63 configuration */ if (data->kind = lm63) -dev_dbg (&client->dev,"Alert/tach pin configured for %s\n" , +dev_dbg (dev,"Alert/tach pin configured for %s\n" , (data->config &0x04 ) ?"tachometer input" :"alert output" ); -dev_dbg (&client->dev,"PWM clock %s kHz, output frequency %u Hz\n" , +dev_dbg (dev,"PWM clock %s kHz, output frequency %u Hz\n" , (data->config_fan &0x08 ) ?"1.4" :"360" , ((data->config_fan &0x08 ) ?700 :180000 ) / data->pwm1_freq); -dev_dbg (&client->dev,"PWM output active %s, %s mode\n" , +dev_dbg (dev,"PWM output active %s, %s mode\n" , (data->config_fan &0x10 ) ?"low" :"high" , (data->config_fan &0x20 ) ?"manual" :"auto" ); }
@@ -1113,10 +1114,11 @@ static void lm63_init_client(struct i2c_client *client)static int lm63_probe (struct i2c_client *client,const struct i2c_device_id *id) { +struct device *dev = &client->dev;struct lm63_data *data;int err; - data =devm_kzalloc (&client->dev,sizeof (struct lm63_data ),GFP_KERNEL ); + data =devm_kzalloc (dev,sizeof (struct lm63_data ),GFP_KERNEL );if (!data)return -ENOMEM ;
@@ -1133,27 +1135,25 @@ static int lm63_probe(struct i2c_client *client,lm63_init_client (client);/* Register sysfs hooks */ - err =sysfs_create_group (&client->dev.kobj, &lm63_group); + err =sysfs_create_group (&dev->kobj, &lm63_group);if (err)return err;if (data->config &0x04 ) {/* tachometer enabled */ - err =sysfs_create_group (&client->dev.kobj, &lm63_group_fan1); + err =sysfs_create_group (&dev->kobj, &lm63_group_fan1);if (err) goto exit_remove_files; }if (data->kind = lm96163) { - err =sysfs_create_group (&client->dev.kobj, - &lm63_group_temp2_type); + err =sysfs_create_group (&dev->kobj, &lm63_group_temp2_type);if (err) goto exit_remove_files; - err =sysfs_create_group (&client->dev.kobj, - &lm63_group_extra_lut); + err =sysfs_create_group (&dev->kobj, &lm63_group_extra_lut);if (err) goto exit_remove_files; } - data->hwmon_dev =hwmon_device_register (&client->dev); + data->hwmon_dev =hwmon_device_register (dev);if (IS_ERR (data->hwmon_dev)) { err =PTR_ERR (data->hwmon_dev); goto exit_remove_files;
@@ -1162,11 +1162,11 @@ static int lm63_probe(struct i2c_client *client,return 0 ; exit_remove_files: -sysfs_remove_group (&client->dev.kobj, &lm63_group); -sysfs_remove_group (&client->dev.kobj, &lm63_group_fan1); +sysfs_remove_group (&dev->kobj, &lm63_group); +sysfs_remove_group (&dev->kobj, &lm63_group_fan1);if (data->kind = lm96163) { -sysfs_remove_group (&client->dev.kobj, &lm63_group_temp2_type); -sysfs_remove_group (&client->dev.kobj, &lm63_group_extra_lut); +sysfs_remove_group (&dev->kobj, &lm63_group_temp2_type); +sysfs_remove_group (&dev->kobj, &lm63_group_extra_lut); }return err; }
Signature · 7 lines
1.7.9.7 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Hi Guenter,
Quoted 8 lines · Guenter Roeck
client->devis used multiple times in several functions. Introduce dev variable pointing to it to simplify the code.Signed-off-by Guenter Roeck <[email protected]>--- drivers/hwmon/lm63.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)(...)
Retrospectively, this patch should have been last in the series, it would have been much smaller then. But I'm sure you have better things to do that respin this patch series again, so I have applied it as is.
Signature · 7 lines
Jean Delvare Suse L3 Support _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors