zedboard: add Avnet Zedboard support.
PATCH 1/1 zedboard: add Avnet Zedboard support.
From: Spenser Gilliland <[email protected]>
[Thomas: update to recent Buildroot which had renamed several Config.in options, lock down kernel headers version]
--- board/avnet/zedboard/readme.txt | 13 +++++++++++++ configs/zedboard_defconfig | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 45 insertions(+) create mode 100644 board/avnet/zedboard/readme.txt create mode 100644 configs/zedboard_defconfig
board/avnet/zedboard/readme.txt new file +13 -0
@@ -0,0 +1,13 @@ +This is the buildroot board support for the Avnet Zedboard. The Zedboard is +a development board based on the Xilinx Zynq-7000 based All-Programmable +System-On-Chip. + +Zedboard information including schematics, reference designs, and manuals are +available from http://www.zedboard.org . + +To boot the Zedboard using a buildroot generated image copy the following files +to the sdcard: + zynq-zed.dtb -> devicetree.dtb + rootfs.cpio.gz.uboot -> uramdisk.image.gz + uImage -> uImage +
configs/zedboard_defconfig new file +32 -0
@@ -0,0 +1,32 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ARM_ENABLE_NEON=y + +# Lock to 3.8 headers as the kernel is based off 3.8 +BR2_KERNEL_HEADERS_VERSION=y +BR2_DEFAULT_KERNEL_VERSION="3.8" + +BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://github.com/Xilinx/linux-xlnx.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="xilinx-v14.5" +BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq" +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-zed" + +# Root filesystem +BR2_TARGET_ROOTFS_CPIO=y +BR2_TARGET_ROOTFS_CPIO_GZIP=y +BR2_TARGET_ROOTFS_CPIO_UIMAGE=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="zynq_zed" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://github.com/Xilinx/u-boot-xlnx.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="xilinx-v14.5" +BR2_TARGET_UBOOT_FORMAT_ELF=y
Signature · 1 line
1.8.3.2
PATCH 1/1 zedboard: add Avnet Zedboard support.
Quoted 8 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
From: Spenser Gilliland <[email protected]> [Thomas: update to recent Buildroot which had renamed several Config.in options, lock down kernel headers version]
Signed-off-by Spenser Gilliland <[email protected]>Signed-off-by Thomas Petazzoni <[email protected]>
Committed, thanks.
Quoted 4 lines
+++
b/board/avnet/zedboard/readme.txtboard/avnet/zedboard/readme.txt new file +2
-0@@ -0,0 +1,13 @@ +This is the buildroot board support for the Avnet Zedboard. The Zedboard is +a development board based on the Xilinx Zynq-7000 based All-Programmable
board/avnet/zedboard/readme.txt line 12
Quoted 10 lines
board/avnet/zedboard/readme.txt new file +10
-0+System-On-Chip. + +Zedboard information including schematics, reference designs, and manuals are +available from http://www.zedboard.org . + +To boot the Zedboard using a buildroot generated image copy the following files +to the sdcard: + zynq-zed.dtb -> devicetree.dtb + rootfs.cpio.gz.uboot -> uramdisk.image.gz + uImage -> uImage
What about u-boot?
Quoted 7 lines
configs/zedboard_defconfig new file +7
-0+# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="zynq_zed" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://github.com/Xilinx/u-boot-xlnx.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="xilinx-v14.5" +BR2_TARGET_UBOOT_FORMAT_ELF=y
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 zedboard: add Avnet Zedboard support.
Quoted 11 lines · Peter Korsgaard
Quoted 8 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
From: Spenser Gilliland <[email protected]> [Thomas: update to recent Buildroot which had renamed several Config.in options, lock down kernel headers version]
Signed-off-by Spenser Gilliland <[email protected]>Signed-off-by Thomas Petazzoni <[email protected]>Committed, thanks.
Quoted 16 lines
Quoted 4 lines
+++
b/board/avnet/zedboard/readme.txtboard/avnet/zedboard/readme.txt new file +2
-0@@ -0,0 +1,13 @@ +This is the buildroot board support for the Avnet Zedboard. The Zedboard is +a development board based on the Xilinx Zynq-7000 based All-Programmableboard/avnet/zedboard/readme.txt line 12
Quoted 10 lines
board/avnet/zedboard/readme.txt new file +10
-0+System-On-Chip. + +Zedboard information including schematics, reference designs, and manuals are +available from http://www.zedboard.org . + +To boot the Zedboard using a buildroot generated image copy the following files +to the sdcard: + zynq-zed.dtb -> devicetree.dtb + rootfs.cpio.gz.uboot -> uramdisk.image.gz + uImage -> uImageWhat about u-boot?
Building u-boot for the zed board is not difficult the problem is the convoluted wrapper which requires the XIlinx tools in order to install it. I can add directions to the readme.
The basic process is.
source <path/to/xilinx/settings.sh>
cat <<EOF > boot.bif
{
[bootloader]<path/to/fsbl.elf>
<path/to/system.bit>
<path/to/uboot.elf>
}
bootgen -image boot.bif -o i BOOT.BIN
This file then needs to be placed on the SD Card.
Quoted 15 lines
configs/zedboard_defconfig line 32
Quoted 8 lines
configs/zedboard_defconfig new file +7
-0+# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="zynq_zed" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://github.com/Xilinx/u-boot-xlnx.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="xilinx-v14.5" +BR2_TARGET_UBOOT_FORMAT_ELF=y--
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 3 lines
Spenser Gilliland Computer Engineer Doctoral Candidate
PATCH 1/1 zedboard: add Avnet Zedboard support.
Dear Spenser Gilliland,
Quoted 10 lines · Spenser Gilliland
Quoted 1 line
What about u-boot?
Building u-boot for the zed board is not difficult the problem is the convoluted wrapper which requires the XIlinx tools in order to install it. I can add directions to the readme.
The basic process is.
source <
path/to/xilinx/settings.sh>
cat <<EOF > boot.bif
Quoted 8 lines
{ [bootloader]<path/to/fsbl.elf> <path/to/system.bit> <path/to/uboot.elf> }bootgen -image boot.bif -o i BOOT.BIN
This file then needs to be placed on the SD Card.
Since we're building u-boot, I believe it makes sense to indicate in the README how to use it. Could you send a followup patch, now that the initial board support has been merged?
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 zedboard: add Avnet Zedboard support.
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni <[email protected]> writes:
This file then needs to be placed on the SD Card.
Since we're building u-boot, I believe it makes sense to indicate in the README how to use it. Could you send a followup patch, now that the initial board support has been merged?
Just what I was going to suggest - Thanks!
Signature · 1 line
Bye, Peter Korsgaard