Pull request
Subsystems (5)
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello Tom,
please pull from u-boot-i2c.git, thanks!
The following changes since commit 0a8e823ad0c5a602c93c2e8a54caf622ade6d3fb:
Prepare v2014.04-rc1 (2014-02-19 16:01:28 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.git master
for you to fetch changes up to 39abd65c342a271d39fa580dc4c5cb7fce516ef3:
arc: remove "hardware.h" (2014-02-20 06:49:19 +0100)
----------------------------------------------------------------
Alexey Brodkin (3):
spear: move CONFIG_SYS_I2C_BASE from arch-spear/hardware to board configs
designware_i2c: remove inclusion of <asm/arch/hardware.h>
arc: remove "hardware.h"
Chin Liang See (1):
designware_i2c: Enhance DesignWare I2C driver address support
Hannes Petermaier (1):
OMAP24xx I2C: Add support for set-speed
Heiko Schocher (1):
i2c, bootcount: add support for bootcounter on i2c devices
Marek Vasut (1):
i2c: i2c-mxs: Wait for I2C to empty queue
Michael Burr (2):
i2c: zynq: Support for 0-length register address
i2c: zynq: Add support for the second i2c controller
Scott Jiang (1):
blackfin: make i2c driver blackfin independant
Sonic Zhang (3):
blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024
blackfin: add spi and i2c specific get clock functions
blackfin: rename bfin-twi_i2c driver to adi_i2c
README | 20 +++++++++ arch/arc/include/asm/arch-arc700/hardware.h | 10 ----- arch/arm/include/asm/arch-spear/hardware.h | 4 -- arch/blackfin/include/asm/blackfin_local.h | 7 --- arch/blackfin/include/asm/clock.h | 11 +++++ arch/blackfin/include/asm/twi.h | 15 +++++++ drivers/bootcount/Makefile | 1 + drivers/bootcount/bootcount_i2c.c | 44 +++++++++++++++++++ drivers/i2c/adi_i2c.c | 387 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/bfin-twi_i2c.c | 3 +- drivers/i2c/designware_i2c.c | 42 ++++-------------- drivers/i2c/mxs_i2c.c | 39 ++++++++++++++--- drivers/i2c/omap24xx_i2c.c | 147 +++++++++++++++++++++++++++++++++++++++++---------------------- drivers/i2c/zynq_i2c.c | 82 ++++++++++++++++++++--------------- drivers/spi/bfin_spi.c | 7 +-- drivers/spi/bfin_spi6xx.c | 7 +-- include/configs/spear-common.h | 9 ++++ include/configs/x600.h | 1 + include/configs/zynq-common.h | 6 +-- include/i2c.h | 1 + 20 files changed, 688 insertions(+), 155 deletions(-)
delete mode 100644 arch/arc/include/asm/arch-arc700/hardware.h create mode 100644 arch/blackfin/include/asm/twi.h create mode 100644 drivers/bootcount/bootcount_i2c.c create mode 100644 drivers/i2c/adi_i2c.c
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
PATCH 1/1 blackfin: Add <asm/clock.h> to numerous drivers
With d6a320d we moved some clock externs out of blackfin_local.h and into clock.h but now need to include <asm/clock.h> in more drivers to avoid warnings.
--- arch/blackfin/lib/board.c | 1 + board/cm-bf548/video.c | 1 + common/cmd_otp.c | 1 + drivers/block/pata_bfin.c | 1 + drivers/mmc/bfin_sdh.c | 1 + drivers/net/bfin_mac.c | 1 + drivers/usb/musb/blackfin_usb.c | 1 + 7 files changed, 7 insertions(+)
arch/blackfin/lib/board.c +1 -0
@@ -23,6 +23,7 @@#include <asm/cplb.h> #include <asm/mach-common/bits/mpu.h> +#include <asm/clock.h> #include <kgdb.h> #ifdef CONFIG_CMD_NAND
board/cm-bf548/video.c +1 -0
@@ -11,6 +11,7 @@#include <config.h> #include <malloc.h> #include <asm/blackfin.h> +#include <asm/clock.h> #include <asm/gpio.h> #include <asm/portmux.h> #include <asm/mach-common/bits/dma.h>
common/cmd_otp.c +1 -0
@@ -18,6 +18,7 @@#include <command.h> #include <asm/blackfin.h> +#include <asm/clock.h> #include <asm/mach-common/bits/otp.h> static const char *otp_strerror (uint32_t err)
drivers/block/pata_bfin.c +1 -0
@@ -12,6 +12,7 @@#include <command.h> #include <config.h> #include <asm/byteorder.h> +#include <asm/clock.h> #include <asm/io.h> #include <asm/errno.h> #include <asm/portmux.h>
drivers/mmc/bfin_sdh.c +1 -0
@@ -15,6 +15,7 @@#include <asm/errno.h> #include <asm/byteorder.h> #include <asm/blackfin.h> +#include <asm/clock.h> #include <asm/portmux.h> #include <asm/mach-common/bits/sdh.h> #include <asm/mach-common/bits/dma.h>
drivers/net/bfin_mac.c +1 -0
@@ -16,6 +16,7 @@#include <linux/mii.h> #include <asm/blackfin.h> +#include <asm/clock.h> #include <asm/portmux.h> #include <asm/mach-common/bits/dma.h> #include <asm/mach-common/bits/emac.h>
drivers/usb/musb/blackfin_usb.c +1 -0
@@ -11,6 +11,7 @@#include <usb.h> #include <asm/blackfin.h> +#include <asm/clock.h> #include <asm/mach-common/bits/usb.h> #include "musb_core.h"
Signature · 1 line
1.7.9.5
PATCH 1/1 blackfin: Add <asm/clock.h> to numerous drivers
Quoted 6 lines · Tom Rini
With d6a320d we moved some clock externs out of
blackfin_local.hand intoclock.hbut now need to include <asm/clock.h> in more drivers to avoid warnings.Cc Sonic Zhang <[email protected]>Signed-off-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140220/09e32fcc/attachment.pgp>
Quoted 63 lines · Heiko Schocher
Hello Tom,
please pull from u-boot-i2c.git, thanks!
The following changes since commit
0a8e823ad0c5a602c93c2e8a54caf622ade6d3fb:Prepare v2014.04-rc1 (2014-02-19 16:01:28 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-i2c.gitmasterfor you to fetch changes up to
39abd65c342a271d39fa580dc4c5cb7fce516ef3:arc: remove "
hardware.h" (2014-02-20 06:49:19 +0100)----------------------------------------------------------------
Alexey Brodkin (3):
spear: moveCONFIG_SYS_I2C_BASEfrom arch-spear/hardware to board configs
designware_i2c: remove inclusion of <asm/arch/hardware.h>
arc: remove "hardware.h"Chin Liang See (1):
designware_i2c: Enhance DesignWare I2C driver address supportHannes Petermaier (1):
OMAP24xx I2C: Add support for set-speedHeiko Schocher (1):
i2c, bootcount: add support for bootcounter on i2c devicesMarek Vasut (1):
i2c: i2c-mxs: Wait for I2C to empty queueMichael Burr (2):
i2c: zynq: Support for 0-length register address
i2c: zynq: Add support for the second i2c controllerScott Jiang (1):
blackfin: make i2c driver blackfin independantSonic Zhang (3):
blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024
blackfin: add spi and i2c specific get clock functions
blackfin: rename bfin-twi_i2c driver toadi_i2cREADME | 20 +++++++++ arch/arc/include/asm/arch-arc700/hardware.h | 10 ----- arch/arm/include/asm/arch-spear/hardware.h | 4 -- arch/blackfin/include/asm/blackfin_local.h | 7 --- arch/blackfin/include/asm/clock.h | 11 +++++ arch/blackfin/include/asm/twi.h | 15 +++++++ drivers/bootcount/Makefile | 1 + drivers/bootcount/bootcount_i2c.c | 44 +++++++++++++++++++ drivers/i2c/adi_i2c.c | 387 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/bfin-twi_i2c.c | 3 +- drivers/i2c/designware_i2c.c | 42 ++++-------------- drivers/i2c/mxs_i2c.c | 39 ++++++++++++++--- drivers/i2c/omap24xx_i2c.c | 147 +++++++++++++++++++++++++++++++++++++++++---------------------- drivers/i2c/zynq_i2c.c | 82 ++++++++++++++++++++--------------- drivers/spi/bfin_spi.c | 7 +-- drivers/spi/bfin_spi6xx.c | 7 +-- include/configs/spear-common.h | 9 ++++
Quoted 8 lines
include/configs/x600.h | 1 + include/configs/zynq-common.h | 6 +-- include/i2c.h | 1 + 20 files changed, 688 insertions(+), 155 deletions(-) delete mode 100644 arch/arc/include/asm/arch-arc700/hardware.h create mode 100644 arch/blackfin/include/asm/twi.h create mode 100644 drivers/bootcount/bootcount_i2c.c create mode 100644 drivers/i2c/adi_i2c.c
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140220/746b619a/attachment.pgp>