Skip to contentSkip to conversation

Pull request

U-Boot New Heiko Schocher 2 participants 4 messages Feb 20, 2014 1 message not in the archive

Subsystems (5)
lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive

Hello Tom,

please pull from u-boot-i2c.git, thanks!

The following changes since commit 0a8e823ad0c5a602c93c2e8a54caf622ade6d3fb:

Prepare v2014.04-rc1 (2014-02-19 16:01:28 -0500)

are available in the git repository at:

git://git.denx.de/u-boot-i2c.git master

for you to fetch changes up to 39abd65c342a271d39fa580dc4c5cb7fce516ef3:

arc: remove "hardware.h" (2014-02-20 06:49:19 +0100)

----------------------------------------------------------------
Alexey Brodkin (3):
spear: move CONFIG_SYS_I2C_BASE from arch-spear/hardware to board configs
designware_i2c: remove inclusion of <asm/arch/hardware.h>
arc: remove "hardware.h"

Chin Liang See (1):
designware_i2c: Enhance DesignWare I2C driver address support

Hannes Petermaier (1):
OMAP24xx I2C: Add support for set-speed

Heiko Schocher (1):
i2c, bootcount: add support for bootcounter on i2c devices

Marek Vasut (1):
i2c: i2c-mxs: Wait for I2C to empty queue

Michael Burr (2):
i2c: zynq: Support for 0-length register address
i2c: zynq: Add support for the second i2c controller

Scott Jiang (1):
blackfin: make i2c driver blackfin independant

Sonic Zhang (3):
blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024
blackfin: add spi and i2c specific get clock functions
blackfin: rename bfin-twi_i2c driver to adi_i2c

  README                                      |  20 +++++++++
  arch/arc/include/asm/arch-arc700/hardware.h |  10 -----
  arch/arm/include/asm/arch-spear/hardware.h  |   4 --
  arch/blackfin/include/asm/blackfin_local.h  |   7 ---
  arch/blackfin/include/asm/clock.h           |  11 +++++
  arch/blackfin/include/asm/twi.h             |  15 +++++++
  drivers/bootcount/Makefile                  |   1 +
  drivers/bootcount/bootcount_i2c.c           |  44 +++++++++++++++++++
  drivers/i2c/adi_i2c.c                       | 387 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  drivers/i2c/bfin-twi_i2c.c                  |   3 +-
  drivers/i2c/designware_i2c.c                |  42 ++++--------------
  drivers/i2c/mxs_i2c.c                       |  39 ++++++++++++++---
  drivers/i2c/omap24xx_i2c.c                  | 147 +++++++++++++++++++++++++++++++++++++++++----------------------
  drivers/i2c/zynq_i2c.c                      |  82 ++++++++++++++++++++---------------
  drivers/spi/bfin_spi.c                      |   7 +--
  drivers/spi/bfin_spi6xx.c                   |   7 +--
  include/configs/spear-common.h              |   9 ++++
  include/configs/x600.h                      |   1 +
  include/configs/zynq-common.h               |   6 +--
  include/i2c.h                               |   1 +
  20 files changed, 688 insertions(+), 155 deletions(-)

delete mode 100644 arch/arc/include/asm/arch-arc700/hardware.h create mode 100644 arch/blackfin/include/asm/twi.h create mode 100644 drivers/bootcount/bootcount_i2c.c create mode 100644 drivers/i2c/adi_i2c.c

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#2 lore raw

PATCH 1/1 blackfin: Add <asm/clock.h> to numerous drivers

With d6a320d we moved some clock externs out of blackfin_local.h and into clock.h but now need to include <asm/clock.h> in more drivers to avoid warnings.

---
 arch/blackfin/lib/board.c       |    1 +
 board/cm-bf548/video.c          |    1 +
 common/cmd_otp.c                |    1 +
 drivers/block/pata_bfin.c       |    1 +
 drivers/mmc/bfin_sdh.c          |    1 +
 drivers/net/bfin_mac.c          |    1 +
 drivers/usb/musb/blackfin_usb.c |    1 +
 7 files changed, 7 insertions(+)
arch/blackfin/lib/board.c +1 -0
index facbc7a..6234201 100644
@@ -23,6 +23,7 @@
 
 #include <asm/cplb.h>
 #include <asm/mach-common/bits/mpu.h>
+#include <asm/clock.h>
 #include <kgdb.h>
 
 #ifdef CONFIG_CMD_NAND
board/cm-bf548/video.c +1 -0
index a43413e..c35d285 100644
@@ -11,6 +11,7 @@
 #include <config.h>
 #include <malloc.h>
 #include <asm/blackfin.h>
+#include <asm/clock.h>
 #include <asm/gpio.h>
 #include <asm/portmux.h>
 #include <asm/mach-common/bits/dma.h>
common/cmd_otp.c +1 -0
index 6f93335..67808aa 100644
@@ -18,6 +18,7 @@
 #include <command.h>
 
 #include <asm/blackfin.h>
+#include <asm/clock.h>
 #include <asm/mach-common/bits/otp.h>
 
 static const char *otp_strerror(uint32_t err)
drivers/block/pata_bfin.c +1 -0
index 27ecaf4..b7fd1cd 100644
@@ -12,6 +12,7 @@
 #include <command.h>
 #include <config.h>
 #include <asm/byteorder.h>
+#include <asm/clock.h>
 #include <asm/io.h>
 #include <asm/errno.h>
 #include <asm/portmux.h>
drivers/mmc/bfin_sdh.c +1 -0
index 2631174..bd9b641 100644
@@ -15,6 +15,7 @@
 #include <asm/errno.h>
 #include <asm/byteorder.h>
 #include <asm/blackfin.h>
+#include <asm/clock.h>
 #include <asm/portmux.h>
 #include <asm/mach-common/bits/sdh.h>
 #include <asm/mach-common/bits/dma.h>
drivers/net/bfin_mac.c +1 -0
index 42e208c..0c2d2ef 100644
@@ -16,6 +16,7 @@
 #include <linux/mii.h>
 
 #include <asm/blackfin.h>
+#include <asm/clock.h>
 #include <asm/portmux.h>
 #include <asm/mach-common/bits/dma.h>
 #include <asm/mach-common/bits/emac.h>
drivers/usb/musb/blackfin_usb.c +1 -0
index 35268ba..65fff88 100644
@@ -11,6 +11,7 @@
 #include <usb.h>
 
 #include <asm/blackfin.h>
+#include <asm/clock.h>
 #include <asm/mach-common/bits/usb.h>
 
 #include "musb_core.h"
Signature · 1 line
1.7.9.5
#4 lore raw
In reply to Heiko Schocher
Quoted 63 lines · Heiko Schocher

Hello Tom,

please pull from u-boot-i2c.git, thanks!

The following changes since commit 0a8e823ad0c5a602c93c2e8a54caf622ade6d3fb:

Prepare v2014.04-rc1 (2014-02-19 16:01:28 -0500)

are available in the git repository at:

git://git.denx.de/u-boot-i2c.git master

for you to fetch changes up to 39abd65c342a271d39fa580dc4c5cb7fce516ef3:

arc: remove "hardware.h" (2014-02-20 06:49:19 +0100)

----------------------------------------------------------------
Alexey Brodkin (3):
spear: move CONFIG_SYS_I2C_BASE from arch-spear/hardware to board configs
designware_i2c: remove inclusion of <asm/arch/hardware.h>
arc: remove "hardware.h"

Chin Liang See (1):
designware_i2c: Enhance DesignWare I2C driver address support

Hannes Petermaier (1):
OMAP24xx I2C: Add support for set-speed

Heiko Schocher (1):
i2c, bootcount: add support for bootcounter on i2c devices

Marek Vasut (1):
i2c: i2c-mxs: Wait for I2C to empty queue

Michael Burr (2):
i2c: zynq: Support for 0-length register address
i2c: zynq: Add support for the second i2c controller

Scott Jiang (1):
blackfin: make i2c driver blackfin independant

Sonic Zhang (3):
blackfin: the sclk MHz in i2c driver should be divided by 1000 other than 1024
blackfin: add spi and i2c specific get clock functions
blackfin: rename bfin-twi_i2c driver to adi_i2c

 README                                      |  20 +++++++++
 arch/arc/include/asm/arch-arc700/hardware.h |  10 -----
 arch/arm/include/asm/arch-spear/hardware.h  |   4 --
 arch/blackfin/include/asm/blackfin_local.h  |   7 ---
 arch/blackfin/include/asm/clock.h           |  11 +++++
 arch/blackfin/include/asm/twi.h             |  15 +++++++
 drivers/bootcount/Makefile                  |   1 +
 drivers/bootcount/bootcount_i2c.c           |  44 +++++++++++++++++++
 drivers/i2c/adi_i2c.c                       | 387 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/i2c/bfin-twi_i2c.c                  |   3 +-
 drivers/i2c/designware_i2c.c                |  42 ++++--------------
 drivers/i2c/mxs_i2c.c                       |  39 ++++++++++++++---
 drivers/i2c/omap24xx_i2c.c                  | 147 +++++++++++++++++++++++++++++++++++++++++----------------------
 drivers/i2c/zynq_i2c.c                      |  82 ++++++++++++++++++++---------------
 drivers/spi/bfin_spi.c                      |   7 +--
 drivers/spi/bfin_spi6xx.c                   |   7 +--
 include/configs/spear-common.h              |   9 ++++
Quoted 8 lines
 include/configs/x600.h                      |   1 +
 include/configs/zynq-common.h               |   6 +--
 include/i2c.h                               |   1 +
 20 files changed, 688 insertions(+), 155 deletions(-)
 delete mode 100644 arch/arc/include/asm/arch-arc700/hardware.h
 create mode 100644 arch/blackfin/include/asm/twi.h
 create mode 100644 drivers/bootcount/bootcount_i2c.c
 create mode 100644 drivers/i2c/adi_i2c.c

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140220/746b619a/attachment.pgp>
#3 lore raw

PATCH 1/1 blackfin: Add <asm/clock.h> to numerous drivers

In reply to Tom Rini
Quoted 6 lines · Tom Rini

With d6a320d we moved some clock externs out of blackfin_local.h and into clock.h but now need to include <asm/clock.h> in more drivers to avoid warnings.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140220/09e32fcc/attachment.pgp>