U-Boot: could not cross-compile u-boot tools
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hello all,
just noticed, that it is not longer possible to cross-compile the u-boot tools:
"Older" U-Boot (= before kbuild changes), could cross-compile the u-boot tools:
$ git log commit 9137d19bdd321b810275f2e967e3a39165a4e8de Author: Heiko Schocher <[email protected]> Date: Thu Jan 30 11:02:13 2014 +0100
net, phy: atheros ar803x bug
[...]
$ make mrproper
$ make IDS8247_config
Configuring for IDS8247 board...
$ make HOSTCC=${CROSS_COMPILE}gcc HOSTSTRIP=${CROSS_COMPILE}strip -s tools
$ powerpc-linux-objdump -f tools/mkimagetools/mkimage: file format elf32-powerpc
architecture: powerpc:common, flags 0x00000112:EXEC_P, HAS_SYMS, D_PAGED
start address 0x10001320
With current mainline:
$ git checkout master Gewechselt zu Zweig 'master' $ make mrproper $ make IDS8247_config Configuring for IDS8247 board... $ make CROSS_COMPILE=powerpc-linux- -s tools $ powerpc-linux-objdump -f tools/mkimage
tools/mkimage: file format elf64-little
architecture: UNKNOWN!, flags 0x00000112:EXEC_P, HAS_SYMS, D_PAGED
start address 0x00000000004019c8
$ objdump -f tools/mkimage
tools/mkimage: file format elf64-x86-64
architecture: i386:x86-64, flags 0x00000112:EXEC_P, HAS_SYMS, D_PAGED
start address 0x00000000004019c8
$ make HOSTCC=${CROSS_COMPILE}gcc HOSTSTRIP=${CROSS_COMPILE}strip -s tools
/lib/ld.so.1: No such file or directory
make[1]: *** [scripts/basic/fixdep] Fehler 255
make: *** [scripts_basic] Fehler 2
$Is this a Bug, which should be fixed? Any hints?
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Quoted 49 lines · Heiko Schocher
Hello all,
just noticed, that it is not longer possible to cross-compile the u-boot tools:
"Older" U-Boot (= before kbuild changes), could cross-compile the u-boot tools:
$ git log commit 9137d19bdd321b810275f2e967e3a39165a4e8de Author: Heiko Schocher <[email protected]> Date: Thu Jan 30 11:02:13 2014 +0100net, phy: atheros ar803x bug
[...]$ make mrproper $ make IDS8247_config Configuring for IDS8247 board... $ make HOSTCC=${CROSS_COMPILE}gcc HOSTSTRIP=${CROSS_COMPILE}strip -s tools $ powerpc-linux-objdump -f tools/mkimage
tools/mkimage: file format elf32-powerpc
architecture: powerpc:common, flags0x00000112:EXEC_P,HAS_SYMS,D_PAGED
start address0x10001320With current mainline:
$ git checkout master Gewechselt zu Zweig 'master' $ make mrproper $ make IDS8247_config Configuring for IDS8247 board... $ make CROSS_COMPILE=powerpc-linux- -s tools $ powerpc-linux-objdump -f tools/mkimage
tools/mkimage: file format elf64-little
architecture: UNKNOWN!, flags0x00000112:EXEC_P,HAS_SYMS,D_PAGED
start address0x00000000004019c8$ objdump -f tools/mkimage
tools/mkimage: file format elf64-x86-64
architecture: i386:x86-64, flags0x00000112:EXEC_P,HAS_SYMS,D_PAGED
start address0x00000000004019c8
Quoted 7 lines
$ make HOSTCC=${CROSS_COMPILE}gcc HOSTSTRIP=${CROSS_COMPILE}strip -s tools /lib/ld.so.1: No such file or directory make[1]: *** [scripts/basic/fixdep] Fehler 255 make: *** [scripts_basic] Fehler 2 $Is this a Bug, which should be fixed? Any hints?
It seems like we need to pick up
http://lists.linaro.org/pipermail/linaro-kernel/2013-August/005772.html
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140227/87d59f53/attachment.pgp>
Hello Tom,
Am 27.02.2014 15:30, schrieb Tom Rini:
Quoted 6 lines · Heiko Schocher
Quoted 5 lines
Hello all,
just noticed, that it is not longer possible to cross-compile the u-boot tools:
[...]
Quoted 28 lines
Quoted 28 lines
With current mainline:
$ git checkout master Gewechselt zu Zweig 'master' $ make mrproper $ make IDS8247_config Configuring for IDS8247 board... $ make CROSS_COMPILE=powerpc-linux- -s tools $ powerpc-linux-objdump -f tools/mkimage
tools/mkimage: file format elf64-little
architecture: UNKNOWN!, flags0x00000112:EXEC_P,HAS_SYMS,D_PAGED
start address0x00000000004019c8$ objdump -f tools/mkimage
tools/mkimage: file format elf64-x86-64
architecture: i386:x86-64, flags0x00000112:EXEC_P,HAS_SYMS,D_PAGED
start address0x00000000004019c8$ make HOSTCC=${CROSS_COMPILE}gcc HOSTSTRIP=${CROSS_COMPILE}strip -s tools /lib/ld.so.1: No such file or directory make[1]: *** [scripts/basic/fixdep] Fehler 255 make: *** [scripts_basic] Fehler 2 $
Quoted 4 lines
Quoted 1 line
Is this a Bug, which should be fixed? Any hints?
It seems like we need to pick up
http://lists.linaro.org/pipermail/linaro-kernel/2013-August/005772.html
Yes, this seems a way to go...
@Masahiro: What is your opinion?
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hello Heiko,
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Is this a Bug, which should be fixed? Any hints?
It seems like we need to pick up
http://lists.linaro.org/pipermail/linaro-kernel/2013-August/005772.htmlYes, this seems a way to go...
@Masahiro: What is your opinion?
Hmm, I don't like such a patch because
[1] It changes too much
[2] We must build tools in two steps.
First time, build tools for host
make O=path/to/buildhost/ silentoldconfig prepare scripts
Second time, built tools for the target
make HOSTCC=$CROSS_COMPILE \
KBUILD_SCRIPTROOT=path/to/buildhost/
silentoldconfig prepare scripts
It seems ridiculous to type so many magic commands.
Heiko, can you check if the following works for you?
Modify tools/Makefile as follows
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -5,6 +5,10 @@
# SPDX-License-Identifier: GPL-2.0+
#
+ifneq ($(CROSS_BUILD_TOOLS),)
+HOSTCC = $(CC)
+endif
+
#
# toolchains targeting win32 generate .exe files
#Usage:
Build tools for host
make CROSS_COMPILE=<your_gcc_prefix> tools
Build tools for target
make CROSS_BUILD_TOOLS=1 CROSS_COMPILE=<your_gcc_prefix> tools
This is my log.
$ make IDS8247_config Configuring for IDS8247 board... $ make CROSS_COMPILE=powerpc-linux-gnu- CROSS_BUILD_TOOLS=1 tools GEN include/autoconf.mk.dep GEN include/autoconf.mk CHK include/config/uboot.release UPD include/config/uboot.release CHK include/generated/version_autogenerated.h UPD include/generated/version_autogenerated.h CHK include/generated/timestamp_autogenerated.h UPD include/generated/timestamp_autogenerated.h HOSTCC scripts/basic/fixdep CC lib/asm-offsets.s GEN include/generated/generic-asm-offsets.h HOSTCC tools/aisimage.o HOSTCC tools/crc32.o HOSTCC tools/default_image.o HOSTCC tools/dumpimage.o HOSTCC tools/env_embedded.o HOSTCC tools/envcrc.o HOSTCC tools/fdt.o HOSTCC tools/fdt_ro.o HOSTCC tools/fdt_rw.o HOSTCC tools/fdt_strerror.o HOSTCC tools/fdt_wip.o HOSTCC tools/fit_image.o HOSTCC tools/image-fit.o HOSTCC tools/image-host.o HOSTCC tools/image.o HOSTCC tools/imagetool.o HOSTCC tools/imximage.o HOSTCC tools/kwbimage.o HOSTCC tools/md5.o HOSTCC tools/mkenvimage.o HOSTCC tools/mkimage.o HOSTCC tools/mxsimage.o HOSTCC tools/omapimage.o HOSTCC tools/os_support.o HOSTCC tools/pblimage.o HOSTCC tools/sha1.o HOSTCC tools/ublimage.o HOSTLD tools/envcrc HOSTCC tools/gen_eth_addr HOSTCC tools/img2srec HOSTLD tools/mkenvimage HOSTLD tools/dumpimage HOSTLD tools/mkimage HOSTCC tools/proftool $ file tools/mkimage tools/mkimage: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]=0xb76ad5a10a41700fcab9e86c079118c424446d89, with unknown capability 0x41000000 = 0xf676e75, with unknown capability 0x10000 = 0x70401, not stripped
Uknown Issue:
Tools are not stripped.
Too big for your target board?
Best Regards
Masahiro Yamada
Hallo Masahiro,
Am 28.02.2014 10:03, schrieb Masahiro Yamada:
Quoted 7 lines
Hello Heiko,
Quoted 5 lines
Quoted 4 lines
Quoted 1 line
Is this a Bug, which should be fixed? Any hints?
It seems like we need to pick up
http://lists.linaro.org/pipermail/linaro-kernel/2013-August/005772.html
Quoted 6 lines
Quoted 3 lines
Yes, this seems a way to go...
@Masahiro: What is your opinion?
Hmm, I don't like such a patch because
[1] It changes too much
Ok, if there is an easier way, that would be great!
Quoted 8 lines
[2] We must build tools in two steps.
First time, build tools for host
make O=path/to/buildhost/ silentoldconfig prepare scripts
Second time, built tools for the target
make HOSTCC=$CROSS_COMPILE \
KBUILD_SCRIPTROOT=path/to/buildhost/
silentoldconfig prepare scripts
It seems ridiculous to type so many magic commands.
But it should be possible to compile the "tools" for the target. If this a serperate build step, that is as it was before the kbuild changes, so that should be no problem.
Quoted 20 lines
Heiko, can you check if the following works for you?
Modify
tools/Makefileas follows--- a/tools/Makefile +++ b/tools/Makefile @@ -5,6 +5,10 @@ # SPDX-License-Identifier: GPL-2.0+ # +ifneq ($(CROSS_BUILD_TOOLS),) +HOSTCC = $(CC) +endif + # # toolchains targeting win32 generate .exe files #
Quoted 5 lines
Usage:
Build tools for host
make CROSS_COMPILE=<your_gcc_prefix> tools
Build tools for target
make CROSS_BUILD_TOOLS=1 CROSS_COMPILE=<your_gcc_prefix> tools
Yep, works, great!
Quoted 3 lines
This is my log.
$ make IDS8247_config
[...]
Quoted 8 lines
$ file tools/mkimage tools/mkimage: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.32, BuildID[sha1]=0xb76ad5a10a41700fcab9e86c079118c424446d89, with unknown capability 0x41000000 = 0xf676e75, with unknown capability 0x10000 = 0x70401, not strippedUknown Issue:
Tools are not stripped.
Too big for your target board?
strip them would be nice ...
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Dear Heiko & Masahiro,
Quoted 8 lines · In message <[email protected]> you wrote:
Quoted 6 lines
Usage:
Build tools for host
make CROSS_COMPILE=<your_gcc_prefix> tools
Build tools for target
make CROSS_BUILD_TOOLS=1 CROSS_COMPILE=<your_gcc_prefix> toolsYep, works, great!
I'm not really hapy with the additional CROSS_BUILD_TOOLS paramert - but this may be a matter of taste, so the following is just a thought and a question:
Would it make more sense to provide a sparate make target instead?
Say, something like this:
Build tools for host
make CROSS_COMPILE=<your_gcc_prefix tools
Build tools for target
make CROSS_COMPILE=<your_gcc_prefix cross_tools
?
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] Comparing information and knowledge is like asking whether the fatness of a pig is more or less green than the designated hitter rule." - David Guaspari
Quoted 18 lines · Wolfgang Denk
Dear Heiko & Masahiro,
Quoted 8 lines · In message <[email protected]> you wrote:
Quoted 6 lines
Usage:
Build tools for host
make CROSS_COMPILE=<your_gcc_prefix> tools
Build tools for target
make CROSS_BUILD_TOOLS=1 CROSS_COMPILE=<your_gcc_prefix> toolsYep, works, great!
I'm not really hapy with the additional
CROSS_BUILD_TOOLSparamert - but this may be a matter of taste, so the following is just a thought and a question:Would it make more sense to provide a sparate make target instead?
Quoted 8 lines
Say, something like this:
Build tools for host
make CROSS_COMPILE=<your_gcc_prefix tools
Build tools for target
make CROSS_COMPILE=<your_gcc_prefixcross_tools?
I agree, this seems more natural.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140228/9fa31ae4/attachment.pgp>