hwmon, k10temp: Add support for AMD F16 M30h processor
PATCH 1/1 hwmon, k10temp: Add support for AMD F16 M30h processor
Adding new PCI ID to support AMD F16 M30h processor (Mullins). While at it, modify Kconfig and Doc files to reflect the support for newer processors
Note: PCI ID for this processor will make it into pci_ids.h as part of this patch:
http://marc.info/?l=linux-kernel&m=139291362126057&w=2
which should be pulled into 3.15 when merge window opens (It currently sits in 'for-next' branch of bp.git-
https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next)
--- Documentation/hwmon/k10temp | 6 +++--- drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/k10temp.c | 1 + 3 files changed, 6 insertions(+), 5 deletions(-)
Documentation/hwmon/k10temp +3 -3
@@ -11,8 +11,8 @@ Supported chips: Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series) * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series) -* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity" -* AMD Family 16h processors: "Kabini" +* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri" +* AMD Family 16h processors: "Kabini", "Mullins" Prefix: 'k10temp' Addresses scanned: PCI space
@@ -46,7 +46,7 @@ Description ----------- This driver permits reading of the internal temperature sensor of AMD -Family 10h/11h/12h/14h/15h processors. +Family 10h/11h/12h/14h/15h/16h processors. All these processors have a sensor, but on those for Socket F or AM2+, the sensor may return inconsistent values (erratum 319). The driver
drivers/hwmon/Kconfig +2 -2
@@ -296,8 +296,8 @@ config SENSORS_K10TEMP If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of the AMD Family 10h and all revisions of the AMD Family 11h, - 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and - 16h (Kabini) microarchitectures. + 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri) and + 16h (Kabini/Mullins) microarchitectures. This driver can also be built as a module. If so, the module will be called k10temp.
drivers/hwmon/k10temp.c +1 -0
@@ -212,6 +212,7 @@ static const struct pci_device_id k10temp_id_table[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) }, {} };MODULE_DEVICE_TABLE (pci, k10temp_id_table);
Signature · 1 line
1.8.1.2
Guenter Roeck
maintainerQuoted 4 lines · Aravind Gopalakrishnan
Adding new PCI ID to support AMD F16 M30h processor (Mullins). While at it, modify
Kconfigand Doc files to reflect the support for newer processors
Quoted 8 lines
Note: PCI ID for this processor will make it into
pci_ids.has part of this patch:
http://marc.info/?l=linux-kernel&m9291362126057&w=2
which should be pulled into 3.15 when merge window opens (It currently sits in 'for-next' branch of bp.git-
https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next)Signed-off-by Aravind Gopalakrishnan <[email protected]>
Looks good. We'll have to see how we can apply this; probably after 3.15-rc1 comes out. I'll put it into my -staging branch for now and pull in the other patch as well to make sure it compiles.
Guenter
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 12 lines · Guenter Roeck
Quoted 11 lines · Aravind Gopalakrishnan
Adding new PCI ID to support AMD F16 M30h processor (Mullins). While at it, modify
Kconfigand Doc files to reflect the support for newer processorsNote: PCI ID for this processor will make it into
pci_ids.has part of this patch:
http://marc.info/?l=linux-kernel&m9291362126057&w=2
which should be pulled into 3.15 when merge window opens (It currently sits in 'for-next' branch of bp.git-
https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next)
Quoted 5 lines
Quoted 1 line
Signed-off-by Aravind Gopalakrishnan <[email protected]>Looks good. We'll have to see how we can apply this; probably after 3.15-rc1 comes out. I'll put it into my -staging branch for now and pull in the other patch as well to make sure it compiles.
I've updated the wiki accordingly, as well as sensors-detect.
Signature · 7 lines
Jean Delvare SUSE L3 Support _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 7 lines · Jean Delvare
Quoted 4 lines · Guenter Roeck
Looks good. We'll have to see how we can apply this; probably after 3.15-rc1 comes out. I'll put it into my -staging branch for now and pull in the other patch as well to make sure it compiles.
I've updated the wiki accordingly, as well as sensors-detect.
Thanks!
-Aravind.
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors