Skip to contentSkip to conversation

hwmon, k10temp: Add support for AMD F16 M30h processor

PATCH In review Aravind Gopalakrishnan 3 participants 4 messages Mar 11, 2014 – Mar 12, 2014

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 hwmon, k10temp: Add support for AMD F16 M30h processor

Adding new PCI ID to support AMD F16 M30h processor (Mullins). While at it, modify Kconfig and Doc files to reflect the support for newer processors

Note: PCI ID for this processor will make it into pci_ids.h as part of this patch:
http://marc.info/?l=linux-kernel&m=139291362126057&w=2
which should be pulled into 3.15 when merge window opens (It currently sits in 'for-next' branch of bp.git-
https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next)

---
 Documentation/hwmon/k10temp | 6 +++---
 drivers/hwmon/Kconfig       | 4 ++--
 drivers/hwmon/k10temp.c     | 1 +
 3 files changed, 6 insertions(+), 5 deletions(-)
Documentation/hwmon/k10temp +3 -3
index 4dfdc8f..ee6d30e 100644
@@ -11,8 +11,8 @@ Supported chips:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
 * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
 * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
-* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity"
-* AMD Family 16h processors: "Kabini"
+* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri"
+* AMD Family 16h processors: "Kabini", "Mullins"
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -46,7 +46,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h/11h/12h/14h/15h processors.
+Family 10h/11h/12h/14h/15h/16h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver
drivers/hwmon/Kconfig +2 -2
index 5ce43d8..83db056 100644
@@ -296,8 +296,8 @@ config SENSORS_K10TEMP
 	  If you say yes here you get support for the temperature
 	  sensor(s) inside your CPU. Supported are later revisions of
 	  the AMD Family 10h and all revisions of the AMD Family 11h,
-	  12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
-	  16h (Kabini) microarchitectures.
+	  12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri) and
+	  16h (Kabini/Mullins) microarchitectures.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called k10temp.
drivers/hwmon/k10temp.c +1 -0
index baf375b..f7b46f6 100644
@@ -212,6 +212,7 @@ static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, k10temp_id_table);
Signature · 1 line
1.8.1.2
maintainer
#1 lore raw
Quoted 4 lines · Aravind Gopalakrishnan

Adding new PCI ID to support AMD F16 M30h processor (Mullins). While at it, modify Kconfig and Doc files to reflect the support for newer processors

Quoted 8 lines

Note: PCI ID for this processor will make it into pci_ids.h as part of this patch:
http://marc.info/?l=linux-kernel&m9291362126057&w=2
which should be pulled into 3.15 when merge window opens (It currently sits in 'for-next' branch of bp.git-
https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next)

Looks good. We'll have to see how we can apply this; probably after 3.15-rc1 comes out. I'll put it into my -staging branch for now and pull in the other patch as well to make sure it compiles.

Guenter

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

#2 lore raw
Quoted 12 lines · Guenter Roeck
Quoted 11 lines · Aravind Gopalakrishnan

Adding new PCI ID to support AMD F16 M30h processor (Mullins). While at it, modify Kconfig and Doc files to reflect the support for newer processors

Note: PCI ID for this processor will make it into pci_ids.h as part of this patch:
http://marc.info/?l=linux-kernel&m9291362126057&w=2
which should be pulled into 3.15 when merge window opens (It currently sits in 'for-next' branch of bp.git-
https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next)

Quoted 5 lines
Quoted 1 line

Looks good. We'll have to see how we can apply this; probably after 3.15-rc1 comes out. I'll put it into my -staging branch for now and pull in the other patch as well to make sure it compiles.

I've updated the wiki accordingly, as well as sensors-detect.

Signature · 7 lines
Jean Delvare
SUSE L3 Support

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
#3 lore raw
Quoted 7 lines · Jean Delvare
Quoted 4 lines · Guenter Roeck

Looks good. We'll have to see how we can apply this; probably after 3.15-rc1 comes out. I'll put it into my -staging branch for now and pull in the other patch as well to make sure it compiles.

I've updated the wiki accordingly, as well as sensors-detect.

Thanks!

-Aravind.

_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors