ARM: dts: add initial Colibri VF61 board support
cover ARM: dts: add initial Colibri VF61 board support
From: Stefan Agner <[email protected]>
This patches add initial support for Toradex Colibri VF61 computer-on-module.
Stefan Agner (2):
of: add vendor prefix for Toradex AG
ARM: dts: add initial Colibri VF61 board support
.../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/vf610-colibri.dts | 123 +++++++++++++++++++++ 3 files changed, 125 insertions(+) create mode 100644 arch/arm/boot/dts/vf610-colibri.dts
Signature · 1 line
1.9.1
PATCH 1/2 of: add vendor prefix for Toradex AG
From: Stefan Agner <[email protected]>
Adds toradex to the list of DT vendor prefixes.
--- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
@@ -91,6 +91,7 @@ ti Texas Instruments tlm Trusted Logic Mobility toshiba Toshiba Corporation toumaz Toumaz +toradex Toradex AG v3 V3 Semiconductor via VIA Technologies, Inc. voipac Voipac Technologies s.r.o.
Signature · 1 line
1.9.1
PATCH 1/2 of: add vendor prefix for Toradex AG
Quoted 5 lines · On Wed, Apr 2, 2014 at 11:47 AM, <[email protected]> wrote:
From: Stefan Agner <[email protected]>
Adds toradex to the list of DT vendor prefixes.
Signed-off-by Stefan Agner <[email protected]>
Quoted 24 lines
--- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/vendor-prefixes.txt +1
-1@@ -91,6 +91,7 @@ ti Texas Instruments tlm Trusted Logic Mobility toshiba Toshiba Corporation toumaz Toumaz +toradex Toradex AG v3 V3 Semiconductor via VIA Technologies, Inc. voipac Voipac Technologies s.r.o. --1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
PATCH 1/2 of: add vendor prefix for Toradex AG
In reply to stefan at agner.chHi,
Quoted 14 lines · stefan at agner.ch
From: Stefan Agner <[email protected]>
Adds toradex to the list of DT vendor prefixes.
Signed-off-by Stefan Agner <[email protected]>--- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+)Documentation/devicetree/bindings/vendor-prefixes.txt +0
-0
Documentation/devicetree/bindings/vendor-prefixes.txt ti Texas Instruments · line 94
Quoted 4 lines
Documentation/devicetree/bindings/vendor-prefixes.txt +1
-0@@ -91,6 +91,7 @@ ti Texas Instruments tlm Trusted Logic Mobility toshiba Toshiba Corporation toumaz Toumaz +toradex Toradex AG
The alphabet seems to be a concept that is very hard to grasp for programmers... ;)
In my version 'r' is located before 's'.
Lothar Wa?mann
Signature · 9 lines
___________________________________________________________ Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Gesch?ftsf?hrer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info at karo-electronics.de ___________________________________________________________
PATCH 2/2 ARM: dts: add initial Colibri VF61 board support
In reply to stefan at agner.chFrom: Stefan Agner <[email protected]>
Add initial Toradex Colibri VF61 board support. Ethernet, UART and SDHC cards are working. Cache latencies need to be a bit higher than vf610.dtsi suggests. Those values are validated by running multiple memory tests.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/vf610-colibri.dts | 123 ++++++++++++++++++++++++++++++++++++ 2 files changed, 124 insertions(+) create mode 100644 arch/arm/boot/dts/vf610-colibri.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -190,6 +190,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ + vf610-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
arch/arm/boot/dts/vf610-colibri.dts new file +123 -0
123 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH 2/2 ARM: dts: add initial Colibri VF61 board support
Quoted 8 lines · stefan at agner.ch
From: Stefan Agner <[email protected]>
Add initial Toradex Colibri VF61 board support. Ethernet, UART and SDHC cards are working. Cache latencies need to be a bit higher than
vf610.dtsisuggests. Those values are validated by running multiple memory tests.Signed-off-by Stefan Agner <[email protected]>
Looks good to me. Only one minor comment below.
Quoted 49 lines
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/vf610-colibri.dts | 123 ++++++++++++++++++++++++++++++++++++ 2 files changed, 124 insertions(+) create mode 100644 arch/arm/boot/dts/vf610-colibri.dtsarch/arm/boot/dts/Makefile +1
-0@@ -190,6 +190,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ + vf610-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \arch/arm/boot/dts/vf610-colibri.dts new file +25
-0@@ -0,0 +1,123 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "Toradex Colibri VF61 COM"; + compatible = "toradex,vf610-colibri", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200"; + }; + + memory { + reg = <0x80000000 0x10000000>; + }; + + clocks {
arch/arm/boot/dts/vf610-colibri.dts line 35
Quoted 10 lines
arch/arm/boot/dts/vf610-colibri.dts new file +10
-0+ enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + +}; + +&iomuxc {
I would suggest to put this node at the bottom of the file, since it will have a lot more data than other nodes. Doing so will make reading of the file a little easier.
Shawn
Quoted 91 lines
arch/arm/boot/dts/vf610-colibri.dts new file +88
-0+ vf610-colibri { + pinctrl_esdhc1: esdhc1grp { + fsl,fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&L2 { + arm,data-latency = <2 1 2>; + arm,tag-latency = <3 2 3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +};Signature · 1 line
1.9.1