Skip to contentSkip to conversation

CCF support for Renesas r7s72100

PATCH Superseded Wolfram Sang 3 participants 17 messages Apr 28, 2014 – Apr 29, 2014

Subsystems (7)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover CCF support for Renesas r7s72100

This series moves the r7s72100 platfrom from the legacy clock implementation to the common clock framework.

This series has been tested with the renesas-devel-v3.15-rc2-20140428 tag. If you want to boot into a console, you have a runtime dependency [1].

Changes since V3:

* rebased and tested against latest renesas/devel-tag
* using the new "clock-indices" binding
* reordered patches to skip the workaround entry for scif2
* moved serial aliases from the dtsi to the board file (and kept the numbering according to the legacy board code)
* updated my email-address

The workaround in the last patch could be avoided once the DT patches for MTU2 are available. Or we include the patch right now and clean the little bit up later in an incremental fashion. Please apply.

Thanks,

Wolfram

PS: A tree can be found here with this series and the dependency patch:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/r7s-ccf

[1] http://www.spinics.net/lists/linux-sh/msg30918.html (clk: shmobile: clk-mstp: change to using clock-indices)

Wolfram Sang (11):
ARM: shmobile: r7s72100: document MSTP clock support
ARM: shmobile: r7s72100: add essential clock nodes to dtsi
ARM: shmobile: r7s72100: genmai: populate nodes for external clocks
ARM: shmobile: r7s72100: add scif nodes to dtsi
ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2
as console
ARM: shmobile: r7s72100: genmai: platform scif devices only for legacy
support
ARM: shmobile: r7s72100: add i2c clocks to dtsi
ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock
support
ARM: shmobile: r7s72100: add spi clocks to dtsi
ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock
support
ARM: shmobile: r7s72100: use workaround for non DT-clocks

 .../bindings/clock/renesas,cpg-mstp-clocks.txt     |   1 +
 arch/arm/boot/dts/r7s72100-genmai-reference.dts    |  26 ++-
 arch/arm/boot/dts/r7s72100.dtsi                    | 215 ++++++++++++++++++++-
 arch/arm/mach-shmobile/board-genmai-reference.c    |  14 +-
 arch/arm/mach-shmobile/board-genmai.c              |  44 +++++
 arch/arm/mach-shmobile/clock-r7s72100.c            |   9 -
 arch/arm/mach-shmobile/setup-r7s72100.c            |  43 -----
 include/dt-bindings/clock/r7s72100-clock.h         |  41 ++++
 8 files changed, 337 insertions(+), 56 deletions(-)
 create mode 100644 include/dt-bindings/clock/r7s72100-clock.h
Signature · 1 line
1.9.2
#1 lore raw

PATCH v4 1/11 ARM: shmobile: r7s72100: document MSTP clock support

From: Wolfram Sang <[email protected]>

---
 Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +1 -0
index 02a25d99ca61..6c3c0847e4fd 100644
@@ -10,6 +10,7 @@ index in the group, from 0 to 31.
 Required Properties:
 
   - compatible: Must be one of the following
+    - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
     - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
     - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
     - "renesas,cpg-mstp-clock" for generic MSTP gate clocks
Signature · 1 line
1.9.2
#2 lore raw

PATCH v4 2/11 ARM: shmobile: r7s72100: add essential clock nodes to dtsi

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

Only essential clocks are added for now. Other clocks will be added when needed.

---
 arch/arm/boot/dts/r7s72100.dtsi            | 86 +++++++++++++++++++++++++++++-
 include/dt-bindings/clock/r7s72100-clock.h | 28 ++++++++++
 2 files changed, 113 insertions(+), 1 deletion(-)
 create mode 100644 include/dt-bindings/clock/r7s72100-clock.h
arch/arm/boot/dts/r7s72100.dtsi +85 -1
index ee700717a34b..5a6e2481b567 100644
@@ -1,13 +1,15 @@
 /*
  * Device Tree Source for the r7s72100 SoC
  *
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <[email protected]>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */
 
+#include <dt-bindings/clock/r7s72100-clock.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -28,6 +30,88 @@
 		spi4 = &spi4;
 	};
 
+	clocks {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* External clocks */
+		extal_clk: extal_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		usb_x1_clk: usb_x1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board */
+			clock-frequency = <0>;
+			clock-output-names = "usb_x1";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks at fcfe0000 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-cpg-clocks",
+				     "renesas,rz-cpg-clocks";
+			reg = <0xfcfe0000 0x18>;
+			clocks = <&extal_clk>, <&usb_x1_clk>;
+			clock-output-names = "pll", "i", "g";
+		};
+
+		/* Fixed factor clocks */
+		b_clk: b_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+			clock-mult = <1>;
+			clock-div = <3>;
+			clock-output-names = "b";
+		};
+		p1_clk: p1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+			clock-mult = <1>;
+			clock-div = <6>;
+			clock-output-names = "p1";
+		};
+		p0_clk: p0_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+			clock-mult = <1>;
+			clock-div = <12>;
+			clock-output-names = "p0";
+		};
+
+		/* MSTP clocks */
+		mstp3_clks: mstp3_clks at fcfe0420 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0420 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_MTU2>;
+			clock-output-names = "mtu2";
+		};
+
+		mstp4_clks: mstp4_clks at fcfe0424 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0424 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
+				R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
+			>;
+			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
include/dt-bindings/clock/r7s72100-clock.h new file +28 -0
new file mode 100644
index 000000000000..c756f1cf0d52
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R7S72100_H__
+#define __DT_BINDINGS_CLOCK_R7S72100_H__
+
+#define R7S72100_CLK_PLL	0
+
+/* MSTP3 */
+#define R7S72100_CLK_MTU2	3
+
+/* MSTP4 */
+#define R7S72100_CLK_SCIF0	7
+#define R7S72100_CLK_SCIF1	6
+#define R7S72100_CLK_SCIF2	5
+#define R7S72100_CLK_SCIF3	4
+#define R7S72100_CLK_SCIF4	3
+#define R7S72100_CLK_SCIF5	2
+#define R7S72100_CLK_SCIF6	1
+#define R7S72100_CLK_SCIF7	0
+
+#endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */
Signature · 1 line
1.9.2
#3 lore raw

PATCH v4 3/11 ARM: shmobile: r7s72100: genmai: populate nodes for external clocks

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

---
 arch/arm/boot/dts/r7s72100-genmai-reference.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/r7s72100-genmai-reference.dts +8 -0
index e664611a47c8..941e72ce7c82 100644
@@ -30,6 +30,14 @@
 	};
 };
 
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
 &i2c2 {
 	status = "okay";
 	clock-frequency = <400000>;
Signature · 1 line
1.9.2
#4 lore raw

PATCH v4 4/11 ARM: shmobile: r7s72100: add scif nodes to dtsi

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

---
 arch/arm/boot/dts/r7s72100.dtsi | 96 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)
arch/arm/boot/dts/r7s72100.dtsi +96 -0
index 5a6e2481b567..a4a67380b0a2 100644
@@ -200,6 +200,102 @@
 		status = "disabled";
 	};
 
+	scif0: serial at e8007000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8007000 64>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 191 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 192 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial at e8007800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8007800 64>;
+		interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 195 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 196 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 193 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif2: serial at e8008000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8008000 64>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 200 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 197 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif3: serial at e8008800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8008800 64>;
+		interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 203 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 204 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 201 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif4: serial at e8009000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8009000 64>;
+		interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 207 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 208 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 205 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif5: serial at e8009800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8009800 64>;
+		interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 211 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 212 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 209 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif6: serial at e800a000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe800a000 64>;
+		interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 215 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 216 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 213 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif7: serial at e800a800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe800a800 64>;
+		interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 219 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 220 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 217 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
 	spi0: spi at e800c800 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800c800 0x24>;
Signature · 1 line
1.9.2
#5 lore raw

PATCH v4 5/11 ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

We keep the UART naming backwards compatible with the legacy version.

---
 arch/arm/boot/dts/r7s72100-genmai-reference.dts | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r7s72100-genmai-reference.dts +17 -1
index 941e72ce7c82..facff0271716 100644
@@ -1,7 +1,8 @@
 /*
  * Device Tree Source for the Genmai board
  *
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <[email protected]>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -15,6 +16,17 @@
 	model = "Genmai";
 	compatible = "renesas,genmai-reference", "renesas,r7s72100";
 
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+		serial2 = &scif2;
+		serial3 = &scif3;
+		serial4 = &scif4;
+		serial5 = &scif5;
+		serial6 = &scif6;
+		serial7 = &scif7;
+	};
+
 	chosen {
 		bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
 	};
@@ -48,3 +60,7 @@
 		pagesize = <64>;
 	};
 };
+
+&scif2 {
+	status = "okay";
+};
Signature · 1 line
1.9.2
maintainer
#6 lore raw

PATCH v4 5/11 ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console

Quoted 31 lines · Wolfram Sang

From: Wolfram Sang <[email protected]>

We keep the UART naming backwards compatible with the legacy version.

---
 arch/arm/boot/dts/r7s72100-genmai-reference.dts | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)
arch/arm/boot/dts/r7s72100-genmai-reference.dts +6 -1
index 941e72ce7c82..facff0271716 100644
@@ -1,7 +1,8 @@
 /*
  * Device Tree Source for the Genmai board
  *
- * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <[email protected]>
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -15,6 +16,17 @@
        model = "Genmai";
        compatible = "renesas,genmai-reference", "renesas,r7s72100";
 
+       aliases {
+               serial0 = &scif0;
+               serial1 = &scif1;
+               serial2 = &scif2;

arch/arm/boot/dts/r7s72100-genmai-reference.dts line 32

Quoted 10 lines
arch/arm/boot/dts/r7s72100-genmai-reference.dts +7 -0
+               serial3 = &scif3;
+               serial4 = &scif4;
+               serial5 = &scif5;
+               serial6 = &scif6;
+               serial7 = &scif7;
+       };
+
        chosen {
                bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
        };

Hi Wolfram,

Thanks for your updated series. For this patch I only have a minor comment. I believe we only want to enable the serial port that is used on the board. At the same time we want to keep the same ordering as the legacy code. I believe you keep the same order already and only enable ttySC2, but I wonder if you really need all the aliases above? Perhaps it is possible to keep just serial2?

Cheers,

/ magnus

#7 lore raw

PATCH v4 5/11 ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console

Hi Magnus,

Quoted 6 lines

Thanks for your updated series. For this patch I only have a minor comment. I believe we only want to enable the serial port that is used on the board. At the same time we want to keep the same ordering as the legacy code. I believe you keep the same order already and only enable ttySC2, but I wonder if you really need all the aliases above? Perhaps it is possible to keep just serial2?

Yeah, this is easily possible. I wanted to add the additional aliases because the other SCIF pins are available on the external connectors and wanted potential users to save some hassle. Let me know if you think this is not needed and I will resend this patch only taking care of SCIF2.

Thanks,

Wolfram

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140429/22a4b582/attachment-0001.sig>

#8 lore raw

PATCH v4 5/11 ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console

Quoted 9 lines · Wolfram Sang

Hi Magnus,

Quoted 6 lines

Thanks for your updated series. For this patch I only have a minor comment. I believe we only want to enable the serial port that is used on the board. At the same time we want to keep the same ordering as the legacy code. I believe you keep the same order already and only enable ttySC2, but I wonder if you really need all the aliases above? Perhaps it is possible to keep just serial2?

Quoted 5 lines

Yeah, this is easily possible. I wanted to add the additional aliases because the other SCIF pins are available on the external connectors and wanted potential users to save some hassle. Let me know if you think this is not needed and I will resend this patch only taking care of SCIF2.

It seems that when enabling devices in DT there is a preference for only enabling devices that are actually exposed on the board.

So at the risk of being contradicted by Magnus and others my recommendation is to remove the aliases that Magnus highlighted.

#9 lore raw

PATCH v4 5/11 ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console

Quoted 2 lines

So at the risk of being contradicted by Magnus and others my recommendation is to remove the aliases that Magnus highlighted.

OK. Shall I resend the series or only this patch?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140429/040ec80e/attachment.sig>

#10 lore raw

PATCH v4 5/11 ARM: shmobile: r7s72100: genmai: add uart aliases and activate scif2 as console

Quoted 4 lines · Wolfram Sang
Quoted 2 lines

So at the risk of being contradicted by Magnus and others my recommendation is to remove the aliases that Magnus highlighted.

OK. Shall I resend the series or only this patch?

I'd prefer a repost of the entire series if it is not too much trouble.

#11 lore raw

PATCH v4 6/11 ARM: shmobile: r7s72100: genmai: platform scif devices only for legacy support

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

We have now DT support for SCIF, so use the platform_device initialization only for the legacy support.

---
 arch/arm/mach-shmobile/board-genmai.c   | 44 +++++++++++++++++++++++++++++++++
 arch/arm/mach-shmobile/setup-r7s72100.c | 43 --------------------------------
 2 files changed, 44 insertions(+), 43 deletions(-)
arch/arm/mach-shmobile/board-genmai.c +44 -0
index 6c328d63b819..c94201ee8596 100644
@@ -21,6 +21,7 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/serial_sci.h>
 #include <linux/sh_eth.h>
 #include <linux/spi/rspi.h>
 #include <linux/spi/spi.h>
@@ -89,6 +90,40 @@ static const struct spi_board_info spi_info[] __initconst = {
 	},
 };
 
+/* SCIF */
+#define R7S72100_SCIF(index, baseaddr, irq)				\
+static const struct plat_sci_port scif##index##_platform_data = {	\
+	.type		= PORT_SCIF,					\
+	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,		\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
+	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |	\
+			  SCSCR_REIE,					\
+};									\
+									\
+static struct resource scif##index##_resources[] = {			\
+	DEFINE_RES_MEM(baseaddr, 0x100),				\
+	DEFINE_RES_IRQ(irq + 1),					\
+	DEFINE_RES_IRQ(irq + 2),					\
+	DEFINE_RES_IRQ(irq + 3),					\
+	DEFINE_RES_IRQ(irq),						\
+}									\
+
+R7S72100_SCIF(0, 0xe8007000, gic_iid(221));
+R7S72100_SCIF(1, 0xe8007800, gic_iid(225));
+R7S72100_SCIF(2, 0xe8008000, gic_iid(229));
+R7S72100_SCIF(3, 0xe8008800, gic_iid(233));
+R7S72100_SCIF(4, 0xe8009000, gic_iid(237));
+R7S72100_SCIF(5, 0xe8009800, gic_iid(241));
+R7S72100_SCIF(6, 0xe800a000, gic_iid(245));
+R7S72100_SCIF(7, 0xe800a800, gic_iid(249));
+
+#define r7s72100_register_scif(index)					       \
+	platform_device_register_resndata(&platform_bus, "sh-sci", index,      \
+					  scif##index##_resources,	       \
+					  ARRAY_SIZE(scif##index##_resources), \
+					  &scif##index##_platform_data,	       \
+					  sizeof(scif##index##_platform_data))
+
 static void __init genmai_add_standard_devices(void)
 {
 	r7s72100_clock_init();
@@ -102,6 +137,15 @@ static void __init genmai_add_standard_devices(void)
 	r7s72100_register_rspi(3);
 	r7s72100_register_rspi(4);
 	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
+
+	r7s72100_register_scif(0);
+	r7s72100_register_scif(1);
+	r7s72100_register_scif(2);
+	r7s72100_register_scif(3);
+	r7s72100_register_scif(4);
+	r7s72100_register_scif(5);
+	r7s72100_register_scif(6);
+	r7s72100_register_scif(7);
 }
 
 static const char * const genmai_boards_compat_dt[] __initconst = {
arch/arm/mach-shmobile/setup-r7s72100.c +0 -43

61 lines not on this page · raw message

Signature · 1 line
1.9.2
#12 lore raw

PATCH v4 7/11 ARM: shmobile: r7s72100: add i2c clocks to dtsi

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

---
 arch/arm/boot/dts/r7s72100.dtsi            | 15 +++++++++++++++
 include/dt-bindings/clock/r7s72100-clock.h |  6 ++++++
 2 files changed, 21 insertions(+)
arch/arm/boot/dts/r7s72100.dtsi +15 -0
index a4a67380b0a2..afce2e344c7a 100644
@@ -110,6 +110,17 @@
 			>;
 			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
 		};
+
+		mstp9_clks: mstp9_clks at fcfe0438 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0438 4>;
+			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
+			clock-indices = <
+				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
+			>;
+			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
+		};
 	};
 
 	cpus {
@@ -145,6 +156,7 @@
 			     <0 162 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 163 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
@@ -162,6 +174,7 @@
 			     <0 170 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
@@ -179,6 +192,7 @@
 			     <0 178 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 179 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
@@ -196,6 +210,7 @@
 			     <0 186 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 187 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
 		clock-frequency = <100000>;
 		status = "disabled";
 	};
include/dt-bindings/clock/r7s72100-clock.h +6 -0
index c756f1cf0d52..ff84e0bafd7b 100644
@@ -25,4 +25,10 @@
 #define R7S72100_CLK_SCIF6	1
 #define R7S72100_CLK_SCIF7	0
 
+/* MSTP9 */
+#define R7S72100_CLK_I2C0	7
+#define R7S72100_CLK_I2C1	6
+#define R7S72100_CLK_I2C2	5
+#define R7S72100_CLK_I2C3	4
+
 #endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */
Signature · 1 line
1.9.2
#13 lore raw

PATCH v4 8/11 ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

Not used anymore since we switched to CCF.

---
 arch/arm/mach-shmobile/clock-r7s72100.c | 4 ----
 1 file changed, 4 deletions(-)
arch/arm/mach-shmobile/clock-r7s72100.c +0 -4
index bee0073c9b64..6974cadac51c 100644
@@ -199,10 +199,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("e800d800.spi", &mstp_clks[MSTP105]),
 	CLKDEV_DEV_ID("e800e000.spi", &mstp_clks[MSTP104]),
 	CLKDEV_DEV_ID("e800e800.spi", &mstp_clks[MSTP103]),
-	CLKDEV_DEV_ID("fcfee000.i2c", &mstp_clks[MSTP97]),
-	CLKDEV_DEV_ID("fcfee400.i2c", &mstp_clks[MSTP96]),
-	CLKDEV_DEV_ID("fcfee800.i2c", &mstp_clks[MSTP95]),
-	CLKDEV_DEV_ID("fcfeec00.i2c", &mstp_clks[MSTP94]),
 	CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
 	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
 
Signature · 1 line
1.9.2
#14 lore raw

PATCH v4 9/11 ARM: shmobile: r7s72100: add spi clocks to dtsi

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

---
 arch/arm/boot/dts/r7s72100.dtsi            | 18 ++++++++++++++++++
 include/dt-bindings/clock/r7s72100-clock.h |  7 +++++++
 2 files changed, 25 insertions(+)
arch/arm/boot/dts/r7s72100.dtsi +18 -0
index afce2e344c7a..f50fbc8f3bd9 100644
@@ -121,6 +121,19 @@
 			>;
 			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
 		};
+
+		mstp10_clks: mstp10_clks at fcfe043c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe043c 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
+				R7S72100_CLK_SPI4
+			>;
+			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
+		};
 	};
 
 	cpus {
@@ -318,6 +331,7 @@
 			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -331,6 +345,7 @@
 			     <0 242 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -344,6 +359,7 @@
 			     <0 245 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -357,6 +373,7 @@
 			     <0 248 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -370,6 +387,7 @@
 			     <0 251 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
include/dt-bindings/clock/r7s72100-clock.h +7 -0
index ff84e0bafd7b..5128f4d94f44 100644
@@ -31,4 +31,11 @@
 #define R7S72100_CLK_I2C2	5
 #define R7S72100_CLK_I2C3	4
 
+/* MSTP10 */
+#define R7S72100_CLK_SPI0	7
+#define R7S72100_CLK_SPI1	6
+#define R7S72100_CLK_SPI2	5
+#define R7S72100_CLK_SPI3	4
+#define R7S72100_CLK_SPI4	3
+
 #endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */
Signature · 1 line
1.9.2
#15 lore raw

PATCH v4 10/11 ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

Not used anymore since we switched to CCF.

---
 arch/arm/mach-shmobile/clock-r7s72100.c | 5 -----
 1 file changed, 5 deletions(-)
arch/arm/mach-shmobile/clock-r7s72100.c +0 -5
index 6974cadac51c..7ea712a051f0 100644
@@ -194,11 +194,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]),
 	CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]),
 	CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]),
-	CLKDEV_DEV_ID("e800c800.spi", &mstp_clks[MSTP107]),
-	CLKDEV_DEV_ID("e800d000.spi", &mstp_clks[MSTP106]),
-	CLKDEV_DEV_ID("e800d800.spi", &mstp_clks[MSTP105]),
-	CLKDEV_DEV_ID("e800e000.spi", &mstp_clks[MSTP104]),
-	CLKDEV_DEV_ID("e800e800.spi", &mstp_clks[MSTP103]),
 	CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
 	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
 
Signature · 1 line
1.9.2
#16 lore raw

PATCH v4 11/11 ARM: shmobile: r7s72100: use workaround for non DT-clocks

In reply to Wolfram Sang

From: Wolfram Sang <[email protected]>

MTU2 is not yet prepared for DT usage, so use the common workaround via clkdev for now.

---
 arch/arm/mach-shmobile/board-genmai-reference.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
arch/arm/mach-shmobile/board-genmai-reference.c +12 -2
index 7630c1053e32..fde558b66d4e 100644
@@ -18,18 +18,28 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/clk-provider.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <mach/clock.h>
 #include <mach/common.h>
 #include <mach/r7s72100.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+#ifdef CONFIG_COMMON_CLK
+/*
+ * This is a really crude hack to provide clkdev support to platform
+ * devices until they get moved to DT.
+ */
+static const struct clk_name clk_names[] = {
+	{ "mtu2", NULL, "sh_mtu2.0" },
+};
+#endif
+
 static void __init genmai_add_standard_devices(void)
 {
 #ifdef CONFIG_COMMON_CLK
-	of_clk_init(NULL);
+	shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), true);
 #else
 	r7s72100_clock_init();
 #endif
Signature · 1 line
1.9.2