pinctrl: sunxi: fix pin numbers passed to register offset helpers
Subsystems (2)
PATCH 1/1 pinctrl: sunxi: fix pin numbers passed to register offset helpers
The pin numbers passed to sunxi_*_reg helpers to get the correct registers should be the pin offset for the PIO block, not the absolute number we use that is based on the alphanumeric labels Allwinner uses.
This patch subtracts .pin_base from the pin number passed to these functions, so the driver accesses the correct registers.
---
Hi,
This patch fixes the pinctrl driver failing to set pinmuxes for the R_PIO block found on the A31 and A23. The problem was found while working on bringing up the A23 SoC. The R_UART pins weren't properly muxed when the bootloader didn't use them.
A thank you to Boris who also verified the issue.
Cheers,
ChenYu
--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-)
drivers/pinctrl/sunxi/pinctrl-sunxi.c +14 -12
@@ -280,6 +280,7 @@ static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,struct sunxi_pinctrl *pctl =pinctrl_dev_get_drvdata (pctldev);struct sunxi_pinctrl_group *g = &pctl->groups[group];unsigned long flags; +unsigned pin = g->pin - pctl->desc->pin_base;u32 val, mask;u16 strength;u8 dlevel;
@@ -303,23 +304,23 @@ static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,* 3: 40mA */ dlevel = strength /10 -1 ; - val =readl (pctl->membase +sunxi_dlevel_reg (g->pin)); - mask =DLEVEL_PINS_MASK <<sunxi_dlevel_offset (g->pin); + val =readl (pctl->membase +sunxi_dlevel_reg (pin)); + mask =DLEVEL_PINS_MASK <<sunxi_dlevel_offset (pin);writel ((val & ~mask) - | dlevel <<sunxi_dlevel_offset (g->pin), - pctl->membase +sunxi_dlevel_reg (g->pin)); + | dlevel <<sunxi_dlevel_offset (pin), + pctl->membase +sunxi_dlevel_reg (pin));break ;case PIN_CONFIG_BIAS_PULL_UP : - val =readl (pctl->membase +sunxi_pull_reg (g->pin)); - mask =PULL_PINS_MASK <<sunxi_pull_offset (g->pin); -writel ((val & ~mask) |1 <<sunxi_pull_offset (g->pin), - pctl->membase +sunxi_pull_reg (g->pin)); + val =readl (pctl->membase +sunxi_pull_reg (pin)); + mask =PULL_PINS_MASK <<sunxi_pull_offset (pin); +writel ((val & ~mask) |1 <<sunxi_pull_offset (pin), + pctl->membase +sunxi_pull_reg (pin));break ;case PIN_CONFIG_BIAS_PULL_DOWN : - val =readl (pctl->membase +sunxi_pull_reg (g->pin)); - mask =PULL_PINS_MASK <<sunxi_pull_offset (g->pin); -writel ((val & ~mask) |2 <<sunxi_pull_offset (g->pin), - pctl->membase +sunxi_pull_reg (g->pin)); + val =readl (pctl->membase +sunxi_pull_reg (pin)); + mask =PULL_PINS_MASK <<sunxi_pull_offset (pin); +writel ((val & ~mask) |2 <<sunxi_pull_offset (pin), + pctl->membase +sunxi_pull_reg (pin));break ;default :break ;
@@ -376,6 +377,7 @@ static void sunxi_pmx_set(struct pinctrl_dev *pctldev,spin_lock_irqsave (&pctl->lock, flags); + pin -= pctl->desc->pin_base; val =readl (pctl->membase +sunxi_mux_reg (pin)); mask =MUX_PINS_MASK <<sunxi_mux_offset (pin); writel((val & ~mask) | config << sunxi_mux_offset(pin),
Signature · 1 line
2.0.0.rc2
PATCH 1/1 pinctrl: sunxi: fix pin numbers passed to register offset helpers
Hello Chen-Yu,
Quoted 7 lines · Chen-Yu Tsai
The pin numbers passed to sunxi_*_reg helpers to get the correct registers should be the pin offset for the PIO block, not the absolute number we use that is based on the alphanumeric labels Allwinner uses.
This patch subtracts .pin_base from the pin number passed to these functions, so the driver accesses the correct registers.
Thanks for fixing this bug.
Quoted 2 lines
Signed-off-by Chen-Yu Tsai <[email protected]>
Quoted 75 lines
---
Hi,
This patch fixes the pinctrl driver failing to set pinmuxes for the
R_PIOblock found on the A31 and A23. The problem was found while working on bringing up the A23 SoC. TheR_UARTpins weren't properly muxed when the bootloader didn't use them.A thank you to Boris who also verified the issue.
Cheers,
ChenYu--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-)drivers/pinctrl/sunxi/pinctrl-sunxi.c +14
-12@@ -280,6 +280,7 @@ static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,struct sunxi_pinctrl *pctl =pinctrl_dev_get_drvdata (pctldev);struct sunxi_pinctrl_group *g = &pctl->groups[group];unsigned long flags; +unsigned pin = g->pin - pctl->desc->pin_base;u32 val, mask;u16 strength;u8 dlevel;@@ -303,23 +304,23 @@ static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev,* 3: 40mA */ dlevel = strength /10 -1 ; - val =readl (pctl->membase +sunxi_dlevel_reg (g->pin)); - mask =DLEVEL_PINS_MASK <<sunxi_dlevel_offset (g->pin); + val =readl (pctl->membase +sunxi_dlevel_reg (pin)); + mask =DLEVEL_PINS_MASK <<sunxi_dlevel_offset (pin);writel ((val & ~mask) - | dlevel <<sunxi_dlevel_offset (g->pin), - pctl->membase +sunxi_dlevel_reg (g->pin)); + | dlevel <<sunxi_dlevel_offset (pin), + pctl->membase +sunxi_dlevel_reg (pin));break ;case PIN_CONFIG_BIAS_PULL_UP : - val =readl (pctl->membase +sunxi_pull_reg (g->pin)); - mask =PULL_PINS_MASK <<sunxi_pull_offset (g->pin); -writel ((val & ~mask) |1 <<sunxi_pull_offset (g->pin), - pctl->membase +sunxi_pull_reg (g->pin)); + val =readl (pctl->membase +sunxi_pull_reg (pin)); + mask =PULL_PINS_MASK <<sunxi_pull_offset (pin); +writel ((val & ~mask) |1 <<sunxi_pull_offset (pin), + pctl->membase +sunxi_pull_reg (pin));break ;case PIN_CONFIG_BIAS_PULL_DOWN : - val =readl (pctl->membase +sunxi_pull_reg (g->pin)); - mask =PULL_PINS_MASK <<sunxi_pull_offset (g->pin); -writel ((val & ~mask) |2 <<sunxi_pull_offset (g->pin), - pctl->membase +sunxi_pull_reg (g->pin)); + val =readl (pctl->membase +sunxi_pull_reg (pin)); + mask =PULL_PINS_MASK <<sunxi_pull_offset (pin); +writel ((val & ~mask) |2 <<sunxi_pull_offset (pin), + pctl->membase +sunxi_pull_reg (pin));break ;default :break ;@@ -376,6 +377,7 @@ static void sunxi_pmx_set(struct pinctrl_dev *pctldev,spin_lock_irqsave (&pctl->lock, flags); + pin -= pctl->desc->pin_base; val =readl (pctl->membase +sunxi_mux_reg (pin)); mask =MUX_PINS_MASK <<sunxi_mux_offset (pin); writel((val & ~mask) | config << sunxi_mux_offset(pin),
Signature · 3 lines
Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
PATCH 1/1 pinctrl: sunxi: fix pin numbers passed to register offset helpers
In reply to Chen-Yu TsaiQuoted 9 lines · Chen-Yu Tsai
The pin numbers passed to sunxi_*_reg helpers to get the correct registers should be the pin offset for the PIO block, not the absolute number we use that is based on the alphanumeric labels Allwinner uses.
This patch subtracts .pin_base from the pin number passed to these functions, so the driver accesses the correct registers.
Signed-off-by Chen-Yu Tsai <[email protected]>
Maxime, can I have your ACK on this patch, too?
Yours,
Linus Walleij
PATCH 1/1 pinctrl: sunxi: fix pin numbers passed to register offset helpers
Quoted 7 lines · Linus Walleij
Quoted 5 lines · Chen-Yu Tsai
The pin numbers passed to sunxi_*_reg helpers to get the correct registers should be the pin offset for the PIO block, not the absolute number we use that is based on the alphanumeric labels Allwinner uses.
Quoted 6 lines
Quoted 4 lines
This patch subtracts .pin_base from the pin number passed to these functions, so the driver accesses the correct registers.
Signed-off-by Chen-Yu Tsai <[email protected]>Maxime, can I have your ACK on this patch, too?
You have it!
Thanks,
Maxime
Signature · 10 lines
Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140523/63b4a976/attachment.sig>
PATCH 1/1 pinctrl: sunxi: fix pin numbers passed to register offset helpers
In reply to Chen-Yu TsaiQuoted 9 lines · Chen-Yu Tsai
The pin numbers passed to sunxi_*_reg helpers to get the correct registers should be the pin offset for the PIO block, not the absolute number we use that is based on the alphanumeric labels Allwinner uses.
This patch subtracts .pin_base from the pin number passed to these functions, so the driver accesses the correct registers.
Signed-off-by Chen-Yu Tsai <[email protected]>
Patch applied with Boris' and Maximes Reviewd/ACK tags.
Yours,
Linus Walleij