Skip to contentSkip to conversation

i915 / 3.15 intermittently boots into blank screeen

DISCUSSION Jan Niggemann 2 participants 11 messages Jul 17, 2014 – Jul 30, 2014

lore
Share & tools
lore
#0 lore raw

Hi list,

you were very helpful to nail down the interrupt storm issue a year ago, I hope we can track this down, too.
I'm experiencing an issue with 3.15.5 on my Lenovo T400:
When my machine boots, I can see some of the boot messages flying by (quite fast because the machine has a SSD).
On a usual boot, the screen would go blank with the backlight off, come back on and other boot messages are visible in a different resolution. Finally the screen flickers once and shows the GDM login.
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but the first mode change doesn't occur, resulting in a black screen with backlight on. The system is entirely unresponsive and I can only press the power button until to switch it off.

This happens with my custom built kernel 3.15.5 but not with the Debian standard kernel 3.2.0 and IIRC neither with my custom built 3.14 kernels.

Would a drm debug log help and if so, what kernel parameters should I use to generate it?

System environment
Lenovo T400, GM45 Express Chipset, custom-built kernel 3.15.5 on Debian 7.5 /32bit, built-in LCD, issue happens 3 boots out of 4.

Best regards

Jan

#1 lore raw
Quoted 15 lines · Jan Niggemann

Hi list,

you were very helpful to nail down the interrupt storm issue a year ago, I hope we can track this down, too.
I'm experiencing an issue with 3.15.5 on my Lenovo T400:
When my machine boots, I can see some of the boot messages flying by (quite fast because the machine has a SSD).
On a usual boot, the screen would go blank with the backlight off, come back on and other boot messages are visible in a different resolution. Finally the screen flickers once and shows the GDM login.
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but the first mode change doesn't occur, resulting in a black screen with backlight on. The system is entirely unresponsive and I can only press the power button until to switch it off.

Quoted 5 lines

This happens with my custom built kernel 3.15.5 but not with the Debian standard kernel 3.2.0 and IIRC neither with my custom built 3.14 kernels.

Would a drm debug log help and if so, what kernel parameters should I use to generate it?

Your box seems to die in the initial modeset, which is done with the console_lock held. Which means any crashdumps in dmesg won't get out to netconsole or anything else unfortunately.

I think the only way to move forward here is to double-check that 3.14 works and 3.15 is broken by recompiling with the same .config (occasionally config changes cause regressions). And then do a full git bisect to find the offending commit.
-Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#2 lore raw

Hi Daniel,

Am 18.07.2014 15:27, schrieb Daniel Vetter:

Quoted 10 lines · Jan Niggemann
Quoted 5 lines

I'm experiencing an issue with 3.15.5 on my Lenovo T400:
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but the first mode change doesn't occur, resulting in a black screen with backlight on. The system is entirely unresponsive and I can only press the power button until to switch it off.

I think the only way to move forward here is to double-check that 3.14 works and 3.15 is broken by recompiling with the same .config (occasionally config changes cause regressions). And then do a full git bisect to find the offending commit.

thank you for the feedback.
I still have all my custom built kernels, I will test 3.14.0 through 3.14.8 to make sure those were OK and report back.

Best regards
jan

#3 lore raw
Quoted 15 lines · Jan Niggemann

Am 18.07.2014 15:27, schrieb Daniel Vetter:

Quoted 13 lines · Jan Niggemann
Quoted 8 lines

I'm experiencing an issue with 3.15.5 on my Lenovo T400:
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but the
first mode change doesn't occur, resulting in a black screen with backlight
on. The system is entirely unresponsive and I can only press the power button until to switch it off.

I think the only way to move forward here is to double-check that 3.14

Quoted 7 lines
Quoted 3 lines

works and 3.15 is broken by recompiling with the same .config (occasionally config changes cause regressions). And then do a full git bisect to find the offending commit.

thank you for the feedback.
I still have all my custom built kernels, I will test 3.14.0 through 3.14.8 to make sure those were OK and report back.

You only need to test 3.14.0, since the backported fixes only contain a very small subset of all patches for 3.15. So it's more efficient to then switch to git bisect between 3.14 and 3.15 directly (after you've confirmed that 3.15.0 is indeed busted).
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

#4 lore raw

Forgot to Cc the list, sorry.

Am 18.07.2014 18:25, schrieb Daniel Vetter:

Quoted 20 lines · Jan Niggemann
Quoted 19 lines

Am 18.07.2014 15:27, schrieb Daniel Vetter:

Quoted 16 lines · Jan Niggemann
Quoted 8 lines

I'm experiencing an issue with 3.15.5 on my Lenovo T400:
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but the
first mode change doesn't occur, resulting in a black screen with backlight
on. The system is entirely unresponsive and I can only press the power button until to switch it off.

I think the only way to move forward here is to double-check that 3.14

works and 3.15 is broken by recompiling with the same .config (occasionally config changes cause regressions). And then do a full git bisect to find the offending commit.

Quoted 8 lines
Quoted 3 lines

thank you for the feedback.
I still have all my custom built kernels, I will test 3.14.0 through 3.14.8 to make sure those were OK and report back.

You only need to test 3.14.0, since the backported fixes only contain a very small subset of all patches for 3.15. So it's more efficient to then switch to git bisect between 3.14 and 3.15 directly (after you've confirmed that 3.15.0 is indeed busted).

I now booted my custom 3.14.1 some 30 times, the issue didn't show once. It seems that it is indeed the 3.15 line that's borked. I uploaded my custom 3.14.1 and 3.15.1 config files here: http://files.hz6.de/kernel-configs-jn.tgz

May this be related to this mail http://www.mail-archive.com/[email protected]/msg42432.html
"fix freeze with blank screen booting highmem" by Hugh Dickins?

Kind regards
jan

author Reviewed-by Chris Wilson
#6 lore raw
In reply to Daniel Vetter

Am 18.07.2014 18:25, schrieb Daniel Vetter:

Quoted 20 lines · Jan Niggemann
Quoted 19 lines

Am 18.07.2014 15:27, schrieb Daniel Vetter:

Quoted 16 lines · Jan Niggemann
Quoted 8 lines

I'm experiencing an issue with 3.15.5 on my Lenovo T400:
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but the
first mode change doesn't occur, resulting in a black screen with backlight
on. The system is entirely unresponsive and I can only press the power button until to switch it off.

I think the only way to move forward here is to double-check that 3.14

works and 3.15 is broken by recompiling with the same .config (occasionally config changes cause regressions). And then do a full git bisect to find the offending commit.

Quoted 8 lines
Quoted 3 lines

thank you for the feedback.
I still have all my custom built kernels, I will test 3.14.0 through 3.14.8 to make sure those were OK and report back.

You only need to test 3.14.0, since the backported fixes only contain a very small subset of all patches for 3.15. So it's more efficient to then switch to git bisect between 3.14 and 3.15 directly (after you've confirmed that 3.15.0 is indeed busted).

I familiarized with git bisect, that was something I had never used before.

I started it with "git bisect start v3.15 v3.14 -- drivers/gpu/drm/i915"

This lead me to this:

cfa7c862982b431add7f2b362526bf31372fc7b0 is the first bad commit commit cfa7c862982b431add7f2b362526bf31372fc7b0

Author: Daniel Vetter <[email protected]>
Date:   Tue Apr 29 11:53:58 2014 +0200

drm/i915: Sanitize the enable_ppgtt module option once

Otherwise we'll end up spamming dmesg on every context creation on
snb
with vt-d enabled. This regression was introduced in

commit 246cbfb5fb9a1ca0997fbb135464c1ff5bb9c549
Author: Ben Widawsky <[email protected]>
Date: Fri Dec 6 14:11:14 2013 -0800

drm/i915: Reorganize intel_enable_ppgtt

As the i915.enable_ppgtt is read-only it cannot be changed after
the
module is loaded and so we can perform an early sanitization of the values.

v2:
- Add comment and pimp commit message (Chris)
- Use the param consistently (Jani)

v3:
- Fix init sequence on pre-gen6 by moving the sanitize_ppgtt call
to
gtt_init. Fixes boot hangs on pre-gen6.
- Add a debug output for the sanitize ppgtt mode.

References: https://lkml.org/lkml/2014/4/17/599
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77916

:040000 040000 5488e397a1aaa28dca4a252452e9463b0a8f8d10 214c8e98b3c72844e48ab7aef02cba7daf139fab M drivers

I realized that the issue does always show, contrary to the subject initially chosen.

Unfortunately I can't say anything else, but maybe this will help you experts spot the issue. If I can help more, be it with testing or anything else, just let me know.

Regards
jan

#7 lore raw
Quoted 85 lines · Jan Niggemann

Am 18.07.2014 18:25, schrieb Daniel Vetter:

Quoted 32 lines · Jan Niggemann
Quoted 24 lines

Am 18.07.2014 15:27, schrieb Daniel Vetter:

Quoted 14 lines · Jan Niggemann
Quoted 9 lines

I'm experiencing an issue with 3.15.5 on my Lenovo T400:
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but the
first mode change doesn't occur, resulting in a black screen with backlight
on. The system is entirely unresponsive and I can only press the power button until to switch it off.

Quoted 5 lines

I think the only way to move forward here is to double-check that 3.14

works and 3.15 is broken by recompiling with the same .config (occasionally config changes cause regressions). And then do a full git bisect to find the offending commit.

Quoted 4 lines

thank you for the feedback.
I still have all my custom built kernels, I will test 3.14.0 through 3.14.8
to make sure those were OK and report back.

Quoted 4 lines

You only need to test 3.14.0, since the backported fixes only contain a very small subset of all patches for 3.15. So it's more efficient to then switch to git bisect between 3.14 and 3.15 directly (after you've confirmed that 3.15.0 is indeed busted).

I familiarized with git bisect, that was something I had never used before.

I started it with "git bisect start v3.15 v3.14 -- drivers/gpu/drm/i915"

This lead me to this:

cfa7c862982b431add7f2b362526bf31372fc7b0 is the first bad commit commit cfa7c862982b431add7f2b362526bf31372fc7b0

Author: Daniel Vetter <[email protected]>
Date:   Tue Apr 29 11:53:58 2014 +0200

drm/i915: Sanitize the enable_ppgtt module option once

Otherwise we'll end up spamming dmesg on every context creation on snb with vt-d enabled. This regression was introduced in

commit 246cbfb5fb9a1ca0997fbb135464c1ff5bb9c549
Author: Ben Widawsky <[email protected]>
Date: Fri Dec 6 14:11:14 2013 -0800

drm/i915: Reorganize intel_enable_ppgtt

As the i915.enable_ppgtt is read-only it cannot be changed after the module is loaded and so we can perform an early sanitization of the values.

v2:
- Add comment and pimp commit message (Chris)
- Use the param consistently (Jani)

v3:
- Fix init sequence on pre-gen6 by moving the sanitize_ppgtt call to gtt_init. Fixes boot hangs on pre-gen6.
- Add a debug output for the sanitize ppgtt mode.

References: https://lkml.org/lkml/2014/4/17/599
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77916

:040000 040000 5488e397a1aaa28dca4a252452e9463b0a8f8d10
214c8e98b3c72844e48ab7aef02cba7daf139fab M drivers

Quoted 6 lines

I realized that the issue does always show, contrary to the subject initially chosen.

Unfortunately I can't say anything else, but maybe this will help you experts spot the issue.
If I can help more, be it with testing or anything else, just let me know.

Hm, I'm not aware of this breaking any gm45 machines, mine here is still happy. Can you please make sure that you don't have any i915 module options set anywhere, either on the kernel cmdline, modeprobe config files in /etc or anywhere else?
-Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#8 lore raw

Am 29.07.2014 23:35, schrieb Daniel Vetter:

Quoted 93 lines · Jan Niggemann
Quoted 92 lines

Am 18.07.2014 18:25, schrieb Daniel Vetter:

Quoted 32 lines · Jan Niggemann
Quoted 24 lines

Am 18.07.2014 15:27, schrieb Daniel Vetter:

Quoted 14 lines · Jan Niggemann
Quoted 9 lines

I'm experiencing an issue with 3.15.5 on my Lenovo T400:
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but the
first mode change doesn't occur, resulting in a black screen with backlight
on. The system is entirely unresponsive and I can only press the power button until to switch it off.

Quoted 5 lines

I think the only way to move forward here is to double-check that 3.14

works and 3.15 is broken by recompiling with the same .config (occasionally config changes cause regressions). And then do a full git bisect to find the offending commit.

Quoted 4 lines

thank you for the feedback.
I still have all my custom built kernels, I will test 3.14.0 through 3.14.8
to make sure those were OK and report back.

Quoted 4 lines

You only need to test 3.14.0, since the backported fixes only contain a very small subset of all patches for 3.15. So it's more efficient to then switch to git bisect between 3.14 and 3.15 directly (after you've confirmed that 3.15.0 is indeed busted).

I familiarized with git bisect, that was something I had never used before.

I started it with "git bisect start v3.15 v3.14 -- drivers/gpu/drm/i915"

This lead me to this:

cfa7c862982b431add7f2b362526bf31372fc7b0 is the first bad commit commit cfa7c862982b431add7f2b362526bf31372fc7b0

Author: Daniel Vetter <[email protected]>
Date:   Tue Apr 29 11:53:58 2014 +0200

drm/i915: Sanitize the enable_ppgtt module option once

Otherwise we'll end up spamming dmesg on every context creation
on snb
with vt-d enabled. This regression was introduced in

commit 246cbfb5fb9a1ca0997fbb135464c1ff5bb9c549
Author: Ben Widawsky <[email protected]>
Date: Fri Dec 6 14:11:14 2013 -0800

drm/i915: Reorganize intel_enable_ppgtt

As the i915.enable_ppgtt is read-only it cannot be changed after
the
module is loaded and so we can perform an early sanitization of
the
values.

v2:
- Add comment and pimp commit message (Chris)
- Use the param consistently (Jani)

v3:
- Fix init sequence on pre-gen6 by moving the sanitize_ppgtt
call to
gtt_init. Fixes boot hangs on pre-gen6.
- Add a debug output for the sanitize ppgtt mode.

References: https://lkml.org/lkml/2014/4/17/599
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77916

:040000 040000 5488e397a1aaa28dca4a252452e9463b0a8f8d10
214c8e98b3c72844e48ab7aef02cba7daf139fab M drivers

I realized that the issue does always show, contrary to the subject initially chosen.

Quoted 8 lines
Quoted 3 lines

Unfortunately I can't say anything else, but maybe this will help you experts spot the issue.
If I can help more, be it with testing or anything else, just let me know.

Hm, I'm not aware of this breaking any gm45 machines, mine here is still happy. Can you please make sure that you don't have any i915 module options set anywhere, either on the kernel cmdline, modeprobe config files in /etc or anywhere else?

My kernel cmdline doesn't have anything, but /etc/modprobe.d/i915-kms.conf exists. Its content is this single line: options i915 modeset=1 Can't remember if I created that (it's from 2010) or if it's Debian default...
grep -Ri i915 /etc/ doesn't show anything else.

grep 915 config-3.15
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y CONFIG_DRM_I915_FBDEV=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set # CONFIG_DRM_I915_UMS is not set CONFIG_SND_HDA_I915=y

Would it help if I included the driver instead of building a module?

--jan

#9 lore raw
Quoted 120 lines · Jan Niggemann

Am 29.07.2014 23:35, schrieb Daniel Vetter:

Quoted 101 lines · Jan Niggemann
Quoted 92 lines

Am 18.07.2014 18:25, schrieb Daniel Vetter:

Quoted 37 lines · Jan Niggemann
Quoted 29 lines

Am 18.07.2014 15:27, schrieb Daniel Vetter:

Quoted 17 lines · Jan Niggemann
Quoted 12 lines

I'm experiencing an issue with 3.15.5 on my Lenovo T400:
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but
the
first mode change doesn't occur, resulting in a black screen with
backlight
on. The system is entirely unresponsive and I can only press the power
button until to switch it off.

Quoted 7 lines

I think the only way to move forward here is to double-check that 3.14

works and 3.15 is broken by recompiling with the same .config (occasionally config changes cause regressions). And then do a full git
bisect to find the offending commit.

Quoted 4 lines

thank you for the feedback.
I still have all my custom built kernels, I will test 3.14.0 through 3.14.8
to make sure those were OK and report back.

Quoted 4 lines

You only need to test 3.14.0, since the backported fixes only contain a very small subset of all patches for 3.15. So it's more efficient to then switch to git bisect between 3.14 and 3.15 directly (after you've confirmed that 3.15.0 is indeed busted).

I familiarized with git bisect, that was something I had never used before.

I started it with "git bisect start v3.15 v3.14 -- drivers/gpu/drm/i915"

This lead me to this:

cfa7c862982b431add7f2b362526bf31372fc7b0 is the first bad commit commit cfa7c862982b431add7f2b362526bf31372fc7b0

Author: Daniel Vetter <[email protected]>
Date:   Tue Apr 29 11:53:58 2014 +0200

drm/i915: Sanitize the enable_ppgtt module option once

Otherwise we'll end up spamming dmesg on every context creation on
snb
with vt-d enabled. This regression was introduced in

commit 246cbfb5fb9a1ca0997fbb135464c1ff5bb9c549
Author: Ben Widawsky <[email protected]>
Date: Fri Dec 6 14:11:14 2013 -0800

drm/i915: Reorganize intel_enable_ppgtt

As the i915.enable_ppgtt is read-only it cannot be changed after the module is loaded and so we can perform an early sanitization of the values.

v2:
- Add comment and pimp commit message (Chris)
- Use the param consistently (Jani)

v3:
- Fix init sequence on pre-gen6 by moving the sanitize_ppgtt call to gtt_init. Fixes boot hangs on pre-gen6.
- Add a debug output for the sanitize ppgtt mode.

References: https://lkml.org/lkml/2014/4/17/599
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77916

:040000 040000 5488e397a1aaa28dca4a252452e9463b0a8f8d10
214c8e98b3c72844e48ab7aef02cba7daf139fab M drivers

Quoted 7 lines

I realized that the issue does always show, contrary to the subject initially chosen.

Unfortunately I can't say anything else, but maybe this will help you experts spot the issue.
If I can help more, be it with testing or anything else, just let me know.

Quoted 4 lines

Hm, I'm not aware of this breaking any gm45 machines, mine here is still happy. Can you please make sure that you don't have any i915 module options set anywhere, either on the kernel cmdline, modeprobe config files in /etc or anywhere else?

My kernel cmdline doesn't have anything, but /etc/modprobe.d/i915-kms.conf exists. Its content is this single line: options i915 modeset=1 Can't remember if I created that (it's from 2010) or if it's Debian default...
grep -Ri i915 /etc/ doesn't show anything else.

grep 915 config-3.15
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y CONFIG_DRM_I915_FBDEV=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set # CONFIG_DRM_I915_UMS is not set CONFIG_SND_HDA_I915=y

Quoted 1 line

Would it help if I included the driver instead of building a module?

Shouldn't change anything really, and config all looks sane. Can you please retest with latest upstream (3.16 or even drm-intel-nightly)?

Thanks, Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#10 lore raw

Am 30.07.2014 11:33, schrieb Daniel Vetter:

Quoted 137 lines · Jan Niggemann
Quoted 136 lines

Am 29.07.2014 23:35, schrieb Daniel Vetter:

Quoted 12 lines · Jan Niggemann
Quoted 11 lines

Am 18.07.2014 18:25, schrieb Daniel Vetter:

Quoted 10 lines · Jan Niggemann
Quoted 8 lines

Am 18.07.2014 15:27, schrieb Daniel Vetter:

Quoted 5 lines · Jan Niggemann
Quoted 2 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

I'm experiencing an issue with 3.15.5 on my Lenovo T400:
Since 3.15 (or 3.14, can't say for sure), the boot starts normally, but
the
first mode change doesn't occur, resulting in a black screen with
backlight
on. The system is entirely unresponsive and I can only press

the

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines

power
button until to switch it off.

I think the only way to move forward here is to double-check

that

Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 6 lines

3.14

works and 3.15 is broken by recompiling with the same .config (occasionally config changes cause regressions). And then do a full git
bisect to find the offending commit.

thank you for the feedback.
I still have all my custom built kernels, I will test 3.14.0

through

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines

3.14.8
to make sure those were OK and report back.

You only need to test 3.14.0, since the backported fixes only

contain

Quoted 1 line
Quoted 1 line
Quoted 1 line

a very small subset of all patches for 3.15. So it's more

efficient to

Quoted 1 line
Quoted 1 line
Quoted 1 line

then switch to git bisect between 3.14 and 3.15 directly (after

you've

Quoted 3 lines
Quoted 3 lines
Quoted 1 line

confirmed that 3.15.0 is indeed busted).

I familiarized with git bisect, that was something I had never

used

Quoted 3 lines
Quoted 3 lines

before.

I started it with "git bisect start v3.15 v3.14 --

drivers/gpu/drm/i915"

Quoted 11 lines
Quoted 11 lines

This lead me to this:

cfa7c862982b431add7f2b362526bf31372fc7b0 is the first bad commit commit cfa7c862982b431add7f2b362526bf31372fc7b0

Author: Daniel Vetter <[email protected]>
Date:   Tue Apr 29 11:53:58 2014 +0200

drm/i915: Sanitize the enable_ppgtt module option once

Otherwise we'll end up spamming dmesg on every context

creation on

Quoted 10 lines
Quoted 10 lines

snb
with vt-d enabled. This regression was introduced in

commit 246cbfb5fb9a1ca0997fbb135464c1ff5bb9c549
Author: Ben Widawsky <[email protected]>
Date: Fri Dec 6 14:11:14 2013 -0800

drm/i915: Reorganize intel_enable_ppgtt

As the i915.enable_ppgtt is read-only it cannot be changed

after the

Quoted 1 line
Quoted 1 line

module is loaded and so we can perform an early sanitization

of the

Quoted 8 lines
Quoted 8 lines

values.

v2:
- Add comment and pimp commit message (Chris)
- Use the param consistently (Jani)

v3:
- Fix init sequence on pre-gen6 by moving the sanitize_ppgtt

call to

Quoted 12 lines
Quoted 12 lines

gtt_init. Fixes boot hangs on pre-gen6.
- Add a debug output for the sanitize ppgtt mode.

References: https://lkml.org/lkml/2014/4/17/599
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77916

Quoted 4 lines
Quoted 4 lines

:040000 040000 5488e397a1aaa28dca4a252452e9463b0a8f8d10
214c8e98b3c72844e48ab7aef02cba7daf139fab M drivers

I realized that the issue does always show, contrary to the

subject

Quoted 3 lines
Quoted 3 lines

initially chosen.

Unfortunately I can't say anything else, but maybe this will help

you

Quoted 2 lines
Quoted 2 lines

experts spot the issue.
If I can help more, be it with testing or anything else, just let

me

Quoted 5 lines
Quoted 1 line

know.

Hm, I'm not aware of this breaking any gm45 machines, mine here is still happy. Can you please make sure that you don't have any i915 module options set anywhere, either on the kernel cmdline,

modeprobe

Quoted 1 line

config files in /etc or anywhere else?

My kernel cmdline doesn't have anything, but /etc/modprobe.d/i915-kms.conf exists. Its content is this single line: options i915 modeset=1 Can't remember if I created that (it's from 2010) or if it's Debian default...
grep -Ri i915 /etc/ doesn't show anything else.

grep 915 config-3.15
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y CONFIG_DRM_I915_FBDEV=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set # CONFIG_DRM_I915_UMS is not set CONFIG_SND_HDA_I915=y

Quoted 2 lines
Quoted 1 line

Would it help if I included the driver instead of building a module?

Shouldn't change anything really, and config all looks sane.

Didn't change anything indeed.

Quoted 2 lines

Can you
please retest with latest upstream (3.16 or even drm-intel-nightly)?

Retested with drm-intel-nightly, this comes to a halt just before the first modeswitch.
At least the screen didn't become blank - it displays:
ACPI Warning: SystemIO range 0x00001028-0x0000102f conflicts with OpRegion 0x00001000-0x0000107f (\SB_.PCI0.LPC_.PMIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver.

ACPI Warning: SystemIO range 0x000011b0-0x000011bf conflicts with OpRegion 0x00001180-0x000011ff (\SB_.PCI0.LPC_.PMIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver.

ACPI Warning: SystemIO range 0x00001180-0x000011af conflicts with OpRegion 0x00001180-0x000011ff (\SB_.PCI0.LPC_.PMIO) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver.
lpc_ich: Resource conflict(s) found affecting gpio_ich

Jan