Update ETERNUS DX entry
PATCH 1/1 Update ETERNUS DX entry
Add DX500 S3/DX600 S3.
Signed-off-by Sebastian Herbszt <[email protected]>
--- libmultipath/hwtable.c | 2 +- multipath.conf.defaults | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
libmultipath/hwtable.c +1 -1
@@ -308,7 +308,7 @@ static struct hwentry default_hw[] = { }, { .vendor = "FUJITSU", - .product = "ETERNUS_DX(L|400|8000)", + .product = "ETERNUS_DX(L|M|400|8000)", .features = "1 queue_if_no_path", .hwhandler = DEFAULT_HWHANDLER, .pgpolicy = GROUP_BY_PRIO,
multipath.conf.defaults +1 -1
@@ -285,7 +285,7 @@ # } # device { # vendor "FUJITSU" -# product "ETERNUS_DX(L|400|8000)" +# product "ETERNUS_DX(L|M|400|8000)" # path_grouping_policy "group_by_prio" # path_checker "tur" # features "1 queue_if_no_path"
Signature · 1 line
1.9.3
Quoted 26 lines · I wrote:
Add DX500 S3/DX600 S3.
Signed-off-by Sebastian Herbszt <[email protected]>--- libmultipath/hwtable.c | 2 +- multipath.conf.defaults | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)libmultipath/hwtable.c +1
-1@@ -308,7 +308,7 @@ static struct hwentry default_hw[] = { }, { .vendor = "FUJITSU", - .product = "ETERNUS_DX(L|400|8000)", + .product = "ETERNUS_DX(L|M|400|8000)", .features = "1 queue_if_no_path", .hwhandler = DEFAULT_HWHANDLER, .pgpolicy = GROUP_BY_PRIO,multipath.conf.defaults +0
-0
multipath.conf.defaults line 291
Quoted 8 lines
multipath.conf.defaults +1
-1@@ -285,7 +285,7 @@ # } # device { # vendor "FUJITSU" -# product "ETERNUS_DX(L|400|8000)" +# product "ETERNUS_DX(L|M|400|8000)" # path_grouping_policy "group_by_prio" # path_checker "tur" # features "1 queue_if_no_path"
Christophe, can you apply this?
Sebastian
Sorry, the patch was lost in the backlog.
Applied,
Thanks.
Quoted 40 lines · Sebastian Herbszt
Quoted 26 lines · I wrote:
Add DX500 S3/DX600 S3.
Signed-off-by Sebastian Herbszt <[email protected]>--- libmultipath/hwtable.c | 2 +- multipath.conf.defaults | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)libmultipath/hwtable.c +1
-1@@ -308,7 +308,7 @@ static struct hwentry default_hw[] = { }, { .vendor = "FUJITSU", - .product = "ETERNUS_DX(L|400|8000)", + .product = "ETERNUS_DX(L|M|400|8000)", .features = "1 queue_if_no_path", .hwhandler = DEFAULT_HWHANDLER, .pgpolicy = GROUP_BY_PRIO,multipath.conf.defaults +0
-0multipath.conf.defaults line 291
Quoted 8 lines
multipath.conf.defaults +1
-1@@ -285,7 +285,7 @@ # } # device { # vendor "FUJITSU" -# product "ETERNUS_DX(L|400|8000)" +# product "ETERNUS_DX(L|M|400|8000)" # path_grouping_policy "group_by_prio" # path_checker "tur" # features "1 queue_if_no_path"Christophe, can you apply this?
Sebastian