Skip to contentSkip to conversation

Update ETERNUS DX entry

PATCH In review Sebastian Herbszt 2 participants 3 messages Jun 30, 2014 – Aug 28, 2014 Device mapper

lore
Share & tools
lore

Sebastian Herbszt

author
#0 lore raw

PATCH 1/1 Update ETERNUS DX entry

Add DX500 S3/DX600 S3.

Signed-off-by Sebastian Herbszt <[email protected]>
---
 libmultipath/hwtable.c  | 2 +-
 multipath.conf.defaults | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
libmultipath/hwtable.c +1 -1
index bb73a40..b774453 100644
@@ -308,7 +308,7 @@ static struct hwentry default_hw[] = {
 	},
 	{
 		.vendor        = "FUJITSU",
-		.product       = "ETERNUS_DX(L|400|8000)",
+		.product       = "ETERNUS_DX(L|M|400|8000)",
 		.features      = "1 queue_if_no_path",
 		.hwhandler     = DEFAULT_HWHANDLER,
 		.pgpolicy      = GROUP_BY_PRIO,
multipath.conf.defaults +1 -1
index 12fb3f0..654be97 100644
@@ -285,7 +285,7 @@
 #	}
 #	device {
 #		vendor "FUJITSU"
-#		product "ETERNUS_DX(L|400|8000)"
+#		product "ETERNUS_DX(L|M|400|8000)"
 #		path_grouping_policy "group_by_prio"
 #		path_checker "tur"
 #		features "1 queue_if_no_path"
Signature · 1 line
1.9.3
author
#1 lore raw
Quoted 26 lines · I wrote:

Add DX500 S3/DX600 S3.

Signed-off-by Sebastian Herbszt <[email protected]>
---
 libmultipath/hwtable.c  | 2 +-
 multipath.conf.defaults | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
libmultipath/hwtable.c +1 -1
index bb73a40..b774453 100644
@@ -308,7 +308,7 @@ static struct hwentry default_hw[] = {
 	},
 	{
 		.vendor        = "FUJITSU",
-		.product       = "ETERNUS_DX(L|400|8000)",
+		.product       = "ETERNUS_DX(L|M|400|8000)",
 		.features      = "1 queue_if_no_path",
 		.hwhandler     = DEFAULT_HWHANDLER,
 		.pgpolicy      = GROUP_BY_PRIO,
multipath.conf.defaults +0 -0
index 12fb3f0..654be97 100644

multipath.conf.defaults line 291

Quoted 8 lines
multipath.conf.defaults +1 -1
@@ -285,7 +285,7 @@
 #	}
 #	device {
 #		vendor "FUJITSU"
-#		product "ETERNUS_DX(L|400|8000)"
+#		product "ETERNUS_DX(L|M|400|8000)"
 #		path_grouping_policy "group_by_prio"
 #		path_checker "tur"
 #		features "1 queue_if_no_path"

Christophe, can you apply this?

Sebastian

#2 lore raw

Sorry, the patch was lost in the backlog.
Applied,
Thanks.

Quoted 40 lines · Sebastian Herbszt
Quoted 26 lines · I wrote:

Add DX500 S3/DX600 S3.

Signed-off-by Sebastian Herbszt <[email protected]>
---
 libmultipath/hwtable.c  | 2 +-
 multipath.conf.defaults | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
libmultipath/hwtable.c +1 -1
index bb73a40..b774453 100644
@@ -308,7 +308,7 @@ static struct hwentry default_hw[] = {
      },
      {
              .vendor        = "FUJITSU",
-             .product       = "ETERNUS_DX(L|400|8000)",
+             .product       = "ETERNUS_DX(L|M|400|8000)",
              .features      = "1 queue_if_no_path",
              .hwhandler     = DEFAULT_HWHANDLER,
              .pgpolicy      = GROUP_BY_PRIO,
multipath.conf.defaults +0 -0
index 12fb3f0..654be97 100644

multipath.conf.defaults line 291

Quoted 8 lines
multipath.conf.defaults +1 -1
@@ -285,7 +285,7 @@
 #    }
 #    device {
 #            vendor "FUJITSU"
-#            product "ETERNUS_DX(L|400|8000)"
+#            product "ETERNUS_DX(L|M|400|8000)"
 #            path_grouping_policy "group_by_prio"
 #            path_checker "tur"
 #            features "1 queue_if_no_path"

Christophe, can you apply this?

Sebastian