"Btrfs: device_list_add() should not update list when mounted" breaks subvol mount
commit b96de000bc8bc9688b3a2abea4332bd57648a49f breaks subvolume mount on one of my systems. I've bisected a mount problem to this commit. Situation is:
- one hdd with btrfs
- default subvolume (rootfs) is different from subovlid=0
- at boot, several subvols are mounted at /home/$DIR
after commit b96de000bc8bc9688b3a2abea4332bd57648a49f this is not possible anymore. Trying to mount results in (example):
mount: /dev/sda1 is already mounted or /home/video busy
The output of btrfs show is curious too:
btrfs fi show
Label: none uuid: 43438ef5-adac-46a9-823e-14951ee6866a
Total devices 1 FS bytes used 150.05GiB *** Some devices missing
Btrfs v3.16
As this is a laptop with only one drive bay, this was never a multi device setup. I've two more systems with kernel version >3.17-rc3 running and no problem like this.
regards,
Johannes
that's shocking. Let me take a look.
Thanks for reporting.
Anand
Quoted 33 lines · Johannes Hirte
commit
b96de000bc8bc9688b3a2abea4332bd57648a49fbreaks subvolume mount on one of my systems. I've bisected a mount problem to this commit. Situation is:- one hdd with btrfs
- default subvolume (rootfs) is different from subovlid=0
- at boot, several subvols are mounted at/home/$DIRafter commit
b96de000bc8bc9688b3a2abea4332bd57648a49fthis is not possible anymore. Trying to mount results in (example):mount:
/dev/sda1is already mounted or/home/videobusyThe output of btrfs show is curious too:
btrfs fi show
Label: none uuid: 43438ef5-adac-46a9-823e-14951ee6866a
Total devices 1 FS bytes used 150.05GiB *** Some devices missingBtrfs v3.16
As this is a laptop with only one drive bay, this was never a multi device setup. I've two more systems with kernel version >3.17-rc3 running and no problem like this.
regards,
Johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Johannes,
Quoted 2 lines
I've two more systems with kernel version >3.17-rc3 running and no problem like this.
Does this 3.17-rc3 also has the same type of subvol config and it mount operation/sequence as you mentioned ?
Quoted 3 lines
- one hdd with btrfs
- default subvolume (rootfs) is different from subovlid=0
- at boot, several subvols are mounted at/home/$DIR
I ran a few tests, on our mainline
----
mount -o subvol=sv1 /dev/sdh1 /btrfs
mount /dev/sdh1 /btrfs
mount: /dev/sdh1 already mounted or /btrfs busy [*]
mount /dev/sdh1 /btrfs1
echo $?
0
-----
[*] hope this isn't the problem you are mentioning.
Thanks, Anand
Hi,
On standard ubuntu 14.04 a with an encrypted (cryptsetup) /home as brtfs subvolume we have the following results:
3.17-rc2 : Ok.
3.17-rc3 and 3.17-rc4 : /home fails to mount on boot. If one try mount -a then the system tells that the partition is already mounted according to matab.
On a 3.17-rc4, btrfs fi sh returns nothing special:
"
Label: none uuid: f4f554bb-57d9-4647-ab14-ea978c9e7e9f
Total devices 1 FS bytes used 131.41GiB
devid 1 size 173.31GiB used 134.03GiB path /dev/sda5
Btrfs v3.12
"
I'm not sure if it has something to do with cryptsetup...
Xavier
Quoted 29 lines
Hi Johannes,
Quoted 2 lines
I've two more systems with kernel version >3.17-rc3 running and no problem like this.
Does this 3.17-rc3 also has the same type of subvol config and it mount operation/sequence as you mentioned ?
Quoted 3 lines
- one hdd with btrfs
- default subvolume (rootfs) is different from subovlid=0
- at boot, several subvols are mounted at/home/$DIRI ran a few tests, on our mainline
----
mount -o subvol=sv1/dev/sdh1/btrfs
mount/dev/sdh1/btrfs
mount:/dev/sdh1already mounted or /btrfs busy [*]
mount/dev/sdh1/btrfs1
echo $?
0
-----[*] hope this isn't the problem you are mentioning.
Thanks, Anand
Signature · 3 lines
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Xavier,
Thanks for the report.
I got this reproduced: its a very corner case, it depends on the device path given in the subsequent subvol mounts, the fix appear to be outside of this patch at this moment and I am digging to know if we need to normalize the device path before using it in the btrfs kernel, just like btrfs-progs did recently.
reproducer:
ls -l /root/dev/sde-link
/root/dev/sde-link -> /dev/sde
mount -o device=/root/dev/sde-link /dev/sdd /btrfs1 btrfs fi show
Label: none uuid: 943bf422-998c-4640-9d7f-d49f17b782ce
Total devices 2 FS bytes used 272.00KiB
devid 1 size 1.52GiB used 339.50MiB path /dev/sdd
devid 2 size 1.52GiB used 319.50MiB path /root/dev/sde-link
mount -o subvol=sv1,device=/dev/sde /dev/sdd /btrfs <-shouldn't fail.
mount: /dev/sdd already mounted or /btrfs busy
mount: according to mtab, /dev/sdd is mounted on /btrfs1
mount -o device=/root/dev/sde-link /dev/sdd /btrfs
echo $?
0
Xavier, Johannes,
The quickest workaround for you will be to try to match
the device path as in the btrfs fi show -m </mnt> output to your probably fstab/mnttab entry.
Anand
Quoted 50 lines · On 09/13/2014 04:43 AM, [email protected] wrote:
Hi,
On standard ubuntu 14.04 a with an encrypted (cryptsetup) /home as brtfs subvolume we have the following results:
3.17-rc2 : Ok.
3.17-rc3 and 3.17-rc4 : /home fails to mount on boot. If one try mount -a then the system tells that the partition is already mounted according to matab.On a 3.17-rc4, btrfs fi sh returns nothing special:
"
Label: none uuid: f4f554bb-57d9-4647-ab14-ea978c9e7e9f
Total devices 1 FS bytes used 131.41GiB
devid 1 size 173.31GiB used 134.03GiB path/dev/sda5Btrfs v3.12
"I'm not sure if it has something to do with cryptsetup...
Xavier
Quoted 25 lines
Hi Johannes,
Quoted 2 lines
I've two more systems with kernel version >3.17-rc3 running and no problem like this.
Does this 3.17-rc3 also has the same type of subvol config and it mount operation/sequence as you mentioned ?
Quoted 3 lines
- one hdd with btrfs
- default subvolume (rootfs) is different from subovlid=0
- at boot, several subvols are mounted at/home/$DIRI ran a few tests, on our mainline
----
mount -o subvol=sv1/dev/sdh1/btrfs
mount/dev/sdh1/btrfs
mount:/dev/sdh1already mounted or /btrfs busy [*]
mount/dev/sdh1/btrfs1
echo $?
0
-----[*] hope this isn't the problem you are mentioning.
Thanks, Anand
Quoted 5 lines · On Sat, 13 Sep 2014 13:36:37 +0800 Anand Jain <[email protected]> wrote:
Xavier, Johannes,
The quickest workaround for you will be to try to match
the device path as in the btrfs fi show -m </mnt> output to your probably fstab/mnttab entry.
Doesn't work here. I don't even get a path with the affected kernels. I'll get:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB *** Some devices missing
Btrfs v3.16
with a working kernel:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB
devid 1 size 293.89GiB used 289.06GiB path /dev/sda1
Btrfs v3.16
Filesystem layout is:
subvolid 0 contains only the different subvolumes
ID 257 gen 414674 top level 5 path rootfs
ID 269 gen 414615 top level 5 path home-USER1
ID 317 gen 411498 top level 5 path home-USER2
ID 363 gen 410939 top level 5 path home-USER3
ID 382 gen 315844 top level 5 path home-USER4
ID 933 gen 410514 top level 5 path home-USER5
ID 995 gen 315756 top level 5 path homefs-USER6
subvol rootfs (ID 257) is set to the default subvolume, mounted at start. Grub commandline is like following:
root=/dev/sda1 ro rootflags=subvol=rootfs,inode_cache,autodefrag
It doesn't matter, if the subvol parameter is set. I've tried with, without and with subvolid=0 parameter. Everytime the same result.
And now I was able to reproduce on a second machine. The main difference between the affected and the unaffected systems is initramfs. On the affected systems, I don't use one. On the working systems, the rootfs is mounted via initramfs before. I'll test, if an initramfs will solve the issue. Seems likely, cause if I put the disk of an affected system into a working system and mount it there, everything works.
regards,
Johannes
Quoted 47 lines · On Sat, 13 Sep 2014 19:55:25 +0200 Johannes Hirte…
Quoted 5 lines · On Sat, 13 Sep 2014 13:36:37 +0800 Anand Jain <[email protected]> wrote:
Xavier, Johannes,
The quickest workaround for you will be to try to match
the device path as in the btrfs fi show -m </mnt> output to your probably fstab/mnttab entry.Doesn't work here. I don't even get a path with the affected kernels. I'll get:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB *** Some devices missingBtrfs v3.16
with a working kernel:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB
devid 1 size 293.89GiB used 289.06GiB path/dev/sda1Btrfs v3.16
Filesystem layout is:
subvolid 0 contains only the different subvolumes
ID 257 gen 414674 top level 5 path rootfs
ID 269 gen 414615 top level 5 path home-USER1
ID 317 gen 411498 top level 5 path home-USER2
ID 363 gen 410939 top level 5 path home-USER3
ID 382 gen 315844 top level 5 path home-USER4
ID 933 gen 410514 top level 5 path home-USER5
ID 995 gen 315756 top level 5 path homefs-USER6subvol rootfs (ID 257) is set to the default subvolume, mounted at start. Grub commandline is like following:
root=/dev/sda1 ro rootflags=subvol=rootfs,inode_cache,autodefrag
It doesn't matter, if the subvol parameter is set. I've tried with, without and with subvolid=0 parameter. Everytime the same result.
Quoted 7 lines
And now I was able to reproduce on a second machine. The main difference between the affected and the unaffected systems is initramfs. On the affected systems, I don't use one. On the working systems, the rootfs is mounted via initramfs before. I'll test, if an initramfs will solve the issue. Seems likely, cause if I put the disk of an affected system into a working system and mount it there, everything works.
Of course, with the initramfs it works. Content of the init-script:
#!/bin/sh
mount -t devtmpfs devtmpfs /dev mount -t proc proc /proc
mount -t sysfs sysfs /sys
mount -t tmpfs tmpfs /run
sleep 3 # wait for kernel msgs to quiet
echo "loading initrd"
btrfs dev scan
sleep 5
mount -o ro,subvol=rootfs,inode_cache,autodefrag /dev/sda1 /newroot
if [[ -x /newroot/sbin/init ]]; then
umount /sys /proc
exec switch_root /newroot /sbin/init
fi
#rescue shell
exec sh
Johannes Hirte posted on Sat, 13 Sep 2014 23:23:20 +0200 as excerpted:
Quoted 35 lines
Quoted 24 lines · On Sat, 13 Sep 2014 19:55:25 +0200 Johannes Hirte…
Quoted 3 lines · On Sat, 13 Sep 2014 13:36:37 +0800 Anand Jain <[email protected]> wrote:
The quickest workaround for you will be to try to match the device path as in the btrfs fi show -m </mnt> output to your probably fstab/mnttab entry.
Doesn't work here. I don't even get a path with the affected kernels. I'll get:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB *** Some devices missingBtrfs v3.16
with a working kernel:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB devid 1 size 293.89GiB used 289.06GiB path/dev/sda1Btrfs v3.16
Quoted 7 lines
And now I was able to reproduce on a second machine. The main difference between the affected and the unaffected systems is initramfs. On the affected systems, I don't use one. On the working systems, the rootfs is mounted via initramfs before. I'll test, if an initramfs will solve the issue. Seems likely, cause if I put the disk of an affected system into a working system and mount it there, everything works.
Quoted 1 line
Of course, with the initramfs it works.
I see a btrfs device scan in the initramfs script. What happens if you simply run btrfs device scan manually, before doing btrfs filesystem show?
I'm guessing that'll fix it.
Explanation assuming it does: Without the scan and without an initr*, you're pointing the kernel directly at the single-device btrfs using the root= kernel commandline option and that works, but the kernel still doesn't really know what device it's dealing with until after a scan to tell it.
If that doesn't fix it, I'm guessing the same explanation, but for some reason the scan has to be run before the filesystem is mounted. Thus running it from the initr* works, since it's before the real-root gets mounted, but running it directly from the mounted root after it's mounted using root= doesn't work, because it's already mounted by the time the scan is run.
Signature · 3 lines
Duncan - List replies preferred. No HTML msgs. "Every nonfree program has a lord, a master -- and if you use the program, he is your master." Richard Stallman
Quoted 37 lines · On Sun, 14 Sep 2014 00:45:49 +0000 (UTC) Duncan <[email protected]> wrote:
Johannes Hirte posted on Sat, 13 Sep 2014 23:23:20 +0200 as excerpted:
Quoted 35 lines
Quoted 31 lines · On Sat, 13 Sep 2014 19:55:25 +0200 Johannes Hirte…
Quoted 3 lines · On Sat, 13 Sep 2014 13:36:37 +0800 Anand Jain <[email protected]> wrote:
The quickest workaround for you will be to try to match the device path as in the btrfs fi show -m </mnt> output to your probably fstab/mnttab entry.
Doesn't work here. I don't even get a path with the affected kernels. I'll get:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB *** Some devices missingBtrfs v3.16
with a working kernel:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB devid 1 size 293.89GiB used 289.06GiB path/dev/sda1Btrfs v3.16
And now I was able to reproduce on a second machine. The main difference between the affected and the unaffected systems is initramfs. On the affected systems, I don't use one. On the working systems, the rootfs is mounted via initramfs before. I'll test, if an initramfs will solve the issue. Seems likely, cause if I put the disk of an affected system into a working system and mount it there, everything works.
Quoted 7 lines
Quoted 1 line
Of course, with the initramfs it works.
I see a btrfs device scan in the initramfs script. What happens if you simply run btrfs device scan manually, before doing btrfs filesystem show?
I'm guessing that'll fix it.
Not tested, but I doubt it will fix it. In this initramfs it is a leftover from a time, when the system was multi-device. On two other systems, initramfs works without the scan. Additionally I can put the affected HDD from the laptop and put it into/on another system, that is affected without initramfs. I can mount it there without any scan before. But I'm not 100% sure if udev takes responsibility for scanning here.
regards,
Johannes
Hi Johannes,
Can I have you this tested.. ? Thanks.
-------
fs/btrfs/volumes.c +2 -1
@@ -533,7 +533,7 @@ static noinline int device_list_add(const char *path,* the btrfs dev scan cli, after FS has been mounted. */ if (fs_devices->opened) { -return -EBUSY ; + goto out; }else {/* * That is if the FS is _not_ mounted and if you
@@ -566,6 +566,7 @@ static noinline int device_list_add(const char *path,if (!fs_devices->opened) device->generation = found_transid; +out: *fs_devices_ret = fs_devices;return ret;
-------
Anand
Quoted 87 lines · Johannes Hirte
Quoted 47 lines · On Sat, 13 Sep 2014 19:55:25 +0200 Johannes Hirte…
Quoted 5 lines · On Sat, 13 Sep 2014 13:36:37 +0800 Anand Jain <[email protected]> wrote:
Xavier, Johannes,
The quickest workaround for you will be to try to match
the device path as in the btrfs fi show -m </mnt> output to your probably fstab/mnttab entry.Doesn't work here. I don't even get a path with the affected kernels. I'll get:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB *** Some devices missingBtrfs v3.16
with a working kernel:
Label: none uuid: 02edbd6b-f044-4800-b21e-ca8982c2c2e5
Total devices 1 FS bytes used 270.10GiB
devid 1 size 293.89GiB used 289.06GiB path/dev/sda1Btrfs v3.16
Filesystem layout is:
subvolid 0 contains only the different subvolumes
ID 257 gen 414674 top level 5 path rootfs
ID 269 gen 414615 top level 5 path home-USER1
ID 317 gen 411498 top level 5 path home-USER2
ID 363 gen 410939 top level 5 path home-USER3
ID 382 gen 315844 top level 5 path home-USER4
ID 933 gen 410514 top level 5 path home-USER5
ID 995 gen 315756 top level 5 path homefs-USER6subvol rootfs (ID 257) is set to the default subvolume, mounted at start. Grub commandline is like following:
root=/dev/sda1 ro rootflags=subvol=rootfs,inode_cache,autodefrag
It doesn't matter, if the subvol parameter is set. I've tried with, without and with subvolid=0 parameter. Everytime the same result.
Quoted 7 lines
And now I was able to reproduce on a second machine. The main difference between the affected and the unaffected systems is initramfs. On the affected systems, I don't use one. On the working systems, the rootfs is mounted via initramfs before. I'll test, if an initramfs will solve the issue. Seems likely, cause if I put the disk of an affected system into a working system and mount it there, everything works.
Of course, with the initramfs it works. Content of the init-script:
#!/bin/sh
mount -t devtmpfs devtmpfs /dev
mount -t proc proc /proc
mount -t sysfs sysfs /sys
mount -t tmpfs tmpfs /run
sleep 3 # wait for kernel msgs to quietecho "loading initrd"
btrfs dev scan
sleep 5mount -o ro,subvol=rootfs,inode_cache,autodefrag
/dev/sda1/newrootif [[ -x /newroot/sbin/init ]]; then
umount /sys /proc
execswitch_root/newroot/sbin/init
fi#rescue shell
exec sh
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 24 lines · On Mon, 15 Sep 2014 20:32:58 +0800 Anand Jain <[email protected]> wrote:
Hi Johannes,
Can I have you this tested.. ? Thanks.
-------
fs/btrfs/volumes.c +1
-1@@ -533,7 +533,7 @@ static noinline int device_list_add(const char*path, * the btrfs dev scan cli, after FS has been mounted. */ if (fs_devices->opened) { -return -EBUSY ; + goto out; }else {/* * That is if the FS is _not_ mounted and if
you @@ -566,6 +566,7 @@ static noinline int device_list_add(const char *path, if (!fs_devices->opened)
Quoted 7 lines
device->generation = found_transid;+out:
*fs_devices_ret = fs_devices; return ret;-------
With this change, it works again without initramfs.
regards,
Johannes
Quoted 29 lines · Johannes Hirte
Quoted 26 lines · On Mon, 15 Sep 2014 20:32:58 +0800 Anand Jain <[email protected]> wrote:
Hi Johannes,
Can I have you this tested.. ? Thanks.
-------
fs/btrfs/volumes.c +1
-1@@ -533,7 +533,7 @@ static noinline int device_list_add(const char*path, * the btrfs dev scan cli, after FS has been mounted. */ if (fs_devices->opened) { -return -EBUSY ; + goto out; }else {/* * That is if the FS is _not_ mounted and if
you @@ -566,6 +566,7 @@ static noinline int device_list_add(const char *path, if (!fs_devices->opened)device->generation = found_transid;
Quoted 7 lines
Quoted 5 lines
+out:
*fs_devices_ret = fs_devices; return ret;-------
With this change, it works again without initramfs.
Thanks. I am bit confused, is there any configuration that is still not working, even with the above changes.
Anand
Quoted 7 lines
regards,
Johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 40 lines · On Tue, 16 Sep 2014 01:39:49 +0800 Anand Jain <[email protected]> wrote:
Quoted 29 lines · Johannes Hirte
Quoted 26 lines · On Mon, 15 Sep 2014 20:32:58 +0800 Anand Jain <[email protected]> wrote:
Hi Johannes,
Can I have you this tested.. ? Thanks.
-------
fs/btrfs/volumes.c +0
-0@@ -533,7 +533,7 @@ static noinline int device_list_add(const char *path, * the btrfs dev scan cli, after FS has beenmounted. */
if (fs_devices->opened) {fs/btrfs/volumes.c +1
-1-return -EBUSY ; + goto out; }else {/* * That is if the FS is _not_ mounted and if you @@ -566,6 +566,7 @@ static noinline int device_list_add(const char *path, if (!fs_devices->opened)
device->generation = found_transid;Quoted 7 lines
Quoted 5 lines
+out:
*fs_devices_ret = fs_devices; return ret;-------
With this change, it works again without initramfs.
Quoted 4 lines
Thanks. I am bit confused, is there any configuration that is still not working, even with the above changes.
Anand
At moment, I'm not aware of any. But I will test the remaining systems I have.
regards,
Johannes
Johannes, Xavier,
Can you pls send the output for ..
cat /etc/fstab | egrep btrfs
cat /proc/self/mounts | egrep btrfs
mount | egrep btrfs
Thanks, Anand
Quoted 58 lines · Johannes Hirte
Quoted 40 lines · On Tue, 16 Sep 2014 01:39:49 +0800 Anand Jain <[email protected]> wrote:
Quoted 29 lines · Johannes Hirte
Quoted 26 lines · On Mon, 15 Sep 2014 20:32:58 +0800 Anand Jain <[email protected]> wrote:
Hi Johannes,
Can I have you this tested.. ? Thanks.
-------
fs/btrfs/volumes.c +0
-0@@ -533,7 +533,7 @@ static noinline int device_list_add(const char *path, * the btrfs dev scan cli, after FS has beenmounted. */
if (fs_devices->opened) {fs/btrfs/volumes.c +1
-1-return -EBUSY ; + goto out; }else {/* * That is if the FS is _not_ mounted and if you @@ -566,6 +566,7 @@ static noinline int device_list_add(const char *path, if (!fs_devices->opened)
device->generation = found_transid;Quoted 7 lines
Quoted 5 lines
+out:
*fs_devices_ret = fs_devices; return ret;-------
With this change, it works again without initramfs.
Quoted 4 lines
Thanks. I am bit confused, is there any configuration that is still not working, even with the above changes.
Anand
At moment, I'm not aware of any. But I will test the remaining systems I have.
regards,
Johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 5 lines
Quoted 5 lines
And now I was able to reproduce on a second machine. The main difference between the affected and the unaffected systems is initramfs. On the affected systems, I don't use one.
In this test of with or without initramfs script. I guess the kernel remain same at 3.17-rc3 and above
Quoted 16 lines
Quoted 5 lines
On the working
systems, the rootfs is mounted via initramfs before. I'll test, if an initramfs will solve the issue. Seems likely, cause if I put the disk of an affected system into a working system and mount it there, everything works.Of course, with the initramfs it works. Content of the init-script:
#!/bin/sh
mount -t devtmpfs devtmpfs /dev mount -t proc proc /proc
mount -t sysfs sysfs /sys
mount -t tmpfs tmpfs /run
sleep 3 # wait for kernel msgs to quiet
Quoted 6 lines
echo "loading initrd"
btrfs dev scan
sleep 5mount -o ro,subvol=rootfs,inode_cache,autodefrag
/dev/sda1/newroot
this will work since the device path that we provide here is already the device path which probably will be the final device path after bootup.
Thanks
Quoted 7 lines
if [[ -x /newroot/sbin/init ]]; then
umount /sys /proc
execswitch_root/newroot/sbin/init
fi#rescue shell
exec sh
The way an encrypted home is mounted is based on links as described here:
https://help.ubuntu.com/community/EncryptedPrivateDirectory
It used to be ok before 3.17-rc3 and df -h shows:
/dev/sda5 363G 128G 217G 38% / /home/gnata/.Private 363G 128G 217G 38% /home/gnata
It is suppose to work with a kernel >3.17-rc3 when "home" btrfs is a subvolume?
Does it make sense to test "[PATCH] btrfs-progs: canonicalize pathnames for device commands" or it is premature?
Xavier
Quoted 92 lines
Hi Xavier,
Thanks for the report.
I got this reproduced: its a very corner case, it depends on the device path given in the subsequent subvol mounts, the fix appear to be outside of this patch at this moment and I am digging to know if we need to normalize the device path before using it in the btrfs kernel, just like btrfs-progs did recently.
reproducer:
ls -l/root/dev/sde-link
/root/dev/sde-link->/dev/sdemount -o device=/root/dev/sde-link
/dev/sdd/btrfs1 btrfs fi show
Label: none uuid: 943bf422-998c-4640-9d7f-d49f17b782ce
Total devices 2 FS bytes used 272.00KiB
devid 1 size 1.52GiB used 339.50MiB path/dev/sdd
devid 2 size 1.52GiB used 319.50MiB path/root/dev/sde-linkmount -o subvol=sv1,device=/dev/sde
/dev/sdd/btrfs <-shouldn't fail.
mount:/dev/sddalready mounted or /btrfs busy
mount: according to mtab,/dev/sddis mounted on /btrfs1mount -o device=/root/dev/sde-link
/dev/sdd/btrfs
echo $?
0Xavier, Johannes,
The quickest workaround for you will be to try to match
the device path as in the btrfs fi show -m </mnt> output to your probably fstab/mnttab entry.Anand
Quoted 50 lines · On 09/13/2014 04:43 AM, [email protected] wrote:
Hi,
On standard ubuntu 14.04 a with an encrypted (cryptsetup) /home as brtfs subvolume we have the following results:
3.17-rc2 : Ok.
3.17-rc3 and 3.17-rc4 : /home fails to mount on boot. If one try mount -a then the system tells that the partition is already mounted according to matab.On a 3.17-rc4, btrfs fi sh returns nothing special:
"
Label: none uuid: f4f554bb-57d9-4647-ab14-ea978c9e7e9f
Total devices 1 FS bytes used 131.41GiB
devid 1 size 173.31GiB used 134.03GiB path/dev/sda5Btrfs v3.12
"I'm not sure if it has something to do with cryptsetup...
Xavier
Quoted 25 lines
Hi Johannes,
Quoted 2 lines
I've two more systems with kernel version >3.17-rc3 running and no problem like this.
Does this 3.17-rc3 also has the same type of subvol config and it mount operation/sequence as you mentioned ?
Quoted 3 lines
- one hdd with btrfs
- default subvolume (rootfs) is different from subovlid=0
- at boot, several subvols are mounted at/home/$DIRI ran a few tests, on our mainline
----
mount -o subvol=sv1/dev/sdh1/btrfs
mount/dev/sdh1/btrfs
mount:/dev/sdh1already mounted or /btrfs busy [*]
mount/dev/sdh1/btrfs1
echo $?
0
-----[*] hope this isn't the problem you are mentioning.
Thanks, Anand