ARM: dts: Add initial DTS file for Sony Xperia Z1 phone
Subsystems (3)
PATCH 1/1 ARM: dts: Add initial DTS file for Sony Xperia Z1 phone
This DTS has initial support for just a serial console, for the Sony Xperia Z1 phone. This phone uses a QualComm 8074 processor.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -341,6 +341,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ + qcom-apq8074-xperia-z1.dtb \ qcom-apq8084-mtp.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +18 -0
@@ -0,0 +1,18 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1 phone"; + compatible = "qcom,msm8974"; + qcom,msm-id = <126 8 0>, <185 8 0>, <186 8 0>; + + memory at 0 { + reg = <0 0x40000000>, <0x40000000 0x40000000>; + device_type = "memory"; + }; +}; + +&soc { + serial at f991e000 { + status = "ok"; + }; +};
Signature · 1 line
1.7.9.5
Quoted 3 lines · Tim Bird
This DTS has initial support for just a serial console, for the Sony Xperia Z1 phone. This phone uses a QualComm 8074 processor.
Qualcomm, the C isn?t caps.
Quoted 25 lines
Signed-off-by Tim Bird <[email protected]>---
arch/arm/boot/dts/Makefile| 1 +arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts| 18 ++++++++++++++++++2 files changed, 19 insertions(+)create mode 100644
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dtsarch/arm/boot/dts/Makefile +1
-0@@ -341,6 +341,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ + qcom-apq8074-xperia-z1.dtb \ qcom-apq8084-mtp.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtbarch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +0
-0
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts line 5
Quoted 5 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +5
-0@@ -0,0 +1,18 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1 phone"; + compatible = "qcom,msm8974?;
Should have a board compat as well
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts line 6
Quoted 1 line
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +1
-0+ qcom,msm-id = <126 8 0>, <185 8 0>, <186 8 0>;
We don?t have qcom,msm-id upstream at this time.
Quoted 15 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +12
-0+ + memory at 0 { + reg = <0 0x40000000>, <0x40000000 0x40000000>; + device_type = "memory"; + }; +}; + +&soc { + serial at f991e000 { + status = "ok"; + }; +};Signature · 1 line
1.7.9.5
Signature · 2 lines
Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Quoted 8 lines · Kumar Gala
Quoted 3 lines · Tim Bird
This DTS has initial support for just a serial console, for the Sony Xperia Z1 phone. This phone uses a QualComm 8074 processor.
Qualcomm, the C isn?t caps.
Will fix.
Quoted 25 lines
Quoted 25 lines
Signed-off-by Tim Bird <[email protected]>---
arch/arm/boot/dts/Makefile| 1 +arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts| 18 ++++++++++++++++++2 files changed, 19 insertions(+)create mode 100644
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dtsarch/arm/boot/dts/Makefile +1
-0@@ -341,6 +341,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ + qcom-apq8074-xperia-z1.dtb \ qcom-apq8084-mtp.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtbarch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +0
-0
Quoted 8 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts line 5
Quoted 6 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +5
-0@@ -0,0 +1,18 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1 phone"; + compatible = "qcom,msm8974?;Should have a board compat as well
I'll ask Bjorn what we want to do here. There was a compat that I stripped, but I'm not sure we settled on the official name we want. In any event, will fix.
Quoted 4 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts line 6
Quoted 2 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +1
-0+ qcom,msm-id = <126 8 0>, <185 8 0>, <186 8 0>;We don?t have qcom,msm-id upstream at this time.
Do I just leave this out, then?
Thanks.
-- Tim
P.S. By now you probably noticed I mis-typed device-tree at vger.kernel.org. I'll fix that also.
Quoted 46 lines · Tim Bird
Quoted 8 lines · Kumar Gala
Quoted 3 lines · Tim Bird
This DTS has initial support for just a serial console, for the Sony Xperia Z1 phone. This phone uses a QualComm 8074 processor.
Qualcomm, the C isn?t caps.
Will fix.
Quoted 25 lines
Quoted 25 lines
Signed-off-by Tim Bird <[email protected]>---
arch/arm/boot/dts/Makefile| 1 +arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts| 18 ++++++++++++++++++2 files changed, 19 insertions(+)create mode 100644
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dtsarch/arm/boot/dts/Makefile +1
-0@@ -341,6 +341,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ + qcom-apq8074-xperia-z1.dtb \ qcom-apq8084-mtp.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtbarch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +0
-0Quoted 8 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts line 5
Quoted 6 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +5
-0@@ -0,0 +1,18 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1 phone"; + compatible = "qcom,msm8974?;Should have a board compat as well
Quoted 8 lines
I'll ask Bjorn what we want to do here. There was a compat that I stripped, but I'm not sure we settled on the official name we want. In any event, will fix.
Quoted 4 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts line 6
Quoted 2 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +1
-0+ qcom,msm-id = <126 8 0>, <185 8 0>, <186 8 0>;We don?t have qcom,msm-id upstream at this time.
Do I just leave this out, then?
yes, lets drop it for now, unless you guys need it to boot the upstream kernel on your hw.
Quoted 5 lines
Thanks.
-- Tim
P.S. By now you probably noticed I mis-typed device-tree at vger.kernel.org. I'll fix that also.
Signature · 2 lines
Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Quoted 5 lines · Tim Bird
Quoted 2 lines · Kumar Gala
On Sep 16, 2014, at 4:03 PM, Tim Bird <[email protected]> wrote:
[..]
Quoted 5 lines
Quoted 4 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts line 6
Quoted 2 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +1
-0+ qcom,msm-id = <126 8 0>, <185 8 0>, <186 8 0>;We don’t have qcom,msm-id upstream at this time.
Do I just leave this out, then?
Both our tool to generate boot.img [1] and the Qualcomm equivalent require these to be there.
Last time I tried to concatenate the dtb to zImage and using the Google mkbootimg the bootloader refused to load the result. But please give it a test and maybe we can postpone adding this definition. Otherwise we need to add a definition - covering both the 8974 and 8974ab format.
[1] https://github.com/sonyxperiadev/mkqcdtbootimg
Regards,
Bjorn
Quoted 6 lines · Tim Bird
Quoted 3 lines · Kumar Gala
On Sep 16, 2014, at 4:03 PM, Tim Bird <[email protected]> wrote:
Quoted 40 lines
Quoted 5 lines
Quoted 3 lines
This DTS has initial support for just a serial console, for the Sony Xperia Z1 phone. This phone uses a QualComm 8074 processor.
Qualcomm, the C isn?t caps.
Will fix.
Quoted 33 lines
Quoted 26 lines
Signed-off-by Tim Bird <[email protected]>---
arch/arm/boot/dts/Makefile| 1 +arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts| 18 ++++++++++++++++++2 files changed, 19 insertions(+)create mode 100644
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dtsarch/arm/boot/dts/Makefile +1
-0@@ -341,6 +341,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8064-ifc6410.dtb \ qcom-apq8074-dragonboard.dtb \ + qcom-apq8074-xperia-z1.dtb \ qcom-apq8084-mtp.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtbarch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +0
-0arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts line 5
Quoted 5 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +5
-0@@ -0,0 +1,18 @@ +#include "qcom-msm8974.dtsi" + +/ { + model = "Sony Xperia Z1 phone"; + compatible = "qcom,msm8974?;Should have a board compat as well
Also need to add the board compat string, and "qcom,msm8974? to the list of strings in arch/arm/mach-qcom/board.c: qcom_dt_match[].
Quoted 19 lines
I'll ask Bjorn what we want to do here. There was a compat that I stripped, but I'm not sure we settled on the official name we want. In any event, will fix.
Quoted 4 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts line 6
Quoted 2 lines
arch/arm/boot/dts/qcom-apq8074-xperia-z1.dts new file +1
-0+ qcom,msm-id = <126 8 0>, <185 8 0>, <186 8 0>;We don?t have qcom,msm-id upstream at this time.
Do I just leave this out, then?
Thanks.
-- Tim
P.S. By now you probably noticed I mis-typed device-tree at vger.kernel.org. I'll fix that also. --
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
.