Skip to contentSkip to conversation

U-Boot v2015.01-rc3 released

U-Boot Tom Rini 5 participants 7 messages Dec 8, 2014 – Dec 9, 2014

lore
Share & tools
lore

Tom Rini

author
#0 lore raw

Hey all,

I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.

So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.

As always, if anything else is broken please speak up.

Thanks all!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141208/438574c6/attachment.pgp>
#1 lore raw

Dear Tom,

Quoted 3 lines · In message <20141208214410.GJ20704@bill-the-cat> you wrote:

I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.

Tarball is on the FTP server.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Artificial Intelligence is the study of how to  make  real  computers
act like the ones in movies.
#2 lore raw
In reply to Tom Rini
Quoted 10 lines · Tom Rini

Hey all,

I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.

So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.

As always, if anything else is broken please speak up.

On "mx53loco_defconfig" I'm getting:

drivers/built-in.o: In function `reset_sata':
/var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/scratch/u-boot/drivers/block/dwc_ahsata.c:611:
undefined reference to `disable_sata_clock' /var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
BFD (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)
2.24.0.20140829 Linaro 2014.09 assertion fail /cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/src/binutils-linaro-2.24.0-2014.09/bfd/elf32-arm.c:7710 /var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
error: required section '.rel.plt' not found in the linker script /var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
final link failed: Invalid operation
Makefile:1052: recipe for target 'u-boot' failed
make: *** [u-boot] Error 1

Which has a fix:

http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary

Looks like we

sata: fix reset_sata for dwc_ahsata

Regards,

Signature · 2 lines
Robert Nelson
http://www.rcn-ee.com/
#3 lore raw
Quoted 28 lines · Robert Nelson
Quoted 10 lines · Tom Rini

Hey all,

I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.

So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.

As always, if anything else is broken please speak up.

On "mx53loco_defconfig" I'm getting:

drivers/built-in.o: In function `reset_sata':
/var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/scratch/u-boot/drivers/block/dwc_ahsata.c:611:
undefined reference to `disable_sata_clock' /var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
BFD (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)
2.24.0.20140829 Linaro 2014.09 assertion fail /cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/src/binutils-linaro-2.24.0-2014.09/bfd/elf32-arm.c:7710 /var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
error: required section '.rel.plt' not found in the linker script /var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
final link failed: Invalid operation
Makefile:1052: recipe for target 'u-boot' failed
make: *** [u-boot] Error 1

Quoted 3 lines

Which has a fix:

http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary

(oh gmail and the evil cltr-enter shortcut...)

This commit:

http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commit;h=dd1c8f1b5fb63a682fce62a53464108d8587b0a2

Regards,

Signature · 2 lines
Robert Nelson
http://www.rcn-ee.com/
author
#4 lore raw
In reply to Robert Nelson
Quoted 13 lines · Robert Nelson
Quoted 10 lines · Tom Rini

Hey all,

I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.

So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.

As always, if anything else is broken please speak up.

On "mx53loco_defconfig" I'm getting:

[snip]

Quoted 3 lines

Which has a fix:

http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary

Yes, but I don't _think_ I missed a pull request. That said, I see:

$ ./tools/buildman/buildman -b master 'blackfin|microblaze|m68k|nds32|x86|aarch64|sandbox|mips|avr32|arm|powerpc'  -svel
boards.cfg is up to date. Nothing to do.
Summary of 1 commit for 1172 boards (6 threads, 1 job per thread)
01: Prepare v2015.01-rc3
  blackfin: +   ip04
       arm: +   mx53loco m53evk maxbcm ima3-mx53 odroid db-mv784mp-gp
   powerpc: +   ocotea taishan
+(ocotea) powerpc-linux-ld.bfd: section .bootpg loaded at [fffff000,fffff24f] overlaps section .u_boot_list loaded at [ffffe928,fffff17f]
+(ocotea) powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xfffff000 adjusted to 0xfffff180
+(ocotea,ip04,taishan) make[1]: *** [u-boot] Error 1
+(ip04) bfin-elf-ld.bfd: u-boot section `.bss' will not fit in region `ram'
+(ip04) bfin-elf-ld.bfd: region `ram' overflowed by 1308 bytes
+(m53evk,ima3-mx53,mx53loco)   disable_sata_clock();
+(m53evk,odroid,ima3-mx53,mx53loco)   ^
+(m53evk,ima3-mx53,mx53loco) drivers/built-in.o: In function `reset_sata':
+(m53evk,ima3-mx53,mx53loco) build/../drivers/block/dwc_ahsata.c:611: undefined reference to `disable_sata_clock'
+(m53evk,ima3-mx53,mx53loco) arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils for Ubuntu) 2.22.52.20120713 assertion fail ../../bfd/elf32-arm.c:7677
+(m53evk,ima3-mx53,mx53loco) arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils for Ubuntu) 2.22.52.20120713 assertion fail ../../bfd/elf32-arm.c:14086
+(m53evk,ima3-mx53,mx53loco) make[1]: *** [u-boot] Error 139
+(maxbcm)   u16 reg;
+(maxbcm)       ^
+(maxbcm)   u16 devadr = CONFIG_PHY_BASE_ADDR;
+(maxbcm) Didn't find the file 'board/maxbcm/binary.0' in 'build' which is mandatory to generate the image
+(maxbcm,db-mv784mp-gp) This file generally contains the DDR3 training code, and should be extracted from an existing bootable
+(maxbcm,db-mv784mp-gp) image for your board. See 'kwbimage -x' to extract it from an existing image.
+(maxbcm,db-mv784mp-gp) Could not create image
+(maxbcm,db-mv784mp-gp) make[1]: *** [u-boot.kwb] Error 1
+(odroid)    addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+(odroid)                                 ^
+(odroid) ../board/samsung/common/board.c:94:2: note: containing loop
+(odroid)   for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+(odroid) ../board/samsung/common/board.c:106:2: note: containing loop
+(taishan) powerpc-linux-ld.bfd: section .bootpg loaded at [fffff000,fffff24f] overlaps section .u_boot_list loaded@[ffffebd8,fffff547]
+(taishan) powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xfffff000 adjusted to 0xfffff548
+(db-mv784mp-gp) Didn't find the file 'board/Marvell/db-mv784mp-gp/binary.0' in 'build' which is mandatory to generate the image
w+(m53evk,ima3-mx53,mx53loco) ../drivers/block/dwc_ahsata.c: In function 'reset_sata':
w+(m53evk,ima3-mx53,mx53loco) ../drivers/block/dwc_ahsata.c:611:2: warning: implicit declaration of function 'disable_sata_clock' [-Wimplicit-function-declaration]
w+(maxbcm) ../board/maxbcm/maxbcm.c: In function 'reset_phy':
w+(maxbcm) ../board/maxbcm/maxbcm.c:68:6: warning: unused variable 'reg' [-Wunused-variable]
w+(maxbcm) ../board/maxbcm/maxbcm.c:66:6: warning: unused variable 'devadr' [-Wunused-variable]
w+(odroid) ../board/samsung/common/board.c: In function 'dram_init':
w+(odroid) ../board/samsung/common/board.c:95:32: warning: iteration 4u invokes undefined behavior [-Waggressive-loop-optimizations]
w+(odroid) ../board/samsung/common/board.c: In function 'dram_init_banksize':
w+(odroid) ../board/samsung/common/board.c:107:32: warning: iteration 4u invokes undefined behavior [-Waggressive-loop-optimizations]

Which to me are all top priority to get sorted out for -rc4.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141208/6a245162/attachment.pgp>
#5 lore raw
Quoted 13 lines · Tom Rini
Quoted 12 lines · Robert Nelson
Quoted 10 lines · Tom Rini

Hey all,

I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.

So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.

As always, if anything else is broken please speak up.

Quoted 8 lines
Quoted 1 line

On "mx53loco_defconfig" I'm getting:

[snip]

Quoted 3 lines

Which has a fix:

http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary

Yes, but I don't _think_ I missed a pull request. That said, I see:

I don't think there ever was a pull request with that fix. Cc-ing Stefano Babic

Signature · 2 lines
Regards,
Nikita Kiryanov
#6 lore raw
Quoted 21 lines · Nikita Kiryanov
Quoted 18 lines · Tom Rini
Quoted 14 lines · Robert Nelson
Quoted 11 lines · Tom Rini

Hey all,

I've pushed v2015.01-rc3 out to the repository and tarballs should exist
soon.

So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.

As always, if anything else is broken please speak up.

On "mx53loco_defconfig" I'm getting:

[snip]

Quoted 2 lines

Which has a fix:

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary

Yes, but I don't _think_ I missed a pull request. That said, I see:

I don't think there ever was a pull request with that fix. Cc-ing Stefano Babic

Fix is in u-boot-imx. I will still merge a couple of patches and then I send a PR to Tom.

Thanks,
Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================