U-Boot v2015.01-rc3 released
Hey all,
I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.
So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.
As always, if anything else is broken please speak up.
Thanks all!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141208/438574c6/attachment.pgp>
Dear Tom,
Quoted 3 lines · In message <20141208214410.GJ20704@bill-the-cat> you wrote:
I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.
Tarball is on the FTP server.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Artificial Intelligence is the study of how to make real computers act like the ones in movies.
Quoted 10 lines · Tom Rini
Hey all,
I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.
So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.
As always, if anything else is broken please speak up.
On "mx53loco_defconfig" I'm getting:
drivers/built-in.o: In function `reset_sata':/var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/scratch/u-boot/drivers/block/dwc_ahsata.c:611:
undefined reference to `disable_sata_clock' /var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
BFD (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)
2.24.0.20140829 Linaro 2014.09 assertion fail /cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/src/binutils-linaro-2.24.0-2014.09/bfd/elf32-arm.c:7710 /var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
error: required section '.rel.plt' not found in the linker script /var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
final link failed: Invalid operation
Makefile:1052: recipe for target 'u-boot' failed
make: *** [u-boot] Error 1
Which has a fix:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=summary
Looks like we
sata: fix reset_sata for dwc_ahsata
Regards,
Signature · 2 lines
Robert Nelson http://www.rcn-ee.com/
Quoted 28 lines · Robert Nelson
Quoted 10 lines · Tom Rini
Hey all,
I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.
So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.
As always, if anything else is broken please speak up.
On "
mx53loco_defconfig" I'm getting:
drivers/built-in.o: In function `reset_sata':/var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/scratch/u-boot/drivers/block/dwc_ahsata.c:611:
undefined reference to `disable_sata_clock'/var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
BFD (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09)
2.24.0.20140829 Linaro 2014.09 assertion fail /cbuild/slaves/oorts/crosstool-ng/builds/arm-linux-gnueabihf-linux/.build/src/binutils-linaro-2.24.0-2014.09/bfd/elf32-arm.c:7710/var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
error: required section '.rel.plt' not found in the linker script/var/lib/jenkins/jobs/github_Bootloader-Builder/workspace/dl/gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux/bin/arm-linux-gnueabihf-ld.bfd:
final link failed: Invalid operation
Makefile:1052: recipe for target 'u-boot' failed
make: *** [u-boot] Error 1
Quoted 3 lines
Which has a fix:
(oh gmail and the evil cltr-enter shortcut...)
This commit:
http://git.denx.de/?p=u-boot/u-boot-imx.git;a=commit;h=dd1c8f1b5fb63a682fce62a53464108d8587b0a2
Regards,
Signature · 2 lines
Robert Nelson http://www.rcn-ee.com/
Quoted 13 lines · Robert Nelson
Quoted 10 lines · Tom Rini
Hey all,
I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.
So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.
As always, if anything else is broken please speak up.
On "
mx53loco_defconfig" I'm getting:
[snip]
Quoted 3 lines
Which has a fix:
Yes, but I don't _think_ I missed a pull request. That said, I see:
$ ./tools/buildman/buildman -b master 'blackfin|microblaze|m68k|nds32|x86|aarch64|sandbox|mips|avr32|arm|powerpc' -svel
boards.cfg is up to date. Nothing to do.
Summary of 1 commit for 1172 boards (6 threads, 1 job per thread)
01: Prepare v2015.01-rc3
blackfin: + ip04
arm: + mx53loco m53evk maxbcm ima3-mx53 odroid db-mv784mp-gp
powerpc: + ocotea taishan
+(ocotea) powerpc-linux-ld.bfd: section .bootpg loaded at [fffff000,fffff24f] overlaps section .u_boot_list loaded at [ffffe928,fffff17f]
+(ocotea) powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xfffff000 adjusted to 0xfffff180
+(ocotea,ip04,taishan) make[1]: *** [u-boot] Error 1
+(ip04) bfin-elf-ld.bfd: u-boot section `.bss' will not fit in region `ram'
+(ip04) bfin-elf-ld.bfd: region `ram' overflowed by 1308 bytes
+(m53evk,ima3-mx53,mx53loco) disable_sata_clock();
+(m53evk,odroid,ima3-mx53,mx53loco) ^
+(m53evk,ima3-mx53,mx53loco) drivers/built-in.o: In function `reset_sata':
+(m53evk,ima3-mx53,mx53loco) build/../drivers/block/dwc_ahsata.c:611: undefined reference to `disable_sata_clock'
+(m53evk,ima3-mx53,mx53loco) arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils for Ubuntu) 2.22.52.20120713 assertion fail ../../bfd/elf32-arm.c:7677
+(m53evk,ima3-mx53,mx53loco) arm-linux-gnueabi-ld.bfd: BFD (GNU Binutils for Ubuntu) 2.22.52.20120713 assertion fail ../../bfd/elf32-arm.c:14086
+(m53evk,ima3-mx53,mx53loco) make[1]: *** [u-boot] Error 139
+(maxbcm) u16 reg;
+(maxbcm) ^
+(maxbcm) u16 devadr = CONFIG_PHY_BASE_ADDR;
+(maxbcm) Didn't find the file 'board/maxbcm/binary.0' in 'build' which is mandatory to generate the image
+(maxbcm,db-mv784mp-gp) This file generally contains the DDR3 training code, and should be extracted from an existing bootable
+(maxbcm,db-mv784mp-gp) image for your board. See 'kwbimage -x' to extract it from an existing image.
+(maxbcm,db-mv784mp-gp) Could not create image
+(maxbcm,db-mv784mp-gp) make[1]: *** [u-boot.kwb] Error 1
+(odroid) addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+(odroid) ^
+(odroid) ../board/samsung/common/board.c:94:2: note: containing loop
+(odroid) for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+(odroid) ../board/samsung/common/board.c:106:2: note: containing loop
+(taishan) powerpc-linux-ld.bfd: section .bootpg loaded at [fffff000,fffff24f] overlaps section .u_boot_list loaded@[ffffebd8,fffff547]
+(taishan) powerpc-linux-ld.bfd: u-boot: section .bootpg lma 0xfffff000 adjusted to 0xfffff548
+(db-mv784mp-gp) Didn't find the file 'board/Marvell/db-mv784mp-gp/binary.0' in 'build' which is mandatory to generate the image
w+(m53evk,ima3-mx53,mx53loco) ../drivers/block/dwc_ahsata.c: In function 'reset_sata':
w+(m53evk,ima3-mx53,mx53loco) ../drivers/block/dwc_ahsata.c:611:2: warning: implicit declaration of function 'disable_sata_clock' [-Wimplicit-function-declaration]
w+(maxbcm) ../board/maxbcm/maxbcm.c: In function 'reset_phy':
w+(maxbcm) ../board/maxbcm/maxbcm.c:68:6: warning: unused variable 'reg' [-Wunused-variable]
w+(maxbcm) ../board/maxbcm/maxbcm.c:66:6: warning: unused variable 'devadr' [-Wunused-variable]
w+(odroid) ../board/samsung/common/board.c: In function 'dram_init':
w+(odroid) ../board/samsung/common/board.c:95:32: warning: iteration 4u invokes undefined behavior [-Waggressive-loop-optimizations]
w+(odroid) ../board/samsung/common/board.c: In function 'dram_init_banksize':
w+(odroid) ../board/samsung/common/board.c:107:32: warning: iteration 4u invokes undefined behavior [-Waggressive-loop-optimizations]Which to me are all top priority to get sorted out for -rc4.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141208/6a245162/attachment.pgp>
Quoted 13 lines · Tom Rini
Quoted 12 lines · Robert Nelson
Quoted 10 lines · Tom Rini
Hey all,
I've pushed v2015.01-rc3 out to the repository and tarballs should exist soon.
So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.
As always, if anything else is broken please speak up.
Quoted 8 lines
Quoted 1 line
On "
mx53loco_defconfig" I'm getting:[snip]
Quoted 3 lines
Which has a fix:
Yes, but I don't _think_ I missed a pull request. That said, I see:
I don't think there ever was a pull request with that fix. Cc-ing Stefano Babic
Signature · 2 lines
Regards, Nikita Kiryanov
Quoted 21 lines · Nikita Kiryanov
Quoted 18 lines · Tom Rini
Quoted 14 lines · Robert Nelson
Quoted 11 lines · Tom Rini
Hey all,
I've pushed v2015.01-rc3 out to the repository and tarballs should exist
soon.So, we're nearing the end now, relatively speaking, so things should start getting quieter. I'd like everyone to please build their respective areas and make sure everything is building right.
As always, if anything else is broken please speak up.
On "
mx53loco_defconfig" I'm getting:[snip]
Quoted 2 lines
Which has a fix:
Quoted 8 lines
Quoted 4 lines
Yes, but I don't _think_ I missed a pull request. That said, I see:
I don't think there ever was a pull request with that fix. Cc-ing Stefano Babic
Fix is in u-boot-imx. I will still merge a couple of patches and then I send a PR to Tom.
Thanks,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================