Skip to contentSkip to conversation

ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192

PATCH Superseded Evgeni Dobrev 4 participants 8 messages Dec 15, 2014 – Dec 21, 2014 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192

This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor.

---
 arch/arm/boot/dts/kirkwood-6192.dtsi |    2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/kirkwood-6192.dtsi +2 -0
index dd81508..bed2dec 100644
@@ -66,6 +66,8 @@
 			interrupts = <21>;
 			clocks = <&gate_clk 14>, <&gate_clk 15>;
 			clock-names = "0", "1";
+                        phys = <&sata_phy0>, <&sata_phy1>;
+                        phy-names = "port0", "port1";
 			status = "disabled";
 		};
 
Signature · 1 line
1.7.10.4
Acked-by on v1 1/2
#1 lore raw
Quoted 3 lines · Evgeni Dobrev

This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor.

This should also go to stable.

Andrew

Quoted 25 lines
---
 arch/arm/boot/dts/kirkwood-6192.dtsi |    2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/kirkwood-6192.dtsi +2 -0
index dd81508..bed2dec 100644
@@ -66,6 +66,8 @@
 			interrupts = <21>;
 			clocks = <&gate_clk 14>, <&gate_clk 15>;
 			clock-names = "0", "1";
+                        phys = <&sata_phy0>, <&sata_phy1>;
+                        phy-names = "port0", "port1";
 			status = "disabled";
 		};
 
Signature · 7 lines
1.7.10.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#2 lore raw
In reply to Evgeni Dobrev

Hello.

Quoted 1 line · Evgeni Dobrev

This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor.

Please wrap the change log likes at 80 characters or less.

Quoted 10 lines
---
  arch/arm/boot/dts/kirkwood-6192.dtsi |    2 ++
  1 file changed, 2 insertions(+)
arch/arm/boot/dts/kirkwood-6192.dtsi +0 -0
index dd81508..bed2dec 100644

arch/arm/boot/dts/kirkwood-6192.dtsi line 70

Quoted 5 lines
arch/arm/boot/dts/kirkwood-6192.dtsi +2 -0
@@ -66,6 +66,8 @@
  			interrupts = <21>;
  			clocks = <&gate_clk 14>, <&gate_clk 15>;
  			clock-names = "0", "1";
+                        phys = <&sata_phy0>, <&sata_phy1>;
+                        phy-names = "port0", "port1";

Please indent with tabs, not spaces.

[...]

WBR, Sergei

#3 lore raw
In reply to Evgeni Dobrev

Dear Evgeni Dobrev,

Quoted 1 line · Evgeni Dobrev

This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor.

Commit log text should be wrapped to some reasonable length.

arch/arm/boot/dts/kirkwood-6192.dtsi line 70

Quoted 5 lines
arch/arm/boot/dts/kirkwood-6192.dtsi +2 -0
 			interrupts = <21>;
 			clocks = <&gate_clk 14>, <&gate_clk 15>;
 			clock-names = "0", "1";
+                        phys = <&sata_phy0>, <&sata_phy1>;
+                        phy-names = "port0", "port1";

You should use tabs and not spaces for indentation in Device Tree files.

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
#4 lore raw

Hello Thomas,

Quoted 7 lines · Thomas Petazzoni

Dear Evgeni Dobrev,

Quoted 1 line · Evgeni Dobrev

This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor.

Commit log text should be wrapped to some reasonable length.

I will fix this.

Quoted 8 lines

arch/arm/boot/dts/kirkwood-6192.dtsi line 70

Quoted 6 lines
arch/arm/boot/dts/kirkwood-6192.dtsi +2 -0
 			interrupts = <21>;
 			clocks = <&gate_clk 14>, <&gate_clk 15>;
 			clock-names = "0", "1";
+                        phys = <&sata_phy0>, <&sata_phy1>;
+                        phy-names = "port0", "port1";

You should use tabs and not spaces for indentation in Device Tree files.

I will resubmit. Thank you for your review.

Quoted 9 lines

Thanks!

Thomas

Signature · 4 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--

evgeni

#5 lore raw

v2 cover ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192

In reply to Evgeni Dobrev

v2: indent with tabs only
wrap change log at 80 chars

Evgeni Dobrev (1):
enable phy driver for SATA controller on 88f6192

 arch/arm/boot/dts/kirkwood-6192.dtsi |    2 ++
 1 file changed, 2 insertions(+)
Signature · 1 line
1.7.10.4
#6 lore raw

PATCH v2 1/1 ARM: dts: kirkwood: enable phy driver for SATA controller on 88f6192

In reply to Evgeni Dobrev

This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor.

---
 arch/arm/boot/dts/kirkwood-6192.dtsi |    2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/kirkwood-6192.dtsi +2 -0
index dd81508..9e6e9e2 100644
@@ -66,6 +66,8 @@
 			interrupts = <21>;
 			clocks = <&gate_clk 14>, <&gate_clk 15>;
 			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
 			status = "disabled";
 		};
 
Signature · 1 line
1.7.10.4
#7 lore raw
Quoted 4 lines · Evgeni Dobrev

This patch enables the phy drivers for the SATA controller on Marvell's 88f6192. Without them it is not possible to use SATA drives attached to this processor.

Hi Evgeni

Added to mvebu/dt

Andrew

Quoted 25 lines
---
 arch/arm/boot/dts/kirkwood-6192.dtsi |    2 ++
 1 file changed, 2 insertions(+)
arch/arm/boot/dts/kirkwood-6192.dtsi +2 -0
index dd81508..9e6e9e2 100644
@@ -66,6 +66,8 @@
 			interrupts = <21>;
 			clocks = <&gate_clk 14>, <&gate_clk 15>;
 			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
 			status = "disabled";
 		};
 
Signature · 7 lines
1.7.10.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel