Skip to contentSkip to conversation

v3.19: Nokia N900 (qemu) - omap_aes error

DISCUSSION Pali Rohár 1 participant 4 messages Jan 31, 2015 – Feb 19, 2015

lore
Share & tools
lore
#0 lore raw

Hello,

when I enable problematic omap_aes.ko driver (also in DT) for Nokia N900 machine in qemu (it emulates OMAP GP device, not HS) I get this error message in dmesg at modprobe time:

[   37.660339] ------------[ cut here ]------------
[   37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach-
omap2/omap_hwmod.c:2182 _idle+0x28/0x64()
[   37.668762] omap_hwmod: aes: idle state can only be entered 
from enabled state
[   37.672271] Modules linked in: omap_aes(+)
[   37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted 3.19.0-
rc5+ #299
[   37.679534] Hardware name: Nokia RX-51 board
[   37.683227] [<c0012678>] (unwind_backtrace) from [<c0010d44>] 
(show_stack+0x10/0x14)
[   37.686920] [<c0010d44>] (show_stack) from [<c0032194>] 
(warn_slowpath_common+0x84/0xac)
[   37.690765] [<c0032194>] (warn_slowpath_common) from 
[<c003223c>] (warn_slowpath_fmt+0x2c/0x3c)
[   37.694366] [<c003223c>] (warn_slowpath_fmt) from [<c0020cb0>] 
(_idle+0x28/0x64)
[   37.698791] [<c0020cb0>] (_idle) from [<c0021078>] 
(omap_hwmod_idle+0x30/0x78)
[   37.702636] [<c0021078>] (omap_hwmod_idle) from [<c00222c4>] 
(omap_device_idle+0x48/0x6c)
[   37.707153] [<c00222c4>] (omap_device_idle) from [<c0022304>] 
(_od_runtime_suspend+0x1c/0x24)
[   37.710723] [<c0022304>] (_od_runtime_suspend) from 
[<c0269680>] (__rpm_callback+0x8c/0xdc)
[   37.714385] [<c0269680>] (__rpm_callback) from [<c0269740>] 
(rpm_callback+0x70/0x88)
[   37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>] 
(rpm_suspend+0x2e8/0x5a4)
[   37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>] 
(__pm_runtime_idle+0x58/0x9c)
[   37.725402] [<c026a6ec>] (__pm_runtime_idle) from [<bf00129c>] 
(omap_aes_probe+0x15c/0x448 [omap_aes])
[   37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from 
[<c0263d78>] (platform_drv_probe+0x48/0x90)
[   37.740936] [<c0263d78>] (platform_drv_probe) from 
[<c02624ec>] (really_probe+0xac/0x1e0)
[   37.745025] [<c02624ec>] (really_probe) from [<c0262718>] 
(driver_probe_device+0x30/0x48)
[   37.749847] [<c0262718>] (driver_probe_device) from 
[<c0262790>] (__driver_attach+0x60/0x84)
[   37.753601] [<c0262790>] (__driver_attach) from [<c0261070>] 
(bus_for_each_dev+0x50/0x84)
[   37.758422] [<c0261070>] (bus_for_each_dev) from [<c0261e20>] 
(bus_add_driver+0xac/0x1bc)
[   37.762207] [<c0261e20>] (bus_add_driver) from [<c02630c8>] 
(driver_register+0x9c/0xe0)
[   37.765899] [<c02630c8>] (driver_register) from [<c0008798>] 
(do_one_initcall+0x100/0x1b0)
[   37.769653] [<c0008798>] (do_one_initcall) from [<c0085ca4>] 
(do_init_module+0x34/0x158)
[   37.773590] [<c0085ca4>] (do_init_module) from [<c00868d8>] 
(SyS_init_module+0x54/0x64)
[   37.777252] [<c00868d8>] (SyS_init_module) from [<c000dbe0>] 
(ret_fast_syscall+0x0/0x30)
[   37.780975] ---[ end trace 86c3e025b92e700d ]---
[   37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev: 0.0
[   37.789794] of_dma_request_slave_channel: dma-names property 
of node '/ocp/aes@480c5000' missing or empty
[   37.797668] omap-aes 480c5000.aes: Unable to request in DMA 
channel
[   37.801391]    omap_aes_dma_init: error: -12

Error is not fatal, kernel does not crash and qemu emulation working fine. But error is there.

I'm sure that qemu does not support omap aes hw emulation and so I except error message about missing hw part (or something else). But not above unwind_backtrace error message.

Any idea why it happens? It is probably not related to AES but to DMA. It is for OMAP GP device (but emulated), so can TI comment this problem (as this is not HS under NDA)?

Signature · 2 lines
Pali Rohár
[email protected]
#1 lore raw
Quoted 72 lines · On Saturday 31 January 2015 16:29:36 Pali Rohár wrote:

Hello,

when I enable problematic omap_aes.ko driver (also in DT) for Nokia N900 machine in qemu (it emulates OMAP GP device, not HS) I get this error message in dmesg at modprobe time:

[   37.660339] ------------[ cut here ]------------
[   37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach-
omap2/omap_hwmod.c:2182 _idle+0x28/0x64()
[   37.668762] omap_hwmod: aes: idle state can only be entered
from enabled state
[   37.672271] Modules linked in: omap_aes(+)
[   37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted
3.19.0- rc5+ #299
[   37.679534] Hardware name: Nokia RX-51 board
[   37.683227] [<c0012678>] (unwind_backtrace) from
[<c0010d44>] (show_stack+0x10/0x14)
[   37.686920] [<c0010d44>] (show_stack) from [<c0032194>]
(warn_slowpath_common+0x84/0xac)
[   37.690765] [<c0032194>] (warn_slowpath_common) from
[<c003223c>] (warn_slowpath_fmt+0x2c/0x3c)
[   37.694366] [<c003223c>] (warn_slowpath_fmt) from
[<c0020cb0>] (_idle+0x28/0x64)
[   37.698791] [<c0020cb0>] (_idle) from [<c0021078>]
(omap_hwmod_idle+0x30/0x78)
[   37.702636] [<c0021078>] (omap_hwmod_idle) from
[<c00222c4>] (omap_device_idle+0x48/0x6c)
[   37.707153] [<c00222c4>] (omap_device_idle) from
[<c0022304>] (_od_runtime_suspend+0x1c/0x24)
[   37.710723] [<c0022304>] (_od_runtime_suspend) from
[<c0269680>] (__rpm_callback+0x8c/0xdc)
[   37.714385] [<c0269680>] (__rpm_callback) from [<c0269740>]
(rpm_callback+0x70/0x88)
[   37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>]
(rpm_suspend+0x2e8/0x5a4)
[   37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>]
(__pm_runtime_idle+0x58/0x9c)
[   37.725402] [<c026a6ec>] (__pm_runtime_idle) from
[<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes])
[   37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from
[<c0263d78>] (platform_drv_probe+0x48/0x90)
[   37.740936] [<c0263d78>] (platform_drv_probe) from
[<c02624ec>] (really_probe+0xac/0x1e0)
[   37.745025] [<c02624ec>] (really_probe) from [<c0262718>]
(driver_probe_device+0x30/0x48)
[   37.749847] [<c0262718>] (driver_probe_device) from
[<c0262790>] (__driver_attach+0x60/0x84)
[   37.753601] [<c0262790>] (__driver_attach) from
[<c0261070>] (bus_for_each_dev+0x50/0x84)
[   37.758422] [<c0261070>] (bus_for_each_dev) from
[<c0261e20>] (bus_add_driver+0xac/0x1bc)
[   37.762207] [<c0261e20>] (bus_add_driver) from [<c02630c8>]
(driver_register+0x9c/0xe0)
[   37.765899] [<c02630c8>] (driver_register) from
[<c0008798>] (do_one_initcall+0x100/0x1b0)
[   37.769653] [<c0008798>] (do_one_initcall) from
[<c0085ca4>] (do_init_module+0x34/0x158)
[   37.773590] [<c0085ca4>] (do_init_module) from [<c00868d8>]
(SyS_init_module+0x54/0x64)
[   37.777252] [<c00868d8>] (SyS_init_module) from
[<c000dbe0>] (ret_fast_syscall+0x0/0x30)
[   37.780975] ---[ end trace 86c3e025b92e700d ]---
[   37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev:
0.0 [   37.789794] of_dma_request_slave_channel: dma-names
property of node '/ocp/aes@480c5000' missing or empty
[   37.797668] omap-aes 480c5000.aes: Unable to request in DMA
channel
[   37.801391]    omap_aes_dma_init: error: -12

Error is not fatal, kernel does not crash and qemu emulation working fine. But error is there.

Quoted 7 lines

I'm sure that qemu does not support omap aes hw emulation and so I except error message about missing hw part (or something else). But not above unwind_backtrace error message.

Any idea why it happens? It is probably not related to AES but to DMA. It is for OMAP GP device (but emulated), so can TI comment this problem (as this is not HS under NDA)?

Hello,

what does that error line means?

[   37.668762] omap_hwmod: aes: idle state can only be entered 

from enabled state

Is not it bug in omap_hwmod.c code?

Signature · 2 lines
Pali Rohár
[email protected]
#2 lore raw
Quoted 82 lines · On Monday 09 February 2015 12:25:00 Pali Rohár wrote:
Quoted 72 lines · On Saturday 31 January 2015 16:29:36 Pali Rohár wrote:

Hello,

when I enable problematic omap_aes.ko driver (also in DT) for Nokia N900 machine in qemu (it emulates OMAP GP device, not HS) I get this error message in dmesg at modprobe time:

[   37.660339] ------------[ cut here ]------------
[   37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach-
omap2/omap_hwmod.c:2182 _idle+0x28/0x64()
[   37.668762] omap_hwmod: aes: idle state can only be
entered from enabled state
[   37.672271] Modules linked in: omap_aes(+)
[   37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted
3.19.0- rc5+ #299
[   37.679534] Hardware name: Nokia RX-51 board
[   37.683227] [<c0012678>] (unwind_backtrace) from
[<c0010d44>] (show_stack+0x10/0x14)
[   37.686920] [<c0010d44>] (show_stack) from [<c0032194>]
(warn_slowpath_common+0x84/0xac)
[   37.690765] [<c0032194>] (warn_slowpath_common) from
[<c003223c>] (warn_slowpath_fmt+0x2c/0x3c)
[   37.694366] [<c003223c>] (warn_slowpath_fmt) from
[<c0020cb0>] (_idle+0x28/0x64)
[   37.698791] [<c0020cb0>] (_idle) from [<c0021078>]
(omap_hwmod_idle+0x30/0x78)
[   37.702636] [<c0021078>] (omap_hwmod_idle) from
[<c00222c4>] (omap_device_idle+0x48/0x6c)
[   37.707153] [<c00222c4>] (omap_device_idle) from
[<c0022304>] (_od_runtime_suspend+0x1c/0x24)
[   37.710723] [<c0022304>] (_od_runtime_suspend) from
[<c0269680>] (__rpm_callback+0x8c/0xdc)
[   37.714385] [<c0269680>] (__rpm_callback) from
[<c0269740>] (rpm_callback+0x70/0x88)
[   37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>]
(rpm_suspend+0x2e8/0x5a4)
[   37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>]
(__pm_runtime_idle+0x58/0x9c)
[   37.725402] [<c026a6ec>] (__pm_runtime_idle) from
[<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes])
[   37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from
[<c0263d78>] (platform_drv_probe+0x48/0x90)
[   37.740936] [<c0263d78>] (platform_drv_probe) from
[<c02624ec>] (really_probe+0xac/0x1e0)
[   37.745025] [<c02624ec>] (really_probe) from [<c0262718>]
(driver_probe_device+0x30/0x48)
[   37.749847] [<c0262718>] (driver_probe_device) from
[<c0262790>] (__driver_attach+0x60/0x84)
[   37.753601] [<c0262790>] (__driver_attach) from
[<c0261070>] (bus_for_each_dev+0x50/0x84)
[   37.758422] [<c0261070>] (bus_for_each_dev) from
[<c0261e20>] (bus_add_driver+0xac/0x1bc)
[   37.762207] [<c0261e20>] (bus_add_driver) from
[<c02630c8>] (driver_register+0x9c/0xe0)
[   37.765899] [<c02630c8>] (driver_register) from
[<c0008798>] (do_one_initcall+0x100/0x1b0)
[   37.769653] [<c0008798>] (do_one_initcall) from
[<c0085ca4>] (do_init_module+0x34/0x158)
[   37.773590] [<c0085ca4>] (do_init_module) from
[<c00868d8>] (SyS_init_module+0x54/0x64)
[   37.777252] [<c00868d8>] (SyS_init_module) from
[<c000dbe0>] (ret_fast_syscall+0x0/0x30)
[   37.780975] ---[ end trace 86c3e025b92e700d ]---
[   37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev:
0.0 [   37.789794] of_dma_request_slave_channel: dma-names
property of node '/ocp/aes@480c5000' missing or empty
[   37.797668] omap-aes 480c5000.aes: Unable to request in
DMA channel
[   37.801391]    omap_aes_dma_init: error: -12

Error is not fatal, kernel does not crash and qemu emulation working fine. But error is there.

Quoted 8 lines

I'm sure that qemu does not support omap aes hw emulation and so I except error message about missing hw part (or something else). But not above unwind_backtrace error message.

Any idea why it happens? It is probably not related to AES but to DMA. It is for OMAP GP device (but emulated), so can TI comment this problem (as this is not HS under NDA)?

Quoted 8 lines

Hello,

what does that error line means?

[   37.668762] omap_hwmod: aes: idle state can only be entered

from enabled state

Is not it bug in omap_hwmod.c code?

In qemu dmesg log I see this debug line:

[    0.297851] omap_hwmod: aes: cannot be enabled for reset (3)

So aes is in disabled state.

Should not omap-aes driver check for aes state if is enabled?

Signature · 2 lines
Pali Rohár
[email protected]
#3 lore raw
Quoted 94 lines · On Wednesday 18 February 2015 22:36:41 Pali Rohár wrote:
Quoted 84 lines · On Monday 09 February 2015 12:25:00 Pali Rohár wrote:
Quoted 78 lines · On Saturday 31 January 2015 16:29:36 Pali Rohár wrote:

Hello,

when I enable problematic omap_aes.ko driver (also in DT) for Nokia N900 machine in qemu (it emulates OMAP GP device, not HS) I get this error message in dmesg at modprobe time:

[   37.660339] ------------[ cut here ]------------
[   37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach-
omap2/omap_hwmod.c:2182 _idle+0x28/0x64()
[   37.668762] omap_hwmod: aes: idle state can only be
entered from enabled state
[   37.672271] Modules linked in: omap_aes(+)
[   37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted
3.19.0- rc5+ #299
[   37.679534] Hardware name: Nokia RX-51 board
[   37.683227] [<c0012678>] (unwind_backtrace) from
[<c0010d44>] (show_stack+0x10/0x14)
[   37.686920] [<c0010d44>] (show_stack) from [<c0032194>]
(warn_slowpath_common+0x84/0xac)
[   37.690765] [<c0032194>] (warn_slowpath_common) from
[<c003223c>] (warn_slowpath_fmt+0x2c/0x3c)
[   37.694366] [<c003223c>] (warn_slowpath_fmt) from
[<c0020cb0>] (_idle+0x28/0x64)
[   37.698791] [<c0020cb0>] (_idle) from [<c0021078>]
(omap_hwmod_idle+0x30/0x78)
[   37.702636] [<c0021078>] (omap_hwmod_idle) from
[<c00222c4>] (omap_device_idle+0x48/0x6c)
[   37.707153] [<c00222c4>] (omap_device_idle) from
[<c0022304>] (_od_runtime_suspend+0x1c/0x24)
[   37.710723] [<c0022304>] (_od_runtime_suspend) from
[<c0269680>] (__rpm_callback+0x8c/0xdc)
[   37.714385] [<c0269680>] (__rpm_callback) from
[<c0269740>] (rpm_callback+0x70/0x88)
[   37.717987] [<c0269740>] (rpm_callback) from
[<c0269f74>] (rpm_suspend+0x2e8/0x5a4)
[   37.721710] [<c0269f74>] (rpm_suspend) from
[<c026a6ec>] (__pm_runtime_idle+0x58/0x9c)
[   37.725402] [<c026a6ec>] (__pm_runtime_idle) from
[<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes])
[   37.733489] [<bf00129c>] (omap_aes_probe [omap_aes])
from [<c0263d78>] (platform_drv_probe+0x48/0x90)
[   37.740936] [<c0263d78>] (platform_drv_probe) from
[<c02624ec>] (really_probe+0xac/0x1e0)
[   37.745025] [<c02624ec>] (really_probe) from
[<c0262718>] (driver_probe_device+0x30/0x48)
[   37.749847] [<c0262718>] (driver_probe_device) from
[<c0262790>] (__driver_attach+0x60/0x84)
[   37.753601] [<c0262790>] (__driver_attach) from
[<c0261070>] (bus_for_each_dev+0x50/0x84)
[   37.758422] [<c0261070>] (bus_for_each_dev) from
[<c0261e20>] (bus_add_driver+0xac/0x1bc)
[   37.762207] [<c0261e20>] (bus_add_driver) from
[<c02630c8>] (driver_register+0x9c/0xe0)
[   37.765899] [<c02630c8>] (driver_register) from
[<c0008798>] (do_one_initcall+0x100/0x1b0)
[   37.769653] [<c0008798>] (do_one_initcall) from
[<c0085ca4>] (do_init_module+0x34/0x158)
[   37.773590] [<c0085ca4>] (do_init_module) from
[<c00868d8>] (SyS_init_module+0x54/0x64)
[   37.777252] [<c00868d8>] (SyS_init_module) from
[<c000dbe0>] (ret_fast_syscall+0x0/0x30)
[   37.780975] ---[ end trace 86c3e025b92e700d ]---
[   37.784667] omap-aes 480c5000.aes: OMAP AES hw accel

rev: 0.0 [ 37.789794] of_dma_request_slave_channel:
dma-names property of node '/ocp/aes@480c5000' missing or
empty [ 37.797668] omap-aes 480c5000.aes: Unable to
request in DMA channel

[   37.801391]    omap_aes_dma_init: error: -12

Error is not fatal, kernel does not crash and qemu emulation working fine. But error is there.

I'm sure that qemu does not support omap aes hw emulation and so I except error message about missing hw part (or something else). But not above unwind_backtrace error message.

Quoted 4 lines

Any idea why it happens? It is probably not related to AES but to DMA. It is for OMAP GP device (but emulated), so can TI comment this problem (as this is not HS under NDA)?

Quoted 8 lines

Hello,

what does that error line means?

[   37.668762] omap_hwmod: aes: idle state can only be

entered from enabled state

Is not it bug in omap_hwmod.c code?

Quoted 8 lines

In qemu dmesg log I see this debug line:

[    0.297851] omap_hwmod: aes: cannot be enabled for reset

(3)

So aes is in disabled state.

Should not omap-aes driver check for aes state if is enabled?

Above dmesg error should be fixed by my patch sent to ML:

ARM: OMAP2+: Return correct error values from device and hwmod

Signature · 2 lines
Pali Rohár
[email protected]