v3.19: Nokia N900 (qemu) - omap_aes error
Hello,
when I enable problematic omap_aes.ko driver (also in DT) for Nokia N900 machine in qemu (it emulates OMAP GP device, not HS) I get this error message in dmesg at modprobe time:
[ 37.660339] ------------[ cut here ]------------ [ 37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach- omap2/omap_hwmod.c:2182 _idle+0x28/0x64() [ 37.668762] omap_hwmod: aes: idle state can only be entered from enabled state [ 37.672271] Modules linked in: omap_aes(+) [ 37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted 3.19.0- rc5+ #299 [ 37.679534] Hardware name: Nokia RX-51 board [ 37.683227] [<c0012678>] (unwind_backtrace) from [<c0010d44>] (show_stack+0x10/0x14) [ 37.686920] [<c0010d44>] (show_stack) from [<c0032194>] (warn_slowpath_common+0x84/0xac) [ 37.690765] [<c0032194>] (warn_slowpath_common) from [<c003223c>] (warn_slowpath_fmt+0x2c/0x3c) [ 37.694366] [<c003223c>] (warn_slowpath_fmt) from [<c0020cb0>] (_idle+0x28/0x64) [ 37.698791] [<c0020cb0>] (_idle) from [<c0021078>] (omap_hwmod_idle+0x30/0x78) [ 37.702636] [<c0021078>] (omap_hwmod_idle) from [<c00222c4>] (omap_device_idle+0x48/0x6c) [ 37.707153] [<c00222c4>] (omap_device_idle) from [<c0022304>] (_od_runtime_suspend+0x1c/0x24) [ 37.710723] [<c0022304>] (_od_runtime_suspend) from [<c0269680>] (__rpm_callback+0x8c/0xdc) [ 37.714385] [<c0269680>] (__rpm_callback) from [<c0269740>] (rpm_callback+0x70/0x88) [ 37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>] (rpm_suspend+0x2e8/0x5a4) [ 37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>] (__pm_runtime_idle+0x58/0x9c) [ 37.725402] [<c026a6ec>] (__pm_runtime_idle) from [<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes]) [ 37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from [<c0263d78>] (platform_drv_probe+0x48/0x90) [ 37.740936] [<c0263d78>] (platform_drv_probe) from [<c02624ec>] (really_probe+0xac/0x1e0) [ 37.745025] [<c02624ec>] (really_probe) from [<c0262718>] (driver_probe_device+0x30/0x48) [ 37.749847] [<c0262718>] (driver_probe_device) from [<c0262790>] (__driver_attach+0x60/0x84) [ 37.753601] [<c0262790>] (__driver_attach) from [<c0261070>] (bus_for_each_dev+0x50/0x84) [ 37.758422] [<c0261070>] (bus_for_each_dev) from [<c0261e20>] (bus_add_driver+0xac/0x1bc) [ 37.762207] [<c0261e20>] (bus_add_driver) from [<c02630c8>] (driver_register+0x9c/0xe0) [ 37.765899] [<c02630c8>] (driver_register) from [<c0008798>] (do_one_initcall+0x100/0x1b0) [ 37.769653] [<c0008798>] (do_one_initcall) from [<c0085ca4>] (do_init_module+0x34/0x158) [ 37.773590] [<c0085ca4>] (do_init_module) from [<c00868d8>] (SyS_init_module+0x54/0x64) [ 37.777252] [<c00868d8>] (SyS_init_module) from [<c000dbe0>] (ret_fast_syscall+0x0/0x30) [ 37.780975] ---[ end trace 86c3e025b92e700d ]--- [ 37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev: 0.0 [ 37.789794] of_dma_request_slave_channel: dma-names property of node '/ocp/aes@480c5000' missing or empty [ 37.797668] omap-aes 480c5000.aes: Unable to request in DMA channel [ 37.801391] omap_aes_dma_init: error: -12
Error is not fatal, kernel does not crash and qemu emulation working fine. But error is there.
I'm sure that qemu does not support omap aes hw emulation and so I except error message about missing hw part (or something else). But not above unwind_backtrace error message.
Any idea why it happens? It is probably not related to AES but to DMA. It is for OMAP GP device (but emulated), so can TI comment this problem (as this is not HS under NDA)?
Signature · 2 lines
Pali Rohár [email protected]
Quoted 72 lines · On Saturday 31 January 2015 16:29:36 Pali Rohár wrote:
Hello,
when I enable problematic omap_aes.ko driver (also in DT) for Nokia N900 machine in qemu (it emulates OMAP GP device, not HS) I get this error message in dmesg at modprobe time:
[ 37.660339] ------------[ cut here ]------------ [ 37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach- omap2/omap_hwmod.c:2182 _idle+0x28/0x64() [ 37.668762] omap_hwmod: aes: idle state can only be entered from enabled state [ 37.672271] Modules linked in: omap_aes(+) [ 37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted 3.19.0- rc5+ #299 [ 37.679534] Hardware name: Nokia RX-51 board [ 37.683227] [<c0012678>] (unwind_backtrace) from [<c0010d44>] (show_stack+0x10/0x14) [ 37.686920] [<c0010d44>] (show_stack) from [<c0032194>] (warn_slowpath_common+0x84/0xac) [ 37.690765] [<c0032194>] (warn_slowpath_common) from [<c003223c>] (warn_slowpath_fmt+0x2c/0x3c) [ 37.694366] [<c003223c>] (warn_slowpath_fmt) from [<c0020cb0>] (_idle+0x28/0x64) [ 37.698791] [<c0020cb0>] (_idle) from [<c0021078>] (omap_hwmod_idle+0x30/0x78) [ 37.702636] [<c0021078>] (omap_hwmod_idle) from [<c00222c4>] (omap_device_idle+0x48/0x6c) [ 37.707153] [<c00222c4>] (omap_device_idle) from [<c0022304>] (_od_runtime_suspend+0x1c/0x24) [ 37.710723] [<c0022304>] (_od_runtime_suspend) from [<c0269680>] (__rpm_callback+0x8c/0xdc) [ 37.714385] [<c0269680>] (__rpm_callback) from [<c0269740>] (rpm_callback+0x70/0x88) [ 37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>] (rpm_suspend+0x2e8/0x5a4) [ 37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>] (__pm_runtime_idle+0x58/0x9c) [ 37.725402] [<c026a6ec>] (__pm_runtime_idle) from [<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes]) [ 37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from [<c0263d78>] (platform_drv_probe+0x48/0x90) [ 37.740936] [<c0263d78>] (platform_drv_probe) from [<c02624ec>] (really_probe+0xac/0x1e0) [ 37.745025] [<c02624ec>] (really_probe) from [<c0262718>] (driver_probe_device+0x30/0x48) [ 37.749847] [<c0262718>] (driver_probe_device) from [<c0262790>] (__driver_attach+0x60/0x84) [ 37.753601] [<c0262790>] (__driver_attach) from [<c0261070>] (bus_for_each_dev+0x50/0x84) [ 37.758422] [<c0261070>] (bus_for_each_dev) from [<c0261e20>] (bus_add_driver+0xac/0x1bc) [ 37.762207] [<c0261e20>] (bus_add_driver) from [<c02630c8>] (driver_register+0x9c/0xe0) [ 37.765899] [<c02630c8>] (driver_register) from [<c0008798>] (do_one_initcall+0x100/0x1b0) [ 37.769653] [<c0008798>] (do_one_initcall) from [<c0085ca4>] (do_init_module+0x34/0x158) [ 37.773590] [<c0085ca4>] (do_init_module) from [<c00868d8>] (SyS_init_module+0x54/0x64) [ 37.777252] [<c00868d8>] (SyS_init_module) from [<c000dbe0>] (ret_fast_syscall+0x0/0x30) [ 37.780975] ---[ end trace 86c3e025b92e700d ]--- [ 37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev: 0.0 [ 37.789794] of_dma_request_slave_channel: dma-names property of node '/ocp/aes@480c5000' missing or empty [ 37.797668] omap-aes 480c5000.aes: Unable to request in DMA channel [ 37.801391] omap_aes_dma_init: error: -12Error is not fatal, kernel does not crash and qemu emulation working fine. But error is there.
Quoted 7 lines
I'm sure that qemu does not support omap aes hw emulation and so I except error message about missing hw part (or something else). But not above
unwind_backtraceerror message.Any idea why it happens? It is probably not related to AES but to DMA. It is for OMAP GP device (but emulated), so can TI comment this problem (as this is not HS under NDA)?
Hello,
what does that error line means?
[ 37.668762] omap_hwmod: aes: idle state can only be entered
from enabled state
Is not it bug in omap_hwmod.c code?
Signature · 2 lines
Pali Rohár [email protected]
Quoted 82 lines · On Monday 09 February 2015 12:25:00 Pali Rohár wrote:
Quoted 72 lines · On Saturday 31 January 2015 16:29:36 Pali Rohár wrote:
Hello,
when I enable problematic omap_aes.ko driver (also in DT) for Nokia N900 machine in qemu (it emulates OMAP GP device, not HS) I get this error message in dmesg at modprobe time:
[ 37.660339] ------------[ cut here ]------------ [ 37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach- omap2/omap_hwmod.c:2182 _idle+0x28/0x64() [ 37.668762] omap_hwmod: aes: idle state can only be entered from enabled state [ 37.672271] Modules linked in: omap_aes(+) [ 37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted 3.19.0- rc5+ #299 [ 37.679534] Hardware name: Nokia RX-51 board [ 37.683227] [<c0012678>] (unwind_backtrace) from [<c0010d44>] (show_stack+0x10/0x14) [ 37.686920] [<c0010d44>] (show_stack) from [<c0032194>] (warn_slowpath_common+0x84/0xac) [ 37.690765] [<c0032194>] (warn_slowpath_common) from [<c003223c>] (warn_slowpath_fmt+0x2c/0x3c) [ 37.694366] [<c003223c>] (warn_slowpath_fmt) from [<c0020cb0>] (_idle+0x28/0x64) [ 37.698791] [<c0020cb0>] (_idle) from [<c0021078>] (omap_hwmod_idle+0x30/0x78) [ 37.702636] [<c0021078>] (omap_hwmod_idle) from [<c00222c4>] (omap_device_idle+0x48/0x6c) [ 37.707153] [<c00222c4>] (omap_device_idle) from [<c0022304>] (_od_runtime_suspend+0x1c/0x24) [ 37.710723] [<c0022304>] (_od_runtime_suspend) from [<c0269680>] (__rpm_callback+0x8c/0xdc) [ 37.714385] [<c0269680>] (__rpm_callback) from [<c0269740>] (rpm_callback+0x70/0x88) [ 37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>] (rpm_suspend+0x2e8/0x5a4) [ 37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>] (__pm_runtime_idle+0x58/0x9c) [ 37.725402] [<c026a6ec>] (__pm_runtime_idle) from [<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes]) [ 37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from [<c0263d78>] (platform_drv_probe+0x48/0x90) [ 37.740936] [<c0263d78>] (platform_drv_probe) from [<c02624ec>] (really_probe+0xac/0x1e0) [ 37.745025] [<c02624ec>] (really_probe) from [<c0262718>] (driver_probe_device+0x30/0x48) [ 37.749847] [<c0262718>] (driver_probe_device) from [<c0262790>] (__driver_attach+0x60/0x84) [ 37.753601] [<c0262790>] (__driver_attach) from [<c0261070>] (bus_for_each_dev+0x50/0x84) [ 37.758422] [<c0261070>] (bus_for_each_dev) from [<c0261e20>] (bus_add_driver+0xac/0x1bc) [ 37.762207] [<c0261e20>] (bus_add_driver) from [<c02630c8>] (driver_register+0x9c/0xe0) [ 37.765899] [<c02630c8>] (driver_register) from [<c0008798>] (do_one_initcall+0x100/0x1b0) [ 37.769653] [<c0008798>] (do_one_initcall) from [<c0085ca4>] (do_init_module+0x34/0x158) [ 37.773590] [<c0085ca4>] (do_init_module) from [<c00868d8>] (SyS_init_module+0x54/0x64) [ 37.777252] [<c00868d8>] (SyS_init_module) from [<c000dbe0>] (ret_fast_syscall+0x0/0x30) [ 37.780975] ---[ end trace 86c3e025b92e700d ]--- [ 37.784667] omap-aes 480c5000.aes: OMAP AES hw accel rev: 0.0 [ 37.789794] of_dma_request_slave_channel: dma-names property of node '/ocp/aes@480c5000' missing or empty [ 37.797668] omap-aes 480c5000.aes: Unable to request in DMA channel [ 37.801391] omap_aes_dma_init: error: -12Error is not fatal, kernel does not crash and qemu emulation working fine. But error is there.
Quoted 8 lines
I'm sure that qemu does not support omap aes hw emulation and so I except error message about missing hw part (or something else). But not above
unwind_backtraceerror message.Any idea why it happens? It is probably not related to AES but to DMA. It is for OMAP GP device (but emulated), so can TI comment this problem (as this is not HS under NDA)?
Quoted 8 lines
Hello,
what does that error line means?
[ 37.668762] omap_hwmod: aes: idle state can only be enteredfrom enabled state
Is not it bug in
omap_hwmod.ccode?
In qemu dmesg log I see this debug line:
[ 0.297851] omap_hwmod: aes: cannot be enabled for reset (3)
So aes is in disabled state.
Should not omap-aes driver check for aes state if is enabled?
Signature · 2 lines
Pali Rohár [email protected]
Quoted 94 lines · On Wednesday 18 February 2015 22:36:41 Pali Rohár wrote:
Quoted 84 lines · On Monday 09 February 2015 12:25:00 Pali Rohár wrote:
Quoted 78 lines · On Saturday 31 January 2015 16:29:36 Pali Rohár wrote:
Hello,
when I enable problematic omap_aes.ko driver (also in DT) for Nokia N900 machine in qemu (it emulates OMAP GP device, not HS) I get this error message in dmesg at modprobe time:
[ 37.660339] ------------[ cut here ]------------ [ 37.663940] WARNING: CPU: 0 PID: 173 at arch/arm/mach- omap2/omap_hwmod.c:2182 _idle+0x28/0x64() [ 37.668762] omap_hwmod: aes: idle state can only be entered from enabled state [ 37.672271] Modules linked in: omap_aes(+) [ 37.675933] CPU: 0 PID: 173 Comm: modprobe Not tainted 3.19.0- rc5+ #299 [ 37.679534] Hardware name: Nokia RX-51 board [ 37.683227] [<c0012678>] (unwind_backtrace) from [<c0010d44>] (show_stack+0x10/0x14) [ 37.686920] [<c0010d44>] (show_stack) from [<c0032194>] (warn_slowpath_common+0x84/0xac) [ 37.690765] [<c0032194>] (warn_slowpath_common) from [<c003223c>] (warn_slowpath_fmt+0x2c/0x3c) [ 37.694366] [<c003223c>] (warn_slowpath_fmt) from [<c0020cb0>] (_idle+0x28/0x64) [ 37.698791] [<c0020cb0>] (_idle) from [<c0021078>] (omap_hwmod_idle+0x30/0x78) [ 37.702636] [<c0021078>] (omap_hwmod_idle) from [<c00222c4>] (omap_device_idle+0x48/0x6c) [ 37.707153] [<c00222c4>] (omap_device_idle) from [<c0022304>] (_od_runtime_suspend+0x1c/0x24) [ 37.710723] [<c0022304>] (_od_runtime_suspend) from [<c0269680>] (__rpm_callback+0x8c/0xdc) [ 37.714385] [<c0269680>] (__rpm_callback) from [<c0269740>] (rpm_callback+0x70/0x88) [ 37.717987] [<c0269740>] (rpm_callback) from [<c0269f74>] (rpm_suspend+0x2e8/0x5a4) [ 37.721710] [<c0269f74>] (rpm_suspend) from [<c026a6ec>] (__pm_runtime_idle+0x58/0x9c) [ 37.725402] [<c026a6ec>] (__pm_runtime_idle) from [<bf00129c>] (omap_aes_probe+0x15c/0x448 [omap_aes]) [ 37.733489] [<bf00129c>] (omap_aes_probe [omap_aes]) from [<c0263d78>] (platform_drv_probe+0x48/0x90) [ 37.740936] [<c0263d78>] (platform_drv_probe) from [<c02624ec>] (really_probe+0xac/0x1e0) [ 37.745025] [<c02624ec>] (really_probe) from [<c0262718>] (driver_probe_device+0x30/0x48) [ 37.749847] [<c0262718>] (driver_probe_device) from [<c0262790>] (__driver_attach+0x60/0x84) [ 37.753601] [<c0262790>] (__driver_attach) from [<c0261070>] (bus_for_each_dev+0x50/0x84) [ 37.758422] [<c0261070>] (bus_for_each_dev) from [<c0261e20>] (bus_add_driver+0xac/0x1bc) [ 37.762207] [<c0261e20>] (bus_add_driver) from [<c02630c8>] (driver_register+0x9c/0xe0) [ 37.765899] [<c02630c8>] (driver_register) from [<c0008798>] (do_one_initcall+0x100/0x1b0) [ 37.769653] [<c0008798>] (do_one_initcall) from [<c0085ca4>] (do_init_module+0x34/0x158) [ 37.773590] [<c0085ca4>] (do_init_module) from [<c00868d8>] (SyS_init_module+0x54/0x64) [ 37.777252] [<c00868d8>] (SyS_init_module) from [<c000dbe0>] (ret_fast_syscall+0x0/0x30) [ 37.780975] ---[ end trace 86c3e025b92e700d ]--- [ 37.784667] omap-aes 480c5000.aes: OMAP AES hw accelrev: 0.0 [ 37.789794]
of_dma_request_slave_channel:
dma-names property of node '/ocp/aes@480c5000' missing or
empty [ 37.797668] omap-aes 480c5000.aes: Unable to
request in DMA channel[ 37.801391] omap_aes_dma_init: error: -12Error is not fatal, kernel does not crash and qemu emulation working fine. But error is there.
I'm sure that qemu does not support omap aes hw emulation and so I except error message about missing hw part (or something else). But not above
unwind_backtraceerror message.Quoted 4 lines
Any idea why it happens? It is probably not related to AES but to DMA. It is for OMAP GP device (but emulated), so can TI comment this problem (as this is not HS under NDA)?
Quoted 8 lines
Hello,
what does that error line means?
[ 37.668762] omap_hwmod: aes: idle state can only beentered from enabled state
Is not it bug in
omap_hwmod.ccode?
Quoted 8 lines
In qemu dmesg log I see this debug line:
[ 0.297851] omap_hwmod: aes: cannot be enabled for reset(3)
So aes is in disabled state.
Should not omap-aes driver check for aes state if is enabled?
Above dmesg error should be fixed by my patch sent to ML:
ARM: OMAP2+: Return correct error values from device and hwmod
Signature · 2 lines
Pali Rohár [email protected]