socfpga: socdk and socrates share SPI flash config, move it to shared place
Both Socrates and SocDK share same QSPI and SPI flash configuration. Move the common configuration into common place.
arch/arm/dts/socfpga_cyclone5.dtsi +26 -0
@@ -37,4 +37,30 @@ cpu1-start-addr = <0xffd080c4>; }; }; + + aliases { + spi0 = "/spi at ff705000"; /* QSPI */ + spi1 = "/spi at fff00000"; + spi2 = "/spi at fff01000"; + }; +}; + +&qspi { + status = "okay"; + + flash0: n25q00 at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <0>; /* chip select */ + spi-max-frequency = <50000000>; + m25p,fast-read; + page-size = <256>; + block-size = <16>; /* 2^16, 64KB */ + read-delay = <4>; /* delay value in read data capture register */ + tshsl-ns = <50>; + tsd2d-ns = <50>; + tchsh-ns = <4>; + tslch-ns = <4>; + }; };
arch/arm/dts/socfpga_cyclone5_socrates.dts +0 -25
@@ -14,12 +14,6 @@ bootargs = "console=ttyS0,115200"; }; - aliases { - spi0 = "/spi at ff705000"; /* QSPI */ - spi1 = "/spi at fff00000"; - spi2 = "/spi at fff01000"; - }; - memory { name = "memory"; device_type = "memory";
@@ -44,22 +38,3 @@ status = "okay"; }; -&qspi { - status = "okay"; - - flash0: n25q00 at 0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q00"; - reg = <0>; /* chip select */ - spi-max-frequency = <50000000>; - m25p,fast-read; - page-size = <256>; - block-size = <16>; /* 2^16, 64KB */ - read-delay = <4>; /* delay value in read data capture register */ - tshsl-ns = <50>; - tsd2d-ns = <50>; - tchsh-ns = <4>; - tslch-ns = <4>; - }; -};
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 4 lines · Pavel Machek
Both Socrates and SocDK share same QSPI and SPI flash configuration. Move the common configuration into common place.
Signed-off-by Pavel Machek <[email protected]>
Is my understanding correct that now all SoCFPGA CV boards will be forced to have this SPI flash ? I believe this is incorrect.
Best regards,
Marek Vasut
Quoted 8 lines · Marek Vasut
Quoted 4 lines · Pavel Machek
Both Socrates and SocDK share same QSPI and SPI flash configuration. Move the common configuration into common place.
Signed-off-by Pavel Machek <[email protected]>Is my understanding correct that now all SoCFPGA CV boards will be forced to have this SPI flash ? I believe this is incorrect.
Yes. Defining such a SPI flash is board specific and shouldn't be moved to the common dtsi file.
Thanks,
Stefan
PATCH 1/1 socfpga: implement socdk SPI flash config in dts
SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it.
arch/arm/dts/socfpga_cyclone5_socdk.dts +24 -0
@@ -25,6 +25,10 @@ * to be added to the gmac1 device tree blob. */ ethernet0 = &gmac1; + + spi0 = "/spi at ff705000"; /* QSPI */ + spi1 = "/spi at fff00000"; + spi2 = "/spi at fff01000"; }; regulator_3_3v: 3-3-v-regulator {
@@ -77,3 +81,23 @@ &usb1 { status = "okay"; }; + +&qspi { + status = "okay"; + + flash0: n25q00 at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <0>; /* chip select */ + spi-max-frequency = <50000000>; + m25p,fast-read; + page-size = <256>; + block-size = <16>; /* 2^16, 64KB */ + read-delay = <4>; /* delay value in read data capture register */ + tshsl-ns = <50>; + tsd2d-ns = <50>; + tchsh-ns = <4>; + tslch-ns = <4>; + }; +};
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Marek Vasut
AppliedPATCH 1/1 socfpga: implement socdk SPI flash config in dts
Quoted 4 lines · Pavel Machek
SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it.
Signed-off-by Pavel Machek <[email protected]>
Applied, thanks.
Can you please cook one for Arria V too while at it, so we're consistent ?
Best regards,
Marek Vasut
PATCH 1/1 socfpga: implement socdk SPI flash config in dts
Quoted 9 lines · Marek Vasut
Quoted 4 lines · Pavel Machek
SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it.
Signed-off-by Pavel Machek <[email protected]>Applied, thanks.
Can you please cook one for Arria V too while at it, so we're consistent ?
Ok (if you are sure it has same hardware?). Should something like socfpga_devel_board.dtsi be created so we don't have to copy same piece of dts 3 times?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 1/1 socfpga: implement socdk SPI flash config in dts
Quoted 5 lines · Pavel Machek
Quoted 4 lines · Marek Vasut
Quoted 3 lines · Pavel Machek
SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it.
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
Signed-off-by Pavel Machek <[email protected]>Applied, thanks.
Can you please cook one for Arria V too while at it, so we're consistent ?
Ok (if you are sure it has same hardware?).
Yeah, from this point of view, CV and AV are almost identical. Basically, it's the FPGA which differs, AV is closer to stratix in my opinion.
Quoted 3 lines
Should something like
socfpga_devel_board.dtsibe created so we don't have to copy same piece of dts 3 times?
No, this is board specific. I have a feeling we'll have to just deal with three copies in this case.
Best regards,
Marek Vasut
PATCH 1/1 socfpga: implement arria V socdk SPI flash config in dts
Arria V SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it.
arch/arm/dts/socfpga_arria5_socdk.dts +24 -0
@@ -25,6 +25,10 @@ * to be added to the gmac1 device tree blob. */ ethernet0 = &gmac1; + + spi0 = "/spi at ff705000"; /* QSPI */ + spi1 = "/spi at fff00000"; + spi2 = "/spi at fff01000"; }; regulator_3_3v: 3-3-v-regulator {
@@ -72,3 +76,23 @@ &usb1 { status = "okay"; }; + +&qspi { + status = "okay"; + + flash0: n25q00 at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <0>; /* chip select */ + spi-max-frequency = <50000000>; + m25p,fast-read; + page-size = <256>; + block-size = <16>; /* 2^16, 64KB */ + read-delay = <4>; /* delay value in read data capture register */ + tshsl-ns = <50>; + tsd2d-ns = <50>; + tchsh-ns = <4>; + tslch-ns = <4>; + }; +};
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 1/1 socfpga: implement arria V socdk SPI flash config in dts
arch/arm/dts/socfpga_arria5_socdk.dts
Quoted 9 lines · Pavel Machek
Arria V SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it.
Signed-off-by Pavel Machek <[email protected]>(quoted diff) +0
-0
b/arch/arm/dts/socfpga_arria5_socdk.dtsindex 4e529a1..1b86897 100644arch/arm/dts/socfpga_arria5_socdk.dts +0
-0
I was just curious about this, but why are your patches missing diffstat ?
btw. I presume that there is no opposition to this patch, in my opinion it's perfectly OK.
Best regards,
Marek Vasut
PATCH 1/1 socfpga: implement arria V socdk SPI flash config in dts
Quoted 4 lines · Marek Vasut
Quoted 3 lines · Pavel Machek
Arria V SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it.
Quoted 8 lines
arch/arm/dts/socfpga_arria5_socdk.dts
Quoted 6 lines
Signed-off-by Pavel Machek <[email protected]>(quoted diff) +0
-0
b/arch/arm/dts/socfpga_arria5_socdk.dtsindex 4e529a1..1b86897 100644arch/arm/dts/socfpga_arria5_socdk.dts +0
-0I was just curious about this, but why are your patches missing diffstat ?
diffstat was never required part of a patch.
Quoted 2 lines
btw. I presume that there is no opposition to this patch, in my opinion it's perfectly OK.
So this means "thank you, applied"?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 1/1 socfpga: implement arria V socdk SPI flash config in dts
Quoted 15 lines · Pavel Machek
Quoted 6 lines · Marek Vasut
Quoted 5 lines · Pavel Machek
Arria V SocDK has same QSPI and SPI flash configuration as Socrates. Add support for it.
Signed-off-by Pavel Machek <[email protected]>Quoted 7 lines
arch/arm/dts/socfpga_arria5_socdk.dts
Quoted 4 lines
(quoted diff) +0
-0
b/arch/arm/dts/socfpga_arria5_socdk.dtsindex 4e529a1..1b86897 100644arch/arm/dts/socfpga_arria5_socdk.dts +0
-0I was just curious about this, but why are your patches missing diffstat ?
Quoted 1 line
diffstat was never required part of a patch.
Would be nice to have though.
Quoted 4 lines
Quoted 2 lines
btw. I presume that there is no opposition to this patch, in my opinion it's perfectly OK.
So this means "thank you, applied"?
No, that's "applied, thanks" ;-)
Best regards,
Marek Vasut