Skip to contentSkip to conversation

x86: Correct Minnowboard instructions to use the right descriptor

PATCH New Simon Glass 2 participants 5 messages Apr 25, 2015 – Apr 29, 2015

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 x86: Correct Minnowboard instructions to use the right descriptor

The descriptor provided with the FSP does not seem to work. Update the instructions to use the descriptor from the original Intel firmware.

---

 doc/README.x86 | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
doc/README.x86 +20 -3
index 0355d1c..fe31f3d 100644
@@ -127,15 +127,32 @@ board/intel/minnowmax/fsp.bin
 Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
 directory: board/intel/minnowmax/vga.bin
 
-You still need two more binary blobs. These come from the sample SPI image
-provided in the FSP (SPI.bin at the time of writing).
+You still need two more binary blobs. The first comes from the original
+firmware image available from:
+
+http://firmware.intel.com/sites/default/files/2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
+
+Unzip it:
+
+   $ unzip 2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
 
 Use ifdtool in the U-Boot tools directory to extract the images from that
 file, for example:
 
+   $ ./tools/ifdtool -x MNW2MAX1.X64.0073.R02.1409160934.bin
+
+This will provide the descriptor file - copy this into the correct place:
+
+   $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
+
+Then do the same with the sample SPI image provided in the FSP (SPI.bin at
+the time of writing) to obtain the last image. Note that this will also
+produce a flash descriptor file, but it does not seem to work, probably
+because it is not designed for the Minnowmax. That is why you need to get
+the flash descriptor from the original firmware as above.
+
    $ ./tools/ifdtool -x BayleyBay/SPI.bin
    $ cp flashregion_2_intel_me.bin board/intel/minnowmax/me.bin
-   $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
 
 Now you can build U-Boot and obtain u-boot.rom
 
Signature · 1 line
2.2.0.rc0.207.ga3a616c
#1 lore raw

PATCH 1/1 x86: Correct Minnowboard instructions to use the right descriptor

Quoted 38 lines · Simon Glass

The descriptor provided with the FSP does not seem to work. Update the instructions to use the descriptor from the original Intel firmware.

---

 doc/README.x86 | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
doc/README.x86 +15 -2
index 0355d1c..fe31f3d 100644
@@ -127,15 +127,32 @@ board/intel/minnowmax/fsp.bin
 Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
 directory: board/intel/minnowmax/vga.bin
 
-You still need two more binary blobs. These come from the sample SPI image
-provided in the FSP (SPI.bin at the time of writing).
+You still need two more binary blobs. The first comes from the original
+firmware image available from:
+
+http://firmware.intel.com/sites/default/files/2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
+
+Unzip it:
+
+   $ unzip 2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
 
 Use ifdtool in the U-Boot tools directory to extract the images from that
 file, for example:
 
+   $ ./tools/ifdtool -x MNW2MAX1.X64.0073.R02.1409160934.bin
+
+This will provide the descriptor file - copy this into the correct place:
+
+   $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
+
+Then do the same with the sample SPI image provided in the FSP (SPI.bin at

doc/README.x86 board/intel/minnowmax/fsp.bin · line 157

Quoted 10 lines
doc/README.x86 +5 -1
+the time of writing) to obtain the last image. Note that this will also
+produce a flash descriptor file, but it does not seem to work, probably
+because it is not designed for the Minnowmax. That is why you need to get
+the flash descriptor from the original firmware as above.
+
    $ ./tools/ifdtool -x BayleyBay/SPI.bin
    $ cp flashregion_2_intel_me.bin board/intel/minnowmax/me.bin
-   $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
 
 Now you can build U-Boot and obtain u-boot.rom

+ Then you ... to flash u-boot.rom

? :) Thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150425/c54e476b/attachment.sig>
#2 lore raw

PATCH 1/1 x86: Correct Minnowboard instructions to use the right descriptor

Hi Tom,

Quoted 48 lines · Tom Rini
Quoted 47 lines · Simon Glass

The descriptor provided with the FSP does not seem to work. Update the instructions to use the descriptor from the original Intel firmware.

---

 doc/README.x86 | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
doc/README.x86 +20 -3
index 0355d1c..fe31f3d 100644
@@ -127,15 +127,32 @@ board/intel/minnowmax/fsp.bin
 Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
 directory: board/intel/minnowmax/vga.bin
 
-You still need two more binary blobs. These come from the sample SPI image
-provided in the FSP (SPI.bin at the time of writing).
+You still need two more binary blobs. The first comes from the original
+firmware image available from:
+
+http://firmware.intel.com/sites/default/files/2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
+
+Unzip it:
+
+   $ unzip 2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
 
 Use ifdtool in the U-Boot tools directory to extract the images from that
 file, for example:
 
+   $ ./tools/ifdtool -x MNW2MAX1.X64.0073.R02.1409160934.bin
+
+This will provide the descriptor file - copy this into the correct place:
+
+   $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
+
+Then do the same with the sample SPI image provided in the FSP (SPI.bin at
+the time of writing) to obtain the last image. Note that this will also
+produce a flash descriptor file, but it does not seem to work, probably
+because it is not designed for the Minnowmax. That is why you need to get
+the flash descriptor from the original firmware as above.
+
    $ ./tools/ifdtool -x BayleyBay/SPI.bin
    $ cp flashregion_2_intel_me.bin board/intel/minnowmax/me.bin
-   $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
 
Quoted 5 lines

doc/README.x86 board/intel/minnowmax/fsp.bin · line 157

Quoted 1 line
doc/README.x86 +0 -0
 Now you can build U-Boot and obtain u-boot.rom

+ Then you ... to flash u-boot.rom

? :) Thanks!

There are some notes at the end about using a SPI emulator - em100. Should I add something for another SPI tool also? What type of SPI programmer do you have?

Regards,
Simon

#3 lore raw

PATCH 1/1 x86: Correct Minnowboard instructions to use the right descriptor

Quoted 51 lines · Simon Glass

Hi Tom,

Quoted 48 lines · Tom Rini
Quoted 47 lines · Simon Glass

The descriptor provided with the FSP does not seem to work. Update the instructions to use the descriptor from the original Intel firmware.

---

 doc/README.x86 | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)
doc/README.x86 +20 -3
index 0355d1c..fe31f3d 100644
@@ -127,15 +127,32 @@ board/intel/minnowmax/fsp.bin
 Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
 directory: board/intel/minnowmax/vga.bin
 
-You still need two more binary blobs. These come from the sample SPI image
-provided in the FSP (SPI.bin at the time of writing).
+You still need two more binary blobs. The first comes from the original
+firmware image available from:
+
+http://firmware.intel.com/sites/default/files/2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
+
+Unzip it:
+
+   $ unzip 2014-WW42.4-MinnowBoardMax.73-64-bit.bin_Release.zip
 
 Use ifdtool in the U-Boot tools directory to extract the images from that
 file, for example:
 
+   $ ./tools/ifdtool -x MNW2MAX1.X64.0073.R02.1409160934.bin
+
+This will provide the descriptor file - copy this into the correct place:
+
+   $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
+
+Then do the same with the sample SPI image provided in the FSP (SPI.bin at
+the time of writing) to obtain the last image. Note that this will also
+produce a flash descriptor file, but it does not seem to work, probably
+because it is not designed for the Minnowmax. That is why you need to get
+the flash descriptor from the original firmware as above.
+
    $ ./tools/ifdtool -x BayleyBay/SPI.bin
    $ cp flashregion_2_intel_me.bin board/intel/minnowmax/me.bin
-   $ cp flashregion_0_flashdescriptor.bin board/intel/minnowmax/descriptor.bin
 
Quoted 7 lines
Quoted 5 lines

doc/README.x86 board/intel/minnowmax/fsp.bin · line 157

Quoted 1 line
doc/README.x86 +0 -0
 Now you can build U-Boot and obtain u-boot.rom

+ Then you ... to flash u-boot.rom

? :) Thanks!

There are some notes at the end about using a SPI emulator - em100.

I guess it reads well enough, reading it all again.

Quoted 2 lines

Should I add something for another SPI tool also? What type of SPI programmer do you have?

Ahem, I need to work on something there :)

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150428/d497d430/attachment.sig>
#4 lore raw

PATCH 1/1 x86: Correct Minnowboard instructions to use the right descriptor

In reply to Simon Glass
Quoted 8 lines · Simon Glass

The descriptor provided with the FSP does not seem to work. Update the instructions to use the descriptor from the original Intel firmware.

---

 doc/README.x86 | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

Applied to u-boot-x86.