Skip to contentSkip to conversation

Specify Australian DFS region as DFS-ETSI

PATCH In review Dmitry Ivanov 4 participants 9 messages May 5, 2015 – May 15, 2015

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Specify Australian DFS region as DFS-ETSI

Currently, DFS region for Australia is not specified. This prevents starting AP with AU country code on DFS-affected channel in 5 GHz band with latest cfg80211 and hostapd because there is an explicit check for such condition.

This patch specifies DFS region for Australia as DFS-ETSI. Alternatively, DFS-FCC can be used.

Source: AS/NZS 4268 (not avilable online).

---
 db.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
db.txt +1 -1
index ad2acf5..057c8e6 100644
@@ -85,7 +85,7 @@ country AT: DFS-ETSI
 	# 60 gHz band channels 1-4, ref: Etsi En 302 567
 	(57000 - 66000 @ 2160), (40)
 
-country AU:
+country AU: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
 	(5170 - 5250 @ 80), (17), AUTO-BW
 	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
Signature · 7 lines
2.1.4


_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb
#1 lore raw
Quoted 3 lines · Dmitry Ivanov

Currently, DFS region for Australia is not specified. This prevents starting AP with AU country code on DFS-affected channel in 5 GHz band with latest cfg80211 and hostapd because there is an explicit check for such condition.

This patch specifies DFS region for Australia as DFS-ETSI. Alternatively, DFS-FCC can be used.

I would have used DFS-FCC here unless you have a clear indication of DFS-ETSI being closer to requirements. In addition, there should be a
Signed-off-by: tag in the commit log as described in the CONTRIBUTING file.

Signature · 6 lines
Jouni Malinen                                            PGP id EFC895FA

_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb
#2 lore raw
Quoted 9 lines · Jouni Malinen
Quoted 3 lines · Dmitry Ivanov

Currently, DFS region for Australia is not specified. This prevents starting AP with AU country code on DFS-affected channel in 5 GHz band with latest cfg80211 and hostapd because there is an explicit check for such condition.

This patch specifies DFS region for Australia as DFS-ETSI. Alternatively, DFS-FCC can be used.

I would have used DFS-FCC here unless you have a clear indication of DFS-ETSI being closer to requirements. In addition, there should be a
Signed-off-by: tag in the commit log as described in the CONTRIBUTING file.

From what I can gather from
http://www.comlaw.gov.au/Details/F2014L01253
the details are hidden in the standard "AS/NZS 4268:2012". The scope here:
http://shop.standards.co.nz/catalog/4268:2012%28AS|NZS%29/scope?
shows the existence of an appendix "B" titled

"DYNAMIC FREQUENCY SELECTION (DFS) AND TRANSMIT POWER CONTROL (TPC)
REQUIREMENTS FOR RADIO LOCAL AREA NETWORK (RLAN) TRANSMITTERS OPERATING IN 5250 TO 5350 MHz OR 5470 TO 5725 MHz"

But I'm afraid you'll have to buy the standard to get the full details...

Given hysterical raisins, and the general tendency to reference ETSI standards and ERC decisions, I'd say that DFS-ETSI is more likely. Why would they use FCC rules?

But it should probably be kept aligned with the NZ entry, which currently is DFS-FCC. Don't know the source of that, though. Could very well be wrong... Ref the "EN 301 893 V1.7.1" alternative given
here: https://gazette.govt.nz/notice/id/2015-go694

Bjørn

_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb

#3 lore raw
Quoted 24 lines · Bjørn Mork
Quoted 9 lines · Jouni Malinen
Quoted 3 lines · Dmitry Ivanov

Currently, DFS region for Australia is not specified. This prevents starting AP with AU country code on DFS-affected channel in 5 GHz band with latest cfg80211 and hostapd because there is an explicit check for such condition.

This patch specifies DFS region for Australia as DFS-ETSI. Alternatively, DFS-FCC can be used.

I would have used DFS-FCC here unless you have a clear indication of DFS-ETSI being closer to requirements. In addition, there should be a
Signed-off-by: tag in the commit log as described in the CONTRIBUTING file.

From what I can gather from
http://www.comlaw.gov.au/Details/F2014L01253
the details are hidden in the standard "AS/NZS 4268:2012". The scope here:
http://shop.standards.co.nz/catalog/4268:2012%28AS|NZS%29/scope?
shows the existence of an appendix "B" titled

"DYNAMIC FREQUENCY SELECTION (DFS) AND TRANSMIT POWER CONTROL (TPC)
REQUIREMENTS FOR RADIO LOCAL AREA NETWORK (RLAN) TRANSMITTERS OPERATING IN 5250 TO 5350 MHz OR 5470 TO 5725 MHz"

But I'm afraid you'll have to buy the standard to get the full details...

Quoted 8 lines

Given hysterical raisins, and the general tendency to reference ETSI standards and ERC decisions, I'd say that DFS-ETSI is more likely. Why would they use FCC rules?

But it should probably be kept aligned with the NZ entry, which currently is DFS-FCC. Don't know the source of that, though. Could very well be wrong... Ref the "EN 301 893 V1.7.1" alternative given
here: https://gazette.govt.nz/notice/id/2015-go694

That's the most official-looking (free) source of information I could trun up as well.

Dmitry, you site AS/NZS 4268 as your source - do you have access to this, and can you confirm that the requirements are closest to DFS-ETSI? It would be great if someone else with access to the document could ack this as well, since at first blush this appears to be in contradiction to Peter's email.

I agree that it doesn't seem to make any sense for Australia and New Zealand to be different here. So if Australia is specified to use DFS-ETSI I think New Zealand should be changed to use it as well.

Thanks,
Seth

_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb

#4 lore raw

Hi!

I only can access an electronic copy of a previous version of AS/NZS 4268 issued in 2008. Yes, there is an Appendix B which states: use European standard, or _alternatively_ FCC rules.
It is unlikely that this clause has changed in 2012 so that ETSI is not allowed anymore.

Quoted 6 lines · Seth Forshee

Dmitry, you site AS/NZS 4268 as your source - do you have access to this, and can you confirm that the requirements are closest to DFS-ETSI? It would be great if someone else with access to the document could ack this as well, since at first blush this appears to be in contradiction to Peter's email.

Quoted 6 lines

I agree that it doesn't seem to make any sense for Australia and New Zealand to be different here. So if Australia is specified to use DFS-ETSI I think New Zealand should be changed to use it as well.

Thanks,
Seth

_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb

#5 lore raw
Quoted 7 lines · Dmitrijs Ivanovs

Hi!

I only can access an electronic copy of a previous version of AS/NZS 4268 issued in 2008. Yes, there is an Appendix B which states: use European standard, or _alternatively_ FCC rules.
It is unlikely that this clause has changed in 2012 so that ETSI is not allowed anymore.

Great, thanks. It would be nice to be sure what the most recent version says, but all the unofficial information I found online either agrees with this or else mentions only ETSI. Still, DFS-FCC for New Zealand was added in 2013, but as part of a large group of countries and no reference was given.

Again though it seems that if Austrailia is to be DFS-ETSI then New Zealand should be changed to match as well. Could you send an updated patch which includes that change?

Thanks,
Seth

_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb

#6 lore raw

PATCH 1/1 Change DFS domain to DFS-ETSI for Australia and New Zealand

Change DFS domain to DFS-ETSI for Australia and New Zealand

---
 db.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
db.txt +2 -2
index ad2acf5..1041ffb 100644
@@ -85,7 +85,7 @@ country AT: DFS-ETSI
 	# 60 gHz band channels 1-4, ref: Etsi En 302 567
 	(57000 - 66000 @ 2160), (40)
 
-country AU:
+country AU: DFS-ETSI
 	(2402 - 2482 @ 40), (20)
 	(5170 - 5250 @ 80), (17), AUTO-BW
 	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
@@ -862,7 +862,7 @@ country NP: DFS-JP
 	(5250 - 5330 @ 80), (20), DFS, AUTO-BW
 	(5735 - 5835 @ 80), (20)
 
-country NZ: DFS-FCC
+country NZ: DFS-ETSI
 	(2402 - 2482 @ 40), (30)
 	(5170 - 5250 @ 80), (17), AUTO-BW
 	(5250 - 5330 @ 80), (24), DFS, AUTO-BW
Signature · 7 lines
2.1.4


_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb
#7 lore raw

Re: [wireless-regdb] [PATCH] Change DFS domain to DFS-ETSI for Australia and New Zealand

Quoted 3 lines · Dmitry Ivanov

Change DFS domain to DFS-ETSI for Australia and New Zealand

Thanks Dmitry. I'll let this sit for a few days to see if there's any more feedback.

Seth

_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb

Applied
#8 lore raw

Re: [wireless-regdb] [PATCH] Change DFS domain to DFS-ETSI for Australia and New Zealand

In reply to Dmitry Ivanov
Quoted 3 lines · Dmitry Ivanov

Change DFS domain to DFS-ETSI for Australia and New Zealand

Applied, with the addition the source line from your previous patches to the commit message. Thanks!

Seth

_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb