Specify Australian DFS region as DFS-ETSI
PATCH 1/1 Specify Australian DFS region as DFS-ETSI
Currently, DFS region for Australia is not specified. This prevents starting AP with AU country code on DFS-affected channel in 5 GHz band with latest cfg80211 and hostapd because there is an explicit check for such condition.
This patch specifies DFS region for Australia as DFS-ETSI. Alternatively, DFS-FCC can be used.
Source: AS/NZS 4268 (not avilable online).
--- db.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
db.txt +1 -1
@@ -85,7 +85,7 @@ country AT: DFS-ETSI # 60 gHz band channels 1-4, ref: Etsi En 302 567 (57000 - 66000 @ 2160), (40) -country AU: +country AU: DFS-ETSI (2402 - 2482 @ 40), (20) (5170 - 5250 @ 80), (17), AUTO-BW (5250 - 5330 @ 80), (24), DFS, AUTO-BW
Signature · 7 lines
2.1.4 _______________________________________________ wireless-regdb mailing list [email protected] http://lists.infradead.org/mailman/listinfo/wireless-regdb
Quoted 3 lines · Dmitry Ivanov
Currently, DFS region for Australia is not specified. This prevents starting AP with AU country code on DFS-affected channel in 5 GHz band with latest cfg80211 and hostapd because there is an explicit check for such condition.
This patch specifies DFS region for Australia as DFS-ETSI. Alternatively, DFS-FCC can be used.
I would have used DFS-FCC here unless you have a clear indication of DFS-ETSI being closer to requirements. In addition, there should be a
Signed-off-by: tag in the commit log as described in the CONTRIBUTING file.
Signature · 6 lines
Jouni Malinen PGP id EFC895FA _______________________________________________ wireless-regdb mailing list [email protected] http://lists.infradead.org/mailman/listinfo/wireless-regdb
Quoted 9 lines · Jouni Malinen
Quoted 3 lines · Dmitry Ivanov
Currently, DFS region for Australia is not specified. This prevents starting AP with AU country code on DFS-affected channel in 5 GHz band with latest cfg80211 and hostapd because there is an explicit check for such condition.
This patch specifies DFS region for Australia as DFS-ETSI. Alternatively, DFS-FCC can be used.
I would have used DFS-FCC here unless you have a clear indication of DFS-ETSI being closer to requirements. In addition, there should be a
Signed-off-by: tag in the commit log as described in the CONTRIBUTING file.
From what I can gather from
http://www.comlaw.gov.au/Details/F2014L01253
the details are hidden in the standard "AS/NZS 4268:2012". The scope here:
http://shop.standards.co.nz/catalog/4268:2012%28AS|NZS%29/scope?
shows the existence of an appendix "B" titled
"DYNAMIC FREQUENCY SELECTION (DFS) AND TRANSMIT POWER CONTROL (TPC)
REQUIREMENTS FOR RADIO LOCAL AREA NETWORK (RLAN) TRANSMITTERS OPERATING IN 5250 TO 5350 MHz OR 5470 TO 5725 MHz"
But I'm afraid you'll have to buy the standard to get the full details...
Given hysterical raisins, and the general tendency to reference ETSI standards and ERC decisions, I'd say that DFS-ETSI is more likely. Why would they use FCC rules?
But it should probably be kept aligned with the NZ entry, which currently is DFS-FCC. Don't know the source of that, though. Could very well be wrong... Ref the "EN 301 893 V1.7.1" alternative given
here: https://gazette.govt.nz/notice/id/2015-go694
Bjørn
_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb
Quoted 24 lines · Bjørn Mork
Quoted 9 lines · Jouni Malinen
Quoted 3 lines · Dmitry Ivanov
Currently, DFS region for Australia is not specified. This prevents starting AP with AU country code on DFS-affected channel in 5 GHz band with latest cfg80211 and hostapd because there is an explicit check for such condition.
This patch specifies DFS region for Australia as DFS-ETSI. Alternatively, DFS-FCC can be used.
I would have used DFS-FCC here unless you have a clear indication of DFS-ETSI being closer to requirements. In addition, there should be a
Signed-off-by: tag in the commit log as described in the CONTRIBUTING file.From what I can gather from
http://www.comlaw.gov.au/Details/F2014L01253
the details are hidden in the standard "AS/NZS 4268:2012". The scope here:
http://shop.standards.co.nz/catalog/4268:2012%28AS|NZS%29/scope?
shows the existence of an appendix "B" titled"DYNAMIC FREQUENCY SELECTION (DFS) AND TRANSMIT POWER CONTROL (TPC)
REQUIREMENTS FOR RADIO LOCAL AREA NETWORK (RLAN) TRANSMITTERS OPERATING IN 5250 TO 5350 MHz OR 5470 TO 5725 MHz"But I'm afraid you'll have to buy the standard to get the full details...
Quoted 8 lines
Given hysterical raisins, and the general tendency to reference ETSI standards and ERC decisions, I'd say that DFS-ETSI is more likely. Why would they use FCC rules?
But it should probably be kept aligned with the NZ entry, which currently is DFS-FCC. Don't know the source of that, though. Could very well be wrong... Ref the "EN 301 893 V1.7.1" alternative given
here: https://gazette.govt.nz/notice/id/2015-go694
That's the most official-looking (free) source of information I could trun up as well.
Dmitry, you site AS/NZS 4268 as your source - do you have access to this, and can you confirm that the requirements are closest to DFS-ETSI? It would be great if someone else with access to the document could ack this as well, since at first blush this appears to be in contradiction to Peter's email.
I agree that it doesn't seem to make any sense for Australia and New Zealand to be different here. So if Australia is specified to use DFS-ETSI I think New Zealand should be changed to use it as well.
Thanks,
Seth
_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb
Hi!
I only can access an electronic copy of a previous version of AS/NZS 4268 issued in 2008. Yes, there is an Appendix B which states: use European standard, or _alternatively_ FCC rules.
It is unlikely that this clause has changed in 2012 so that ETSI is not allowed anymore.
Quoted 6 lines · Seth Forshee
Dmitry, you site AS/NZS 4268 as your source - do you have access to this, and can you confirm that the requirements are closest to DFS-ETSI? It would be great if someone else with access to the document could ack this as well, since at first blush this appears to be in contradiction to Peter's email.
Quoted 6 lines
I agree that it doesn't seem to make any sense for Australia and New Zealand to be different here. So if Australia is specified to use DFS-ETSI I think New Zealand should be changed to use it as well.
Thanks,
Seth
_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb
Quoted 7 lines · Dmitrijs Ivanovs
Hi!
I only can access an electronic copy of a previous version of AS/NZS 4268 issued in 2008. Yes, there is an Appendix B which states: use European standard, or _alternatively_ FCC rules.
It is unlikely that this clause has changed in 2012 so that ETSI is not allowed anymore.
Great, thanks. It would be nice to be sure what the most recent version says, but all the unofficial information I found online either agrees with this or else mentions only ETSI. Still, DFS-FCC for New Zealand was added in 2013, but as part of a large group of countries and no reference was given.
Again though it seems that if Austrailia is to be DFS-ETSI then New Zealand should be changed to match as well. Could you send an updated patch which includes that change?
Thanks,
Seth
_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb
PATCH 1/1 Change DFS domain to DFS-ETSI for Australia and New Zealand
Change DFS domain to DFS-ETSI for Australia and New Zealand
--- db.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
db.txt +2 -2
@@ -85,7 +85,7 @@ country AT: DFS-ETSI # 60 gHz band channels 1-4, ref: Etsi En 302 567 (57000 - 66000 @ 2160), (40) -country AU: +country AU: DFS-ETSI (2402 - 2482 @ 40), (20) (5170 - 5250 @ 80), (17), AUTO-BW (5250 - 5330 @ 80), (24), DFS, AUTO-BW
@@ -862,7 +862,7 @@ country NP: DFS-JP (5250 - 5330 @ 80), (20), DFS, AUTO-BW (5735 - 5835 @ 80), (20) -country NZ: DFS-FCC +country NZ: DFS-ETSI (2402 - 2482 @ 40), (30) (5170 - 5250 @ 80), (17), AUTO-BW (5250 - 5330 @ 80), (24), DFS, AUTO-BW
Signature · 7 lines
2.1.4 _______________________________________________ wireless-regdb mailing list [email protected] http://lists.infradead.org/mailman/listinfo/wireless-regdb
Re: [wireless-regdb] [PATCH] Change DFS domain to DFS-ETSI for Australia and New Zealand
Quoted 3 lines · Dmitry Ivanov
Change DFS domain to DFS-ETSI for Australia and New Zealand
Signed-off-by Dmitry Ivanov <[email protected]>
Thanks Dmitry. I'll let this sit for a few days to see if there's any more feedback.
Seth
_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb
Seth Forshee
AppliedRe: [wireless-regdb] [PATCH] Change DFS domain to DFS-ETSI for Australia and New Zealand
In reply to Dmitry IvanovQuoted 3 lines · Dmitry Ivanov
Change DFS domain to DFS-ETSI for Australia and New Zealand
Signed-off-by Dmitry Ivanov <[email protected]>
Applied, with the addition the source line from your previous patches to the commit message. Thanks!
Seth
_______________________________________________
wireless-regdb mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/wireless-regdb