Skip to contentSkip to conversation

ARM: digicolor: misc updates for 4.3

PATCH New Baruch Siach 2 participants 7 messages Jul 6, 2015 – Jul 14, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover ARM: digicolor: misc updates for 4.3

This series contains the following updates for Conexant Digicolor machines:

* Enable the watchdog driver that was added during the 4.2 merge window, both in .dtsi and in multi_v7_defconfig

* Use the standard stdout-path property in the chosen node to configure the console

* Make .dts/.dtsi files to the Digicolor MAINTAINERS entry

Based on v4.2-rc1.

Baruch Siach (4):
ARM: digicolor: enable watchdog device
ARM: multi_v7_defconfig: enable Conexant Digicolor watchdog
ARM: digicolor: dts: use stdout-path for console configuration
MAINTAINERS: digicolor: add dts files

 MAINTAINERS                           | 1 +
 arch/arm/boot/dts/cx92755.dtsi        | 7 +++++++
 arch/arm/boot/dts/cx92755_equinox.dts | 3 +--
 arch/arm/configs/multi_v7_defconfig   | 1 +
 4 files changed, 10 insertions(+), 2 deletions(-)
Signature · 1 line
2.1.4
#1 lore raw

PATCH 1/4 ARM: digicolor: enable watchdog device

---
 arch/arm/boot/dts/cx92755.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/boot/dts/cx92755.dtsi +7 -0
index af333261d046..df4c6f1f93f9 100644
@@ -88,6 +88,13 @@
 		interrupts = <25>;
 	};
 
+	watchdog at f0000fc0 {
+		compatible = "cnxt,cx92755-wdt";
+		reg = <0xf0000fc0 0x8>;
+		clocks = <&main_clk>;
+		timeout-sec = <15>;
+	};
+
 	uc_regs: syscon at f00003a0 {
 		compatible = "cnxt,cx92755-uc", "syscon";
 		reg = <0xf00003a0 0x10>;
Signature · 1 line
2.1.4
#2 lore raw

PATCH 2/4 ARM: multi_v7_defconfig: enable Conexant Digicolor watchdog

In reply to Baruch Siach
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/multi_v7_defconfig +1 -0
index 6d83a1bf0c74..d0450e399a07 100644
@@ -372,6 +372,7 @@ CONFIG_ORION_WATCHDOG=y
 CONFIG_ST_LPC_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
 CONFIG_MESON_WATCHDOG=y
+CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_BCM590XX=y
Signature · 1 line
2.1.4
#3 lore raw

PATCH 3/4 ARM: digicolor: dts: use stdout-path for console configuration

In reply to Baruch Siach
---
 arch/arm/boot/dts/cx92755_equinox.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
arch/arm/boot/dts/cx92755_equinox.dts +1 -2
index 90d52cc416dc..5da00806c41e 100644
@@ -64,8 +64,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 };
 
Signature · 1 line
2.1.4
#4 lore raw

PATCH 4/4 MAINTAINERS: digicolor: add dts files

In reply to Baruch Siach

The 'digicolor' regexp doesn't cover the dts files. Add a glob pattern for them.

---
 MAINTAINERS | 1 +
 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
index 8133cefb6b6e..3961bc4b0ba6 100644
@@ -1001,6 +1001,7 @@ ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
 M:	Baruch Siach <[email protected]>
 L:	linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	arch/arm/boot/dts/cx92755*
 N:	digicolor
 
 ARM/EBSA110 MACHINE SUPPORT
Signature · 1 line
2.1.4
#5 lore raw

PATCH 4/4 MAINTAINERS: digicolor: add dts files

Quoted 4 lines · Baruch Siach

The 'digicolor' regexp doesn't cover the dts files. Add a glob pattern for them.

Thanks, applied to fixes.

-Olof

#6 lore raw

cover ARM: digicolor: misc updates for 4.3

In reply to Baruch Siach
Quoted 10 lines · Baruch Siach

This series contains the following updates for Conexant Digicolor machines:

* Enable the watchdog driver that was added during the 4.2 merge window, both in .dtsi and in multi_v7_defconfig

* Use the standard stdout-path property in the chosen node to configure the console

* Make .dts/.dtsi files to the Digicolor MAINTAINERS entry

Quoted 7 lines

Based on v4.2-rc1.

Baruch Siach (4):
ARM: digicolor: enable watchdog device
ARM: multi_v7_defconfig: enable Conexant Digicolor watchdog
ARM: digicolor: dts: use stdout-path for console configuration
MAINTAINERS: digicolor: add dts files

Thanks, I applied the two DT patches to next/dt, the defconfig change to next/defconfig.

-Olof