Janitorial: powerpc: remove PowerPC non-generic boards
cover Janitorial: powerpc: remove PowerPC non-generic boards
PowerPC supports generic board framework, so all the PowerPC boards should be converted(, otherwise removed).
This is docmented in doc/README.generic-board, was announced in the ML again and again, and warning messages have been displayed when such boards are built.
This series clears away all non-generic boards from PowerPC arch.
I am sending it as RFC to give the board maintainers some time to take appropriate action to keep the board support.
If you want to keep them, please convert your board to Generic Board (with run-test) and send a patch in two weeks.
This is the _last_ call.
If you do not respend to this seris, it will be too late.
I will send a non-RFC series at the end of August to really delete boards that nobody would take any action.
Masahiro Yamada (28):
powerpc: remove alpr support
powerpc: remove csb272, csb472 support
powerpc: remove lwmon5 support
powerpc: remove p3p440 support
powerpc: remove pcs440ep support
powerpc: remove sbc405 support
powerpc: remove zeus support
powerpc: remove cmi_mpc5xx support
powerpc: remove canmb board support
powerpc: remove inka4x0 support
powerpc: remove ipek01 support
powerpc: remove jupiter support
powerpc: remove motionpro support
powerpc: remove munices support
powerpc: remove pcm030 support
powerpc: remove v38b support
powerpc: remove socrates support
powerpc: remove stxgp3, stxssa support
powerpc: remove MPC8540ADS support
powerpc: remove MPC8541CDS support
powerpc: remove MPC8544DS support
powerpc: remove MPC8548CDS support
powerpc: remove MPC8555CDS support
powerpc: remove MPC8560ADS support
powerpc: remove MPC8568MDS support
powerpc: remove MPC8569MDS support
powerpc: remove MPC8610HPCD support
powerpc: remove sbc8641d support
arch/powerpc/cpu/mpc5xx/Kconfig | 4 - arch/powerpc/cpu/mpc5xxx/Kconfig | 32 -- arch/powerpc/cpu/mpc85xx/Kconfig | 44 -- arch/powerpc/cpu/mpc86xx/Kconfig | 8 - arch/powerpc/cpu/ppc4xx/Kconfig | 33 -- board/canmb/Kconfig | 9 - board/canmb/MAINTAINERS | 6 - board/canmb/Makefile | 9 - board/canmb/canmb.c | 183 ------ board/canmb/mt48lc16m32s2-75.h | 14 - board/cmi/Kconfig | 9 - board/cmi/MAINTAINERS | 6 - board/cmi/Makefile | 8 - board/cmi/README | 84 --- board/cmi/cmi.c | 57 -- board/cmi/flash.c | 501 ----------------- board/csb272/Kconfig | 9 - board/csb272/MAINTAINERS | 6 - board/csb272/Makefile | 9 - board/csb272/csb272.c | 171 ------ board/csb272/init.S | 196 ------- board/csb472/Kconfig | 9 - board/csb472/MAINTAINERS | 6 - board/csb472/Makefile | 9 - board/csb472/csb472.c | 138 ----- board/csb472/init.S | 192 ------- board/freescale/mpc8540ads/Kconfig | 12 - board/freescale/mpc8540ads/MAINTAINERS | 6 - board/freescale/mpc8540ads/Makefile | 11 - board/freescale/mpc8540ads/ddr.c | 46 -- board/freescale/mpc8540ads/law.c | 42 -- board/freescale/mpc8540ads/mpc8540ads.c | 242 -------- board/freescale/mpc8540ads/tlb.c | 95 ---- board/freescale/mpc8541cds/Kconfig | 12 - board/freescale/mpc8541cds/MAINTAINERS | 7 - board/freescale/mpc8541cds/Makefile | 12 - board/freescale/mpc8541cds/ddr.c | 56 -- board/freescale/mpc8541cds/law.c | 42 -- board/freescale/mpc8541cds/mpc8541cds.c | 427 -------------- board/freescale/mpc8541cds/tlb.c | 96 ---- board/freescale/mpc8544ds/Kconfig | 12 - board/freescale/mpc8544ds/MAINTAINERS | 6 - board/freescale/mpc8544ds/Makefile | 12 - board/freescale/mpc8544ds/README | 122 ---- board/freescale/mpc8544ds/ddr.c | 59 -- board/freescale/mpc8544ds/law.c | 18 - board/freescale/mpc8544ds/mpc8544ds.c | 320 ----------- board/freescale/mpc8544ds/tlb.c | 75 --- board/freescale/mpc8548cds/Kconfig | 12 - board/freescale/mpc8548cds/MAINTAINERS | 8 - board/freescale/mpc8548cds/Makefile | 12 - board/freescale/mpc8548cds/ddr.c | 56 -- board/freescale/mpc8548cds/law.c | 19 - board/freescale/mpc8548cds/mpc8548cds.c | 358 ------------ board/freescale/mpc8548cds/tlb.c | 87 --- board/freescale/mpc8555cds/Kconfig | 12 - board/freescale/mpc8555cds/MAINTAINERS | 7 - board/freescale/mpc8555cds/Makefile | 12 - board/freescale/mpc8555cds/ddr.c | 56 -- board/freescale/mpc8555cds/law.c | 42 -- board/freescale/mpc8555cds/mpc8555cds.c | 428 -------------- board/freescale/mpc8555cds/tlb.c | 96 ---- board/freescale/mpc8560ads/Kconfig | 12 - board/freescale/mpc8560ads/MAINTAINERS | 6 - board/freescale/mpc8560ads/Makefile | 11 - board/freescale/mpc8560ads/ddr.c | 46 -- board/freescale/mpc8560ads/law.c | 42 -- board/freescale/mpc8560ads/mpc8560ads.c | 462 --------------- board/freescale/mpc8560ads/tlb.c | 95 ---- board/freescale/mpc8568mds/Kconfig | 12 - board/freescale/mpc8568mds/MAINTAINERS | 6 - board/freescale/mpc8568mds/Makefile | 13 - board/freescale/mpc8568mds/bcsr.c | 61 -- board/freescale/mpc8568mds/bcsr.h | 93 ---- board/freescale/mpc8568mds/ddr.c | 56 -- board/freescale/mpc8568mds/law.c | 41 -- board/freescale/mpc8568mds/mpc8568mds.c | 356 ------------ board/freescale/mpc8568mds/tlb.c | 84 --- board/freescale/mpc8569mds/Kconfig | 12 - board/freescale/mpc8569mds/MAINTAINERS | 7 - board/freescale/mpc8569mds/Makefile | 13 - board/freescale/mpc8569mds/README | 77 --- board/freescale/mpc8569mds/bcsr.c | 50 -- board/freescale/mpc8569mds/bcsr.h | 72 --- board/freescale/mpc8569mds/ddr.c | 66 --- board/freescale/mpc8569mds/law.c | 41 -- board/freescale/mpc8569mds/mpc8569mds.c | 585 ------------------- board/freescale/mpc8569mds/tlb.c | 95 ---- board/freescale/mpc8610hpcd/Kconfig | 12 - board/freescale/mpc8610hpcd/MAINTAINERS | 6 - board/freescale/mpc8610hpcd/Makefile | 9 - board/freescale/mpc8610hpcd/README | 73 --- board/freescale/mpc8610hpcd/ddr.c | 59 -- board/freescale/mpc8610hpcd/law.c | 22 - board/freescale/mpc8610hpcd/mpc8610hpcd.c | 329 ----------- board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 71 --- board/inka4x0/Kconfig | 9 - board/inka4x0/MAINTAINERS | 6 - board/inka4x0/Makefile | 8 - board/inka4x0/inka4x0.c | 250 --------- board/inka4x0/inkadiag.c | 464 --------------- board/inka4x0/k4h511638c.h | 16 - board/inka4x0/mt46v16m16-75.h | 16 - board/inka4x0/mt46v32m16-75.h | 16 - board/inka4x0/mt48lc16m16a2-75.h | 14 - board/ipek01/Kconfig | 9 - board/ipek01/MAINTAINERS | 6 - board/ipek01/Makefile | 8 - board/ipek01/ipek01.c | 268 --------- board/jupiter/Kconfig | 9 - board/jupiter/MAINTAINERS | 6 - board/jupiter/Makefile | 8 - board/jupiter/jupiter.c | 292 ---------- board/lwmon5/Kconfig | 9 - board/lwmon5/MAINTAINERS | 7 - board/lwmon5/Makefile | 9 - board/lwmon5/config.mk | 18 - board/lwmon5/init.S | 75 --- board/lwmon5/kbd.c | 490 ---------------- board/lwmon5/lwmon5.c | 558 ------------------- board/lwmon5/sdram.c | 247 -------- board/motionpro/Kconfig | 9 - board/motionpro/MAINTAINERS | 6 - board/motionpro/Makefile | 8 - board/motionpro/motionpro.c | 220 -------- board/munices/Kconfig | 9 - board/munices/MAINTAINERS | 6 - board/munices/Makefile | 8 - board/munices/mt48lc16m16a2-75.h | 14 - board/munices/munices.c | 155 ------ board/pcs440ep/Kconfig | 9 - board/pcs440ep/MAINTAINERS | 6 - board/pcs440ep/Makefile | 9 - board/pcs440ep/config.mk | 23 - board/pcs440ep/flash.c | 607 -------------------- board/pcs440ep/init.S | 56 -- board/pcs440ep/pcs440ep.c | 755 ------------------------- board/phytec/pcm030/Kconfig | 12 - board/phytec/pcm030/MAINTAINERS | 7 - board/phytec/pcm030/Makefile | 8 - board/phytec/pcm030/README | 42 -- board/phytec/pcm030/mt46v32m16-75.h | 21 - board/phytec/pcm030/pcm030.c | 205 ------- board/prodrive/alpr/Kconfig | 12 - board/prodrive/alpr/MAINTAINERS | 6 - board/prodrive/alpr/Makefile | 9 - board/prodrive/alpr/alpr.c | 215 ------- board/prodrive/alpr/config.mk | 16 - board/prodrive/alpr/fpga.c | 239 -------- board/prodrive/alpr/init.S | 53 -- board/prodrive/alpr/nand.c | 124 ----- board/prodrive/p3p440/Kconfig | 12 - board/prodrive/p3p440/MAINTAINERS | 6 - board/prodrive/p3p440/Makefile | 9 - board/prodrive/p3p440/config.mk | 16 - board/prodrive/p3p440/init.S | 38 -- board/prodrive/p3p440/p3p440.c | 177 ------ board/prodrive/p3p440/p3p440.h | 24 - board/sbc405/Kconfig | 9 - board/sbc405/MAINTAINERS | 6 - board/sbc405/Makefile | 8 - board/sbc405/sbc405.c | 91 --- board/sbc405/strataflash.c | 774 -------------------------- board/sbc8641d/Kconfig | 9 - board/sbc8641d/MAINTAINERS | 6 - board/sbc8641d/Makefile | 10 - board/sbc8641d/README | 28 - board/sbc8641d/ddr.c | 56 -- board/sbc8641d/law.c | 40 -- board/sbc8641d/sbc8641d.c | 261 --------- board/socrates/Kconfig | 9 - board/socrates/MAINTAINERS | 6 - board/socrates/Makefile | 15 - board/socrates/ddr.c | 56 -- board/socrates/law.c | 44 -- board/socrates/nand.c | 163 ------ board/socrates/sdram.c | 96 ---- board/socrates/socrates.c | 434 --------------- board/socrates/tlb.c | 105 ---- board/socrates/upm_table.h | 59 -- board/stx/stxgp3/Kconfig | 12 - board/stx/stxgp3/MAINTAINERS | 6 - board/stx/stxgp3/Makefile | 12 - board/stx/stxgp3/ddr.c | 46 -- board/stx/stxgp3/flash.c | 499 ----------------- board/stx/stxgp3/law.c | 42 -- board/stx/stxgp3/stxgp3.c | 331 ----------- board/stx/stxgp3/tlb.c | 114 ---- board/stx/stxssa/Kconfig | 12 - board/stx/stxssa/MAINTAINERS | 7 - board/stx/stxssa/Makefile | 11 - board/stx/stxssa/ddr.c | 47 -- board/stx/stxssa/law.c | 44 -- board/stx/stxssa/stxssa.c | 370 ------------ board/stx/stxssa/tlb.c | 90 --- board/v38b/Kconfig | 9 - board/v38b/MAINTAINERS | 6 - board/v38b/Makefile | 8 - board/v38b/ethaddr.c | 197 ------- board/v38b/v38b.c | 260 --------- board/zeus/Kconfig | 9 - board/zeus/MAINTAINERS | 6 - board/zeus/Makefile | 8 - board/zeus/README | 73 --- board/zeus/update.c | 89 --- board/zeus/zeus.c | 410 -------------- configs/MPC8540ADS_defconfig | 3 - configs/MPC8541CDS_defconfig | 3 - configs/MPC8541CDS_legacy_defconfig | 4 - configs/MPC8544DS_defconfig | 3 - configs/MPC8548CDS_36BIT_defconfig | 4 - configs/MPC8548CDS_defconfig | 3 - configs/MPC8548CDS_legacy_defconfig | 4 - configs/MPC8555CDS_defconfig | 3 - configs/MPC8555CDS_legacy_defconfig | 4 - configs/MPC8560ADS_defconfig | 3 - configs/MPC8568MDS_defconfig | 3 - configs/MPC8569MDS_ATM_defconfig | 4 - configs/MPC8569MDS_defconfig | 3 - configs/MPC8610HPCD_defconfig | 4 - configs/alpr_defconfig | 7 - configs/canmb_defconfig | 4 - configs/cmi_mpc5xx_defconfig | 6 - configs/csb272_defconfig | 4 - configs/csb472_defconfig | 4 - configs/inka4x0_defconfig | 4 - configs/ipek01_defconfig | 4 - configs/jupiter_defconfig | 4 - configs/lcd4_lwmon5_defconfig | 6 - configs/lwmon5_defconfig | 4 - configs/motionpro_defconfig | 7 - configs/munices_defconfig | 4 - configs/p3p440_defconfig | 4 - configs/pcm030_LOWBOOT_defconfig | 5 - configs/pcm030_defconfig | 4 - configs/pcs440ep_defconfig | 4 - configs/sbc405_defconfig | 4 - configs/sbc8641d_defconfig | 4 - configs/socrates_defconfig | 5 - configs/stxgp3_defconfig | 4 - configs/stxssa_4M_defconfig | 5 - configs/stxssa_defconfig | 4 - configs/v38b_defconfig | 4 - configs/zeus_defconfig | 4 - include/configs/MPC8540ADS.h | 448 --------------- include/configs/MPC8541CDS.h | 465 ---------------- include/configs/MPC8544DS.h | 514 ----------------- include/configs/MPC8548CDS.h | 605 -------------------- include/configs/MPC8555CDS.h | 461 --------------- include/configs/MPC8560ADS.h | 488 ---------------- include/configs/MPC8568MDS.h | 490 ---------------- include/configs/MPC8569MDS.h | 583 ------------------- include/configs/MPC8610HPCD.h | 666 ---------------------- include/configs/alpr.h | 351 ------------ include/configs/canmb.h | 211 ------- include/configs/cmi_mpc5xx.h | 240 -------- include/configs/csb272.h | 282 ---------- include/configs/csb472.h | 281 ---------- include/configs/inka4x0.h | 413 -------------- include/configs/ipek01.h | 374 ------------- include/configs/jupiter.h | 282 ---------- include/configs/lwmon5.h | 692 ----------------------- include/configs/motionpro.h | 390 ------------- include/configs/munices.h | 197 ------- include/configs/p3p440.h | 302 ---------- include/configs/pcm030.h | 430 -------------- include/configs/pcs440ep.h | 457 --------------- include/configs/sbc405.h | 252 --------- include/configs/sbc8641d.h | 590 -------------------- include/configs/socrates.h | 446 --------------- include/configs/stxgp3.h | 355 ------------ include/configs/stxssa.h | 441 --------------- include/configs/v38b.h | 333 ----------- include/configs/zeus.h | 350 ------------ 274 files changed, 31200 deletions(-) delete mode 100644 board/canmb/Kconfig delete mode 100644 board/canmb/MAINTAINERS delete mode 100644 board/canmb/Makefile delete mode 100644 board/canmb/canmb.c delete mode 100644 board/canmb/mt48lc16m32s2-75.h delete mode 100644 board/cmi/Kconfig delete mode 100644 board/cmi/MAINTAINERS delete mode 100644 board/cmi/Makefile delete mode 100644 board/cmi/README delete mode 100644 board/cmi/cmi.c delete mode 100644 board/cmi/flash.c delete mode 100644 board/csb272/Kconfig delete mode 100644 board/csb272/MAINTAINERS delete mode 100644 board/csb272/Makefile delete mode 100644 board/csb272/csb272.c delete mode 100644 board/csb272/init.S delete mode 100644 board/csb472/Kconfig delete mode 100644 board/csb472/MAINTAINERS delete mode 100644 board/csb472/Makefile delete mode 100644 board/csb472/csb472.c delete mode 100644 board/csb472/init.S delete mode 100644 board/freescale/mpc8540ads/Kconfig delete mode 100644 board/freescale/mpc8540ads/MAINTAINERS delete mode 100644 board/freescale/mpc8540ads/Makefile delete mode 100644 board/freescale/mpc8540ads/ddr.c delete mode 100644 board/freescale/mpc8540ads/law.c delete mode 100644 board/freescale/mpc8540ads/mpc8540ads.c delete mode 100644 board/freescale/mpc8540ads/tlb.c delete mode 100644 board/freescale/mpc8541cds/Kconfig delete mode 100644 board/freescale/mpc8541cds/MAINTAINERS delete mode 100644 board/freescale/mpc8541cds/Makefile delete mode 100644 board/freescale/mpc8541cds/ddr.c delete mode 100644 board/freescale/mpc8541cds/law.c delete mode 100644 board/freescale/mpc8541cds/mpc8541cds.c delete mode 100644 board/freescale/mpc8541cds/tlb.c delete mode 100644 board/freescale/mpc8544ds/Kconfig delete mode 100644 board/freescale/mpc8544ds/MAINTAINERS delete mode 100644 board/freescale/mpc8544ds/Makefile delete mode 100644 board/freescale/mpc8544ds/README delete mode 100644 board/freescale/mpc8544ds/ddr.c delete mode 100644 board/freescale/mpc8544ds/law.c delete mode 100644 board/freescale/mpc8544ds/mpc8544ds.c delete mode 100644 board/freescale/mpc8544ds/tlb.c delete mode 100644 board/freescale/mpc8548cds/Kconfig delete mode 100644 board/freescale/mpc8548cds/MAINTAINERS delete mode 100644 board/freescale/mpc8548cds/Makefile delete mode 100644 board/freescale/mpc8548cds/ddr.c delete mode 100644 board/freescale/mpc8548cds/law.c delete mode 100644 board/freescale/mpc8548cds/mpc8548cds.c delete mode 100644 board/freescale/mpc8548cds/tlb.c delete mode 100644 board/freescale/mpc8555cds/Kconfig delete mode 100644 board/freescale/mpc8555cds/MAINTAINERS delete mode 100644 board/freescale/mpc8555cds/Makefile delete mode 100644 board/freescale/mpc8555cds/ddr.c delete mode 100644 board/freescale/mpc8555cds/law.c delete mode 100644 board/freescale/mpc8555cds/mpc8555cds.c delete mode 100644 board/freescale/mpc8555cds/tlb.c delete mode 100644 board/freescale/mpc8560ads/Kconfig delete mode 100644 board/freescale/mpc8560ads/MAINTAINERS delete mode 100644 board/freescale/mpc8560ads/Makefile delete mode 100644 board/freescale/mpc8560ads/ddr.c delete mode 100644 board/freescale/mpc8560ads/law.c delete mode 100644 board/freescale/mpc8560ads/mpc8560ads.c delete mode 100644 board/freescale/mpc8560ads/tlb.c delete mode 100644 board/freescale/mpc8568mds/Kconfig delete mode 100644 board/freescale/mpc8568mds/MAINTAINERS delete mode 100644 board/freescale/mpc8568mds/Makefile delete mode 100644 board/freescale/mpc8568mds/bcsr.c delete mode 100644 board/freescale/mpc8568mds/bcsr.h delete mode 100644 board/freescale/mpc8568mds/ddr.c delete mode 100644 board/freescale/mpc8568mds/law.c delete mode 100644 board/freescale/mpc8568mds/mpc8568mds.c delete mode 100644 board/freescale/mpc8568mds/tlb.c delete mode 100644 board/freescale/mpc8569mds/Kconfig delete mode 100644 board/freescale/mpc8569mds/MAINTAINERS delete mode 100644 board/freescale/mpc8569mds/Makefile delete mode 100644 board/freescale/mpc8569mds/README delete mode 100644 board/freescale/mpc8569mds/bcsr.c delete mode 100644 board/freescale/mpc8569mds/bcsr.h delete mode 100644 board/freescale/mpc8569mds/ddr.c delete mode 100644 board/freescale/mpc8569mds/law.c delete mode 100644 board/freescale/mpc8569mds/mpc8569mds.c delete mode 100644 board/freescale/mpc8569mds/tlb.c delete mode 100644 board/freescale/mpc8610hpcd/Kconfig delete mode 100644 board/freescale/mpc8610hpcd/MAINTAINERS delete mode 100644 board/freescale/mpc8610hpcd/Makefile delete mode 100644 board/freescale/mpc8610hpcd/README delete mode 100644 board/freescale/mpc8610hpcd/ddr.c delete mode 100644 board/freescale/mpc8610hpcd/law.c delete mode 100644 board/freescale/mpc8610hpcd/mpc8610hpcd.c delete mode 100644 board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c delete mode 100644 board/inka4x0/Kconfig delete mode 100644 board/inka4x0/MAINTAINERS delete mode 100644 board/inka4x0/Makefile delete mode 100644 board/inka4x0/inka4x0.c delete mode 100644 board/inka4x0/inkadiag.c delete mode 100644 board/inka4x0/k4h511638c.h delete mode 100644 board/inka4x0/mt46v16m16-75.h delete mode 100644 board/inka4x0/mt46v32m16-75.h delete mode 100644 board/inka4x0/mt48lc16m16a2-75.h delete mode 100644 board/ipek01/Kconfig delete mode 100644 board/ipek01/MAINTAINERS delete mode 100644 board/ipek01/Makefile delete mode 100644 board/ipek01/ipek01.c delete mode 100644 board/jupiter/Kconfig delete mode 100644 board/jupiter/MAINTAINERS delete mode 100644 board/jupiter/Makefile delete mode 100644 board/jupiter/jupiter.c delete mode 100644 board/lwmon5/Kconfig delete mode 100644 board/lwmon5/MAINTAINERS delete mode 100644 board/lwmon5/Makefile delete mode 100644 board/lwmon5/config.mk delete mode 100644 board/lwmon5/init.S delete mode 100644 board/lwmon5/kbd.c delete mode 100644 board/lwmon5/lwmon5.c delete mode 100644 board/lwmon5/sdram.c delete mode 100644 board/motionpro/Kconfig delete mode 100644 board/motionpro/MAINTAINERS delete mode 100644 board/motionpro/Makefile delete mode 100644 board/motionpro/motionpro.c delete mode 100644 board/munices/Kconfig delete mode 100644 board/munices/MAINTAINERS delete mode 100644 board/munices/Makefile delete mode 100644 board/munices/mt48lc16m16a2-75.h delete mode 100644 board/munices/munices.c delete mode 100644 board/pcs440ep/Kconfig delete mode 100644 board/pcs440ep/MAINTAINERS delete mode 100644 board/pcs440ep/Makefile delete mode 100644 board/pcs440ep/config.mk delete mode 100644 board/pcs440ep/flash.c delete mode 100644 board/pcs440ep/init.S delete mode 100644 board/pcs440ep/pcs440ep.c delete mode 100644 board/phytec/pcm030/Kconfig delete mode 100644 board/phytec/pcm030/MAINTAINERS delete mode 100644 board/phytec/pcm030/Makefile delete mode 100644 board/phytec/pcm030/README delete mode 100644 board/phytec/pcm030/mt46v32m16-75.h delete mode 100644 board/phytec/pcm030/pcm030.c delete mode 100644 board/prodrive/alpr/Kconfig delete mode 100644 board/prodrive/alpr/MAINTAINERS delete mode 100644 board/prodrive/alpr/Makefile delete mode 100644 board/prodrive/alpr/alpr.c delete mode 100644 board/prodrive/alpr/config.mk delete mode 100644 board/prodrive/alpr/fpga.c delete mode 100644 board/prodrive/alpr/init.S delete mode 100644 board/prodrive/alpr/nand.c delete mode 100644 board/prodrive/p3p440/Kconfig delete mode 100644 board/prodrive/p3p440/MAINTAINERS delete mode 100644 board/prodrive/p3p440/Makefile delete mode 100644 board/prodrive/p3p440/config.mk delete mode 100644 board/prodrive/p3p440/init.S delete mode 100644 board/prodrive/p3p440/p3p440.c delete mode 100644 board/prodrive/p3p440/p3p440.h delete mode 100644 board/sbc405/Kconfig delete mode 100644 board/sbc405/MAINTAINERS delete mode 100644 board/sbc405/Makefile delete mode 100644 board/sbc405/sbc405.c delete mode 100644 board/sbc405/strataflash.c delete mode 100644 board/sbc8641d/Kconfig delete mode 100644 board/sbc8641d/MAINTAINERS delete mode 100644 board/sbc8641d/Makefile delete mode 100644 board/sbc8641d/README delete mode 100644 board/sbc8641d/ddr.c delete mode 100644 board/sbc8641d/law.c delete mode 100644 board/sbc8641d/sbc8641d.c delete mode 100644 board/socrates/Kconfig delete mode 100644 board/socrates/MAINTAINERS delete mode 100644 board/socrates/Makefile delete mode 100644 board/socrates/ddr.c delete mode 100644 board/socrates/law.c delete mode 100644 board/socrates/nand.c delete mode 100644 board/socrates/sdram.c delete mode 100644 board/socrates/socrates.c delete mode 100644 board/socrates/tlb.c delete mode 100644 board/socrates/upm_table.h delete mode 100644 board/stx/stxgp3/Kconfig delete mode 100644 board/stx/stxgp3/MAINTAINERS delete mode 100644 board/stx/stxgp3/Makefile delete mode 100644 board/stx/stxgp3/ddr.c delete mode 100644 board/stx/stxgp3/flash.c delete mode 100644 board/stx/stxgp3/law.c delete mode 100644 board/stx/stxgp3/stxgp3.c delete mode 100644 board/stx/stxgp3/tlb.c delete mode 100644 board/stx/stxssa/Kconfig delete mode 100644 board/stx/stxssa/MAINTAINERS delete mode 100644 board/stx/stxssa/Makefile delete mode 100644 board/stx/stxssa/ddr.c delete mode 100644 board/stx/stxssa/law.c delete mode 100644 board/stx/stxssa/stxssa.c delete mode 100644 board/stx/stxssa/tlb.c delete mode 100644 board/v38b/Kconfig delete mode 100644 board/v38b/MAINTAINERS delete mode 100644 board/v38b/Makefile delete mode 100644 board/v38b/ethaddr.c delete mode 100644 board/v38b/v38b.c delete mode 100644 board/zeus/Kconfig delete mode 100644 board/zeus/MAINTAINERS delete mode 100644 board/zeus/Makefile delete mode 100644 board/zeus/README delete mode 100644 board/zeus/update.c delete mode 100644 board/zeus/zeus.c delete mode 100644 configs/MPC8540ADS_defconfig delete mode 100644 configs/MPC8541CDS_defconfig delete mode 100644 configs/MPC8541CDS_legacy_defconfig delete mode 100644 configs/MPC8544DS_defconfig delete mode 100644 configs/MPC8548CDS_36BIT_defconfig delete mode 100644 configs/MPC8548CDS_defconfig delete mode 100644 configs/MPC8548CDS_legacy_defconfig delete mode 100644 configs/MPC8555CDS_defconfig delete mode 100644 configs/MPC8555CDS_legacy_defconfig delete mode 100644 configs/MPC8560ADS_defconfig delete mode 100644 configs/MPC8568MDS_defconfig delete mode 100644 configs/MPC8569MDS_ATM_defconfig delete mode 100644 configs/MPC8569MDS_defconfig delete mode 100644 configs/MPC8610HPCD_defconfig delete mode 100644 configs/alpr_defconfig delete mode 100644 configs/canmb_defconfig delete mode 100644 configs/cmi_mpc5xx_defconfig delete mode 100644 configs/csb272_defconfig delete mode 100644 configs/csb472_defconfig delete mode 100644 configs/inka4x0_defconfig delete mode 100644 configs/ipek01_defconfig delete mode 100644 configs/jupiter_defconfig delete mode 100644 configs/lcd4_lwmon5_defconfig delete mode 100644 configs/lwmon5_defconfig delete mode 100644 configs/motionpro_defconfig delete mode 100644 configs/munices_defconfig delete mode 100644 configs/p3p440_defconfig delete mode 100644 configs/pcm030_LOWBOOT_defconfig delete mode 100644 configs/pcm030_defconfig delete mode 100644 configs/pcs440ep_defconfig delete mode 100644 configs/sbc405_defconfig delete mode 100644 configs/sbc8641d_defconfig delete mode 100644 configs/socrates_defconfig delete mode 100644 configs/stxgp3_defconfig delete mode 100644 configs/stxssa_4M_defconfig delete mode 100644 configs/stxssa_defconfig delete mode 100644 configs/v38b_defconfig delete mode 100644 configs/zeus_defconfig delete mode 100644 include/configs/MPC8540ADS.h delete mode 100644 include/configs/MPC8541CDS.h delete mode 100644 include/configs/MPC8544DS.h delete mode 100644 include/configs/MPC8548CDS.h delete mode 100644 include/configs/MPC8555CDS.h delete mode 100644 include/configs/MPC8560ADS.h delete mode 100644 include/configs/MPC8568MDS.h delete mode 100644 include/configs/MPC8569MDS.h delete mode 100644 include/configs/MPC8610HPCD.h delete mode 100644 include/configs/alpr.h delete mode 100644 include/configs/canmb.h delete mode 100644 include/configs/cmi_mpc5xx.h delete mode 100644 include/configs/csb272.h delete mode 100644 include/configs/csb472.h delete mode 100644 include/configs/inka4x0.h delete mode 100644 include/configs/ipek01.h delete mode 100644 include/configs/jupiter.h delete mode 100644 include/configs/lwmon5.h delete mode 100644 include/configs/motionpro.h delete mode 100644 include/configs/munices.h delete mode 100644 include/configs/p3p440.h delete mode 100644 include/configs/pcm030.h delete mode 100644 include/configs/pcs440ep.h delete mode 100644 include/configs/sbc405.h delete mode 100644 include/configs/sbc8641d.h delete mode 100644 include/configs/socrates.h delete mode 100644 include/configs/stxgp3.h delete mode 100644 include/configs/stxssa.h delete mode 100644 include/configs/v38b.h delete mode 100644 include/configs/zeus.h
Signature · 1 line
1.9.1
RFC PATCH 1/28 powerpc: remove alpr support
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/ppc4xx/Kconfig | 4 - board/prodrive/alpr/Kconfig | 12 -- board/prodrive/alpr/MAINTAINERS | 6 - board/prodrive/alpr/Makefile | 9 -- board/prodrive/alpr/alpr.c | 215 ------------------------ board/prodrive/alpr/config.mk | 16 -- board/prodrive/alpr/fpga.c | 239 --------------------------- board/prodrive/alpr/init.S | 53 ------ board/prodrive/alpr/nand.c | 124 -------------- configs/alpr_defconfig | 7 - include/configs/alpr.h | 351 ---------------------------------------- 11 files changed, 1036 deletions(-) delete mode 100644 board/prodrive/alpr/Kconfig delete mode 100644 board/prodrive/alpr/MAINTAINERS delete mode 100644 board/prodrive/alpr/Makefile delete mode 100644 board/prodrive/alpr/alpr.c delete mode 100644 board/prodrive/alpr/config.mk delete mode 100644 board/prodrive/alpr/fpga.c delete mode 100644 board/prodrive/alpr/init.S delete mode 100644 board/prodrive/alpr/nand.c delete mode 100644 configs/alpr_defconfig delete mode 100644 include/configs/alpr.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
@@ -140,9 +140,6 @@ config TARGET_MIP405 config TARGET_PIP405 bool "Support PIP405" -config TARGET_ALPR - bool "Support alpr" - config TARGET_P3P440 bool "Support p3p440"
@@ -197,7 +194,6 @@ source "board/mosaixtech/icon/Kconfig" source "board/mpl/mip405/Kconfig" source "board/mpl/pip405/Kconfig" source "board/pcs440ep/Kconfig" -source "board/prodrive/alpr/Kconfig" source "board/prodrive/p3p440/Kconfig" source "board/sbc405/Kconfig" source "board/t3corp/Kconfig"
board/prodrive/alpr/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_ALPR - -config SYS_BOARD - default "alpr" - -config SYS_VENDOR - default "prodrive" - -config SYS_CONFIG_NAME - default "alpr" - -endif
board/prodrive/alpr/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -ALPR BOARD -M: Stefan Roese <[email protected]> -S: Maintained -F: board/prodrive/alpr/ -F: include/configs/alpr.h -F: configs/alpr_defconfig
board/prodrive/alpr/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = alpr.o fpga.o nand.o -extra-y += init.o
board/prodrive/alpr/alpr.c deleted +0 -215
215 lines not on this page · raw message
board/prodrive/alpr/config.mk deleted +0 -16
@@ -1,16 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif
board/prodrive/alpr/fpga.c deleted +0 -239
239 lines not on this page · raw message
board/prodrive/alpr/init.S deleted +0 -53
53 lines not on this page · raw message
board/prodrive/alpr/nand.c deleted +0 -124
124 lines not on this page · raw message
configs/alpr_defconfig deleted +0 -7
@@ -1,7 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_ALPR=y -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set
include/configs/alpr.h deleted +0 -351
351 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 2/28 powerpc: remove csb272, csb472 support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/ppc4xx/Kconfig | 8 -- board/csb272/Kconfig | 9 -- board/csb272/MAINTAINERS | 6 - board/csb272/Makefile | 9 -- board/csb272/csb272.c | 171 ------------------------ board/csb272/init.S | 196 ---------------------------- board/csb472/Kconfig | 9 -- board/csb472/MAINTAINERS | 6 - board/csb472/Makefile | 9 -- board/csb472/csb472.c | 138 -------------------- board/csb472/init.S | 192 --------------------------- configs/csb272_defconfig | 4 - configs/csb472_defconfig | 4 - include/configs/csb272.h | 282 ---------------------------------------- include/configs/csb472.h | 281 --------------------------------------- 15 files changed, 1324 deletions(-) delete mode 100644 board/csb272/Kconfig delete mode 100644 board/csb272/MAINTAINERS delete mode 100644 board/csb272/Makefile delete mode 100644 board/csb272/csb272.c delete mode 100644 board/csb272/init.S delete mode 100644 board/csb472/Kconfig delete mode 100644 board/csb472/MAINTAINERS delete mode 100644 board/csb472/Makefile delete mode 100644 board/csb472/csb472.c delete mode 100644 board/csb472/init.S delete mode 100644 configs/csb272_defconfig delete mode 100644 configs/csb472_defconfig delete mode 100644 include/configs/csb272.h delete mode 100644 include/configs/csb472.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -8
@@ -8,12 +8,6 @@ choice prompt "Target select" optional -config TARGET_CSB272 - bool "Support csb272" - -config TARGET_CSB472 - bool "Support csb472" - config TARGET_LWMON5 bool "Support lwmon5" select SUPPORT_SPL
@@ -176,8 +170,6 @@ source "board/amcc/yosemite/Kconfig" source "board/amcc/yucca/Kconfig" source "board/avnet/fx12mm/Kconfig" source "board/avnet/v5fx30teval/Kconfig" -source "board/csb272/Kconfig" -source "board/csb472/Kconfig" source "board/esd/cpci2dp/Kconfig" source "board/esd/cpci405/Kconfig" source "board/esd/plu405/Kconfig"
board/csb272/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_CSB272 - -config SYS_BOARD - default "csb272" - -config SYS_CONFIG_NAME - default "csb272" - -endif
board/csb272/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -CSB272 BOARD -M: Tolunay Orkun <[email protected]> -S: Maintained -F: board/csb272/ -F: include/configs/csb272.h -F: configs/csb272_defconfig
board/csb272/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = csb272.o -obj-y += init.o
board/csb272/csb272.c deleted +0 -171
171 lines not on this page · raw message
board/csb272/init.S deleted +0 -196
196 lines not on this page · raw message
board/csb472/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_CSB472 - -config SYS_BOARD - default "csb472" - -config SYS_CONFIG_NAME - default "csb472" - -endif
board/csb472/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -CSB472 BOARD -M: Tolunay Orkun <[email protected]> -S: Maintained -F: board/csb472/ -F: include/configs/csb472.h -F: configs/csb472_defconfig
board/csb472/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = csb472.o -obj-y += init.o
board/csb472/csb472.c deleted +0 -138
138 lines not on this page · raw message
board/csb472/init.S deleted +0 -192
192 lines not on this page · raw message
configs/csb272_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_CSB272=y -# CONFIG_CMD_SETEXPR is not set
configs/csb472_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_CSB472=y -# CONFIG_CMD_SETEXPR is not set
include/configs/csb272.h deleted +0 -282
282 lines not on this page · raw message
include/configs/csb472.h deleted +0 -281
281 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 3/28 powerpc: remove lwmon5 support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/ppc4xx/Kconfig | 5 - board/lwmon5/Kconfig | 9 - board/lwmon5/MAINTAINERS | 7 - board/lwmon5/Makefile | 9 - board/lwmon5/config.mk | 18 -- board/lwmon5/init.S | 75 ----- board/lwmon5/kbd.c | 490 ---------------------------- board/lwmon5/lwmon5.c | 558 -------------------------------- board/lwmon5/sdram.c | 247 -------------- configs/lcd4_lwmon5_defconfig | 6 - configs/lwmon5_defconfig | 4 - include/configs/lwmon5.h | 692 ---------------------------------------- 12 files changed, 2120 deletions(-) delete mode 100644 board/lwmon5/Kconfig delete mode 100644 board/lwmon5/MAINTAINERS delete mode 100644 board/lwmon5/Makefile delete mode 100644 board/lwmon5/config.mk delete mode 100644 board/lwmon5/init.S delete mode 100644 board/lwmon5/kbd.c delete mode 100644 board/lwmon5/lwmon5.c delete mode 100644 board/lwmon5/sdram.c delete mode 100644 configs/lcd4_lwmon5_defconfig delete mode 100644 configs/lwmon5_defconfig delete mode 100644 include/configs/lwmon5.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -5
@@ -8,10 +8,6 @@ choice prompt "Target select" optional -config TARGET_LWMON5 - bool "Support lwmon5" - select SUPPORT_SPL - config TARGET_PCS440EP bool "Support pcs440ep"
@@ -181,7 +177,6 @@ source "board/gdsys/405ex/Kconfig" source "board/gdsys/dlvision/Kconfig" source "board/gdsys/gdppc440etx/Kconfig" source "board/gdsys/intip/Kconfig" -source "board/lwmon5/Kconfig" source "board/mosaixtech/icon/Kconfig" source "board/mpl/mip405/Kconfig" source "board/mpl/pip405/Kconfig"
board/lwmon5/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_LWMON5 - -config SYS_BOARD - default "lwmon5" - -config SYS_CONFIG_NAME - default "lwmon5" - -endif
board/lwmon5/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -LWMON5 BOARD -M: Stefan Roese <[email protected]> -S: Maintained -F: board/lwmon5/ -F: include/configs/lwmon5.h -F: configs/lcd4_lwmon5_defconfig -F: configs/lwmon5_defconfig
board/lwmon5/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = lwmon5.o kbd.o sdram.o -extra-y += init.o
board/lwmon5/config.mk deleted +0 -18
@@ -1,18 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# -# lwmon5 (440EPx) -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif
board/lwmon5/init.S deleted +0 -75
75 lines not on this page · raw message
board/lwmon5/kbd.c deleted +0 -490
490 lines not on this page · raw message
board/lwmon5/lwmon5.c deleted +0 -558
558 lines not on this page · raw message
board/lwmon5/sdram.c deleted +0 -247
247 lines not on this page · raw message
configs/lcd4_lwmon5_defconfig deleted +0 -6
@@ -1,6 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_LWMON5=y -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="LCD4_LWMON5" -# CONFIG_CMD_SETEXPR is not set
configs/lwmon5_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_LWMON5=y -# CONFIG_CMD_SETEXPR is not set
include/configs/lwmon5.h deleted +0 -692
692 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 3/28 powerpc: remove lwmon5 support
Hi Masahiro,
Quoted 4 lines · Masahiro Yamada
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
Signed-off-by Masahiro Yamada <[email protected]>
I'd like to keep this board - at least for a while. So I'll send a patch to move it to generic-board later.
Thanks,
Stefan
RFC PATCH 3/28 powerpc: remove lwmon5 support
Quoted 10 lines · Stefan Roese
Hi Masahiro,
Quoted 4 lines · Masahiro Yamada
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
Signed-off-by Masahiro Yamada <[email protected]>I'd like to keep this board - at least for a while. So I'll send a patch to move it to generic-board later.
... in two weeks please :) There really has been a long notice about this..
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150813/ac283c30/attachment.sig>
RFC PATCH 4/28 powerpc: remove p3p440 support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/ppc4xx/Kconfig | 4 - board/prodrive/p3p440/Kconfig | 12 -- board/prodrive/p3p440/MAINTAINERS | 6 - board/prodrive/p3p440/Makefile | 9 -- board/prodrive/p3p440/config.mk | 16 -- board/prodrive/p3p440/init.S | 38 ----- board/prodrive/p3p440/p3p440.c | 177 ---------------------- board/prodrive/p3p440/p3p440.h | 24 --- configs/p3p440_defconfig | 4 - include/configs/p3p440.h | 302 -------------------------------------- 10 files changed, 592 deletions(-) delete mode 100644 board/prodrive/p3p440/Kconfig delete mode 100644 board/prodrive/p3p440/MAINTAINERS delete mode 100644 board/prodrive/p3p440/Makefile delete mode 100644 board/prodrive/p3p440/config.mk delete mode 100644 board/prodrive/p3p440/init.S delete mode 100644 board/prodrive/p3p440/p3p440.c delete mode 100644 board/prodrive/p3p440/p3p440.h delete mode 100644 configs/p3p440_defconfig delete mode 100644 include/configs/p3p440.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
@@ -130,9 +130,6 @@ config TARGET_MIP405 config TARGET_PIP405 bool "Support PIP405" -config TARGET_P3P440 - bool "Support p3p440" - config TARGET_XPEDITE1000 bool "Support xpedite1000"
@@ -181,7 +178,6 @@ source "board/mosaixtech/icon/Kconfig" source "board/mpl/mip405/Kconfig" source "board/mpl/pip405/Kconfig" source "board/pcs440ep/Kconfig" -source "board/prodrive/p3p440/Kconfig" source "board/sbc405/Kconfig" source "board/t3corp/Kconfig" source "board/xes/xpedite1000/Kconfig"
board/prodrive/p3p440/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_P3P440 - -config SYS_BOARD - default "p3p440" - -config SYS_VENDOR - default "prodrive" - -config SYS_CONFIG_NAME - default "p3p440" - -endif
board/prodrive/p3p440/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -P3P440 BOARD -M: Stefan Roese <[email protected]> -S: Maintained -F: board/prodrive/p3p440/ -F: include/configs/p3p440.h -F: configs/p3p440_defconfig
board/prodrive/p3p440/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = p3p440.o -extra-y += init.o
board/prodrive/p3p440/config.mk deleted +0 -16
@@ -1,16 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif
board/prodrive/p3p440/init.S deleted +0 -38
@@ -1,38 +0,0 @@ -/* - * (C) Copyright 2005 - * Stefan Roese, DENX Software Engineering, sr at denx.de. - * - * Copyright (C) 2002 Scott McNutt <[email protected]> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <ppc_asm.tmpl> -#include <asm/mmu.h> -#include <config.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG) - tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) - tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX ) - tlbentry( CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX ) - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG ) - tlbtab_end
board/prodrive/p3p440/p3p440.c deleted +0 -177
177 lines not on this page · raw message
board/prodrive/p3p440/p3p440.h deleted +0 -24
@@ -1,24 +0,0 @@ -/* -* (C) Copyright 2005 -* Stefan Roese, DENX Software Engineering, sr at denx.de. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#ifndef __P3P440_H__ -#define __P3P440_H__ - -#define CONFIG_SYS_GPIO_RDY (0x80000000 >> 11) -#define CONFIG_SYS_MONARCH_IO (0x80000000 >> 18) -#define CONFIG_SYS_EREADY_IO (0x80000000 >> 20) -#define CONFIG_SYS_LED_GREEN (0x80000000 >> 21) -#define CONFIG_SYS_LED_RED (0x80000000 >> 22) - -#define LED_OFF 1 -#define LED_GREEN 2 -#define LED_RED 3 -#define LED_ORANGE 4 - -long int fixed_sdram (void ); - -#endif /* __P3P440_H__ */
configs/p3p440_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_P3P440=y -# CONFIG_CMD_SETEXPR is not set
include/configs/p3p440.h deleted +0 -302
302 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 5/28 powerpc: remove pcs440ep support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/ppc4xx/Kconfig | 4 - board/pcs440ep/Kconfig | 9 - board/pcs440ep/MAINTAINERS | 6 - board/pcs440ep/Makefile | 9 - board/pcs440ep/config.mk | 23 -- board/pcs440ep/flash.c | 607 -------------------------------- board/pcs440ep/init.S | 56 --- board/pcs440ep/pcs440ep.c | 755 ---------------------------------------- configs/pcs440ep_defconfig | 4 - include/configs/pcs440ep.h | 457 ------------------------ 10 files changed, 1930 deletions(-) delete mode 100644 board/pcs440ep/Kconfig delete mode 100644 board/pcs440ep/MAINTAINERS delete mode 100644 board/pcs440ep/Makefile delete mode 100644 board/pcs440ep/config.mk delete mode 100644 board/pcs440ep/flash.c delete mode 100644 board/pcs440ep/init.S delete mode 100644 board/pcs440ep/pcs440ep.c delete mode 100644 configs/pcs440ep_defconfig delete mode 100644 include/configs/pcs440ep.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
@@ -8,9 +8,6 @@ choice prompt "Target select" optional -config TARGET_PCS440EP - bool "Support pcs440ep" - config TARGET_SBC405 bool "Support sbc405"
@@ -177,7 +174,6 @@ source "board/gdsys/intip/Kconfig" source "board/mosaixtech/icon/Kconfig" source "board/mpl/mip405/Kconfig" source "board/mpl/pip405/Kconfig" -source "board/pcs440ep/Kconfig" source "board/sbc405/Kconfig" source "board/t3corp/Kconfig" source "board/xes/xpedite1000/Kconfig"
board/pcs440ep/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_PCS440EP - -config SYS_BOARD - default "pcs440ep" - -config SYS_CONFIG_NAME - default "pcs440ep" - -endif
board/pcs440ep/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -PCS440EP BOARD -M: Stefan Roese <[email protected]> -S: Maintained -F: board/pcs440ep/ -F: include/configs/pcs440ep.h -F: configs/pcs440ep_defconfig
board/pcs440ep/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = pcs440ep.o flash.o -extra-y += init.o
board/pcs440ep/config.mk deleted +0 -23
@@ -1,23 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# PCS440EP board -# - -# Check the U-Boot Image with a SHA1 checksum -ALL-y += u-boot.sha1 - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif
board/pcs440ep/flash.c deleted +0 -607
607 lines not on this page · raw message
board/pcs440ep/init.S deleted +0 -56
56 lines not on this page · raw message
board/pcs440ep/pcs440ep.c deleted +0 -755
755 lines not on this page · raw message
configs/pcs440ep_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_PCS440EP=y -# CONFIG_CMD_SETEXPR is not set
include/configs/pcs440ep.h deleted +0 -457
457 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 6/28 powerpc: remove sbc405 support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/ppc4xx/Kconfig | 4 - board/sbc405/Kconfig | 9 - board/sbc405/MAINTAINERS | 6 - board/sbc405/Makefile | 8 - board/sbc405/sbc405.c | 91 ----- board/sbc405/strataflash.c | 774 ---------------------------------------- configs/sbc405_defconfig | 4 - include/configs/sbc405.h | 252 ------------- 8 files changed, 1148 deletions(-) delete mode 100644 board/sbc405/Kconfig delete mode 100644 board/sbc405/MAINTAINERS delete mode 100644 board/sbc405/Makefile delete mode 100644 board/sbc405/sbc405.c delete mode 100644 board/sbc405/strataflash.c delete mode 100644 configs/sbc405_defconfig delete mode 100644 include/configs/sbc405.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
@@ -8,9 +8,6 @@ choice prompt "Target select" optional -config TARGET_SBC405 - bool "Support sbc405" - config TARGET_T3CORP bool "Support t3corp"
@@ -174,7 +171,6 @@ source "board/gdsys/intip/Kconfig" source "board/mosaixtech/icon/Kconfig" source "board/mpl/mip405/Kconfig" source "board/mpl/pip405/Kconfig" -source "board/sbc405/Kconfig" source "board/t3corp/Kconfig" source "board/xes/xpedite1000/Kconfig" source "board/xilinx/ml507/Kconfig"
board/sbc405/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_SBC405 - -config SYS_BOARD - default "sbc405" - -config SYS_CONFIG_NAME - default "sbc405" - -endif
board/sbc405/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -SBC405 BOARD -#M: - -S: Maintained -F: board/sbc405/ -F: include/configs/sbc405.h -F: configs/sbc405_defconfig
board/sbc405/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = sbc405.o strataflash.o
board/sbc405/sbc405.c deleted +0 -91
91 lines not on this page · raw message
board/sbc405/strataflash.c deleted +0 -774
774 lines not on this page · raw message
configs/sbc405_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_SBC405=y -# CONFIG_CMD_SETEXPR is not set
include/configs/sbc405.h deleted +0 -252
252 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 7/28 powerpc: remove zeus support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/ppc4xx/Kconfig | 4 - board/zeus/Kconfig | 9 - board/zeus/MAINTAINERS | 6 - board/zeus/Makefile | 8 - board/zeus/README | 73 ------- board/zeus/update.c | 89 --------- board/zeus/zeus.c | 410 ---------------------------------------- configs/zeus_defconfig | 4 - include/configs/zeus.h | 350 ---------------------------------- 9 files changed, 953 deletions(-) delete mode 100644 board/zeus/Kconfig delete mode 100644 board/zeus/MAINTAINERS delete mode 100644 board/zeus/Makefile delete mode 100644 board/zeus/README delete mode 100644 board/zeus/update.c delete mode 100644 board/zeus/zeus.c delete mode 100644 configs/zeus_defconfig delete mode 100644 include/configs/zeus.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
@@ -11,9 +11,6 @@ choice config TARGET_T3CORP bool "Support t3corp" -config TARGET_ZEUS - bool "Support zeus" - config TARGET_ACADIA bool "Support acadia"
@@ -176,6 +173,5 @@ source "board/xes/xpedite1000/Kconfig" source "board/xilinx/ml507/Kconfig" source "board/xilinx/ppc405-generic/Kconfig" source "board/xilinx/ppc440-generic/Kconfig" -source "board/zeus/Kconfig" endmenu
board/zeus/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_ZEUS - -config SYS_BOARD - default "zeus" - -config SYS_CONFIG_NAME - default "zeus" - -endif
board/zeus/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -ZEUS BOARD -M: Stefan Roese <[email protected]> -S: Maintained -F: board/zeus/ -F: include/configs/zeus.h -F: configs/zeus_defconfig
board/zeus/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = zeus.o update.o
board/zeus/README deleted +0 -73
73 lines not on this page · raw message
board/zeus/update.c deleted +0 -89
89 lines not on this page · raw message
board/zeus/zeus.c deleted +0 -410
410 lines not on this page · raw message
configs/zeus_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_ZEUS=y -# CONFIG_CMD_SETEXPR is not set
include/configs/zeus.h deleted +0 -350
350 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 8/28 powerpc: remove cmi_mpc5xx support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc5xx/Kconfig | 4 - board/cmi/Kconfig | 9 - board/cmi/MAINTAINERS | 6 - board/cmi/Makefile | 8 - board/cmi/README | 84 ------- board/cmi/cmi.c | 57 ----- board/cmi/flash.c | 501 ---------------------------------------- configs/cmi_mpc5xx_defconfig | 6 - include/configs/cmi_mpc5xx.h | 240 ------------------- 9 files changed, 915 deletions(-) delete mode 100644 board/cmi/Kconfig delete mode 100644 board/cmi/MAINTAINERS delete mode 100644 board/cmi/Makefile delete mode 100644 board/cmi/README delete mode 100644 board/cmi/cmi.c delete mode 100644 board/cmi/flash.c delete mode 100644 configs/cmi_mpc5xx_defconfig delete mode 100644 include/configs/cmi_mpc5xx.h
arch/powerpc/cpu/mpc5xx/Kconfig +0 -4
@@ -8,15 +8,11 @@ choice prompt "Target select" optional -config TARGET_CMI_MPC5XX - bool "Support cmi_mpc5xx" - config TARGET_PATI bool "Support PATI" endchoice -source "board/cmi/Kconfig" source "board/mpl/pati/Kconfig" endmenu
board/cmi/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_CMI_MPC5XX - -config SYS_BOARD - default "cmi" - -config SYS_CONFIG_NAME - default "cmi_mpc5xx" - -endif
board/cmi/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -CMI BOARD -#M: - -S: Maintained -F: board/cmi/ -F: include/configs/cmi_mpc5xx.h -F: configs/cmi_mpc5xx_defconfig
board/cmi/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := flash.o cmi.o
board/cmi/README deleted +0 -84
84 lines not on this page · raw message
board/cmi/cmi.c deleted +0 -57
57 lines not on this page · raw message
board/cmi/flash.c deleted +0 -501
501 lines not on this page · raw message
configs/cmi_mpc5xx_defconfig deleted +0 -6
@@ -1,6 +0,0 @@ -CONFIG_PPC=y -CONFIG_5xx=y -CONFIG_TARGET_CMI_MPC5XX=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NET is not set -# CONFIG_CMD_NFS is not set
include/configs/cmi_mpc5xx.h deleted +0 -240
240 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 9/28 powerpc: remove canmb board support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/canmb/Kconfig | 9 -- board/canmb/MAINTAINERS | 6 -- board/canmb/Makefile | 9 -- board/canmb/canmb.c | 183 --------------------------------- board/canmb/mt48lc16m32s2-75.h | 14 --- configs/canmb_defconfig | 4 - include/configs/canmb.h | 211 --------------------------------------- 8 files changed, 440 deletions(-) delete mode 100644 board/canmb/Kconfig delete mode 100644 board/canmb/MAINTAINERS delete mode 100644 board/canmb/Makefile delete mode 100644 board/canmb/canmb.c delete mode 100644 board/canmb/mt48lc16m32s2-75.h delete mode 100644 configs/canmb_defconfig delete mode 100644 include/configs/canmb.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -15,9 +15,6 @@ config TARGET_A3M071 config TARGET_A4M072 bool "Support a4m072" -config TARGET_CANMB - bool "Support canmb" - config TARGET_CM5200 bool "Support cm5200"
@@ -73,7 +70,6 @@ endchoice source "board/a3m071/Kconfig" source "board/a4m072/Kconfig" -source "board/canmb/Kconfig" source "board/cm5200/Kconfig" source "board/ifm/o2dnt2/Kconfig" source "board/inka4x0/Kconfig"
board/canmb/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_CANMB - -config SYS_BOARD - default "canmb" - -config SYS_CONFIG_NAME - default "canmb" - -endif
board/canmb/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -CANMB BOARD -#M: - -S: Maintained -F: board/canmb/ -F: include/configs/canmb.h -F: configs/canmb_defconfig
board/canmb/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2005-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := canmb.o -
board/canmb/canmb.c deleted +0 -183
183 lines not on this page · raw message
board/canmb/mt48lc16m32s2-75.h deleted +0 -14
@@ -1,14 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 0/* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000
configs/canmb_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_CANMB=y -# CONFIG_CMD_SETEXPR is not set
include/configs/canmb.h deleted +0 -211
211 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 10/28 powerpc: remove inka4x0 support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/inka4x0/Kconfig | 9 - board/inka4x0/MAINTAINERS | 6 - board/inka4x0/Makefile | 8 - board/inka4x0/inka4x0.c | 250 --------------------- board/inka4x0/inkadiag.c | 464 --------------------------------------- board/inka4x0/k4h511638c.h | 16 -- board/inka4x0/mt46v16m16-75.h | 16 -- board/inka4x0/mt46v32m16-75.h | 16 -- board/inka4x0/mt48lc16m16a2-75.h | 14 -- configs/inka4x0_defconfig | 4 - include/configs/inka4x0.h | 413 ---------------------------------- 12 files changed, 1220 deletions(-) delete mode 100644 board/inka4x0/Kconfig delete mode 100644 board/inka4x0/MAINTAINERS delete mode 100644 board/inka4x0/Makefile delete mode 100644 board/inka4x0/inka4x0.c delete mode 100644 board/inka4x0/inkadiag.c delete mode 100644 board/inka4x0/k4h511638c.h delete mode 100644 board/inka4x0/mt46v16m16-75.h delete mode 100644 board/inka4x0/mt46v32m16-75.h delete mode 100644 board/inka4x0/mt48lc16m16a2-75.h delete mode 100644 configs/inka4x0_defconfig delete mode 100644 include/configs/inka4x0.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -18,9 +18,6 @@ config TARGET_A4M072 config TARGET_CM5200 bool "Support cm5200" -config TARGET_INKA4X0 - bool "Support inka4x0" - config TARGET_IPEK01 bool "Support ipek01"
@@ -72,7 +69,6 @@ source "board/a3m071/Kconfig" source "board/a4m072/Kconfig" source "board/cm5200/Kconfig" source "board/ifm/o2dnt2/Kconfig" -source "board/inka4x0/Kconfig" source "board/intercontrol/digsy_mtc/Kconfig" source "board/ipek01/Kconfig" source "board/jupiter/Kconfig"
board/inka4x0/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_INKA4X0 - -config SYS_BOARD - default "inka4x0" - -config SYS_CONFIG_NAME - default "inka4x0" - -endif
board/inka4x0/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -INKA4X0 BOARD -M: Detlev Zundel <[email protected]> -S: Maintained -F: board/inka4x0/ -F: include/configs/inka4x0.h -F: configs/inka4x0_defconfig
board/inka4x0/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2009 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := inka4x0.o inkadiag.o
board/inka4x0/inka4x0.c deleted +0 -250
250 lines not on this page · raw message
board/inka4x0/inkadiag.c deleted +0 -464
464 lines not on this page · raw message
board/inka4x0/k4h511638c.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* -* Copyright (C) 2007 Semihalf -* Written by Marian Balakowicz <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 1/* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x46770000 -#define SDRAM_TAPDELAY 0x10000000
board/inka4x0/mt46v16m16-75.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 1/* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000
board/inka4x0/mt46v32m16-75.h deleted +0 -16
@@ -1,16 +0,0 @@ -/* -* Copyright (C) 2007 Semihalf -* Written by Marian Balakowicz <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 1/* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73711930 -#define SDRAM_CONFIG2 0x46770000 -#define SDRAM_TAPDELAY 0x10000000
board/inka4x0/mt48lc16m16a2-75.h deleted +0 -14
@@ -1,14 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 0/* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000
configs/inka4x0_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_INKA4X0=y -# CONFIG_CMD_SETEXPR is not set
include/configs/inka4x0.h deleted +0 -413
413 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 11/28 powerpc: remove ipek01 support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/ipek01/Kconfig | 9 - board/ipek01/MAINTAINERS | 6 - board/ipek01/Makefile | 8 - board/ipek01/ipek01.c | 268 ---------------------------- configs/ipek01_defconfig | 4 - include/configs/ipek01.h | 374 --------------------------------------- 7 files changed, 673 deletions(-) delete mode 100644 board/ipek01/Kconfig delete mode 100644 board/ipek01/MAINTAINERS delete mode 100644 board/ipek01/Makefile delete mode 100644 board/ipek01/ipek01.c delete mode 100644 configs/ipek01_defconfig delete mode 100644 include/configs/ipek01.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -18,9 +18,6 @@ config TARGET_A4M072 config TARGET_CM5200 bool "Support cm5200" -config TARGET_IPEK01 - bool "Support ipek01" - config TARGET_JUPITER bool "Support jupiter"
@@ -70,7 +67,6 @@ source "board/a4m072/Kconfig" source "board/cm5200/Kconfig" source "board/ifm/o2dnt2/Kconfig" source "board/intercontrol/digsy_mtc/Kconfig" -source "board/ipek01/Kconfig" source "board/jupiter/Kconfig" source "board/motionpro/Kconfig" source "board/munices/Kconfig"
board/ipek01/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_IPEK01 - -config SYS_BOARD - default "ipek01" - -config SYS_CONFIG_NAME - default "ipek01" - -endif
board/ipek01/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -IPEK01 BOARD -M: Wolfgang Grandegger <[email protected]> -S: Maintained -F: board/ipek01/ -F: include/configs/ipek01.h -F: configs/ipek01_defconfig
board/ipek01/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := ipek01.o
board/ipek01/ipek01.c deleted +0 -268
268 lines not on this page · raw message
configs/ipek01_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_IPEK01=y -# CONFIG_CMD_SETEXPR is not set
include/configs/ipek01.h deleted +0 -374
374 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 11/28 powerpc: remove ipek01 support
Hi,
Quoted 2 lines · On Thu, 13 Aug 2015 19:15:29 +0900 Masahiro Yamada…
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
I'll submit conversion patch for this board today.
Thanks,
Anatolij
RFC PATCH 12/28 powerpc: remove jupiter support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/jupiter/Kconfig | 9 -- board/jupiter/MAINTAINERS | 6 - board/jupiter/Makefile | 8 -- board/jupiter/jupiter.c | 292 --------------------------------------- configs/jupiter_defconfig | 4 - include/configs/jupiter.h | 282 ------------------------------------- 7 files changed, 605 deletions(-) delete mode 100644 board/jupiter/Kconfig delete mode 100644 board/jupiter/MAINTAINERS delete mode 100644 board/jupiter/Makefile delete mode 100644 board/jupiter/jupiter.c delete mode 100644 configs/jupiter_defconfig delete mode 100644 include/configs/jupiter.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -18,9 +18,6 @@ config TARGET_A4M072 config TARGET_CM5200 bool "Support cm5200" -config TARGET_JUPITER - bool "Support jupiter" - config TARGET_MOTIONPRO bool "Support motionpro"
@@ -67,7 +64,6 @@ source "board/a4m072/Kconfig" source "board/cm5200/Kconfig" source "board/ifm/o2dnt2/Kconfig" source "board/intercontrol/digsy_mtc/Kconfig" -source "board/jupiter/Kconfig" source "board/motionpro/Kconfig" source "board/munices/Kconfig" source "board/phytec/pcm030/Kconfig"
board/jupiter/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_JUPITER - -config SYS_BOARD - default "jupiter" - -config SYS_CONFIG_NAME - default "jupiter" - -endif
board/jupiter/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -JUPITER BOARD -M: Heiko Schocher <[email protected]> -S: Maintained -F: board/jupiter/ -F: include/configs/jupiter.h -F: configs/jupiter_defconfig
board/jupiter/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := jupiter.o
board/jupiter/jupiter.c deleted +0 -292
292 lines not on this page · raw message
configs/jupiter_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_JUPITER=y -# CONFIG_CMD_SETEXPR is not set
include/configs/jupiter.h deleted +0 -282
282 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 13/28 powerpc: remove motionpro support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/motionpro/Kconfig | 9 - board/motionpro/MAINTAINERS | 6 - board/motionpro/Makefile | 8 - board/motionpro/motionpro.c | 220 ---------------------- configs/motionpro_defconfig | 7 - include/configs/motionpro.h | 390 --------------------------------------- 7 files changed, 644 deletions(-) delete mode 100644 board/motionpro/Kconfig delete mode 100644 board/motionpro/MAINTAINERS delete mode 100644 board/motionpro/Makefile delete mode 100644 board/motionpro/motionpro.c delete mode 100644 configs/motionpro_defconfig delete mode 100644 include/configs/motionpro.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -18,9 +18,6 @@ config TARGET_A4M072 config TARGET_CM5200 bool "Support cm5200" -config TARGET_MOTIONPRO - bool "Support motionpro" - config TARGET_MUNICES bool "Support munices"
@@ -64,7 +61,6 @@ source "board/a4m072/Kconfig" source "board/cm5200/Kconfig" source "board/ifm/o2dnt2/Kconfig" source "board/intercontrol/digsy_mtc/Kconfig" -source "board/motionpro/Kconfig" source "board/munices/Kconfig" source "board/phytec/pcm030/Kconfig" source "board/tqc/tqm5200/Kconfig"
board/motionpro/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_MOTIONPRO - -config SYS_BOARD - default "motionpro" - -config SYS_CONFIG_NAME - default "motionpro" - -endif
board/motionpro/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MOTIONPRO BOARD -#M: - -S: Maintained -F: board/motionpro/ -F: include/configs/motionpro.h -F: configs/motionpro_defconfig
board/motionpro/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2007 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := motionpro.o
board/motionpro/motionpro.c deleted +0 -220
220 lines not on this page · raw message
configs/motionpro_defconfig deleted +0 -7
@@ -1,7 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_MOTIONPRO=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n" -CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -# CONFIG_CMD_SETEXPR is not set
include/configs/motionpro.h deleted +0 -390
390 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 14/28 powerpc: remove munices support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/munices/Kconfig | 9 -- board/munices/MAINTAINERS | 6 -- board/munices/Makefile | 8 -- board/munices/mt48lc16m16a2-75.h | 14 --- board/munices/munices.c | 155 ------------------------------ configs/munices_defconfig | 4 - include/configs/munices.h | 197 --------------------------------------- 8 files changed, 397 deletions(-) delete mode 100644 board/munices/Kconfig delete mode 100644 board/munices/MAINTAINERS delete mode 100644 board/munices/Makefile delete mode 100644 board/munices/mt48lc16m16a2-75.h delete mode 100644 board/munices/munices.c delete mode 100644 configs/munices_defconfig delete mode 100644 include/configs/munices.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -18,9 +18,6 @@ config TARGET_A4M072 config TARGET_CM5200 bool "Support cm5200" -config TARGET_MUNICES - bool "Support munices" - config TARGET_V38B bool "Support v38b"
@@ -61,7 +58,6 @@ source "board/a4m072/Kconfig" source "board/cm5200/Kconfig" source "board/ifm/o2dnt2/Kconfig" source "board/intercontrol/digsy_mtc/Kconfig" -source "board/munices/Kconfig" source "board/phytec/pcm030/Kconfig" source "board/tqc/tqm5200/Kconfig" source "board/v38b/Kconfig"
board/munices/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_MUNICES - -config SYS_BOARD - default "munices" - -config SYS_CONFIG_NAME - default "munices" - -endif
board/munices/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MUNICES BOARD -#M: - -S: Maintained -F: board/munices/ -F: include/configs/munices.h -F: configs/munices_defconfig
board/munices/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := munices.o
board/munices/mt48lc16m16a2-75.h deleted +0 -14
@@ -1,14 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 0/* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000
board/munices/munices.c deleted +0 -155
155 lines not on this page · raw message
configs/munices_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_MUNICES=y -# CONFIG_CMD_SETEXPR is not set
include/configs/munices.h deleted +0 -197
197 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 15/28 powerpc: remove pcm030 support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/phytec/pcm030/Kconfig | 12 - board/phytec/pcm030/MAINTAINERS | 7 - board/phytec/pcm030/Makefile | 8 - board/phytec/pcm030/README | 42 ---- board/phytec/pcm030/mt46v32m16-75.h | 21 -- board/phytec/pcm030/pcm030.c | 205 ----------------- configs/pcm030_LOWBOOT_defconfig | 5 - configs/pcm030_defconfig | 4 - include/configs/pcm030.h | 430 ------------------------------------ 10 files changed, 738 deletions(-) delete mode 100644 board/phytec/pcm030/Kconfig delete mode 100644 board/phytec/pcm030/MAINTAINERS delete mode 100644 board/phytec/pcm030/Makefile delete mode 100644 board/phytec/pcm030/README delete mode 100644 board/phytec/pcm030/mt46v32m16-75.h delete mode 100644 board/phytec/pcm030/pcm030.c delete mode 100644 configs/pcm030_LOWBOOT_defconfig delete mode 100644 configs/pcm030_defconfig delete mode 100644 include/configs/pcm030.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -42,9 +42,6 @@ config TARGET_O3DNT config TARGET_DIGSY_MTC bool "Support digsy_mtc" -config TARGET_PCM030 - bool "Support pcm030" - config TARGET_CHARON bool "Support charon"
@@ -58,7 +55,6 @@ source "board/a4m072/Kconfig" source "board/cm5200/Kconfig" source "board/ifm/o2dnt2/Kconfig" source "board/intercontrol/digsy_mtc/Kconfig" -source "board/phytec/pcm030/Kconfig" source "board/tqc/tqm5200/Kconfig" source "board/v38b/Kconfig"
board/phytec/pcm030/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_PCM030 - -config SYS_BOARD - default "pcm030" - -config SYS_VENDOR - default "phytec" - -config SYS_CONFIG_NAME - default "pcm030" - -endif
board/phytec/pcm030/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -PCM030 BOARD -M: Jon Smirl <[email protected]> -S: Maintained -F: board/phytec/pcm030/ -F: include/configs/pcm030.h -F: configs/pcm030_defconfig -F: configs/pcm030_LOWBOOT_defconfig
board/phytec/pcm030/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2007 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := pcm030.o
board/phytec/pcm030/README deleted +0 -42
42 lines not on this page · raw message
board/phytec/pcm030/mt46v32m16-75.h deleted +0 -21
@@ -1,21 +0,0 @@ -/* -* (C) Copyright 2004 -* Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com. -* -* Eric Schumann, Phytec Messtechnik -* adapted for mt46v32m16-75 DDR-RAM -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#define SDRAM_DDR 1/* is DDR */ - -/* Settings for XLB = 132 MHz */ - -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x71500F00 -#define SDRAM_CONFIG1 0x73711930 -#define SDRAM_CONFIG2 0x47770000 - -#define SDRAM_TAPDELAY 0x10000000/* reserved Bit in MPC5200 B3-Step */
board/phytec/pcm030/pcm030.c deleted +0 -205
205 lines not on this page · raw message
configs/pcm030_LOWBOOT_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_PCM030=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000" -# CONFIG_CMD_SETEXPR is not set
configs/pcm030_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_PCM030=y -# CONFIG_CMD_SETEXPR is not set
include/configs/pcm030.h deleted +0 -430
430 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 16/28 powerpc: remove v38b support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc5xxx/Kconfig | 4 - board/v38b/Kconfig | 9 -- board/v38b/MAINTAINERS | 6 - board/v38b/Makefile | 8 - board/v38b/ethaddr.c | 197 ----------------------- board/v38b/v38b.c | 260 ------------------------------ configs/v38b_defconfig | 4 - include/configs/v38b.h | 333 --------------------------------------- 8 files changed, 821 deletions(-) delete mode 100644 board/v38b/Kconfig delete mode 100644 board/v38b/MAINTAINERS delete mode 100644 board/v38b/Makefile delete mode 100644 board/v38b/ethaddr.c delete mode 100644 board/v38b/v38b.c delete mode 100644 configs/v38b_defconfig delete mode 100644 include/configs/v38b.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
@@ -18,9 +18,6 @@ config TARGET_A4M072 config TARGET_CM5200 bool "Support cm5200" -config TARGET_V38B - bool "Support v38b" - config TARGET_O2D bool "Support O2D"
@@ -56,6 +53,5 @@ source "board/cm5200/Kconfig" source "board/ifm/o2dnt2/Kconfig" source "board/intercontrol/digsy_mtc/Kconfig" source "board/tqc/tqm5200/Kconfig" -source "board/v38b/Kconfig" endmenu
board/v38b/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_V38B - -config SYS_BOARD - default "v38b" - -config SYS_CONFIG_NAME - default "v38b" - -endif
board/v38b/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -V38B BOARD -#M: - -S: Maintained -F: board/v38b/ -F: include/configs/v38b.h -F: configs/v38b_defconfig
board/v38b/Makefile deleted +0 -8
@@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := v38b.o ethaddr.o
board/v38b/ethaddr.c deleted +0 -197
197 lines not on this page · raw message
board/v38b/v38b.c deleted +0 -260
260 lines not on this page · raw message
configs/v38b_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_V38B=y -# CONFIG_CMD_SETEXPR is not set
include/configs/v38b.h deleted +0 -333
333 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 17/28 powerpc: remove socrates support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/socrates/Kconfig | 9 - board/socrates/MAINTAINERS | 6 - board/socrates/Makefile | 15 -- board/socrates/ddr.c | 56 ----- board/socrates/law.c | 44 ---- board/socrates/nand.c | 163 -------------- board/socrates/sdram.c | 96 --------- board/socrates/socrates.c | 434 ------------------------------------- board/socrates/tlb.c | 105 --------- board/socrates/upm_table.h | 59 ------ configs/socrates_defconfig | 5 - include/configs/socrates.h | 446 --------------------------------------- 13 files changed, 1442 deletions(-) delete mode 100644 board/socrates/Kconfig delete mode 100644 board/socrates/MAINTAINERS delete mode 100644 board/socrates/Makefile delete mode 100644 board/socrates/ddr.c delete mode 100644 board/socrates/law.c delete mode 100644 board/socrates/nand.c delete mode 100644 board/socrates/sdram.c delete mode 100644 board/socrates/socrates.c delete mode 100644 board/socrates/tlb.c delete mode 100644 board/socrates/upm_table.h delete mode 100644 configs/socrates_defconfig delete mode 100644 include/configs/socrates.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -11,9 +11,6 @@ choice config TARGET_SBC8548 bool "Support sbc8548" -config TARGET_SOCRATES - bool "Support socrates" - config TARGET_B4860QDS bool "Support B4860QDS" select SUPPORT_SPL
@@ -190,7 +187,6 @@ source "board/freescale/t4rdb/Kconfig" source "board/gdsys/p1022/Kconfig" source "board/keymile/kmp204x/Kconfig" source "board/sbc8548/Kconfig" -source "board/socrates/Kconfig" source "board/stx/stxgp3/Kconfig" source "board/stx/stxssa/Kconfig" source "board/xes/xpedite520x/Kconfig"
board/socrates/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_SOCRATES - -config SYS_BOARD - default "socrates" - -config SYS_CONFIG_NAME - default "socrates" - -endif
board/socrates/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -SOCRATES BOARD -#M: - -S: Maintained -F: board/socrates/ -F: include/configs/socrates.h -F: configs/socrates_defconfig
board/socrates/Makefile deleted +0 -15
@@ -1,15 +0,0 @@ -# -# (C) Copyright 2008 -# Sergei Poselenov, Emcraft Systems, sposelenov at emcraft.com. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += socrates.o -obj-y += law.o -obj-y += tlb.o -obj-y += nand.o -obj-y += sdram.o -obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
board/socrates/ddr.c deleted +0 -56
56 lines not on this page · raw message
board/socrates/law.c deleted +0 -44
44 lines not on this page · raw message
board/socrates/nand.c deleted +0 -163
163 lines not on this page · raw message
board/socrates/sdram.c deleted +0 -96
96 lines not on this page · raw message
board/socrates/socrates.c deleted +0 -434
434 lines not on this page · raw message
board/socrates/tlb.c deleted +0 -105
105 lines not on this page · raw message
board/socrates/upm_table.h deleted +0 -59
59 lines not on this page · raw message
configs/socrates_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_SOCRATES=y -# CONFIG_CMD_SETEXPR is not set -# CONFIG_CMD_NFS is not set
include/configs/socrates.h deleted +0 -446
446 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 17/28 powerpc: remove socrates support
Hi,
Quoted 2 lines · On Thu, 13 Aug 2015 19:15:35 +0900 Masahiro Yamada…
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
I'll submit conversion patch for this board and for some other mpc5xxx boards today.
Thanks,
Anatolij
RFC PATCH 18/28 powerpc: remove stxgp3, stxssa support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 8 - board/stx/stxgp3/Kconfig | 12 - board/stx/stxgp3/MAINTAINERS | 6 - board/stx/stxgp3/Makefile | 12 - board/stx/stxgp3/ddr.c | 46 ---- board/stx/stxgp3/flash.c | 499 --------------------------------------- board/stx/stxgp3/law.c | 42 ---- board/stx/stxgp3/stxgp3.c | 331 -------------------------- board/stx/stxgp3/tlb.c | 114 --------- board/stx/stxssa/Kconfig | 12 - board/stx/stxssa/MAINTAINERS | 7 - board/stx/stxssa/Makefile | 11 - board/stx/stxssa/ddr.c | 47 ---- board/stx/stxssa/law.c | 44 ---- board/stx/stxssa/stxssa.c | 370 ----------------------------- board/stx/stxssa/tlb.c | 90 ------- configs/stxgp3_defconfig | 4 - configs/stxssa_4M_defconfig | 5 - configs/stxssa_defconfig | 4 - include/configs/stxgp3.h | 355 ---------------------------- include/configs/stxssa.h | 441 ---------------------------------- 21 files changed, 2460 deletions(-) delete mode 100644 board/stx/stxgp3/Kconfig delete mode 100644 board/stx/stxgp3/MAINTAINERS delete mode 100644 board/stx/stxgp3/Makefile delete mode 100644 board/stx/stxgp3/ddr.c delete mode 100644 board/stx/stxgp3/flash.c delete mode 100644 board/stx/stxgp3/law.c delete mode 100644 board/stx/stxgp3/stxgp3.c delete mode 100644 board/stx/stxgp3/tlb.c delete mode 100644 board/stx/stxssa/Kconfig delete mode 100644 board/stx/stxssa/MAINTAINERS delete mode 100644 board/stx/stxssa/Makefile delete mode 100644 board/stx/stxssa/ddr.c delete mode 100644 board/stx/stxssa/law.c delete mode 100644 board/stx/stxssa/stxssa.c delete mode 100644 board/stx/stxssa/tlb.c delete mode 100644 configs/stxgp3_defconfig delete mode 100644 configs/stxssa_4M_defconfig delete mode 100644 configs/stxssa_defconfig delete mode 100644 include/configs/stxgp3.h delete mode 100644 include/configs/stxssa.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -8
@@ -134,12 +134,6 @@ config TARGET_CONTROLCENTERD config TARGET_KMP204X bool "Support kmp204x" -config TARGET_STXGP3 - bool "Support stxgp3" - -config TARGET_STXSSA - bool "Support stxssa" - config TARGET_XPEDITE520X bool "Support xpedite520x"
@@ -187,8 +181,6 @@ source "board/freescale/t4rdb/Kconfig" source "board/gdsys/p1022/Kconfig" source "board/keymile/kmp204x/Kconfig" source "board/sbc8548/Kconfig" -source "board/stx/stxgp3/Kconfig" -source "board/stx/stxssa/Kconfig" source "board/xes/xpedite520x/Kconfig" source "board/xes/xpedite537x/Kconfig" source "board/xes/xpedite550x/Kconfig"
board/stx/stxgp3/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_STXGP3 - -config SYS_BOARD - default "stxgp3" - -config SYS_VENDOR - default "stx" - -config SYS_CONFIG_NAME - default "stxgp3" - -endif
board/stx/stxgp3/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -STXGP3 BOARD -#M: Dan Malek <[email protected]> -S: Orphan (since 2014-06) -F: board/stx/stxgp3/ -F: include/configs/stxgp3.h -F: configs/stxgp3_defconfig
board/stx/stxgp3/Makefile deleted +0 -12
@@ -1,12 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += stxgp3.o -obj-y += law.o -obj-y += tlb.o -obj-y += flash.o -obj-$(CONFIG_SYS_FSL_DDR1) += ddr.o
board/stx/stxgp3/ddr.c deleted +0 -46
46 lines not on this page · raw message
board/stx/stxgp3/flash.c deleted +0 -499
499 lines not on this page · raw message
board/stx/stxgp3/law.c deleted +0 -42
42 lines not on this page · raw message
board/stx/stxgp3/stxgp3.c deleted +0 -331
331 lines not on this page · raw message
board/stx/stxgp3/tlb.c deleted +0 -114
114 lines not on this page · raw message
board/stx/stxssa/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_STXSSA - -config SYS_BOARD - default "stxssa" - -config SYS_VENDOR - default "stx" - -config SYS_CONFIG_NAME - default "stxssa" - -endif
board/stx/stxssa/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -STXSSA BOARD -#M: Dan Malek <[email protected]> -S: Orphan (since 2014-06) -F: board/stx/stxssa/ -F: include/configs/stxssa.h -F: configs/stxssa_defconfig -F: configs/stxssa_4M_defconfig
board/stx/stxssa/Makefile deleted +0 -11
@@ -1,11 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += stxssa.o -obj-y += law.o -obj-y += tlb.o -obj-$(CONFIG_SYS_FSL_DDR1) += ddr.o
board/stx/stxssa/ddr.c deleted +0 -47
47 lines not on this page · raw message
board/stx/stxssa/law.c deleted +0 -44
44 lines not on this page · raw message
board/stx/stxssa/stxssa.c deleted +0 -370
370 lines not on this page · raw message
board/stx/stxssa/tlb.c deleted +0 -90
90 lines not on this page · raw message
configs/stxgp3_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_STXGP3=y -# CONFIG_CMD_SETEXPR is not set
configs/stxssa_4M_defconfig deleted +0 -5
@@ -1,5 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_STXSSA=y -CONFIG_SYS_EXTRA_OPTIONS="STXSSA_4M" -# CONFIG_CMD_SETEXPR is not set
configs/stxssa_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_STXSSA=y -# CONFIG_CMD_SETEXPR is not set
include/configs/stxgp3.h deleted +0 -355
355 lines not on this page · raw message
include/configs/stxssa.h deleted +0 -441
441 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 19/28 powerpc: remove MPC8540ADS support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/mpc8540ads/Kconfig | 12 - board/freescale/mpc8540ads/MAINTAINERS | 6 - board/freescale/mpc8540ads/Makefile | 11 - board/freescale/mpc8540ads/ddr.c | 46 ---- board/freescale/mpc8540ads/law.c | 42 --- board/freescale/mpc8540ads/mpc8540ads.c | 242 ----------------- board/freescale/mpc8540ads/tlb.c | 95 ------- configs/MPC8540ADS_defconfig | 3 - include/configs/MPC8540ADS.h | 448 -------------------------------- 10 files changed, 909 deletions(-) delete mode 100644 board/freescale/mpc8540ads/Kconfig delete mode 100644 board/freescale/mpc8540ads/MAINTAINERS delete mode 100644 board/freescale/mpc8540ads/Makefile delete mode 100644 board/freescale/mpc8540ads/ddr.c delete mode 100644 board/freescale/mpc8540ads/law.c delete mode 100644 board/freescale/mpc8540ads/mpc8540ads.c delete mode 100644 board/freescale/mpc8540ads/tlb.c delete mode 100644 configs/MPC8540ADS_defconfig delete mode 100644 include/configs/MPC8540ADS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -43,9 +43,6 @@ config TARGET_P5040DS config TARGET_MPC8536DS bool "Support MPC8536DS" -config TARGET_MPC8540ADS - bool "Support MPC8540ADS" - config TARGET_MPC8541CDS bool "Support MPC8541CDS"
@@ -154,7 +151,6 @@ source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" -source "board/freescale/mpc8540ads/Kconfig" source "board/freescale/mpc8541cds/Kconfig" source "board/freescale/mpc8544ds/Kconfig" source "board/freescale/mpc8548cds/Kconfig"
board/freescale/mpc8540ads/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8540ADS - -config SYS_BOARD - default "mpc8540ads" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8540ADS" - -endif
board/freescale/mpc8540ads/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MPC8540ADS BOARD -#M: Kumar Gala <[email protected]> -S: Orphan (since 2014-06) -F: board/freescale/mpc8540ads/ -F: include/configs/MPC8540ADS.h -F: configs/MPC8540ADS_defconfig
board/freescale/mpc8540ads/Makefile deleted +0 -11
@@ -1,11 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8540ads.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/mpc8540ads/ddr.c deleted +0 -46
46 lines not on this page · raw message
board/freescale/mpc8540ads/law.c deleted +0 -42
42 lines not on this page · raw message
board/freescale/mpc8540ads/mpc8540ads.c deleted +0 -242
242 lines not on this page · raw message
board/freescale/mpc8540ads/tlb.c deleted +0 -95
95 lines not on this page · raw message
configs/MPC8540ADS_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8540ADS=y
include/configs/MPC8540ADS.h deleted +0 -448
448 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 20/28 powerpc: remove MPC8541CDS support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/mpc8541cds/Kconfig | 12 - board/freescale/mpc8541cds/MAINTAINERS | 7 - board/freescale/mpc8541cds/Makefile | 12 - board/freescale/mpc8541cds/ddr.c | 56 ---- board/freescale/mpc8541cds/law.c | 42 --- board/freescale/mpc8541cds/mpc8541cds.c | 427 ----------------------------- board/freescale/mpc8541cds/tlb.c | 96 ------- configs/MPC8541CDS_defconfig | 3 - configs/MPC8541CDS_legacy_defconfig | 4 - include/configs/MPC8541CDS.h | 465 -------------------------------- 11 files changed, 1128 deletions(-) delete mode 100644 board/freescale/mpc8541cds/Kconfig delete mode 100644 board/freescale/mpc8541cds/MAINTAINERS delete mode 100644 board/freescale/mpc8541cds/Makefile delete mode 100644 board/freescale/mpc8541cds/ddr.c delete mode 100644 board/freescale/mpc8541cds/law.c delete mode 100644 board/freescale/mpc8541cds/mpc8541cds.c delete mode 100644 board/freescale/mpc8541cds/tlb.c delete mode 100644 configs/MPC8541CDS_defconfig delete mode 100644 configs/MPC8541CDS_legacy_defconfig delete mode 100644 include/configs/MPC8541CDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -43,9 +43,6 @@ config TARGET_P5040DS config TARGET_MPC8536DS bool "Support MPC8536DS" -config TARGET_MPC8541CDS - bool "Support MPC8541CDS" - config TARGET_MPC8544DS bool "Support MPC8544DS"
@@ -151,7 +148,6 @@ source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" -source "board/freescale/mpc8541cds/Kconfig" source "board/freescale/mpc8544ds/Kconfig" source "board/freescale/mpc8548cds/Kconfig" source "board/freescale/mpc8555cds/Kconfig"
board/freescale/mpc8541cds/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8541CDS - -config SYS_BOARD - default "mpc8541cds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8541CDS" - -endif
board/freescale/mpc8541cds/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -MPC8541CDS BOARD -#M: Kumar Gala <[email protected]> -S: Orphan (since 2014-06) -F: board/freescale/mpc8541cds/ -F: include/configs/MPC8541CDS.h -F: configs/MPC8541CDS_defconfig -F: configs/MPC8541CDS_legacy_defconfig
board/freescale/mpc8541cds/Makefile deleted +0 -12
@@ -1,12 +0,0 @@ -# -# Copyright 2004 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8541cds.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/mpc8541cds/ddr.c deleted +0 -56
56 lines not on this page · raw message
board/freescale/mpc8541cds/law.c deleted +0 -42
42 lines not on this page · raw message
board/freescale/mpc8541cds/mpc8541cds.c deleted +0 -427
427 lines not on this page · raw message
board/freescale/mpc8541cds/tlb.c deleted +0 -96
96 lines not on this page · raw message
configs/MPC8541CDS_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8541CDS=y
configs/MPC8541CDS_legacy_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8541CDS=y -CONFIG_SYS_EXTRA_OPTIONS="LEGACY"
include/configs/MPC8541CDS.h deleted +0 -465
465 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 21/28 powerpc: remove MPC8544DS support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/mpc8544ds/Kconfig | 12 - board/freescale/mpc8544ds/MAINTAINERS | 6 - board/freescale/mpc8544ds/Makefile | 12 - board/freescale/mpc8544ds/README | 122 -------- board/freescale/mpc8544ds/ddr.c | 59 ---- board/freescale/mpc8544ds/law.c | 18 -- board/freescale/mpc8544ds/mpc8544ds.c | 320 --------------------- board/freescale/mpc8544ds/tlb.c | 75 ----- configs/MPC8544DS_defconfig | 3 - include/configs/MPC8544DS.h | 514 ---------------------------------- 11 files changed, 1145 deletions(-) delete mode 100644 board/freescale/mpc8544ds/Kconfig delete mode 100644 board/freescale/mpc8544ds/MAINTAINERS delete mode 100644 board/freescale/mpc8544ds/Makefile delete mode 100644 board/freescale/mpc8544ds/README delete mode 100644 board/freescale/mpc8544ds/ddr.c delete mode 100644 board/freescale/mpc8544ds/law.c delete mode 100644 board/freescale/mpc8544ds/mpc8544ds.c delete mode 100644 board/freescale/mpc8544ds/tlb.c delete mode 100644 configs/MPC8544DS_defconfig delete mode 100644 include/configs/MPC8544DS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -43,9 +43,6 @@ config TARGET_P5040DS config TARGET_MPC8536DS bool "Support MPC8536DS" -config TARGET_MPC8544DS - bool "Support MPC8544DS" - config TARGET_MPC8548CDS bool "Support MPC8548CDS"
@@ -148,7 +145,6 @@ source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" -source "board/freescale/mpc8544ds/Kconfig" source "board/freescale/mpc8548cds/Kconfig" source "board/freescale/mpc8555cds/Kconfig" source "board/freescale/mpc8560ads/Kconfig"
board/freescale/mpc8544ds/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8544DS - -config SYS_BOARD - default "mpc8544ds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8544DS" - -endif
board/freescale/mpc8544ds/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MPC8544DS BOARD -#M: - -S: Maintained -F: board/freescale/mpc8544ds/ -F: include/configs/MPC8544DS.h -F: configs/MPC8544DS_defconfig
board/freescale/mpc8544ds/Makefile deleted +0 -12
@@ -1,12 +0,0 @@ -# -# Copyright 2007 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8544ds.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/mpc8544ds/README deleted +0 -122
122 lines not on this page · raw message
board/freescale/mpc8544ds/ddr.c deleted +0 -59
59 lines not on this page · raw message
board/freescale/mpc8544ds/law.c deleted +0 -18
@@ -1,18 +0,0 @@ -/* -* Copyright 2008, 2010 Freescale Semiconductor, Inc. -* -* (C) Copyright 2000 -* Wolfgang Denk, DENX Software Engineering, wd at denx.de. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { -SET_LAW (CONFIG_SYS_LBC_NONCACHE_BASE ,LAW_SIZE_128M ,LAW_TRGT_IF_LBC ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);
board/freescale/mpc8544ds/mpc8544ds.c deleted +0 -320
320 lines not on this page · raw message
board/freescale/mpc8544ds/tlb.c deleted +0 -75
75 lines not on this page · raw message
configs/MPC8544DS_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8544DS=y
include/configs/MPC8544DS.h deleted +0 -514
514 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 22/28 powerpc: remove MPC8548CDS support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/mpc8548cds/Kconfig | 12 - board/freescale/mpc8548cds/MAINTAINERS | 8 - board/freescale/mpc8548cds/Makefile | 12 - board/freescale/mpc8548cds/ddr.c | 56 --- board/freescale/mpc8548cds/law.c | 19 - board/freescale/mpc8548cds/mpc8548cds.c | 358 ------------------- board/freescale/mpc8548cds/tlb.c | 87 ----- configs/MPC8548CDS_36BIT_defconfig | 4 - configs/MPC8548CDS_defconfig | 3 - configs/MPC8548CDS_legacy_defconfig | 4 - include/configs/MPC8548CDS.h | 605 -------------------------------- 12 files changed, 1172 deletions(-) delete mode 100644 board/freescale/mpc8548cds/Kconfig delete mode 100644 board/freescale/mpc8548cds/MAINTAINERS delete mode 100644 board/freescale/mpc8548cds/Makefile delete mode 100644 board/freescale/mpc8548cds/ddr.c delete mode 100644 board/freescale/mpc8548cds/law.c delete mode 100644 board/freescale/mpc8548cds/mpc8548cds.c delete mode 100644 board/freescale/mpc8548cds/tlb.c delete mode 100644 configs/MPC8548CDS_36BIT_defconfig delete mode 100644 configs/MPC8548CDS_defconfig delete mode 100644 configs/MPC8548CDS_legacy_defconfig delete mode 100644 include/configs/MPC8548CDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -43,9 +43,6 @@ config TARGET_P5040DS config TARGET_MPC8536DS bool "Support MPC8536DS" -config TARGET_MPC8548CDS - bool "Support MPC8548CDS" - config TARGET_MPC8555CDS bool "Support MPC8555CDS"
@@ -145,7 +142,6 @@ source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" -source "board/freescale/mpc8548cds/Kconfig" source "board/freescale/mpc8555cds/Kconfig" source "board/freescale/mpc8560ads/Kconfig" source "board/freescale/mpc8568mds/Kconfig"
board/freescale/mpc8548cds/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8548CDS - -config SYS_BOARD - default "mpc8548cds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8548CDS" - -endif
board/freescale/mpc8548cds/MAINTAINERS deleted +0 -8
@@ -1,8 +0,0 @@ -MPC8548CDS BOARD -#M: - -S: Maintained -F: board/freescale/mpc8548cds/ -F: include/configs/MPC8548CDS.h -F: configs/MPC8548CDS_defconfig -F: configs/MPC8548CDS_36BIT_defconfig -F: configs/MPC8548CDS_legacy_defconfig
board/freescale/mpc8548cds/Makefile deleted +0 -12
@@ -1,12 +0,0 @@ -# -# Copyright 2004 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8548cds.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/mpc8548cds/ddr.c deleted +0 -56
56 lines not on this page · raw message
board/freescale/mpc8548cds/law.c deleted +0 -19
@@ -1,19 +0,0 @@ -/* -* Copyright 2008,2010-2011 Freescale Semiconductor, Inc. -* -* (C) Copyright 2000 -* Wolfgang Denk, DENX Software Engineering, wd at denx.de. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { -/* LBC window - maps 256M */ -SET_LAW (CONFIG_SYS_LBC_SDRAM_BASE_PHYS ,LAW_SIZE_256M ,LAW_TRGT_IF_LBC ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);
board/freescale/mpc8548cds/mpc8548cds.c deleted +0 -358
358 lines not on this page · raw message
board/freescale/mpc8548cds/tlb.c deleted +0 -87
87 lines not on this page · raw message
configs/MPC8548CDS_36BIT_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8548CDS=y -CONFIG_SYS_EXTRA_OPTIONS="36BIT"
configs/MPC8548CDS_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8548CDS=y
configs/MPC8548CDS_legacy_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8548CDS=y -CONFIG_SYS_EXTRA_OPTIONS="LEGACY"
include/configs/MPC8548CDS.h deleted +0 -605
605 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 23/28 powerpc: remove MPC8555CDS support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/mpc8555cds/Kconfig | 12 - board/freescale/mpc8555cds/MAINTAINERS | 7 - board/freescale/mpc8555cds/Makefile | 12 - board/freescale/mpc8555cds/ddr.c | 56 ---- board/freescale/mpc8555cds/law.c | 42 --- board/freescale/mpc8555cds/mpc8555cds.c | 428 ----------------------------- board/freescale/mpc8555cds/tlb.c | 96 ------- configs/MPC8555CDS_defconfig | 3 - configs/MPC8555CDS_legacy_defconfig | 4 - include/configs/MPC8555CDS.h | 461 -------------------------------- 11 files changed, 1125 deletions(-) delete mode 100644 board/freescale/mpc8555cds/Kconfig delete mode 100644 board/freescale/mpc8555cds/MAINTAINERS delete mode 100644 board/freescale/mpc8555cds/Makefile delete mode 100644 board/freescale/mpc8555cds/ddr.c delete mode 100644 board/freescale/mpc8555cds/law.c delete mode 100644 board/freescale/mpc8555cds/mpc8555cds.c delete mode 100644 board/freescale/mpc8555cds/tlb.c delete mode 100644 configs/MPC8555CDS_defconfig delete mode 100644 configs/MPC8555CDS_legacy_defconfig delete mode 100644 include/configs/MPC8555CDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -43,9 +43,6 @@ config TARGET_P5040DS config TARGET_MPC8536DS bool "Support MPC8536DS" -config TARGET_MPC8555CDS - bool "Support MPC8555CDS" - config TARGET_MPC8560ADS bool "Support MPC8560ADS"
@@ -142,7 +139,6 @@ source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" -source "board/freescale/mpc8555cds/Kconfig" source "board/freescale/mpc8560ads/Kconfig" source "board/freescale/mpc8568mds/Kconfig" source "board/freescale/mpc8569mds/Kconfig"
board/freescale/mpc8555cds/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8555CDS - -config SYS_BOARD - default "mpc8555cds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8555CDS" - -endif
board/freescale/mpc8555cds/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -MPC8555CDS BOARD -#M: Kumar Gala <[email protected]> -S: Orphan (since 2014-06) -F: board/freescale/mpc8555cds/ -F: include/configs/MPC8555CDS.h -F: configs/MPC8555CDS_defconfig -F: configs/MPC8555CDS_legacy_defconfig
board/freescale/mpc8555cds/Makefile deleted +0 -12
@@ -1,12 +0,0 @@ -# -# Copyright 2004 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8555cds.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/mpc8555cds/ddr.c deleted +0 -56
56 lines not on this page · raw message
board/freescale/mpc8555cds/law.c deleted +0 -42
42 lines not on this page · raw message
board/freescale/mpc8555cds/mpc8555cds.c deleted +0 -428
428 lines not on this page · raw message
board/freescale/mpc8555cds/tlb.c deleted +0 -96
96 lines not on this page · raw message
configs/MPC8555CDS_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8555CDS=y
configs/MPC8555CDS_legacy_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8555CDS=y -CONFIG_SYS_EXTRA_OPTIONS="LEGACY"
include/configs/MPC8555CDS.h deleted +0 -461
461 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 24/28 powerpc: remove MPC8560ADS support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/mpc8560ads/Kconfig | 12 - board/freescale/mpc8560ads/MAINTAINERS | 6 - board/freescale/mpc8560ads/Makefile | 11 - board/freescale/mpc8560ads/ddr.c | 46 --- board/freescale/mpc8560ads/law.c | 42 --- board/freescale/mpc8560ads/mpc8560ads.c | 462 ------------------------------ board/freescale/mpc8560ads/tlb.c | 95 ------- configs/MPC8560ADS_defconfig | 3 - include/configs/MPC8560ADS.h | 488 -------------------------------- 10 files changed, 1169 deletions(-) delete mode 100644 board/freescale/mpc8560ads/Kconfig delete mode 100644 board/freescale/mpc8560ads/MAINTAINERS delete mode 100644 board/freescale/mpc8560ads/Makefile delete mode 100644 board/freescale/mpc8560ads/ddr.c delete mode 100644 board/freescale/mpc8560ads/law.c delete mode 100644 board/freescale/mpc8560ads/mpc8560ads.c delete mode 100644 board/freescale/mpc8560ads/tlb.c delete mode 100644 configs/MPC8560ADS_defconfig delete mode 100644 include/configs/MPC8560ADS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -43,9 +43,6 @@ config TARGET_P5040DS config TARGET_MPC8536DS bool "Support MPC8536DS" -config TARGET_MPC8560ADS - bool "Support MPC8560ADS" - config TARGET_MPC8568MDS bool "Support MPC8568MDS"
@@ -139,7 +136,6 @@ source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" -source "board/freescale/mpc8560ads/Kconfig" source "board/freescale/mpc8568mds/Kconfig" source "board/freescale/mpc8569mds/Kconfig" source "board/freescale/mpc8572ds/Kconfig"
board/freescale/mpc8560ads/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8560ADS - -config SYS_BOARD - default "mpc8560ads" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8560ADS" - -endif
board/freescale/mpc8560ads/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MPC8560ADS BOARD -#M: Kumar Gala <[email protected]> -S: Orphan (since 2014-06) -F: board/freescale/mpc8560ads/ -F: include/configs/MPC8560ADS.h -F: configs/MPC8560ADS_defconfig
board/freescale/mpc8560ads/Makefile deleted +0 -11
@@ -1,11 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8560ads.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/mpc8560ads/ddr.c deleted +0 -46
46 lines not on this page · raw message
board/freescale/mpc8560ads/law.c deleted +0 -42
42 lines not on this page · raw message
board/freescale/mpc8560ads/mpc8560ads.c deleted +0 -462
462 lines not on this page · raw message
board/freescale/mpc8560ads/tlb.c deleted +0 -95
95 lines not on this page · raw message
configs/MPC8560ADS_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8560ADS=y
include/configs/MPC8560ADS.h deleted +0 -488
488 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 25/28 powerpc: remove MPC8568MDS support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/mpc8568mds/Kconfig | 12 - board/freescale/mpc8568mds/MAINTAINERS | 6 - board/freescale/mpc8568mds/Makefile | 13 - board/freescale/mpc8568mds/bcsr.c | 61 ---- board/freescale/mpc8568mds/bcsr.h | 93 ------ board/freescale/mpc8568mds/ddr.c | 56 ---- board/freescale/mpc8568mds/law.c | 41 --- board/freescale/mpc8568mds/mpc8568mds.c | 356 ----------------------- board/freescale/mpc8568mds/tlb.c | 84 ------ configs/MPC8568MDS_defconfig | 3 - include/configs/MPC8568MDS.h | 490 -------------------------------- 12 files changed, 1219 deletions(-) delete mode 100644 board/freescale/mpc8568mds/Kconfig delete mode 100644 board/freescale/mpc8568mds/MAINTAINERS delete mode 100644 board/freescale/mpc8568mds/Makefile delete mode 100644 board/freescale/mpc8568mds/bcsr.c delete mode 100644 board/freescale/mpc8568mds/bcsr.h delete mode 100644 board/freescale/mpc8568mds/ddr.c delete mode 100644 board/freescale/mpc8568mds/law.c delete mode 100644 board/freescale/mpc8568mds/mpc8568mds.c delete mode 100644 board/freescale/mpc8568mds/tlb.c delete mode 100644 configs/MPC8568MDS_defconfig delete mode 100644 include/configs/MPC8568MDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -43,9 +43,6 @@ config TARGET_P5040DS config TARGET_MPC8536DS bool "Support MPC8536DS" -config TARGET_MPC8568MDS - bool "Support MPC8568MDS" - config TARGET_MPC8569MDS bool "Support MPC8569MDS"
@@ -136,7 +133,6 @@ source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" -source "board/freescale/mpc8568mds/Kconfig" source "board/freescale/mpc8569mds/Kconfig" source "board/freescale/mpc8572ds/Kconfig" source "board/freescale/p1010rdb/Kconfig"
board/freescale/mpc8568mds/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8568MDS - -config SYS_BOARD - default "mpc8568mds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8568MDS" - -endif
board/freescale/mpc8568mds/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MPC8568MDS BOARD -#M: - -S: Maintained -F: board/freescale/mpc8568mds/ -F: include/configs/MPC8568MDS.h -F: configs/MPC8568MDS_defconfig
board/freescale/mpc8568mds/Makefile deleted +0 -13
@@ -1,13 +0,0 @@ -# -# Copyright 2004-2007 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8568mds.o -obj-y += bcsr.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/mpc8568mds/bcsr.c deleted +0 -61
61 lines not on this page · raw message
board/freescale/mpc8568mds/bcsr.h deleted +0 -93
93 lines not on this page · raw message
board/freescale/mpc8568mds/ddr.c deleted +0 -56
56 lines not on this page · raw message
board/freescale/mpc8568mds/law.c deleted +0 -41
41 lines not on this page · raw message
board/freescale/mpc8568mds/mpc8568mds.c deleted +0 -356
356 lines not on this page · raw message
board/freescale/mpc8568mds/tlb.c deleted +0 -84
84 lines not on this page · raw message
configs/MPC8568MDS_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8568MDS=y
include/configs/MPC8568MDS.h deleted +0 -490
490 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 26/28 powerpc: remove MPC8569MDS support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc85xx/Kconfig | 4 - board/freescale/mpc8569mds/Kconfig | 12 - board/freescale/mpc8569mds/MAINTAINERS | 7 - board/freescale/mpc8569mds/Makefile | 13 - board/freescale/mpc8569mds/README | 77 ----- board/freescale/mpc8569mds/bcsr.c | 50 --- board/freescale/mpc8569mds/bcsr.h | 72 ---- board/freescale/mpc8569mds/ddr.c | 66 ---- board/freescale/mpc8569mds/law.c | 41 --- board/freescale/mpc8569mds/mpc8569mds.c | 585 -------------------------------- board/freescale/mpc8569mds/tlb.c | 95 ------ configs/MPC8569MDS_ATM_defconfig | 4 - configs/MPC8569MDS_defconfig | 3 - include/configs/MPC8569MDS.h | 583 ------------------------------- 14 files changed, 1612 deletions(-) delete mode 100644 board/freescale/mpc8569mds/Kconfig delete mode 100644 board/freescale/mpc8569mds/MAINTAINERS delete mode 100644 board/freescale/mpc8569mds/Makefile delete mode 100644 board/freescale/mpc8569mds/README delete mode 100644 board/freescale/mpc8569mds/bcsr.c delete mode 100644 board/freescale/mpc8569mds/bcsr.h delete mode 100644 board/freescale/mpc8569mds/ddr.c delete mode 100644 board/freescale/mpc8569mds/law.c delete mode 100644 board/freescale/mpc8569mds/mpc8569mds.c delete mode 100644 board/freescale/mpc8569mds/tlb.c delete mode 100644 configs/MPC8569MDS_ATM_defconfig delete mode 100644 configs/MPC8569MDS_defconfig delete mode 100644 include/configs/MPC8569MDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
@@ -43,9 +43,6 @@ config TARGET_P5040DS config TARGET_MPC8536DS bool "Support MPC8536DS" -config TARGET_MPC8569MDS - bool "Support MPC8569MDS" - config TARGET_MPC8572DS bool "Support MPC8572DS"
@@ -133,7 +130,6 @@ source "board/freescale/bsc9132qds/Kconfig" source "board/freescale/c29xpcie/Kconfig" source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8536ds/Kconfig" -source "board/freescale/mpc8569mds/Kconfig" source "board/freescale/mpc8572ds/Kconfig" source "board/freescale/p1010rdb/Kconfig" source "board/freescale/p1022ds/Kconfig"
board/freescale/mpc8569mds/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8569MDS - -config SYS_BOARD - default "mpc8569mds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8569MDS" - -endif
board/freescale/mpc8569mds/MAINTAINERS deleted +0 -7
@@ -1,7 +0,0 @@ -MPC8569MDS BOARD -#M: - -S: Maintained -F: board/freescale/mpc8569mds/ -F: include/configs/MPC8569MDS.h -F: configs/MPC8569MDS_defconfig -F: configs/MPC8569MDS_ATM_defconfig
board/freescale/mpc8569mds/Makefile deleted +0 -13
@@ -1,13 +0,0 @@ -# -# Copyright 2004-2009 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8569mds.o -obj-y += bcsr.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o
board/freescale/mpc8569mds/README deleted +0 -77
77 lines not on this page · raw message
board/freescale/mpc8569mds/bcsr.c deleted +0 -50
50 lines not on this page · raw message
board/freescale/mpc8569mds/bcsr.h deleted +0 -72
72 lines not on this page · raw message
board/freescale/mpc8569mds/ddr.c deleted +0 -66
66 lines not on this page · raw message
board/freescale/mpc8569mds/law.c deleted +0 -41
41 lines not on this page · raw message
board/freescale/mpc8569mds/mpc8569mds.c deleted +0 -585
585 lines not on this page · raw message
board/freescale/mpc8569mds/tlb.c deleted +0 -95
95 lines not on this page · raw message
configs/MPC8569MDS_ATM_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8569MDS=y -CONFIG_SYS_EXTRA_OPTIONS="ATM"
configs/MPC8569MDS_defconfig deleted +0 -3
@@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC85xx=y -CONFIG_TARGET_MPC8569MDS=y
include/configs/MPC8569MDS.h deleted +0 -583
583 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 27/28 powerpc: remove MPC8610HPCD support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc86xx/Kconfig | 4 - board/freescale/mpc8610hpcd/Kconfig | 12 - board/freescale/mpc8610hpcd/MAINTAINERS | 6 - board/freescale/mpc8610hpcd/Makefile | 9 - board/freescale/mpc8610hpcd/README | 73 --- board/freescale/mpc8610hpcd/ddr.c | 59 --- board/freescale/mpc8610hpcd/law.c | 22 - board/freescale/mpc8610hpcd/mpc8610hpcd.c | 329 ------------- board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c | 71 --- configs/MPC8610HPCD_defconfig | 4 - include/configs/MPC8610HPCD.h | 666 -------------------------- 11 files changed, 1255 deletions(-) delete mode 100644 board/freescale/mpc8610hpcd/Kconfig delete mode 100644 board/freescale/mpc8610hpcd/MAINTAINERS delete mode 100644 board/freescale/mpc8610hpcd/Makefile delete mode 100644 board/freescale/mpc8610hpcd/README delete mode 100644 board/freescale/mpc8610hpcd/ddr.c delete mode 100644 board/freescale/mpc8610hpcd/law.c delete mode 100644 board/freescale/mpc8610hpcd/mpc8610hpcd.c delete mode 100644 board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c delete mode 100644 configs/MPC8610HPCD_defconfig delete mode 100644 include/configs/MPC8610HPCD.h
arch/powerpc/cpu/mpc86xx/Kconfig +0 -4
@@ -11,9 +11,6 @@ choice config TARGET_SBC8641D bool "Support sbc8641d" -config TARGET_MPC8610HPCD - bool "Support MPC8610HPCD" - config TARGET_MPC8641HPCN bool "Support MPC8641HPCN"
@@ -22,7 +19,6 @@ config TARGET_XPEDITE517X endchoice -source "board/freescale/mpc8610hpcd/Kconfig" source "board/freescale/mpc8641hpcn/Kconfig" source "board/sbc8641d/Kconfig" source "board/xes/xpedite517x/Kconfig"
board/freescale/mpc8610hpcd/Kconfig deleted +0 -12
@@ -1,12 +0,0 @@ -if TARGET_MPC8610HPCD - -config SYS_BOARD - default "mpc8610hpcd" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "MPC8610HPCD" - -endif
board/freescale/mpc8610hpcd/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MPC8610HPCD BOARD -#M: - -S: Maintained -F: board/freescale/mpc8610hpcd/ -F: include/configs/MPC8610HPCD.h -F: configs/MPC8610HPCD_defconfig
board/freescale/mpc8610hpcd/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# Copyright 2007 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mpc8610hpcd.o -obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o -obj-y += law.o -obj-$(CONFIG_FSL_DIU_FB) += mpc8610hpcd_diu.o
board/freescale/mpc8610hpcd/README deleted +0 -73
73 lines not on this page · raw message
board/freescale/mpc8610hpcd/ddr.c deleted +0 -59
59 lines not on this page · raw message
board/freescale/mpc8610hpcd/law.c deleted +0 -22
@@ -1,22 +0,0 @@ -/* -* Copyright 2008,2010 Freescale Semiconductor, Inc. -* -* (C) Copyright 2000 -* Wolfgang Denk, DENX Software Engineering, wd at denx.de. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { -#if !defined(CONFIG_SPD_EEPROM) -SET_LAW (CONFIG_SYS_DDR_SDRAM_BASE ,LAW_SIZE_512M ,LAW_TRGT_IF_DDR_1 ), -#endif -SET_LAW (PIXIS_BASE ,LAW_SIZE_2M ,LAW_TRGT_IF_LBC ), -SET_LAW (CONFIG_SYS_FLASH_BASE ,LAW_SIZE_256M ,LAW_TRGT_IF_LBC ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);
board/freescale/mpc8610hpcd/mpc8610hpcd.c deleted +0 -329
329 lines not on this page · raw message
board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c deleted +0 -71
71 lines not on this page · raw message
configs/MPC8610HPCD_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC86xx=y -CONFIG_TARGET_MPC8610HPCD=y -# CONFIG_CMD_SETEXPR is not set
include/configs/MPC8610HPCD.h deleted +0 -666
666 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 27/28 powerpc: remove MPC8610HPCD support
Quoted 5 lines · Masahiro Yamada
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
Signed-off-by Masahiro Yamada <[email protected]>---
Please give me a day or two to confirm with internal teams to see if there is any need to maintain these boards.
York
RFC PATCH 27/28 powerpc: remove MPC8610HPCD support
Quoted 10 lines · York Sun
Quoted 4 lines · Masahiro Yamada
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
Signed-off-by Masahiro Yamada <[email protected]>Please give me a day or two to confirm with internal teams to see if there is any need to maintain these boards.
Two weeks. You have two weeks :)
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150813/862ce2a5/attachment.sig>
RFC PATCH 28/28 powerpc: remove sbc8641d support
In reply to Masahiro YamadaThis has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
---
arch/powerpc/cpu/mpc86xx/Kconfig | 4 - board/sbc8641d/Kconfig | 9 - board/sbc8641d/MAINTAINERS | 6 - board/sbc8641d/Makefile | 10 - board/sbc8641d/README | 28 -- board/sbc8641d/ddr.c | 56 ---- board/sbc8641d/law.c | 40 --- board/sbc8641d/sbc8641d.c | 261 ----------------- configs/sbc8641d_defconfig | 4 - include/configs/sbc8641d.h | 590 --------------------------------------- 10 files changed, 1008 deletions(-) delete mode 100644 board/sbc8641d/Kconfig delete mode 100644 board/sbc8641d/MAINTAINERS delete mode 100644 board/sbc8641d/Makefile delete mode 100644 board/sbc8641d/README delete mode 100644 board/sbc8641d/ddr.c delete mode 100644 board/sbc8641d/law.c delete mode 100644 board/sbc8641d/sbc8641d.c delete mode 100644 configs/sbc8641d_defconfig delete mode 100644 include/configs/sbc8641d.h
arch/powerpc/cpu/mpc86xx/Kconfig +0 -4
@@ -8,9 +8,6 @@ choice prompt "Target select" optional -config TARGET_SBC8641D - bool "Support sbc8641d" - config TARGET_MPC8641HPCN bool "Support MPC8641HPCN"
@@ -20,7 +17,6 @@ config TARGET_XPEDITE517X endchoice source "board/freescale/mpc8641hpcn/Kconfig" -source "board/sbc8641d/Kconfig" source "board/xes/xpedite517x/Kconfig" endmenu
board/sbc8641d/Kconfig deleted +0 -9
@@ -1,9 +0,0 @@ -if TARGET_SBC8641D - -config SYS_BOARD - default "sbc8641d" - -config SYS_CONFIG_NAME - default "sbc8641d" - -endif
board/sbc8641d/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -SBC8641D BOARD -M: Paul Gortmaker <[email protected]> -S: Maintained -F: board/sbc8641d/ -F: include/configs/sbc8641d.h -F: configs/sbc8641d_defconfig
board/sbc8641d/Makefile deleted +0 -10
@@ -1,10 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += sbc8641d.o -obj-y += law.o -obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
board/sbc8641d/README deleted +0 -28
@@ -1,28 +0,0 @@ -Wind River SBC8641D reference board -=========================== - -Created 06/14/2007 Joe Hamman -Copyright 2007, Embedded Specialties, Inc. -Copyright 2007 Wind River Systemes, Inc. ------------------------------ - -1. Building U-Boot ------------------- -The SBC8641D code is known to build using ELDK 4.1. - - $ make sbc8641d_config - Configuring for sbc8641d board... - - $ make - - -2. Switch and Jumper Settings ------------------------------ -All Jumpers & Switches are in their default positions. Please refer to -the board documentation for details. Some settings control CPU voltages -and settings may change with board revisions. - -3. Known limitations --------------------- -PCI: - The PCI command may hang if no boards are present in either slot.
board/sbc8641d/ddr.c deleted +0 -56
56 lines not on this page · raw message
board/sbc8641d/law.c deleted +0 -40
@@ -1,40 +0,0 @@ -/* -* Copyright 2008 Freescale Semiconductor, Inc. -* -* (C) Copyright 2000 -* Wolfgang Denk, DENX Software Engineering, wd at denx.de. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* -* LAW (Local Access Window) configuration: -* -* 0x0000_0000 DDR 256M -* 0x1000_0000 DDR2 256M -* 0x8000_0000 PCIE1 MEM 512M -* 0xa000_0000 PCIE2 MEM 512M -* 0xc000_0000 RapidIO 512M -* 0xe200_0000 PCIE1 IO 16M -* 0xe300_0000 PCIE2 IO 16M -* 0xf800_0000 CCSRBAR 2M -* 0xfe00_0000 FLASH (boot bank) 32M -* -*/ - - -struct law_entry law_table[] = { -#if !defined(CONFIG_SPD_EEPROM) -SET_LAW (CONFIG_SYS_DDR_SDRAM_BASE ,LAW_SIZE_256M ,LAW_TRGT_IF_DDR_1 ), -SET_LAW (CONFIG_SYS_DDR_SDRAM_BASE +0x10000000 , -LAW_SIZE_256M ,LAW_TRGT_IF_DDR_2 ), -#endif -SET_LAW (0xf8000000 ,LAW_SIZE_2M ,LAW_TRGT_IF_LBC ), -SET_LAW (0xfe000000 ,LAW_SIZE_32M ,LAW_TRGT_IF_LBC ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);
board/sbc8641d/sbc8641d.c deleted +0 -261
261 lines not on this page · raw message
configs/sbc8641d_defconfig deleted +0 -4
@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC86xx=y -CONFIG_TARGET_SBC8641D=y -# CONFIG_CMD_SETEXPR is not set
include/configs/sbc8641d.h deleted +0 -590
590 lines not on this page · raw message
Signature · 1 line
1.9.1
RFC PATCH 28/28 powerpc: remove sbc8641d support
CCing Paul.
Quoted 1,107 lines · On Thu, 13 Aug 2015 19:15:46 +0900 Masahiro Yamada…
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
Signed-off-by Masahiro Yamada <[email protected]>---
arch/powerpc/cpu/mpc86xx/Kconfig | 4 - board/sbc8641d/Kconfig | 9 - board/sbc8641d/MAINTAINERS | 6 - board/sbc8641d/Makefile | 10 - board/sbc8641d/README | 28 -- board/sbc8641d/ddr.c | 56 ---- board/sbc8641d/law.c | 40 --- board/sbc8641d/sbc8641d.c | 261 ----------------- configs/sbc8641d_defconfig | 4 - include/configs/sbc8641d.h | 590 --------------------------------------- 10 files changed, 1008 deletions(-) delete mode 100644 board/sbc8641d/Kconfig delete mode 100644 board/sbc8641d/MAINTAINERS delete mode 100644 board/sbc8641d/Makefile delete mode 100644 board/sbc8641d/README delete mode 100644 board/sbc8641d/ddr.c delete mode 100644 board/sbc8641d/law.c delete mode 100644 board/sbc8641d/sbc8641d.c delete mode 100644 configs/sbc8641d_defconfig delete mode 100644 include/configs/sbc8641d.harch/powerpc/cpu/mpc86xx/Kconfig +0
-4@@ -8,9 +8,6 @@ choice prompt "Target select" optional -config TARGET_SBC8641D - bool "Support sbc8641d" - config TARGET_MPC8641HPCN bool "Support MPC8641HPCN"@@ -20,7 +17,6 @@ config TARGET_XPEDITE517X endchoice source "board/freescale/mpc8641hpcn/Kconfig" -source "board/sbc8641d/Kconfig" source "board/xes/xpedite517x/Kconfig" endmenuboard/sbc8641d/Kconfig deleted +0
-9@@ -1,9 +0,0 @@ -if TARGET_SBC8641D - -config SYS_BOARD - default "sbc8641d" - -config SYS_CONFIG_NAME - default "sbc8641d" - -endifboard/sbc8641d/MAINTAINERS deleted +0
-6@@ -1,6 +0,0 @@ -SBC8641D BOARD -M: Paul Gortmaker <[email protected]> -S: Maintained -F: board/sbc8641d/ -F: include/configs/sbc8641d.h -F: configs/sbc8641d_defconfigboard/sbc8641d/Makefile deleted +0
-10@@ -1,10 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += sbc8641d.o -obj-y += law.o -obj-$(CONFIG_SYS_FSL_DDR2) += ddr.oboard/sbc8641d/README deleted +0
-28@@ -1,28 +0,0 @@ -Wind River SBC8641D reference board -=========================== - -Created 06/14/2007 Joe Hamman -Copyright 2007, Embedded Specialties, Inc. -Copyright 2007 Wind River Systemes, Inc. ------------------------------ - -1. Building U-Boot ------------------- -The SBC8641D code is known to build using ELDK 4.1. - - $ make sbc8641d_config - Configuring for sbc8641d board... - - $ make - - -2. Switch and Jumper Settings ------------------------------ -All Jumpers & Switches are in their default positions. Please refer to -the board documentation for details. Some settings control CPU voltages -and settings may change with board revisions. - -3. Known limitations --------------------- -PCI: - The PCI command may hang if no boards are present in either slot.board/sbc8641d/ddr.c deleted +0
-56@@ -1,56 +0,0 @@ -/* -* Copyright 2008 Freescale Semiconductor, Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* Version 2 as published by the Free Software Foundation. -*/ - -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void fsl_ddr_board_options (memctl_options_t *popts, -dimm_params_t *pdimm, -unsigned int ctrl_num) -{ -/* -* Factors to consider for clock adjust: -* - number of chips on bus -* - position of slot -* - DDR1 vs. DDR2? -* - ??? -* -* This needs to be determined on a board-by-board basis. -* 0110 3/4 cycle late -* 0111 7/8 cycle late -*/ - popts->clk_adjust =7 ; - -/* -* Factors to consider for CPO: -* - frequency -* - ddr1 vs. ddr2 -*/ - popts->cpo_override =10 ; - -/* -* Factors to consider for write data delay: -* - number of DIMMs -* -* 1 = 1/4 clock delay -* 2 = 1/2 clock delay -* 3 = 3/4 clock delay -* 4 = 1 clock delay -* 5 = 5/4 clock delay -* 6 = 3/2 clock delay -*/ - popts->write_data_delay =3 ; - -/* -* Factors to consider for half-strength driver enable: -* - number of DIMMs installed -*/ - popts->half_strength_driver_enable =0 ; -}board/sbc8641d/law.c deleted +0
-40@@ -1,40 +0,0 @@ -/* -* Copyright 2008 Freescale Semiconductor, Inc. -* -* (C) Copyright 2000 -* Wolfgang Denk, DENX Software Engineering, wd at denx.de. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* -* LAW (Local Access Window) configuration: -* -* 0x0000_0000 DDR 256M -* 0x1000_0000 DDR2 256M -* 0x8000_0000 PCIE1 MEM 512M -* 0xa000_0000 PCIE2 MEM 512M -* 0xc000_0000 RapidIO 512M -* 0xe200_0000 PCIE1 IO 16M -* 0xe300_0000 PCIE2 IO 16M -* 0xf800_0000 CCSRBAR 2M -* 0xfe00_0000 FLASH (boot bank) 32M -* -*/ - - -struct law_entry law_table[] = { -#if !defined(CONFIG_SPD_EEPROM) -SET_LAW (CONFIG_SYS_DDR_SDRAM_BASE ,LAW_SIZE_256M ,LAW_TRGT_IF_DDR_1 ), -SET_LAW (CONFIG_SYS_DDR_SDRAM_BASE +0x10000000 , -LAW_SIZE_256M ,LAW_TRGT_IF_DDR_2 ), -#endif -SET_LAW (0xf8000000 ,LAW_SIZE_2M ,LAW_TRGT_IF_LBC ), -SET_LAW (0xfe000000 ,LAW_SIZE_32M ,LAW_TRGT_IF_LBC ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);board/sbc8641d/sbc8641d.c deleted +0
-261@@ -1,261 +0,0 @@ -/* -* Copyright 2007 Wind River Systemes, Inc. <www.windriver.com> -* Copyright 2007 Embedded Specialties, Inc. -* Joe Hamman joe.hamman at embeddedspecialties.com -* -* Copyright 2004 Freescale Semiconductor. -* Jeff Brown -* Srikanth Srinivasan (srikanth.srinivasan at freescale.com) -* -* (C) Copyright 2002 Scott McNutt <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/immap_86xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/fsl_serdes.h> -#include <libfdt.h> -#include <fdt_support.h> - -long int fixed_sdram (void ); - -int board_early_init_f (void ) -{ -return 0 ; -} - -int checkboard (void ) -{ -puts ("Board: Wind River SBC8641D\n" ); - -return 0 ; -} - -phys_size_t initdram (int board_type) -{ -long dram_size =0 ; - -#if defined(CONFIG_SPD_EEPROM ) - dram_size =fsl_ddr_sdram (); -#else - dram_size =fixed_sdram (); -#endif - -debug (" DDR: " ); -return dram_size; -} - -#if defined(CONFIG_SYS_DRAM_TEST ) -int testdram (void ) -{ -uint *pstart = (uint *)CONFIG_SYS_MEMTEST_START ; -uint *pend = (uint *)CONFIG_SYS_MEMTEST_END ; -uint *p; - -puts ("SDRAM test phase 1:\n" ); -for (p = pstart; p < pend; p++) - *p =0xaaaaaaaa ; - -for (p = pstart; p < pend; p++) { -if (*p !=0xaaaaaaaa ) { -printf ("SDRAM test fails at: %08x\n" , (uint ) p); -return 1 ; - } - } - -puts ("SDRAM test phase 2:\n" ); -for (p = pstart; p < pend; p++) - *p =0x55555555 ; - -for (p = pstart; p < pend; p++) { -if (*p !=0x55555555 ) { -printf ("SDRAM test fails at: %08x\n" , (uint ) p); -return 1 ; - } - } - -puts ("SDRAM test passed.\n" ); -return 0 ; -} -#endif - -#if !defined(CONFIG_SPD_EEPROM ) -/* -* Fixed sdram init -- doesn't use serial presence detect. -*/ -long int fixed_sdram (void ) -{ -#if !defined(CONFIG_SYS_RAMBOOT ) -volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; -volatile struct ccsr_ddr *ddr = &immap->im_ddr1; - - ddr->cs0_bnds =CONFIG_SYS_DDR_CS0_BNDS ; - ddr->cs1_bnds =CONFIG_SYS_DDR_CS1_BNDS ; - ddr->cs2_bnds =CONFIG_SYS_DDR_CS2_BNDS ; - ddr->cs3_bnds =CONFIG_SYS_DDR_CS3_BNDS ; - ddr->cs0_config =CONFIG_SYS_DDR_CS0_CONFIG ; - ddr->cs1_config =CONFIG_SYS_DDR_CS1_CONFIG ; - ddr->cs2_config =CONFIG_SYS_DDR_CS2_CONFIG ; - ddr->cs3_config =CONFIG_SYS_DDR_CS3_CONFIG ; - ddr->timing_cfg_3 =CONFIG_SYS_DDR_TIMING_3 ; - ddr->timing_cfg_0 =CONFIG_SYS_DDR_TIMING_0 ; - ddr->timing_cfg_1 =CONFIG_SYS_DDR_TIMING_1 ; - ddr->timing_cfg_2 =CONFIG_SYS_DDR_TIMING_2 ; - ddr->sdram_cfg =CONFIG_SYS_DDR_CFG_1A ; - ddr->sdram_cfg_2 =CONFIG_SYS_DDR_CFG_2 ; - ddr->sdram_mode =CONFIG_SYS_DDR_MODE_1 ; - ddr->sdram_mode_2 =CONFIG_SYS_DDR_MODE_2 ; - ddr->sdram_md_cntl =CONFIG_SYS_DDR_MODE_CTL ; - ddr->sdram_interval =CONFIG_SYS_DDR_INTERVAL ; - ddr->sdram_data_init =CONFIG_SYS_DDR_DATA_INIT ; - ddr->sdram_clk_cntl =CONFIG_SYS_DDR_CLK_CTRL ; - - asm ("sync;isync" ); - -udelay (500 ); - - ddr->sdram_cfg =CONFIG_SYS_DDR_CFG_1B ; - asm ("sync; isync" ); - -udelay (500 ); - ddr = &immap->im_ddr2; - - ddr->cs0_bnds =CONFIG_SYS_DDR2_CS0_BNDS ; - ddr->cs1_bnds =CONFIG_SYS_DDR2_CS1_BNDS ; - ddr->cs2_bnds =CONFIG_SYS_DDR2_CS2_BNDS ; - ddr->cs3_bnds =CONFIG_SYS_DDR2_CS3_BNDS ; - ddr->cs0_config =CONFIG_SYS_DDR2_CS0_CONFIG ; - ddr->cs1_config =CONFIG_SYS_DDR2_CS1_CONFIG ; - ddr->cs2_config =CONFIG_SYS_DDR2_CS2_CONFIG ; - ddr->cs3_config =CONFIG_SYS_DDR2_CS3_CONFIG ; - ddr->timing_cfg_3 =CONFIG_SYS_DDR2_EXT_REFRESH ; - ddr->timing_cfg_0 =CONFIG_SYS_DDR2_TIMING_0 ; - ddr->timing_cfg_1 =CONFIG_SYS_DDR2_TIMING_1 ; - ddr->timing_cfg_2 =CONFIG_SYS_DDR2_TIMING_2 ; - ddr->sdram_cfg =CONFIG_SYS_DDR2_CFG_1A ; - ddr->sdram_cfg_2 =CONFIG_SYS_DDR2_CFG_2 ; - ddr->sdram_mode =CONFIG_SYS_DDR2_MODE_1 ; - ddr->sdram_mode_2 =CONFIG_SYS_DDR2_MODE_2 ; - ddr->sdram_md_cntl =CONFIG_SYS_DDR2_MODE_CTL ; - ddr->sdram_interval =CONFIG_SYS_DDR2_INTERVAL ; - ddr->sdram_data_init =CONFIG_SYS_DDR2_DATA_INIT ; - ddr->sdram_clk_cntl =CONFIG_SYS_DDR2_CLK_CTRL ; - - asm ("sync;isync" ); - -udelay (500 ); - - ddr->sdram_cfg =CONFIG_SYS_DDR2_CFG_1B ; - asm ("sync; isync" ); - -udelay (500 ); -#endif -return CONFIG_SYS_SDRAM_SIZE *1024 *1024 ; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - -#if defined(CONFIG_PCI ) -/* -* Initialize PCI Devices, report devices found. -*/ - -void pci_init_board (void ) -{ -fsl_pcie_init_board (0 ); -} -#endif /* CONFIG_PCI */ - - -#if defined(CONFIG_OF_BOARD_SETUP ) -int ft_board_setup (void *blob,bd_t *bd) -{ -ft_cpu_setup (blob, bd); - -FT_FSL_PCI_SETUP ; - -return 0 ; -} -#endif - -void sbc8641d_reset_board (void ) -{ -puts ("Resetting board....\n" ); -} - -/* -* get_board_sys_clk -* Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ -*/ - -unsigned long get_board_sys_clk (ulong dummy) -{ -int i; -ulong val =0 ; - - i =5 ; - i &=0x07 ; - -switch (i) { -case 0 : - val =33000000 ; -break ; -case 1 : - val =40000000 ; -break ; -case 2 : - val =50000000 ; -break ; -case 3 : - val =66000000 ; -break ; -case 4 : - val =83000000 ; -break ; -case 5 : - val =100000000 ; -break ; -case 6 : - val =134000000 ; -break ; -case 7 : - val =166000000 ; -break ; - } - -return val; -} - -void board_reset (void ) -{ -#ifdef CONFIG_SYS_RESET_ADDRESS -ulong addr =CONFIG_SYS_RESET_ADDRESS ; - -/* flush and disable I/D cache */ - __asm__ __volatile__ ("mfspr 3, 1008" :::"r3" ); - __asm__ __volatile__ ("ori 5, 5, 0xcc00" :::"r5" ); - __asm__ __volatile__ ("ori 4, 3, 0xc00" :::"r4" ); - __asm__ __volatile__ ("andc 5, 3, 5" :::"r5" ); - __asm__ __volatile__ ("sync" ); - __asm__ __volatile__ ("mtspr 1008, 4" ); - __asm__ __volatile__ ("isync" ); - __asm__ __volatile__ ("sync" ); - __asm__ __volatile__ ("mtspr 1008, 5" ); - __asm__ __volatile__ ("isync" ); - __asm__ __volatile__ ("sync" ); - -/* -* SRR0 has system reset vector, SRR1 has default MSR value -* rfi restores MSR from SRR1 and sets the PC to the SRR0 value -*/ - __asm__ __volatile__ ("mtspr 26, %0" ::"r" (addr)); - __asm__ __volatile__ ("li 4, (1 << 6)" :::"r4" ); - __asm__ __volatile__ ("mtspr 27, 4" ); - __asm__ __volatile__ ("rfi" ); -#endif -}configs/sbc8641d_defconfig deleted +0
-4@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC86xx=y -CONFIG_TARGET_SBC8641D=y -# CONFIG_CMD_SETEXPR is not setinclude/configs/sbc8641d.h deleted +0
-590@@ -1,590 +0,0 @@ -/* -* Copyright 2007 Wind River Systems <www.windriver.com> -* Copyright 2007 Embedded Specialties, Inc. -* Joe Hamman <[email protected]> -* -* Copyright 2006 Freescale Semiconductor. -* -* Srikanth Srinivasan (srikanth.srinivasan at freescale.com) -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -/* -* SBC8641D board configuration file -* -* Make sure you change the MAC address and other network params first, -* search for CONFIG_SERVERIP, etc in this file. -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_MPC8641 1/* MPC8641 specific */ -#define CONFIG_SBC8641D 1/* SBC8641D board specific */ -#define CONFIG_MP 1/* support multiple processors */ -#define CONFIG_LINUX_RESET_VEC 0x100/* Reset vector used by Linux */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#ifdef RUN_DIAG -#define CONFIG_SYS_DIAG_ADDR 0xff800000 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 - -/* -* virtual address to be used for temporary mappings. There -* should be 128k free at this VA. -*/ -#define CONFIG_SYS_SCRATCH_VA 0xe8000000 - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ - -#define CONFIG_PCI 1/* Enable PCIE */ -#define CONFIG_PCIE1 1/* PCIE controler 1 (slot 1) */ -#define CONFIG_PCIE2 1/* PCIE controler 2 (slot 2) */ -#define CONFIG_FSL_PCI_INIT 1/* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1/* indirect PCI bridge support */ -#define CONFIG_FSL_LAW 1/* Use common FSL init code */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAT_RW 1/* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1/* High BATs supported and enabled */ - -#undef CONFIG_SPD_EEPROM/* Do not use SPD EEPROM for DDR setup*/ -#undef CONFIG_DDR_ECC/* only for ECC DDR module */ -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_NUM_DDR_CONTROLLERS 2 -#define CACHE_LINE_INTERLEAVING 0x20000000 -#define PAGE_INTERLEAVING 0x21000000 -#define BANK_INTERLEAVING 0x22000000 -#define SUPER_BANK_INTERLEAVING 0x23000000 - - -#define CONFIG_ALTIVEC 1 - -/* -* L2CR setup -- make sure this is right for your board! -*/ -#define CONFIG_SYS_L2 -#define L2_INIT 0 -#define L2_ENABLE (L2CR_L2E) - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) -#endif - -#define CONFIG_BOARD_EARLY_INIT_F 1/* Call board_pre_init */ - -#undef CONFIG_SYS_DRAM_TEST/* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* -* Base addresses -- Note these are effective addresses where the -* actual resources get mapped (not physical addresses) -*/ -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000/* CCSRBAR Default */ -#define CONFIG_SYS_CCSRBAR 0xf8000000/* relocated CCSRBAR */ -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR/* PQII uses CONFIG_SYS_IMMR */ - -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW - -/* -* DDR Setup -*/ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000/* DDR is system memory */ -#define CONFIG_SYS_DDR_SDRAM_BASE2 0x10000000/* DDR bank 2 */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_SDRAM_BASE2 CONFIG_SYS_DDR_SDRAM_BASE2 -#define CONFIG_SYS_MAX_DDR_BAT_SIZE 0x80000000/* BAT mapping size */ -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 2 -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -#if defined(CONFIG_SPD_EEPROM ) -/* -* Determine DDR configuration from I2C interface. -*/ -#define SPD_EEPROM_ADDRESS1 0x51/* DDR DIMM */ -#define SPD_EEPROM_ADDRESS2 0x52/* DDR DIMM */ -#define SPD_EEPROM_ADDRESS3 0x53/* DDR DIMM */ -#define SPD_EEPROM_ADDRESS4 0x54/* DDR DIMM */ - -#else -/* -* Manually set up DDR1 & DDR2 parameters -*/ - -#define CONFIG_SYS_SDRAM_SIZE 512/* DDR is 512MB */ - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS2_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS3_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 0x00220802 -#define CONFIG_SYS_DDR_TIMING_1 0x38377322 -#define CONFIG_SYS_DDR_TIMING_2 0x002040c7 -#define CONFIG_SYS_DDR_CFG_1A 0x43008008 -#define CONFIG_SYS_DDR_CFG_2 0x24401000 -#define CONFIG_SYS_DDR_MODE_1 0x23c00542 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_MODE_CTL 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x05080100 -#define CONFIG_SYS_DDR_DATA_INIT 0x00000000 -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_CFG_1B 0xC3008008 - -#define CONFIG_SYS_DDR2_CS0_BNDS 0x0010001F -#define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR2_CS2_BNDS 0x00000000 -#define CONFIG_SYS_DDR2_CS3_BNDS 0x00000000 -#define CONFIG_SYS_DDR2_CS0_CONFIG 0x80010102 -#define CONFIG_SYS_DDR2_CS1_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_EXT_REFRESH 0x00000000 -#define CONFIG_SYS_DDR2_TIMING_0 0x00220802 -#define CONFIG_SYS_DDR2_TIMING_1 0x38377322 -#define CONFIG_SYS_DDR2_TIMING_2 0x002040c7 -#define CONFIG_SYS_DDR2_CFG_1A 0x43008008 -#define CONFIG_SYS_DDR2_CFG_2 0x24401000 -#define CONFIG_SYS_DDR2_MODE_1 0x23c00542 -#define CONFIG_SYS_DDR2_MODE_2 0x00000000 -#define CONFIG_SYS_DDR2_MODE_CTL 0x00000000 -#define CONFIG_SYS_DDR2_INTERVAL 0x05080100 -#define CONFIG_SYS_DDR2_DATA_INIT 0x00000000 -#define CONFIG_SYS_DDR2_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR2_CFG_1B 0xC3008008 - - -#endif - -/* #define CONFIG_ID_EEPROM 1 -#define ID_EEPROM_ADDR 0x57 */ - -/* -* The SBC8641D contains 16MB flash space at ff000000. -*/ -#define CONFIG_SYS_FLASH_BASE 0xff000000/* start of FLASH 16M */ - -/* Flash */ -#define CONFIG_SYS_BR0_PRELIM 0xff001001/* port size 16bit */ -#define CONFIG_SYS_OR0_PRELIM 0xff006e65/* 16MB Boot Flash area */ - -/* 64KB EEPROM */ -#define CONFIG_SYS_BR1_PRELIM 0xf0000801/* port size 16bit */ -#define CONFIG_SYS_OR1_PRELIM 0xffff6e65/* 64K EEPROM area */ - -/* EPLD - User switches, board id, LEDs */ -#define CONFIG_SYS_BR2_PRELIM 0xf1000801/* port size 16bit */ -#define CONFIG_SYS_OR2_PRELIM 0xfff06e65/* EPLD (switches, board ID, LEDs) area */ - -/* Local bus SDRAM 128MB */ -#define CONFIG_SYS_BR3_PRELIM 0xe0001861/* port size ?bit */ -#define CONFIG_SYS_OR3_PRELIM 0xfc006cc0/* 128MB local bus SDRAM area (1st half) */ -#define CONFIG_SYS_BR4_PRELIM 0xe4001861/* port size ?bit */ -#define CONFIG_SYS_OR4_PRELIM 0xfc006cc0/* 128MB local bus SDRAM area (2nd half) */ - -/* Disk on Chip (DOC) 128MB */ -#define CONFIG_SYS_BR5_PRELIM 0xe8001001/* port size ?bit */ -#define CONFIG_SYS_OR5_PRELIM 0xf8006e65/* 128MB local bus SDRAM area (2nd half) */ - -/* LCD */ -#define CONFIG_SYS_BR6_PRELIM 0xf4000801/* port size ?bit */ -#define CONFIG_SYS_OR6_PRELIM 0xfff06e65/* 128MB local bus SDRAM area (2nd half) */ - -/* Control logic & misc peripherals */ -#define CONFIG_SYS_BR7_PRELIM 0xf2000801/* port size ?bit */ -#define CONFIG_SYS_OR7_PRELIM 0xfff06e65/* 128MB local bus SDRAM area (2nd half) */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1/* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 131/* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000/* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500/* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE/* start of monitor */ -#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000/* early monitor loc */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_WRITE_SWAPPED_DATA -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_PROTECTION - -#undef CONFIG_CLOCKS_IN_MHZ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#ifndef CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000/* Initial RAM address */ -#else -#define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000/* Initial RAM address */ -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000/* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024)/* Reserved for malloc */ - -/* Serial Port */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - -/* -* Pass open firmware flat tree to kernel -*/ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* -* I2C -*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* -* RapidIO MMU -*/ -#define CONFIG_SYS_SRIO1_MEM_BASE 0xc0000000/* base address */ -#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BASE -#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000/* 128M */ - -/* -* General PCI -* Addresses are mapped 1-1. -*/ -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_VIRT CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000/* 512M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0xe2000000 -#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS -#define CONFIG_SYS_PCIE1_IO_VIRT CONFIG_SYS_PCIE1_IO_BUS -#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000/* 16M */ - -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS -#define CONFIG_SYS_PCIE2_MEM_VIRT CONFIG_SYS_PCIE2_MEM_BUS -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000/* 256M */ -#define CONFIG_SYS_PCIE2_IO_BUS 0xe3000000 -#define CONFIG_SYS_PCIE2_IO_PHYS CONFIG_SYS_PCIE2_IO_BUS -#define CONFIG_SYS_PCIE2_IO_VIRT CONFIG_SYS_PCIE2_IO_BUS -#define CONFIG_SYS_PCIE2_IO_SIZE 0x1000000/* 16M */ - -#if defined(CONFIG_PCI ) - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP - -#if !defined(CONFIG_PCI_PNP ) -#define PCI_ENET0_IOADDR 0xe0000000 -#define PCI_ENET0_MEMADDR 0xe0000000 -#define PCI_IDSEL_NUMBER 0x0c/* slot0->3(IDSEL)=12->15 */ -#endif - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#define CONFIG_DOS_PARTITION -#undef CONFIG_SCSI_AHCI - -#ifdef CONFIG_SCSI_AHCI -#define CONFIG_SATA_ULI5288 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE -#endif - -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET ) - -/* #define CONFIG_MII 1 */ /* MII PHY management */ - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" -#define CONFIG_TSEC4 1 -#define CONFIG_TSEC4_NAME "eTSEC4" - -#define TSEC1_PHY_ADDR 0x1F -#define TSEC2_PHY_ADDR 0x00 -#define TSEC3_PHY_ADDR 0x01 -#define TSEC4_PHY_ADDR 0x02 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC3_FLAGS TSEC_GIGABIT -#define TSEC4_FLAGS TSEC_GIGABIT - -#define CONFIG_SYS_TBIPA_VALUE 0x1e/* Set TBI address not to conflict with TSEC1_PHY_ADDR */ - -#define CONFIG_ETHPRIME "eTSEC1" - -#endif /* CONFIG_TSEC_ENET */ - -/* -* BAT0 2G Cacheable, non-guarded -* 0x0000_0000 2G DDR -*/ -#define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) -#define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U - -/* -* BAT1 1G Cache-inhibited, guarded -* 0x8000_0000 512M PCI-Express 1 Memory -* 0xa000_0000 512M PCI-Express 2 Memory -* Changed it for operating from 0xd0000000 -*/ -#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U - -/* -* BAT2 512M Cache-inhibited, guarded -* 0xc000_0000 512M RapidIO Memory -*/ -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U - -/* -* BAT3 4M Cache-inhibited, guarded -* 0xf800_0000 4M CCSR -*/ -#define CONFIG_SYS_DBAT3L ( CONFIG_SYS_CCSRBAR | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U - -#if (CONFIG_SYS_CCSRBAR_DEFAULT !=CONFIG_SYS_CCSRBAR ) -#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATL_PP_RW | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATU_BL_1M | BATU_VS | BATU_VP) -#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU -#endif - -/* -* BAT4 32M Cache-inhibited, guarded -* 0xe200_0000 16M PCI-Express 1 I/O -* 0xe300_0000 16M PCI-Express 2 I/0 -* Note that this is at 0xe0000000 -*/ -#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U - -/* -* BAT5 128K Cacheable, non-guarded -* 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) -*/ -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L -#define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U - -/* -* BAT6 32M Cache-inhibited, guarded -* 0xfe00_0000 32M FLASH -*/ -#define CONFIG_SYS_DBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U - -/* Map the last 1M of flash where we're running from reset */ -#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY - -#define CONFIG_SYS_DBAT7L 0x00000000 -#define CONFIG_SYS_DBAT7U 0x00000000 -#define CONFIG_SYS_IBAT7L 0x00000000 -#define CONFIG_SYS_IBAT7U 0x00000000 - -/* -* Environment -*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) -#define CONFIG_ENV_SECT_SIZE 0x40000/* 256K(one sector) for env */ -#define CONFIG_ENV_SIZE 0x2000 - -#define CONFIG_LOADS_ECHO 1/* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1/* allow baudrate change */ - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI ) -#define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG/* watchdog disabled */ - -/* -* Miscellaneous configurable options -*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ - -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - -/* -* For booting Linux, the board info and command line data -* have to be in the first 8 MB of memory, since this is -* the maximum mapped by the Linux kernel during initialization. -*/ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux*/ - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CACHELINE_SHIFT 5/*log base 2 of the above value*/ -#endif - -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ -#endif - -/* -* Environment Configuration -*/ - -#define CONFIG_HAS_ETH0 1 -#define CONFIG_HAS_ETH1 1 -#define CONFIG_HAS_ETH2 1 -#define CONFIG_HAS_ETH3 1 - -#define CONFIG_IPADDR 192.168.0.50 - -#define CONFIG_HOSTNAME sbc8641d -#define CONFIG_ROOTPATH "/opt/eldk/ppc_74xx" -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_NETMASK 255.255.255.0 - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10/* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS/* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=uRamdisk\0" \ - "dtbaddr=400000\0" \ - "dtbfile=sbc8641d.dtb\0" \ - "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ - "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ - "maxcpus=1" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr $ramdiskaddr $dtbaddr" - -#define CONFIG_FLASHBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "bootm ffd00000 ffb00000 ffa00000" - -#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND - -#endif /* __CONFIG_H */
RFC PATCH 28/28 powerpc: remove sbc8641d support
Quoted 8 lines · [Re: [RFC PATCH 28/28] powerpc: remove sbc8641d support] On 13/08/2015 (Thu…
CCing Paul.
Quoted 2 lines · On Thu, 13 Aug 2015 19:15:46 +0900 Masahiro Yamada…
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)
Thanks for the CC: -- let me have a look next week as to how complex the conversion is, since it is one of the few PowerPC platforms that is actually SMP, it makes a useful test platform. When I converted the sbc8548, I recall testing the 8641d but there was breakage in the DDR init caused by other (unknown) changes that prevented me from doing the conversion then and there. Mabye I'll get lucky and that issue will be resolved now.
So please hold on this for a short while longer.
Paul.
--
Quoted 1,105 lines
Quoted 1,105 lines
Signed-off-by Masahiro Yamada <[email protected]>---
arch/powerpc/cpu/mpc86xx/Kconfig | 4 - board/sbc8641d/Kconfig | 9 - board/sbc8641d/MAINTAINERS | 6 - board/sbc8641d/Makefile | 10 - board/sbc8641d/README | 28 -- board/sbc8641d/ddr.c | 56 ---- board/sbc8641d/law.c | 40 --- board/sbc8641d/sbc8641d.c | 261 ----------------- configs/sbc8641d_defconfig | 4 - include/configs/sbc8641d.h | 590 --------------------------------------- 10 files changed, 1008 deletions(-) delete mode 100644 board/sbc8641d/Kconfig delete mode 100644 board/sbc8641d/MAINTAINERS delete mode 100644 board/sbc8641d/Makefile delete mode 100644 board/sbc8641d/README delete mode 100644 board/sbc8641d/ddr.c delete mode 100644 board/sbc8641d/law.c delete mode 100644 board/sbc8641d/sbc8641d.c delete mode 100644 configs/sbc8641d_defconfig delete mode 100644 include/configs/sbc8641d.harch/powerpc/cpu/mpc86xx/Kconfig +0
-4@@ -8,9 +8,6 @@ choice prompt "Target select" optional -config TARGET_SBC8641D - bool "Support sbc8641d" - config TARGET_MPC8641HPCN bool "Support MPC8641HPCN"@@ -20,7 +17,6 @@ config TARGET_XPEDITE517X endchoice source "board/freescale/mpc8641hpcn/Kconfig" -source "board/sbc8641d/Kconfig" source "board/xes/xpedite517x/Kconfig" endmenuboard/sbc8641d/Kconfig deleted +0
-9@@ -1,9 +0,0 @@ -if TARGET_SBC8641D - -config SYS_BOARD - default "sbc8641d" - -config SYS_CONFIG_NAME - default "sbc8641d" - -endifboard/sbc8641d/MAINTAINERS deleted +0
-6@@ -1,6 +0,0 @@ -SBC8641D BOARD -M: Paul Gortmaker <[email protected]> -S: Maintained -F: board/sbc8641d/ -F: include/configs/sbc8641d.h -F: configs/sbc8641d_defconfigboard/sbc8641d/Makefile deleted +0
-10@@ -1,10 +0,0 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += sbc8641d.o -obj-y += law.o -obj-$(CONFIG_SYS_FSL_DDR2) += ddr.oboard/sbc8641d/README deleted +0
-28@@ -1,28 +0,0 @@ -Wind River SBC8641D reference board -=========================== - -Created 06/14/2007 Joe Hamman -Copyright 2007, Embedded Specialties, Inc. -Copyright 2007 Wind River Systemes, Inc. ------------------------------ - -1. Building U-Boot ------------------- -The SBC8641D code is known to build using ELDK 4.1. - - $ make sbc8641d_config - Configuring for sbc8641d board... - - $ make - - -2. Switch and Jumper Settings ------------------------------ -All Jumpers & Switches are in their default positions. Please refer to -the board documentation for details. Some settings control CPU voltages -and settings may change with board revisions. - -3. Known limitations --------------------- -PCI: - The PCI command may hang if no boards are present in either slot.board/sbc8641d/ddr.c deleted +0
-56@@ -1,56 +0,0 @@ -/* -* Copyright 2008 Freescale Semiconductor, Inc. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License -* Version 2 as published by the Free Software Foundation. -*/ - -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -void fsl_ddr_board_options (memctl_options_t *popts, -dimm_params_t *pdimm, -unsigned int ctrl_num) -{ -/* -* Factors to consider for clock adjust: -* - number of chips on bus -* - position of slot -* - DDR1 vs. DDR2? -* - ??? -* -* This needs to be determined on a board-by-board basis. -* 0110 3/4 cycle late -* 0111 7/8 cycle late -*/ - popts->clk_adjust =7 ; - -/* -* Factors to consider for CPO: -* - frequency -* - ddr1 vs. ddr2 -*/ - popts->cpo_override =10 ; - -/* -* Factors to consider for write data delay: -* - number of DIMMs -* -* 1 = 1/4 clock delay -* 2 = 1/2 clock delay -* 3 = 3/4 clock delay -* 4 = 1 clock delay -* 5 = 5/4 clock delay -* 6 = 3/2 clock delay -*/ - popts->write_data_delay =3 ; - -/* -* Factors to consider for half-strength driver enable: -* - number of DIMMs installed -*/ - popts->half_strength_driver_enable =0 ; -}board/sbc8641d/law.c deleted +0
-40@@ -1,40 +0,0 @@ -/* -* Copyright 2008 Freescale Semiconductor, Inc. -* -* (C) Copyright 2000 -* Wolfgang Denk, DENX Software Engineering, wd at denx.de. -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* -* LAW (Local Access Window) configuration: -* -* 0x0000_0000 DDR 256M -* 0x1000_0000 DDR2 256M -* 0x8000_0000 PCIE1 MEM 512M -* 0xa000_0000 PCIE2 MEM 512M -* 0xc000_0000 RapidIO 512M -* 0xe200_0000 PCIE1 IO 16M -* 0xe300_0000 PCIE2 IO 16M -* 0xf800_0000 CCSRBAR 2M -* 0xfe00_0000 FLASH (boot bank) 32M -* -*/ - - -struct law_entry law_table[] = { -#if !defined(CONFIG_SPD_EEPROM) -SET_LAW (CONFIG_SYS_DDR_SDRAM_BASE ,LAW_SIZE_256M ,LAW_TRGT_IF_DDR_1 ), -SET_LAW (CONFIG_SYS_DDR_SDRAM_BASE +0x10000000 , -LAW_SIZE_256M ,LAW_TRGT_IF_DDR_2 ), -#endif -SET_LAW (0xf8000000 ,LAW_SIZE_2M ,LAW_TRGT_IF_LBC ), -SET_LAW (0xfe000000 ,LAW_SIZE_32M ,LAW_TRGT_IF_LBC ), -}; - -int num_law_entries =ARRAY_SIZE (law_table);board/sbc8641d/sbc8641d.c deleted +0
-261@@ -1,261 +0,0 @@ -/* -* Copyright 2007 Wind River Systemes, Inc. <www.windriver.com> -* Copyright 2007 Embedded Specialties, Inc. -* Joe Hamman joe.hamman at embeddedspecialties.com -* -* Copyright 2004 Freescale Semiconductor. -* Jeff Brown -* Srikanth Srinivasan (srikanth.srinivasan at freescale.com) -* -* (C) Copyright 2002 Scott McNutt <[email protected]> -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/immap_86xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/fsl_serdes.h> -#include <libfdt.h> -#include <fdt_support.h> - -long int fixed_sdram (void ); - -int board_early_init_f (void ) -{ -return 0 ; -} - -int checkboard (void ) -{ -puts ("Board: Wind River SBC8641D\n" ); - -return 0 ; -} - -phys_size_t initdram (int board_type) -{ -long dram_size =0 ; - -#if defined(CONFIG_SPD_EEPROM ) - dram_size =fsl_ddr_sdram (); -#else - dram_size =fixed_sdram (); -#endif - -debug (" DDR: " ); -return dram_size; -} - -#if defined(CONFIG_SYS_DRAM_TEST ) -int testdram (void ) -{ -uint *pstart = (uint *)CONFIG_SYS_MEMTEST_START ; -uint *pend = (uint *)CONFIG_SYS_MEMTEST_END ; -uint *p; - -puts ("SDRAM test phase 1:\n" ); -for (p = pstart; p < pend; p++) - *p =0xaaaaaaaa ; - -for (p = pstart; p < pend; p++) { -if (*p !=0xaaaaaaaa ) { -printf ("SDRAM test fails at: %08x\n" , (uint ) p); -return 1 ; - } - } - -puts ("SDRAM test phase 2:\n" ); -for (p = pstart; p < pend; p++) - *p =0x55555555 ; - -for (p = pstart; p < pend; p++) { -if (*p !=0x55555555 ) { -printf ("SDRAM test fails at: %08x\n" , (uint ) p); -return 1 ; - } - } - -puts ("SDRAM test passed.\n" ); -return 0 ; -} -#endif - -#if !defined(CONFIG_SPD_EEPROM ) -/* -* Fixed sdram init -- doesn't use serial presence detect. -*/ -long int fixed_sdram (void ) -{ -#if !defined(CONFIG_SYS_RAMBOOT ) -volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; -volatile struct ccsr_ddr *ddr = &immap->im_ddr1; - - ddr->cs0_bnds =CONFIG_SYS_DDR_CS0_BNDS ; - ddr->cs1_bnds =CONFIG_SYS_DDR_CS1_BNDS ; - ddr->cs2_bnds =CONFIG_SYS_DDR_CS2_BNDS ; - ddr->cs3_bnds =CONFIG_SYS_DDR_CS3_BNDS ; - ddr->cs0_config =CONFIG_SYS_DDR_CS0_CONFIG ; - ddr->cs1_config =CONFIG_SYS_DDR_CS1_CONFIG ; - ddr->cs2_config =CONFIG_SYS_DDR_CS2_CONFIG ; - ddr->cs3_config =CONFIG_SYS_DDR_CS3_CONFIG ; - ddr->timing_cfg_3 =CONFIG_SYS_DDR_TIMING_3 ; - ddr->timing_cfg_0 =CONFIG_SYS_DDR_TIMING_0 ; - ddr->timing_cfg_1 =CONFIG_SYS_DDR_TIMING_1 ; - ddr->timing_cfg_2 =CONFIG_SYS_DDR_TIMING_2 ; - ddr->sdram_cfg =CONFIG_SYS_DDR_CFG_1A ; - ddr->sdram_cfg_2 =CONFIG_SYS_DDR_CFG_2 ; - ddr->sdram_mode =CONFIG_SYS_DDR_MODE_1 ; - ddr->sdram_mode_2 =CONFIG_SYS_DDR_MODE_2 ; - ddr->sdram_md_cntl =CONFIG_SYS_DDR_MODE_CTL ; - ddr->sdram_interval =CONFIG_SYS_DDR_INTERVAL ; - ddr->sdram_data_init =CONFIG_SYS_DDR_DATA_INIT ; - ddr->sdram_clk_cntl =CONFIG_SYS_DDR_CLK_CTRL ; - - asm ("sync;isync" ); - -udelay (500 ); - - ddr->sdram_cfg =CONFIG_SYS_DDR_CFG_1B ; - asm ("sync; isync" ); - -udelay (500 ); - ddr = &immap->im_ddr2; - - ddr->cs0_bnds =CONFIG_SYS_DDR2_CS0_BNDS ; - ddr->cs1_bnds =CONFIG_SYS_DDR2_CS1_BNDS ; - ddr->cs2_bnds =CONFIG_SYS_DDR2_CS2_BNDS ; - ddr->cs3_bnds =CONFIG_SYS_DDR2_CS3_BNDS ; - ddr->cs0_config =CONFIG_SYS_DDR2_CS0_CONFIG ; - ddr->cs1_config =CONFIG_SYS_DDR2_CS1_CONFIG ; - ddr->cs2_config =CONFIG_SYS_DDR2_CS2_CONFIG ; - ddr->cs3_config =CONFIG_SYS_DDR2_CS3_CONFIG ; - ddr->timing_cfg_3 =CONFIG_SYS_DDR2_EXT_REFRESH ; - ddr->timing_cfg_0 =CONFIG_SYS_DDR2_TIMING_0 ; - ddr->timing_cfg_1 =CONFIG_SYS_DDR2_TIMING_1 ; - ddr->timing_cfg_2 =CONFIG_SYS_DDR2_TIMING_2 ; - ddr->sdram_cfg =CONFIG_SYS_DDR2_CFG_1A ; - ddr->sdram_cfg_2 =CONFIG_SYS_DDR2_CFG_2 ; - ddr->sdram_mode =CONFIG_SYS_DDR2_MODE_1 ; - ddr->sdram_mode_2 =CONFIG_SYS_DDR2_MODE_2 ; - ddr->sdram_md_cntl =CONFIG_SYS_DDR2_MODE_CTL ; - ddr->sdram_interval =CONFIG_SYS_DDR2_INTERVAL ; - ddr->sdram_data_init =CONFIG_SYS_DDR2_DATA_INIT ; - ddr->sdram_clk_cntl =CONFIG_SYS_DDR2_CLK_CTRL ; - - asm ("sync;isync" ); - -udelay (500 ); - - ddr->sdram_cfg =CONFIG_SYS_DDR2_CFG_1B ; - asm ("sync; isync" ); - -udelay (500 ); -#endif -return CONFIG_SYS_SDRAM_SIZE *1024 *1024 ; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - -#if defined(CONFIG_PCI ) -/* -* Initialize PCI Devices, report devices found. -*/ - -void pci_init_board (void ) -{ -fsl_pcie_init_board (0 ); -} -#endif /* CONFIG_PCI */ - - -#if defined(CONFIG_OF_BOARD_SETUP ) -int ft_board_setup (void *blob,bd_t *bd) -{ -ft_cpu_setup (blob, bd); - -FT_FSL_PCI_SETUP ; - -return 0 ; -} -#endif - -void sbc8641d_reset_board (void ) -{ -puts ("Resetting board....\n" ); -} - -/* -* get_board_sys_clk -* Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ -*/ - -unsigned long get_board_sys_clk (ulong dummy) -{ -int i; -ulong val =0 ; - - i =5 ; - i &=0x07 ; - -switch (i) { -case 0 : - val =33000000 ; -break ; -case 1 : - val =40000000 ; -break ; -case 2 : - val =50000000 ; -break ; -case 3 : - val =66000000 ; -break ; -case 4 : - val =83000000 ; -break ; -case 5 : - val =100000000 ; -break ; -case 6 : - val =134000000 ; -break ; -case 7 : - val =166000000 ; -break ; - } - -return val; -} - -void board_reset (void ) -{ -#ifdef CONFIG_SYS_RESET_ADDRESS -ulong addr =CONFIG_SYS_RESET_ADDRESS ; - -/* flush and disable I/D cache */ - __asm__ __volatile__ ("mfspr 3, 1008" :::"r3" ); - __asm__ __volatile__ ("ori 5, 5, 0xcc00" :::"r5" ); - __asm__ __volatile__ ("ori 4, 3, 0xc00" :::"r4" ); - __asm__ __volatile__ ("andc 5, 3, 5" :::"r5" ); - __asm__ __volatile__ ("sync" ); - __asm__ __volatile__ ("mtspr 1008, 4" ); - __asm__ __volatile__ ("isync" ); - __asm__ __volatile__ ("sync" ); - __asm__ __volatile__ ("mtspr 1008, 5" ); - __asm__ __volatile__ ("isync" ); - __asm__ __volatile__ ("sync" ); - -/* -* SRR0 has system reset vector, SRR1 has default MSR value -* rfi restores MSR from SRR1 and sets the PC to the SRR0 value -*/ - __asm__ __volatile__ ("mtspr 26, %0" ::"r" (addr)); - __asm__ __volatile__ ("li 4, (1 << 6)" :::"r4" ); - __asm__ __volatile__ ("mtspr 27, 4" ); - __asm__ __volatile__ ("rfi" ); -#endif -}configs/sbc8641d_defconfig deleted +0
-4@@ -1,4 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC86xx=y -CONFIG_TARGET_SBC8641D=y -# CONFIG_CMD_SETEXPR is not setinclude/configs/sbc8641d.h deleted +0
-590@@ -1,590 +0,0 @@ -/* -* Copyright 2007 Wind River Systems <www.windriver.com> -* Copyright 2007 Embedded Specialties, Inc. -* Joe Hamman <[email protected]> -* -* Copyright 2006 Freescale Semiconductor. -* -* Srikanth Srinivasan (srikanth.srinivasan at freescale.com) -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -/* -* SBC8641D board configuration file -* -* Make sure you change the MAC address and other network params first, -* search for CONFIG_SERVERIP, etc in this file. -*/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_MPC8641 1/* MPC8641 specific */ -#define CONFIG_SBC8641D 1/* SBC8641D board specific */ -#define CONFIG_MP 1/* support multiple processors */ -#define CONFIG_LINUX_RESET_VEC 0x100/* Reset vector used by Linux */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#ifdef RUN_DIAG -#define CONFIG_SYS_DIAG_ADDR 0xff800000 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 - -/* -* virtual address to be used for temporary mappings. There -* should be 128k free at this VA. -*/ -#define CONFIG_SYS_SCRATCH_VA 0xe8000000 - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ - -#define CONFIG_PCI 1/* Enable PCIE */ -#define CONFIG_PCIE1 1/* PCIE controler 1 (slot 1) */ -#define CONFIG_PCIE2 1/* PCIE controler 2 (slot 2) */ -#define CONFIG_FSL_PCI_INIT 1/* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE 1/* indirect PCI bridge support */ -#define CONFIG_FSL_LAW 1/* Use common FSL init code */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAT_RW 1/* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1/* High BATs supported and enabled */ - -#undef CONFIG_SPD_EEPROM/* Do not use SPD EEPROM for DDR setup*/ -#undef CONFIG_DDR_ECC/* only for ECC DDR module */ -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_NUM_DDR_CONTROLLERS 2 -#define CACHE_LINE_INTERLEAVING 0x20000000 -#define PAGE_INTERLEAVING 0x21000000 -#define BANK_INTERLEAVING 0x22000000 -#define SUPER_BANK_INTERLEAVING 0x23000000 - - -#define CONFIG_ALTIVEC 1 - -/* -* L2CR setup -- make sure this is right for your board! -*/ -#define CONFIG_SYS_L2 -#define L2_INIT 0 -#define L2_ENABLE (L2CR_L2E) - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) -#endif - -#define CONFIG_BOARD_EARLY_INIT_F 1/* Call board_pre_init */ - -#undef CONFIG_SYS_DRAM_TEST/* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000/* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* -* Base addresses -- Note these are effective addresses where the -* actual resources get mapped (not physical addresses) -*/ -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000/* CCSRBAR Default */ -#define CONFIG_SYS_CCSRBAR 0xf8000000/* relocated CCSRBAR */ -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR/* PQII uses CONFIG_SYS_IMMR */ - -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW - -/* -* DDR Setup -*/ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000/* DDR is system memory */ -#define CONFIG_SYS_DDR_SDRAM_BASE2 0x10000000/* DDR bank 2 */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_SDRAM_BASE2 CONFIG_SYS_DDR_SDRAM_BASE2 -#define CONFIG_SYS_MAX_DDR_BAT_SIZE 0x80000000/* BAT mapping size */ -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 2 -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 -#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) - -#if defined(CONFIG_SPD_EEPROM ) -/* -* Determine DDR configuration from I2C interface. -*/ -#define SPD_EEPROM_ADDRESS1 0x51/* DDR DIMM */ -#define SPD_EEPROM_ADDRESS2 0x52/* DDR DIMM */ -#define SPD_EEPROM_ADDRESS3 0x53/* DDR DIMM */ -#define SPD_EEPROM_ADDRESS4 0x54/* DDR DIMM */ - -#else -/* -* Manually set up DDR1 & DDR2 parameters -*/ - -#define CONFIG_SYS_SDRAM_SIZE 512/* DDR is 512MB */ - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS2_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS3_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 0x00220802 -#define CONFIG_SYS_DDR_TIMING_1 0x38377322 -#define CONFIG_SYS_DDR_TIMING_2 0x002040c7 -#define CONFIG_SYS_DDR_CFG_1A 0x43008008 -#define CONFIG_SYS_DDR_CFG_2 0x24401000 -#define CONFIG_SYS_DDR_MODE_1 0x23c00542 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_MODE_CTL 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x05080100 -#define CONFIG_SYS_DDR_DATA_INIT 0x00000000 -#define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR_CFG_1B 0xC3008008 - -#define CONFIG_SYS_DDR2_CS0_BNDS 0x0010001F -#define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR2_CS2_BNDS 0x00000000 -#define CONFIG_SYS_DDR2_CS3_BNDS 0x00000000 -#define CONFIG_SYS_DDR2_CS0_CONFIG 0x80010102 -#define CONFIG_SYS_DDR2_CS1_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_EXT_REFRESH 0x00000000 -#define CONFIG_SYS_DDR2_TIMING_0 0x00220802 -#define CONFIG_SYS_DDR2_TIMING_1 0x38377322 -#define CONFIG_SYS_DDR2_TIMING_2 0x002040c7 -#define CONFIG_SYS_DDR2_CFG_1A 0x43008008 -#define CONFIG_SYS_DDR2_CFG_2 0x24401000 -#define CONFIG_SYS_DDR2_MODE_1 0x23c00542 -#define CONFIG_SYS_DDR2_MODE_2 0x00000000 -#define CONFIG_SYS_DDR2_MODE_CTL 0x00000000 -#define CONFIG_SYS_DDR2_INTERVAL 0x05080100 -#define CONFIG_SYS_DDR2_DATA_INIT 0x00000000 -#define CONFIG_SYS_DDR2_CLK_CTRL 0x03800000 -#define CONFIG_SYS_DDR2_CFG_1B 0xC3008008 - - -#endif - -/* #define CONFIG_ID_EEPROM 1 -#define ID_EEPROM_ADDR 0x57 */ - -/* -* The SBC8641D contains 16MB flash space at ff000000. -*/ -#define CONFIG_SYS_FLASH_BASE 0xff000000/* start of FLASH 16M */ - -/* Flash */ -#define CONFIG_SYS_BR0_PRELIM 0xff001001/* port size 16bit */ -#define CONFIG_SYS_OR0_PRELIM 0xff006e65/* 16MB Boot Flash area */ - -/* 64KB EEPROM */ -#define CONFIG_SYS_BR1_PRELIM 0xf0000801/* port size 16bit */ -#define CONFIG_SYS_OR1_PRELIM 0xffff6e65/* 64K EEPROM area */ - -/* EPLD - User switches, board id, LEDs */ -#define CONFIG_SYS_BR2_PRELIM 0xf1000801/* port size 16bit */ -#define CONFIG_SYS_OR2_PRELIM 0xfff06e65/* EPLD (switches, board ID, LEDs) area */ - -/* Local bus SDRAM 128MB */ -#define CONFIG_SYS_BR3_PRELIM 0xe0001861/* port size ?bit */ -#define CONFIG_SYS_OR3_PRELIM 0xfc006cc0/* 128MB local bus SDRAM area (1st half) */ -#define CONFIG_SYS_BR4_PRELIM 0xe4001861/* port size ?bit */ -#define CONFIG_SYS_OR4_PRELIM 0xfc006cc0/* 128MB local bus SDRAM area (2nd half) */ - -/* Disk on Chip (DOC) 128MB */ -#define CONFIG_SYS_BR5_PRELIM 0xe8001001/* port size ?bit */ -#define CONFIG_SYS_OR5_PRELIM 0xf8006e65/* 128MB local bus SDRAM area (2nd half) */ - -/* LCD */ -#define CONFIG_SYS_BR6_PRELIM 0xf4000801/* port size ?bit */ -#define CONFIG_SYS_OR6_PRELIM 0xfff06e65/* 128MB local bus SDRAM area (2nd half) */ - -/* Control logic & misc peripherals */ -#define CONFIG_SYS_BR7_PRELIM 0xf2000801/* port size ?bit */ -#define CONFIG_SYS_OR7_PRELIM 0xfff06e65/* 128MB local bus SDRAM area (2nd half) */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1/* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 131/* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000/* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500/* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE/* start of monitor */ -#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000/* early monitor loc */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_WRITE_SWAPPED_DATA -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_PROTECTION - -#undef CONFIG_CLOCKS_IN_MHZ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#ifndef CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000/* Initial RAM address */ -#else -#define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000/* Initial RAM address */ -#endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000/* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024)/* Reserved for malloc */ - -/* Serial Port */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - -/* -* Pass open firmware flat tree to kernel -*/ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* -* I2C -*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100 -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } - -/* -* RapidIO MMU -*/ -#define CONFIG_SYS_SRIO1_MEM_BASE 0xc0000000/* base address */ -#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BASE -#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000/* 128M */ - -/* -* General PCI -* Addresses are mapped 1-1. -*/ -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_VIRT CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000/* 512M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0xe2000000 -#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS -#define CONFIG_SYS_PCIE1_IO_VIRT CONFIG_SYS_PCIE1_IO_BUS -#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000/* 16M */ - -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS -#define CONFIG_SYS_PCIE2_MEM_VIRT CONFIG_SYS_PCIE2_MEM_BUS -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000/* 256M */ -#define CONFIG_SYS_PCIE2_IO_BUS 0xe3000000 -#define CONFIG_SYS_PCIE2_IO_PHYS CONFIG_SYS_PCIE2_IO_BUS -#define CONFIG_SYS_PCIE2_IO_VIRT CONFIG_SYS_PCIE2_IO_BUS -#define CONFIG_SYS_PCIE2_IO_SIZE 0x1000000/* 16M */ - -#if defined(CONFIG_PCI ) - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP - -#if !defined(CONFIG_PCI_PNP ) -#define PCI_ENET0_IOADDR 0xe0000000 -#define PCI_ENET0_MEMADDR 0xe0000000 -#define PCI_IDSEL_NUMBER 0x0c/* slot0->3(IDSEL)=12->15 */ -#endif - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#define CONFIG_DOS_PARTITION -#undef CONFIG_SCSI_AHCI - -#ifdef CONFIG_SCSI_AHCI -#define CONFIG_SATA_ULI5288 -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) -#define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE -#endif - -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET ) - -/* #define CONFIG_MII 1 */ /* MII PHY management */ - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" -#define CONFIG_TSEC4 1 -#define CONFIG_TSEC4_NAME "eTSEC4" - -#define TSEC1_PHY_ADDR 0x1F -#define TSEC2_PHY_ADDR 0x00 -#define TSEC3_PHY_ADDR 0x01 -#define TSEC4_PHY_ADDR 0x02 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC3_FLAGS TSEC_GIGABIT -#define TSEC4_FLAGS TSEC_GIGABIT - -#define CONFIG_SYS_TBIPA_VALUE 0x1e/* Set TBI address not to conflict with TSEC1_PHY_ADDR */ - -#define CONFIG_ETHPRIME "eTSEC1" - -#endif /* CONFIG_TSEC_ENET */ - -/* -* BAT0 2G Cacheable, non-guarded -* 0x0000_0000 2G DDR -*/ -#define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) -#define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U - -/* -* BAT1 1G Cache-inhibited, guarded -* 0x8000_0000 512M PCI-Express 1 Memory -* 0xa000_0000 512M PCI-Express 2 Memory -* Changed it for operating from 0xd0000000 -*/ -#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U - -/* -* BAT2 512M Cache-inhibited, guarded -* 0xc000_0000 512M RapidIO Memory -*/ -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U - -/* -* BAT3 4M Cache-inhibited, guarded -* 0xf800_0000 4M CCSR -*/ -#define CONFIG_SYS_DBAT3L ( CONFIG_SYS_CCSRBAR | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U - -#if (CONFIG_SYS_CCSRBAR_DEFAULT !=CONFIG_SYS_CCSRBAR ) -#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATL_PP_RW | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATU_BL_1M | BATU_VS | BATU_VP) -#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \ - | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU -#endif - -/* -* BAT4 32M Cache-inhibited, guarded -* 0xe200_0000 16M PCI-Express 1 I/O -* 0xe300_0000 16M PCI-Express 2 I/0 -* Note that this is at 0xe0000000 -*/ -#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U - -/* -* BAT5 128K Cacheable, non-guarded -* 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) -*/ -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L -#define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U - -/* -* BAT6 32M Cache-inhibited, guarded -* 0xfe00_0000 32M FLASH -*/ -#define CONFIG_SYS_DBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U - -/* Map the last 1M of flash where we're running from reset */ -#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ - | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY - -#define CONFIG_SYS_DBAT7L 0x00000000 -#define CONFIG_SYS_DBAT7U 0x00000000 -#define CONFIG_SYS_IBAT7L 0x00000000 -#define CONFIG_SYS_IBAT7U 0x00000000 - -/* -* Environment -*/ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) -#define CONFIG_ENV_SECT_SIZE 0x40000/* 256K(one sector) for env */ -#define CONFIG_ENV_SIZE 0x2000 - -#define CONFIG_LOADS_ECHO 1/* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1/* allow baudrate change */ - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI ) -#define CONFIG_CMD_PCI -#endif - -#undef CONFIG_WATCHDOG/* watchdog disabled */ - -/* -* Miscellaneous configurable options -*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ - -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16/* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ - -/* -* For booting Linux, the board info and command line data -* have to be in the first 8 MB of memory, since this is -* the maximum mapped by the Linux kernel during initialization. -*/ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux*/ - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_SYS_CACHELINE_SHIFT 5/*log base 2 of the above value*/ -#endif - -#if defined(CONFIG_CMD_KGDB ) -#define CONFIG_KGDB_BAUDRATE 230400/* speed to run kgdb serial port */ -#endif - -/* -* Environment Configuration -*/ - -#define CONFIG_HAS_ETH0 1 -#define CONFIG_HAS_ETH1 1 -#define CONFIG_HAS_ETH2 1 -#define CONFIG_HAS_ETH3 1 - -#define CONFIG_IPADDR 192.168.0.50 - -#define CONFIG_HOSTNAME sbc8641d -#define CONFIG_ROOTPATH "/opt/eldk/ppc_74xx" -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_NETMASK 255.255.255.0 - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10/* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS/* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=uRamdisk\0" \ - "dtbaddr=400000\0" \ - "dtbfile=sbc8641d.dtb\0" \ - "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ - "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ - "maxcpus=1" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr $ramdiskaddr $dtbaddr" - -#define CONFIG_FLASHBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "bootm ffd00000 ffb00000 ffa00000" - -#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND - -#endif /* __CONFIG_H */
cover Janitorial: powerpc: remove PowerPC non-generic boards
In reply to Masahiro YamadaQuoted 12 lines · Masahiro Yamada
PowerPC supports generic board framework, so all the PowerPC boards should be
converted(, otherwise removed).This is docmented in doc/README.generic-board, was announced in the ML again and again, and warning messages have been displayed when such boards are built.
This series clears away all non-generic boards from PowerPC arch.
I am sending it as RFC to give the board maintainers some time to take appropriate action to keep the board support.
Quoted 8 lines
If you want to keep them, please convert your board to Generic Board (with run-test) and send a patch in two weeks.
This is the _last_ call.
If you do not respend to this seris, it will be too late.I will send a non-RFC series at the end of August to really delete boards that nobody would take any action.
And I intend to take up that non-RFC series shortly after it's posted. Anything after that point can be brought back from the graveyard rather than still being in-tree. Thanks Masahiro!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150813/2553a21a/attachment.sig>
cover Janitorial: powerpc: remove PowerPC non-generic boards
Hi Masahiro,
Quoted 20 lines · Tom Rini
Quoted 18 lines · Masahiro Yamada
PowerPC supports generic board framework, so all the PowerPC boards should be
converted(, otherwise removed).This is docmented in doc/README.generic-board, was announced in the ML again and again, and warning messages have been displayed when such boards are built.
This series clears away all non-generic boards from PowerPC arch.
I am sending it as RFC to give the board maintainers some time to take appropriate action to keep the board support.
If you want to keep them, please convert your board to Generic Board (with run-test) and send a patch in two weeks.
This is the _last_ call.
If you do not respend to this seris, it will be too late.
Quoted 6 lines
Quoted 2 lines
I will send a non-RFC series at the end of August to really delete boards that nobody would take any action.
And I intend to take up that non-RFC series shortly after it's posted. Anything after that point can be brought back from the graveyard rather than still being in-tree. Thanks Masahiro!
Thanks Masahiro for taking on this valuable work.
Regards,
Simon