Skip to contentSkip to conversation

Janitorial: powerpc: remove PowerPC non-generic boards

RFC PATCH New Masahiro Yamada 7 participants 39 messages Aug 13, 2015 – Aug 14, 2015 PowerPC

lore
Share & tools
lore
#0 lore raw

cover Janitorial: powerpc: remove PowerPC non-generic boards

PowerPC supports generic board framework, so all the PowerPC boards should be converted(, otherwise removed).

This is docmented in doc/README.generic-board, was announced in the ML again and again, and warning messages have been displayed when such boards are built.

This series clears away all non-generic boards from PowerPC arch.

I am sending it as RFC to give the board maintainers some time to take appropriate action to keep the board support.

If you want to keep them, please convert your board to Generic Board (with run-test) and send a patch in two weeks.

This is the _last_ call.
If you do not respend to this seris, it will be too late.

I will send a non-RFC series at the end of August to really delete boards that nobody would take any action.

Masahiro Yamada (28):
powerpc: remove alpr support
powerpc: remove csb272, csb472 support
powerpc: remove lwmon5 support
powerpc: remove p3p440 support
powerpc: remove pcs440ep support
powerpc: remove sbc405 support
powerpc: remove zeus support
powerpc: remove cmi_mpc5xx support
powerpc: remove canmb board support
powerpc: remove inka4x0 support
powerpc: remove ipek01 support
powerpc: remove jupiter support
powerpc: remove motionpro support
powerpc: remove munices support
powerpc: remove pcm030 support
powerpc: remove v38b support
powerpc: remove socrates support
powerpc: remove stxgp3, stxssa support
powerpc: remove MPC8540ADS support
powerpc: remove MPC8541CDS support
powerpc: remove MPC8544DS support
powerpc: remove MPC8548CDS support
powerpc: remove MPC8555CDS support
powerpc: remove MPC8560ADS support
powerpc: remove MPC8568MDS support
powerpc: remove MPC8569MDS support
powerpc: remove MPC8610HPCD support
powerpc: remove sbc8641d support

 arch/powerpc/cpu/mpc5xx/Kconfig               |   4 -
 arch/powerpc/cpu/mpc5xxx/Kconfig              |  32 --
 arch/powerpc/cpu/mpc85xx/Kconfig              |  44 --
 arch/powerpc/cpu/mpc86xx/Kconfig              |   8 -
 arch/powerpc/cpu/ppc4xx/Kconfig               |  33 --
 board/canmb/Kconfig                           |   9 -
 board/canmb/MAINTAINERS                       |   6 -
 board/canmb/Makefile                          |   9 -
 board/canmb/canmb.c                           | 183 ------
 board/canmb/mt48lc16m32s2-75.h                |  14 -
 board/cmi/Kconfig                             |   9 -
 board/cmi/MAINTAINERS                         |   6 -
 board/cmi/Makefile                            |   8 -
 board/cmi/README                              |  84 ---
 board/cmi/cmi.c                               |  57 --
 board/cmi/flash.c                             | 501 -----------------
 board/csb272/Kconfig                          |   9 -
 board/csb272/MAINTAINERS                      |   6 -
 board/csb272/Makefile                         |   9 -
 board/csb272/csb272.c                         | 171 ------
 board/csb272/init.S                           | 196 -------
 board/csb472/Kconfig                          |   9 -
 board/csb472/MAINTAINERS                      |   6 -
 board/csb472/Makefile                         |   9 -
 board/csb472/csb472.c                         | 138 -----
 board/csb472/init.S                           | 192 -------
 board/freescale/mpc8540ads/Kconfig            |  12 -
 board/freescale/mpc8540ads/MAINTAINERS        |   6 -
 board/freescale/mpc8540ads/Makefile           |  11 -
 board/freescale/mpc8540ads/ddr.c              |  46 --
 board/freescale/mpc8540ads/law.c              |  42 --
 board/freescale/mpc8540ads/mpc8540ads.c       | 242 --------
 board/freescale/mpc8540ads/tlb.c              |  95 ----
 board/freescale/mpc8541cds/Kconfig            |  12 -
 board/freescale/mpc8541cds/MAINTAINERS        |   7 -
 board/freescale/mpc8541cds/Makefile           |  12 -
 board/freescale/mpc8541cds/ddr.c              |  56 --
 board/freescale/mpc8541cds/law.c              |  42 --
 board/freescale/mpc8541cds/mpc8541cds.c       | 427 --------------
 board/freescale/mpc8541cds/tlb.c              |  96 ----
 board/freescale/mpc8544ds/Kconfig             |  12 -
 board/freescale/mpc8544ds/MAINTAINERS         |   6 -
 board/freescale/mpc8544ds/Makefile            |  12 -
 board/freescale/mpc8544ds/README              | 122 ----
 board/freescale/mpc8544ds/ddr.c               |  59 --
 board/freescale/mpc8544ds/law.c               |  18 -
 board/freescale/mpc8544ds/mpc8544ds.c         | 320 -----------
 board/freescale/mpc8544ds/tlb.c               |  75 ---
 board/freescale/mpc8548cds/Kconfig            |  12 -
 board/freescale/mpc8548cds/MAINTAINERS        |   8 -
 board/freescale/mpc8548cds/Makefile           |  12 -
 board/freescale/mpc8548cds/ddr.c              |  56 --
 board/freescale/mpc8548cds/law.c              |  19 -
 board/freescale/mpc8548cds/mpc8548cds.c       | 358 ------------
 board/freescale/mpc8548cds/tlb.c              |  87 ---
 board/freescale/mpc8555cds/Kconfig            |  12 -
 board/freescale/mpc8555cds/MAINTAINERS        |   7 -
 board/freescale/mpc8555cds/Makefile           |  12 -
 board/freescale/mpc8555cds/ddr.c              |  56 --
 board/freescale/mpc8555cds/law.c              |  42 --
 board/freescale/mpc8555cds/mpc8555cds.c       | 428 --------------
 board/freescale/mpc8555cds/tlb.c              |  96 ----
 board/freescale/mpc8560ads/Kconfig            |  12 -
 board/freescale/mpc8560ads/MAINTAINERS        |   6 -
 board/freescale/mpc8560ads/Makefile           |  11 -
 board/freescale/mpc8560ads/ddr.c              |  46 --
 board/freescale/mpc8560ads/law.c              |  42 --
 board/freescale/mpc8560ads/mpc8560ads.c       | 462 ---------------
 board/freescale/mpc8560ads/tlb.c              |  95 ----
 board/freescale/mpc8568mds/Kconfig            |  12 -
 board/freescale/mpc8568mds/MAINTAINERS        |   6 -
 board/freescale/mpc8568mds/Makefile           |  13 -
 board/freescale/mpc8568mds/bcsr.c             |  61 --
 board/freescale/mpc8568mds/bcsr.h             |  93 ----
 board/freescale/mpc8568mds/ddr.c              |  56 --
 board/freescale/mpc8568mds/law.c              |  41 --
 board/freescale/mpc8568mds/mpc8568mds.c       | 356 ------------
 board/freescale/mpc8568mds/tlb.c              |  84 ---
 board/freescale/mpc8569mds/Kconfig            |  12 -
 board/freescale/mpc8569mds/MAINTAINERS        |   7 -
 board/freescale/mpc8569mds/Makefile           |  13 -
 board/freescale/mpc8569mds/README             |  77 ---
 board/freescale/mpc8569mds/bcsr.c             |  50 --
 board/freescale/mpc8569mds/bcsr.h             |  72 ---
 board/freescale/mpc8569mds/ddr.c              |  66 ---
 board/freescale/mpc8569mds/law.c              |  41 --
 board/freescale/mpc8569mds/mpc8569mds.c       | 585 -------------------
 board/freescale/mpc8569mds/tlb.c              |  95 ----
 board/freescale/mpc8610hpcd/Kconfig           |  12 -
 board/freescale/mpc8610hpcd/MAINTAINERS       |   6 -
 board/freescale/mpc8610hpcd/Makefile          |   9 -
 board/freescale/mpc8610hpcd/README            |  73 ---
 board/freescale/mpc8610hpcd/ddr.c             |  59 --
 board/freescale/mpc8610hpcd/law.c             |  22 -
 board/freescale/mpc8610hpcd/mpc8610hpcd.c     | 329 -----------
 board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c |  71 ---
 board/inka4x0/Kconfig                         |   9 -
 board/inka4x0/MAINTAINERS                     |   6 -
 board/inka4x0/Makefile                        |   8 -
 board/inka4x0/inka4x0.c                       | 250 ---------
 board/inka4x0/inkadiag.c                      | 464 ---------------
 board/inka4x0/k4h511638c.h                    |  16 -
 board/inka4x0/mt46v16m16-75.h                 |  16 -
 board/inka4x0/mt46v32m16-75.h                 |  16 -
 board/inka4x0/mt48lc16m16a2-75.h              |  14 -
 board/ipek01/Kconfig                          |   9 -
 board/ipek01/MAINTAINERS                      |   6 -
 board/ipek01/Makefile                         |   8 -
 board/ipek01/ipek01.c                         | 268 ---------
 board/jupiter/Kconfig                         |   9 -
 board/jupiter/MAINTAINERS                     |   6 -
 board/jupiter/Makefile                        |   8 -
 board/jupiter/jupiter.c                       | 292 ----------
 board/lwmon5/Kconfig                          |   9 -
 board/lwmon5/MAINTAINERS                      |   7 -
 board/lwmon5/Makefile                         |   9 -
 board/lwmon5/config.mk                        |  18 -
 board/lwmon5/init.S                           |  75 ---
 board/lwmon5/kbd.c                            | 490 ----------------
 board/lwmon5/lwmon5.c                         | 558 -------------------
 board/lwmon5/sdram.c                          | 247 --------
 board/motionpro/Kconfig                       |   9 -
 board/motionpro/MAINTAINERS                   |   6 -
 board/motionpro/Makefile                      |   8 -
 board/motionpro/motionpro.c                   | 220 --------
 board/munices/Kconfig                         |   9 -
 board/munices/MAINTAINERS                     |   6 -
 board/munices/Makefile                        |   8 -
 board/munices/mt48lc16m16a2-75.h              |  14 -
 board/munices/munices.c                       | 155 ------
 board/pcs440ep/Kconfig                        |   9 -
 board/pcs440ep/MAINTAINERS                    |   6 -
 board/pcs440ep/Makefile                       |   9 -
 board/pcs440ep/config.mk                      |  23 -
 board/pcs440ep/flash.c                        | 607 --------------------
 board/pcs440ep/init.S                         |  56 --
 board/pcs440ep/pcs440ep.c                     | 755 -------------------------
 board/phytec/pcm030/Kconfig                   |  12 -
 board/phytec/pcm030/MAINTAINERS               |   7 -
 board/phytec/pcm030/Makefile                  |   8 -
 board/phytec/pcm030/README                    |  42 --
 board/phytec/pcm030/mt46v32m16-75.h           |  21 -
 board/phytec/pcm030/pcm030.c                  | 205 -------
 board/prodrive/alpr/Kconfig                   |  12 -
 board/prodrive/alpr/MAINTAINERS               |   6 -
 board/prodrive/alpr/Makefile                  |   9 -
 board/prodrive/alpr/alpr.c                    | 215 -------
 board/prodrive/alpr/config.mk                 |  16 -
 board/prodrive/alpr/fpga.c                    | 239 --------
 board/prodrive/alpr/init.S                    |  53 --
 board/prodrive/alpr/nand.c                    | 124 -----
 board/prodrive/p3p440/Kconfig                 |  12 -
 board/prodrive/p3p440/MAINTAINERS             |   6 -
 board/prodrive/p3p440/Makefile                |   9 -
 board/prodrive/p3p440/config.mk               |  16 -
 board/prodrive/p3p440/init.S                  |  38 --
 board/prodrive/p3p440/p3p440.c                | 177 ------
 board/prodrive/p3p440/p3p440.h                |  24 -
 board/sbc405/Kconfig                          |   9 -
 board/sbc405/MAINTAINERS                      |   6 -
 board/sbc405/Makefile                         |   8 -
 board/sbc405/sbc405.c                         |  91 ---
 board/sbc405/strataflash.c                    | 774 --------------------------
 board/sbc8641d/Kconfig                        |   9 -
 board/sbc8641d/MAINTAINERS                    |   6 -
 board/sbc8641d/Makefile                       |  10 -
 board/sbc8641d/README                         |  28 -
 board/sbc8641d/ddr.c                          |  56 --
 board/sbc8641d/law.c                          |  40 --
 board/sbc8641d/sbc8641d.c                     | 261 ---------
 board/socrates/Kconfig                        |   9 -
 board/socrates/MAINTAINERS                    |   6 -
 board/socrates/Makefile                       |  15 -
 board/socrates/ddr.c                          |  56 --
 board/socrates/law.c                          |  44 --
 board/socrates/nand.c                         | 163 ------
 board/socrates/sdram.c                        |  96 ----
 board/socrates/socrates.c                     | 434 ---------------
 board/socrates/tlb.c                          | 105 ----
 board/socrates/upm_table.h                    |  59 --
 board/stx/stxgp3/Kconfig                      |  12 -
 board/stx/stxgp3/MAINTAINERS                  |   6 -
 board/stx/stxgp3/Makefile                     |  12 -
 board/stx/stxgp3/ddr.c                        |  46 --
 board/stx/stxgp3/flash.c                      | 499 -----------------
 board/stx/stxgp3/law.c                        |  42 --
 board/stx/stxgp3/stxgp3.c                     | 331 -----------
 board/stx/stxgp3/tlb.c                        | 114 ----
 board/stx/stxssa/Kconfig                      |  12 -
 board/stx/stxssa/MAINTAINERS                  |   7 -
 board/stx/stxssa/Makefile                     |  11 -
 board/stx/stxssa/ddr.c                        |  47 --
 board/stx/stxssa/law.c                        |  44 --
 board/stx/stxssa/stxssa.c                     | 370 ------------
 board/stx/stxssa/tlb.c                        |  90 ---
 board/v38b/Kconfig                            |   9 -
 board/v38b/MAINTAINERS                        |   6 -
 board/v38b/Makefile                           |   8 -
 board/v38b/ethaddr.c                          | 197 -------
 board/v38b/v38b.c                             | 260 ---------
 board/zeus/Kconfig                            |   9 -
 board/zeus/MAINTAINERS                        |   6 -
 board/zeus/Makefile                           |   8 -
 board/zeus/README                             |  73 ---
 board/zeus/update.c                           |  89 ---
 board/zeus/zeus.c                             | 410 --------------
 configs/MPC8540ADS_defconfig                  |   3 -
 configs/MPC8541CDS_defconfig                  |   3 -
 configs/MPC8541CDS_legacy_defconfig           |   4 -
 configs/MPC8544DS_defconfig                   |   3 -
 configs/MPC8548CDS_36BIT_defconfig            |   4 -
 configs/MPC8548CDS_defconfig                  |   3 -
 configs/MPC8548CDS_legacy_defconfig           |   4 -
 configs/MPC8555CDS_defconfig                  |   3 -
 configs/MPC8555CDS_legacy_defconfig           |   4 -
 configs/MPC8560ADS_defconfig                  |   3 -
 configs/MPC8568MDS_defconfig                  |   3 -
 configs/MPC8569MDS_ATM_defconfig              |   4 -
 configs/MPC8569MDS_defconfig                  |   3 -
 configs/MPC8610HPCD_defconfig                 |   4 -
 configs/alpr_defconfig                        |   7 -
 configs/canmb_defconfig                       |   4 -
 configs/cmi_mpc5xx_defconfig                  |   6 -
 configs/csb272_defconfig                      |   4 -
 configs/csb472_defconfig                      |   4 -
 configs/inka4x0_defconfig                     |   4 -
 configs/ipek01_defconfig                      |   4 -
 configs/jupiter_defconfig                     |   4 -
 configs/lcd4_lwmon5_defconfig                 |   6 -
 configs/lwmon5_defconfig                      |   4 -
 configs/motionpro_defconfig                   |   7 -
 configs/munices_defconfig                     |   4 -
 configs/p3p440_defconfig                      |   4 -
 configs/pcm030_LOWBOOT_defconfig              |   5 -
 configs/pcm030_defconfig                      |   4 -
 configs/pcs440ep_defconfig                    |   4 -
 configs/sbc405_defconfig                      |   4 -
 configs/sbc8641d_defconfig                    |   4 -
 configs/socrates_defconfig                    |   5 -
 configs/stxgp3_defconfig                      |   4 -
 configs/stxssa_4M_defconfig                   |   5 -
 configs/stxssa_defconfig                      |   4 -
 configs/v38b_defconfig                        |   4 -
 configs/zeus_defconfig                        |   4 -
 include/configs/MPC8540ADS.h                  | 448 ---------------
 include/configs/MPC8541CDS.h                  | 465 ----------------
 include/configs/MPC8544DS.h                   | 514 -----------------
 include/configs/MPC8548CDS.h                  | 605 --------------------
 include/configs/MPC8555CDS.h                  | 461 ---------------
 include/configs/MPC8560ADS.h                  | 488 ----------------
 include/configs/MPC8568MDS.h                  | 490 ----------------
 include/configs/MPC8569MDS.h                  | 583 -------------------
 include/configs/MPC8610HPCD.h                 | 666 ----------------------
 include/configs/alpr.h                        | 351 ------------
 include/configs/canmb.h                       | 211 -------
 include/configs/cmi_mpc5xx.h                  | 240 --------
 include/configs/csb272.h                      | 282 ----------
 include/configs/csb472.h                      | 281 ----------
 include/configs/inka4x0.h                     | 413 --------------
 include/configs/ipek01.h                      | 374 -------------
 include/configs/jupiter.h                     | 282 ----------
 include/configs/lwmon5.h                      | 692 -----------------------
 include/configs/motionpro.h                   | 390 -------------
 include/configs/munices.h                     | 197 -------
 include/configs/p3p440.h                      | 302 ----------
 include/configs/pcm030.h                      | 430 --------------
 include/configs/pcs440ep.h                    | 457 ---------------
 include/configs/sbc405.h                      | 252 ---------
 include/configs/sbc8641d.h                    | 590 --------------------
 include/configs/socrates.h                    | 446 ---------------
 include/configs/stxgp3.h                      | 355 ------------
 include/configs/stxssa.h                      | 441 ---------------
 include/configs/v38b.h                        | 333 -----------
 include/configs/zeus.h                        | 350 ------------
 274 files changed, 31200 deletions(-)
 delete mode 100644 board/canmb/Kconfig
 delete mode 100644 board/canmb/MAINTAINERS
 delete mode 100644 board/canmb/Makefile
 delete mode 100644 board/canmb/canmb.c
 delete mode 100644 board/canmb/mt48lc16m32s2-75.h
 delete mode 100644 board/cmi/Kconfig
 delete mode 100644 board/cmi/MAINTAINERS
 delete mode 100644 board/cmi/Makefile
 delete mode 100644 board/cmi/README
 delete mode 100644 board/cmi/cmi.c
 delete mode 100644 board/cmi/flash.c
 delete mode 100644 board/csb272/Kconfig
 delete mode 100644 board/csb272/MAINTAINERS
 delete mode 100644 board/csb272/Makefile
 delete mode 100644 board/csb272/csb272.c
 delete mode 100644 board/csb272/init.S
 delete mode 100644 board/csb472/Kconfig
 delete mode 100644 board/csb472/MAINTAINERS
 delete mode 100644 board/csb472/Makefile
 delete mode 100644 board/csb472/csb472.c
 delete mode 100644 board/csb472/init.S
 delete mode 100644 board/freescale/mpc8540ads/Kconfig
 delete mode 100644 board/freescale/mpc8540ads/MAINTAINERS
 delete mode 100644 board/freescale/mpc8540ads/Makefile
 delete mode 100644 board/freescale/mpc8540ads/ddr.c
 delete mode 100644 board/freescale/mpc8540ads/law.c
 delete mode 100644 board/freescale/mpc8540ads/mpc8540ads.c
 delete mode 100644 board/freescale/mpc8540ads/tlb.c
 delete mode 100644 board/freescale/mpc8541cds/Kconfig
 delete mode 100644 board/freescale/mpc8541cds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8541cds/Makefile
 delete mode 100644 board/freescale/mpc8541cds/ddr.c
 delete mode 100644 board/freescale/mpc8541cds/law.c
 delete mode 100644 board/freescale/mpc8541cds/mpc8541cds.c
 delete mode 100644 board/freescale/mpc8541cds/tlb.c
 delete mode 100644 board/freescale/mpc8544ds/Kconfig
 delete mode 100644 board/freescale/mpc8544ds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8544ds/Makefile
 delete mode 100644 board/freescale/mpc8544ds/README
 delete mode 100644 board/freescale/mpc8544ds/ddr.c
 delete mode 100644 board/freescale/mpc8544ds/law.c
 delete mode 100644 board/freescale/mpc8544ds/mpc8544ds.c
 delete mode 100644 board/freescale/mpc8544ds/tlb.c
 delete mode 100644 board/freescale/mpc8548cds/Kconfig
 delete mode 100644 board/freescale/mpc8548cds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8548cds/Makefile
 delete mode 100644 board/freescale/mpc8548cds/ddr.c
 delete mode 100644 board/freescale/mpc8548cds/law.c
 delete mode 100644 board/freescale/mpc8548cds/mpc8548cds.c
 delete mode 100644 board/freescale/mpc8548cds/tlb.c
 delete mode 100644 board/freescale/mpc8555cds/Kconfig
 delete mode 100644 board/freescale/mpc8555cds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8555cds/Makefile
 delete mode 100644 board/freescale/mpc8555cds/ddr.c
 delete mode 100644 board/freescale/mpc8555cds/law.c
 delete mode 100644 board/freescale/mpc8555cds/mpc8555cds.c
 delete mode 100644 board/freescale/mpc8555cds/tlb.c
 delete mode 100644 board/freescale/mpc8560ads/Kconfig
 delete mode 100644 board/freescale/mpc8560ads/MAINTAINERS
 delete mode 100644 board/freescale/mpc8560ads/Makefile
 delete mode 100644 board/freescale/mpc8560ads/ddr.c
 delete mode 100644 board/freescale/mpc8560ads/law.c
 delete mode 100644 board/freescale/mpc8560ads/mpc8560ads.c
 delete mode 100644 board/freescale/mpc8560ads/tlb.c
 delete mode 100644 board/freescale/mpc8568mds/Kconfig
 delete mode 100644 board/freescale/mpc8568mds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8568mds/Makefile
 delete mode 100644 board/freescale/mpc8568mds/bcsr.c
 delete mode 100644 board/freescale/mpc8568mds/bcsr.h
 delete mode 100644 board/freescale/mpc8568mds/ddr.c
 delete mode 100644 board/freescale/mpc8568mds/law.c
 delete mode 100644 board/freescale/mpc8568mds/mpc8568mds.c
 delete mode 100644 board/freescale/mpc8568mds/tlb.c
 delete mode 100644 board/freescale/mpc8569mds/Kconfig
 delete mode 100644 board/freescale/mpc8569mds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8569mds/Makefile
 delete mode 100644 board/freescale/mpc8569mds/README
 delete mode 100644 board/freescale/mpc8569mds/bcsr.c
 delete mode 100644 board/freescale/mpc8569mds/bcsr.h
 delete mode 100644 board/freescale/mpc8569mds/ddr.c
 delete mode 100644 board/freescale/mpc8569mds/law.c
 delete mode 100644 board/freescale/mpc8569mds/mpc8569mds.c
 delete mode 100644 board/freescale/mpc8569mds/tlb.c
 delete mode 100644 board/freescale/mpc8610hpcd/Kconfig
 delete mode 100644 board/freescale/mpc8610hpcd/MAINTAINERS
 delete mode 100644 board/freescale/mpc8610hpcd/Makefile
 delete mode 100644 board/freescale/mpc8610hpcd/README
 delete mode 100644 board/freescale/mpc8610hpcd/ddr.c
 delete mode 100644 board/freescale/mpc8610hpcd/law.c
 delete mode 100644 board/freescale/mpc8610hpcd/mpc8610hpcd.c
 delete mode 100644 board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
 delete mode 100644 board/inka4x0/Kconfig
 delete mode 100644 board/inka4x0/MAINTAINERS
 delete mode 100644 board/inka4x0/Makefile
 delete mode 100644 board/inka4x0/inka4x0.c
 delete mode 100644 board/inka4x0/inkadiag.c
 delete mode 100644 board/inka4x0/k4h511638c.h
 delete mode 100644 board/inka4x0/mt46v16m16-75.h
 delete mode 100644 board/inka4x0/mt46v32m16-75.h
 delete mode 100644 board/inka4x0/mt48lc16m16a2-75.h
 delete mode 100644 board/ipek01/Kconfig
 delete mode 100644 board/ipek01/MAINTAINERS
 delete mode 100644 board/ipek01/Makefile
 delete mode 100644 board/ipek01/ipek01.c
 delete mode 100644 board/jupiter/Kconfig
 delete mode 100644 board/jupiter/MAINTAINERS
 delete mode 100644 board/jupiter/Makefile
 delete mode 100644 board/jupiter/jupiter.c
 delete mode 100644 board/lwmon5/Kconfig
 delete mode 100644 board/lwmon5/MAINTAINERS
 delete mode 100644 board/lwmon5/Makefile
 delete mode 100644 board/lwmon5/config.mk
 delete mode 100644 board/lwmon5/init.S
 delete mode 100644 board/lwmon5/kbd.c
 delete mode 100644 board/lwmon5/lwmon5.c
 delete mode 100644 board/lwmon5/sdram.c
 delete mode 100644 board/motionpro/Kconfig
 delete mode 100644 board/motionpro/MAINTAINERS
 delete mode 100644 board/motionpro/Makefile
 delete mode 100644 board/motionpro/motionpro.c
 delete mode 100644 board/munices/Kconfig
 delete mode 100644 board/munices/MAINTAINERS
 delete mode 100644 board/munices/Makefile
 delete mode 100644 board/munices/mt48lc16m16a2-75.h
 delete mode 100644 board/munices/munices.c
 delete mode 100644 board/pcs440ep/Kconfig
 delete mode 100644 board/pcs440ep/MAINTAINERS
 delete mode 100644 board/pcs440ep/Makefile
 delete mode 100644 board/pcs440ep/config.mk
 delete mode 100644 board/pcs440ep/flash.c
 delete mode 100644 board/pcs440ep/init.S
 delete mode 100644 board/pcs440ep/pcs440ep.c
 delete mode 100644 board/phytec/pcm030/Kconfig
 delete mode 100644 board/phytec/pcm030/MAINTAINERS
 delete mode 100644 board/phytec/pcm030/Makefile
 delete mode 100644 board/phytec/pcm030/README
 delete mode 100644 board/phytec/pcm030/mt46v32m16-75.h
 delete mode 100644 board/phytec/pcm030/pcm030.c
 delete mode 100644 board/prodrive/alpr/Kconfig
 delete mode 100644 board/prodrive/alpr/MAINTAINERS
 delete mode 100644 board/prodrive/alpr/Makefile
 delete mode 100644 board/prodrive/alpr/alpr.c
 delete mode 100644 board/prodrive/alpr/config.mk
 delete mode 100644 board/prodrive/alpr/fpga.c
 delete mode 100644 board/prodrive/alpr/init.S
 delete mode 100644 board/prodrive/alpr/nand.c
 delete mode 100644 board/prodrive/p3p440/Kconfig
 delete mode 100644 board/prodrive/p3p440/MAINTAINERS
 delete mode 100644 board/prodrive/p3p440/Makefile
 delete mode 100644 board/prodrive/p3p440/config.mk
 delete mode 100644 board/prodrive/p3p440/init.S
 delete mode 100644 board/prodrive/p3p440/p3p440.c
 delete mode 100644 board/prodrive/p3p440/p3p440.h
 delete mode 100644 board/sbc405/Kconfig
 delete mode 100644 board/sbc405/MAINTAINERS
 delete mode 100644 board/sbc405/Makefile
 delete mode 100644 board/sbc405/sbc405.c
 delete mode 100644 board/sbc405/strataflash.c
 delete mode 100644 board/sbc8641d/Kconfig
 delete mode 100644 board/sbc8641d/MAINTAINERS
 delete mode 100644 board/sbc8641d/Makefile
 delete mode 100644 board/sbc8641d/README
 delete mode 100644 board/sbc8641d/ddr.c
 delete mode 100644 board/sbc8641d/law.c
 delete mode 100644 board/sbc8641d/sbc8641d.c
 delete mode 100644 board/socrates/Kconfig
 delete mode 100644 board/socrates/MAINTAINERS
 delete mode 100644 board/socrates/Makefile
 delete mode 100644 board/socrates/ddr.c
 delete mode 100644 board/socrates/law.c
 delete mode 100644 board/socrates/nand.c
 delete mode 100644 board/socrates/sdram.c
 delete mode 100644 board/socrates/socrates.c
 delete mode 100644 board/socrates/tlb.c
 delete mode 100644 board/socrates/upm_table.h
 delete mode 100644 board/stx/stxgp3/Kconfig
 delete mode 100644 board/stx/stxgp3/MAINTAINERS
 delete mode 100644 board/stx/stxgp3/Makefile
 delete mode 100644 board/stx/stxgp3/ddr.c
 delete mode 100644 board/stx/stxgp3/flash.c
 delete mode 100644 board/stx/stxgp3/law.c
 delete mode 100644 board/stx/stxgp3/stxgp3.c
 delete mode 100644 board/stx/stxgp3/tlb.c
 delete mode 100644 board/stx/stxssa/Kconfig
 delete mode 100644 board/stx/stxssa/MAINTAINERS
 delete mode 100644 board/stx/stxssa/Makefile
 delete mode 100644 board/stx/stxssa/ddr.c
 delete mode 100644 board/stx/stxssa/law.c
 delete mode 100644 board/stx/stxssa/stxssa.c
 delete mode 100644 board/stx/stxssa/tlb.c
 delete mode 100644 board/v38b/Kconfig
 delete mode 100644 board/v38b/MAINTAINERS
 delete mode 100644 board/v38b/Makefile
 delete mode 100644 board/v38b/ethaddr.c
 delete mode 100644 board/v38b/v38b.c
 delete mode 100644 board/zeus/Kconfig
 delete mode 100644 board/zeus/MAINTAINERS
 delete mode 100644 board/zeus/Makefile
 delete mode 100644 board/zeus/README
 delete mode 100644 board/zeus/update.c
 delete mode 100644 board/zeus/zeus.c
 delete mode 100644 configs/MPC8540ADS_defconfig
 delete mode 100644 configs/MPC8541CDS_defconfig
 delete mode 100644 configs/MPC8541CDS_legacy_defconfig
 delete mode 100644 configs/MPC8544DS_defconfig
 delete mode 100644 configs/MPC8548CDS_36BIT_defconfig
 delete mode 100644 configs/MPC8548CDS_defconfig
 delete mode 100644 configs/MPC8548CDS_legacy_defconfig
 delete mode 100644 configs/MPC8555CDS_defconfig
 delete mode 100644 configs/MPC8555CDS_legacy_defconfig
 delete mode 100644 configs/MPC8560ADS_defconfig
 delete mode 100644 configs/MPC8568MDS_defconfig
 delete mode 100644 configs/MPC8569MDS_ATM_defconfig
 delete mode 100644 configs/MPC8569MDS_defconfig
 delete mode 100644 configs/MPC8610HPCD_defconfig
 delete mode 100644 configs/alpr_defconfig
 delete mode 100644 configs/canmb_defconfig
 delete mode 100644 configs/cmi_mpc5xx_defconfig
 delete mode 100644 configs/csb272_defconfig
 delete mode 100644 configs/csb472_defconfig
 delete mode 100644 configs/inka4x0_defconfig
 delete mode 100644 configs/ipek01_defconfig
 delete mode 100644 configs/jupiter_defconfig
 delete mode 100644 configs/lcd4_lwmon5_defconfig
 delete mode 100644 configs/lwmon5_defconfig
 delete mode 100644 configs/motionpro_defconfig
 delete mode 100644 configs/munices_defconfig
 delete mode 100644 configs/p3p440_defconfig
 delete mode 100644 configs/pcm030_LOWBOOT_defconfig
 delete mode 100644 configs/pcm030_defconfig
 delete mode 100644 configs/pcs440ep_defconfig
 delete mode 100644 configs/sbc405_defconfig
 delete mode 100644 configs/sbc8641d_defconfig
 delete mode 100644 configs/socrates_defconfig
 delete mode 100644 configs/stxgp3_defconfig
 delete mode 100644 configs/stxssa_4M_defconfig
 delete mode 100644 configs/stxssa_defconfig
 delete mode 100644 configs/v38b_defconfig
 delete mode 100644 configs/zeus_defconfig
 delete mode 100644 include/configs/MPC8540ADS.h
 delete mode 100644 include/configs/MPC8541CDS.h
 delete mode 100644 include/configs/MPC8544DS.h
 delete mode 100644 include/configs/MPC8548CDS.h
 delete mode 100644 include/configs/MPC8555CDS.h
 delete mode 100644 include/configs/MPC8560ADS.h
 delete mode 100644 include/configs/MPC8568MDS.h
 delete mode 100644 include/configs/MPC8569MDS.h
 delete mode 100644 include/configs/MPC8610HPCD.h
 delete mode 100644 include/configs/alpr.h
 delete mode 100644 include/configs/canmb.h
 delete mode 100644 include/configs/cmi_mpc5xx.h
 delete mode 100644 include/configs/csb272.h
 delete mode 100644 include/configs/csb472.h
 delete mode 100644 include/configs/inka4x0.h
 delete mode 100644 include/configs/ipek01.h
 delete mode 100644 include/configs/jupiter.h
 delete mode 100644 include/configs/lwmon5.h
 delete mode 100644 include/configs/motionpro.h
 delete mode 100644 include/configs/munices.h
 delete mode 100644 include/configs/p3p440.h
 delete mode 100644 include/configs/pcm030.h
 delete mode 100644 include/configs/pcs440ep.h
 delete mode 100644 include/configs/sbc405.h
 delete mode 100644 include/configs/sbc8641d.h
 delete mode 100644 include/configs/socrates.h
 delete mode 100644 include/configs/stxgp3.h
 delete mode 100644 include/configs/stxssa.h
 delete mode 100644 include/configs/v38b.h
 delete mode 100644 include/configs/zeus.h
Signature · 1 line
1.9.1
#1 lore raw

RFC PATCH 1/28 powerpc: remove alpr support

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/ppc4xx/Kconfig |   4 -
 board/prodrive/alpr/Kconfig     |  12 --
 board/prodrive/alpr/MAINTAINERS |   6 -
 board/prodrive/alpr/Makefile    |   9 --
 board/prodrive/alpr/alpr.c      | 215 ------------------------
 board/prodrive/alpr/config.mk   |  16 --
 board/prodrive/alpr/fpga.c      | 239 ---------------------------
 board/prodrive/alpr/init.S      |  53 ------
 board/prodrive/alpr/nand.c      | 124 --------------
 configs/alpr_defconfig          |   7 -
 include/configs/alpr.h          | 351 ----------------------------------------
 11 files changed, 1036 deletions(-)
 delete mode 100644 board/prodrive/alpr/Kconfig
 delete mode 100644 board/prodrive/alpr/MAINTAINERS
 delete mode 100644 board/prodrive/alpr/Makefile
 delete mode 100644 board/prodrive/alpr/alpr.c
 delete mode 100644 board/prodrive/alpr/config.mk
 delete mode 100644 board/prodrive/alpr/fpga.c
 delete mode 100644 board/prodrive/alpr/init.S
 delete mode 100644 board/prodrive/alpr/nand.c
 delete mode 100644 configs/alpr_defconfig
 delete mode 100644 include/configs/alpr.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
index 10b86e0..e8c0ca0 100644
@@ -140,9 +140,6 @@ config TARGET_MIP405
 config TARGET_PIP405
 	bool "Support PIP405"
 
-config TARGET_ALPR
-	bool "Support alpr"
-
 config TARGET_P3P440
 	bool "Support p3p440"
 
@@ -197,7 +194,6 @@ source "board/mosaixtech/icon/Kconfig"
 source "board/mpl/mip405/Kconfig"
 source "board/mpl/pip405/Kconfig"
 source "board/pcs440ep/Kconfig"
-source "board/prodrive/alpr/Kconfig"
 source "board/prodrive/p3p440/Kconfig"
 source "board/sbc405/Kconfig"
 source "board/t3corp/Kconfig"
board/prodrive/alpr/Kconfig deleted +0 -12
deleted file mode 100644
index 543b455..0000000
@@ -1,12 +0,0 @@
-if TARGET_ALPR
-
-config SYS_BOARD
-	default "alpr"
-
-config SYS_VENDOR
-	default "prodrive"
-
-config SYS_CONFIG_NAME
-	default "alpr"
-
-endif
board/prodrive/alpr/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 31baabb..0000000
@@ -1,6 +0,0 @@
-ALPR BOARD
-M:	Stefan Roese <[email protected]>
-S:	Maintained
-F:	board/prodrive/alpr/
-F:	include/configs/alpr.h
-F:	configs/alpr_defconfig
board/prodrive/alpr/Makefile deleted +0 -9
deleted file mode 100644
index 812d041..0000000
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= alpr.o fpga.o nand.o
-extra-y	+= init.o
board/prodrive/alpr/alpr.c deleted +0 -215

215 lines not on this page · raw message

board/prodrive/alpr/config.mk deleted +0 -16
deleted file mode 100644
index 0ccb2e6..0000000
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
board/prodrive/alpr/fpga.c deleted +0 -239

239 lines not on this page · raw message

board/prodrive/alpr/init.S deleted +0 -53

53 lines not on this page · raw message

board/prodrive/alpr/nand.c deleted +0 -124

124 lines not on this page · raw message

configs/alpr_defconfig deleted +0 -7
deleted file mode 100644
index b7cd74d..0000000
@@ -1,7 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_ALPR=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
include/configs/alpr.h deleted +0 -351

351 lines not on this page · raw message

Signature · 1 line
1.9.1
#2 lore raw

RFC PATCH 2/28 powerpc: remove csb272, csb472 support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/ppc4xx/Kconfig |   8 --
 board/csb272/Kconfig            |   9 --
 board/csb272/MAINTAINERS        |   6 -
 board/csb272/Makefile           |   9 --
 board/csb272/csb272.c           | 171 ------------------------
 board/csb272/init.S             | 196 ----------------------------
 board/csb472/Kconfig            |   9 --
 board/csb472/MAINTAINERS        |   6 -
 board/csb472/Makefile           |   9 --
 board/csb472/csb472.c           | 138 --------------------
 board/csb472/init.S             | 192 ---------------------------
 configs/csb272_defconfig        |   4 -
 configs/csb472_defconfig        |   4 -
 include/configs/csb272.h        | 282 ----------------------------------------
 include/configs/csb472.h        | 281 ---------------------------------------
 15 files changed, 1324 deletions(-)
 delete mode 100644 board/csb272/Kconfig
 delete mode 100644 board/csb272/MAINTAINERS
 delete mode 100644 board/csb272/Makefile
 delete mode 100644 board/csb272/csb272.c
 delete mode 100644 board/csb272/init.S
 delete mode 100644 board/csb472/Kconfig
 delete mode 100644 board/csb472/MAINTAINERS
 delete mode 100644 board/csb472/Makefile
 delete mode 100644 board/csb472/csb472.c
 delete mode 100644 board/csb472/init.S
 delete mode 100644 configs/csb272_defconfig
 delete mode 100644 configs/csb472_defconfig
 delete mode 100644 include/configs/csb272.h
 delete mode 100644 include/configs/csb472.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -8
index e8c0ca0..c6bbe12 100644
@@ -8,12 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_CSB272
-	bool "Support csb272"
-
-config TARGET_CSB472
-	bool "Support csb472"
-
 config TARGET_LWMON5
 	bool "Support lwmon5"
 	select SUPPORT_SPL
@@ -176,8 +170,6 @@ source "board/amcc/yosemite/Kconfig"
 source "board/amcc/yucca/Kconfig"
 source "board/avnet/fx12mm/Kconfig"
 source "board/avnet/v5fx30teval/Kconfig"
-source "board/csb272/Kconfig"
-source "board/csb472/Kconfig"
 source "board/esd/cpci2dp/Kconfig"
 source "board/esd/cpci405/Kconfig"
 source "board/esd/plu405/Kconfig"
board/csb272/Kconfig deleted +0 -9
deleted file mode 100644
index eed04f0..0000000
@@ -1,9 +0,0 @@
-if TARGET_CSB272
-
-config SYS_BOARD
-	default "csb272"
-
-config SYS_CONFIG_NAME
-	default "csb272"
-
-endif
board/csb272/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 4bc95ea..0000000
@@ -1,6 +0,0 @@
-CSB272 BOARD
-M:	Tolunay Orkun <[email protected]>
-S:	Maintained
-F:	board/csb272/
-F:	include/configs/csb272.h
-F:	configs/csb272_defconfig
board/csb272/Makefile deleted +0 -9
deleted file mode 100644
index 36ec9b6..0000000
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= csb272.o
-obj-y	+= init.o
board/csb272/csb272.c deleted +0 -171

171 lines not on this page · raw message

board/csb272/init.S deleted +0 -196

196 lines not on this page · raw message

board/csb472/Kconfig deleted +0 -9
deleted file mode 100644
index 53b1e7a..0000000
@@ -1,9 +0,0 @@
-if TARGET_CSB472
-
-config SYS_BOARD
-	default "csb472"
-
-config SYS_CONFIG_NAME
-	default "csb472"
-
-endif
board/csb472/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 25041ed..0000000
@@ -1,6 +0,0 @@
-CSB472 BOARD
-M:	Tolunay Orkun <[email protected]>
-S:	Maintained
-F:	board/csb472/
-F:	include/configs/csb472.h
-F:	configs/csb472_defconfig
board/csb472/Makefile deleted +0 -9
deleted file mode 100644
index 5f7e8b5..0000000
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= csb472.o
-obj-y	+= init.o
board/csb472/csb472.c deleted +0 -138

138 lines not on this page · raw message

board/csb472/init.S deleted +0 -192

192 lines not on this page · raw message

configs/csb272_defconfig deleted +0 -4
deleted file mode 100644
index c9cc680..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_CSB272=y
-# CONFIG_CMD_SETEXPR is not set
configs/csb472_defconfig deleted +0 -4
deleted file mode 100644
index e46b965..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_CSB472=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/csb272.h deleted +0 -282

282 lines not on this page · raw message

include/configs/csb472.h deleted +0 -281

281 lines not on this page · raw message

Signature · 1 line
1.9.1
#3 lore raw

RFC PATCH 3/28 powerpc: remove lwmon5 support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/ppc4xx/Kconfig |   5 -
 board/lwmon5/Kconfig            |   9 -
 board/lwmon5/MAINTAINERS        |   7 -
 board/lwmon5/Makefile           |   9 -
 board/lwmon5/config.mk          |  18 --
 board/lwmon5/init.S             |  75 -----
 board/lwmon5/kbd.c              | 490 ----------------------------
 board/lwmon5/lwmon5.c           | 558 --------------------------------
 board/lwmon5/sdram.c            | 247 --------------
 configs/lcd4_lwmon5_defconfig   |   6 -
 configs/lwmon5_defconfig        |   4 -
 include/configs/lwmon5.h        | 692 ----------------------------------------
 12 files changed, 2120 deletions(-)
 delete mode 100644 board/lwmon5/Kconfig
 delete mode 100644 board/lwmon5/MAINTAINERS
 delete mode 100644 board/lwmon5/Makefile
 delete mode 100644 board/lwmon5/config.mk
 delete mode 100644 board/lwmon5/init.S
 delete mode 100644 board/lwmon5/kbd.c
 delete mode 100644 board/lwmon5/lwmon5.c
 delete mode 100644 board/lwmon5/sdram.c
 delete mode 100644 configs/lcd4_lwmon5_defconfig
 delete mode 100644 configs/lwmon5_defconfig
 delete mode 100644 include/configs/lwmon5.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -5
index c6bbe12..883463a 100644
@@ -8,10 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_LWMON5
-	bool "Support lwmon5"
-	select SUPPORT_SPL
-
 config TARGET_PCS440EP
 	bool "Support pcs440ep"
 
@@ -181,7 +177,6 @@ source "board/gdsys/405ex/Kconfig"
 source "board/gdsys/dlvision/Kconfig"
 source "board/gdsys/gdppc440etx/Kconfig"
 source "board/gdsys/intip/Kconfig"
-source "board/lwmon5/Kconfig"
 source "board/mosaixtech/icon/Kconfig"
 source "board/mpl/mip405/Kconfig"
 source "board/mpl/pip405/Kconfig"
board/lwmon5/Kconfig deleted +0 -9
deleted file mode 100644
index 90566d8..0000000
@@ -1,9 +0,0 @@
-if TARGET_LWMON5
-
-config SYS_BOARD
-	default "lwmon5"
-
-config SYS_CONFIG_NAME
-	default "lwmon5"
-
-endif
board/lwmon5/MAINTAINERS deleted +0 -7
deleted file mode 100644
index 7402ab6..0000000
@@ -1,7 +0,0 @@
-LWMON5 BOARD
-M:	Stefan Roese <[email protected]>
-S:	Maintained
-F:	board/lwmon5/
-F:	include/configs/lwmon5.h
-F:	configs/lcd4_lwmon5_defconfig
-F:	configs/lwmon5_defconfig
board/lwmon5/Makefile deleted +0 -9
deleted file mode 100644
index 02478ca..0000000
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= lwmon5.o kbd.o sdram.o
-extra-y	+= init.o
board/lwmon5/config.mk deleted +0 -18
deleted file mode 100644
index d0348e8..0000000
@@ -1,18 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-# lwmon5 (440EPx)
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
board/lwmon5/init.S deleted +0 -75

75 lines not on this page · raw message

board/lwmon5/kbd.c deleted +0 -490

490 lines not on this page · raw message

board/lwmon5/lwmon5.c deleted +0 -558

558 lines not on this page · raw message

board/lwmon5/sdram.c deleted +0 -247

247 lines not on this page · raw message

configs/lcd4_lwmon5_defconfig deleted +0 -6
deleted file mode 100644
index b911dbd..0000000
@@ -1,6 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_LWMON5=y
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="LCD4_LWMON5"
-# CONFIG_CMD_SETEXPR is not set
configs/lwmon5_defconfig deleted +0 -4
deleted file mode 100644
index 0a6da68..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_LWMON5=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/lwmon5.h deleted +0 -692

692 lines not on this page · raw message

Signature · 1 line
1.9.1
#4 lore raw

RFC PATCH 3/28 powerpc: remove lwmon5 support

Hi Masahiro,

Quoted 4 lines · Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

I'd like to keep this board - at least for a while. So I'll send a patch to move it to generic-board later.

Thanks,
Stefan

#5 lore raw

RFC PATCH 3/28 powerpc: remove lwmon5 support

Quoted 10 lines · Stefan Roese

Hi Masahiro,

Quoted 4 lines · Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

I'd like to keep this board - at least for a while. So I'll send a patch to move it to generic-board later.

... in two weeks please :) There really has been a long notice about this..

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150813/ac283c30/attachment.sig>
#6 lore raw

RFC PATCH 4/28 powerpc: remove p3p440 support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/ppc4xx/Kconfig   |   4 -
 board/prodrive/p3p440/Kconfig     |  12 --
 board/prodrive/p3p440/MAINTAINERS |   6 -
 board/prodrive/p3p440/Makefile    |   9 --
 board/prodrive/p3p440/config.mk   |  16 --
 board/prodrive/p3p440/init.S      |  38 -----
 board/prodrive/p3p440/p3p440.c    | 177 ----------------------
 board/prodrive/p3p440/p3p440.h    |  24 ---
 configs/p3p440_defconfig          |   4 -
 include/configs/p3p440.h          | 302 --------------------------------------
 10 files changed, 592 deletions(-)
 delete mode 100644 board/prodrive/p3p440/Kconfig
 delete mode 100644 board/prodrive/p3p440/MAINTAINERS
 delete mode 100644 board/prodrive/p3p440/Makefile
 delete mode 100644 board/prodrive/p3p440/config.mk
 delete mode 100644 board/prodrive/p3p440/init.S
 delete mode 100644 board/prodrive/p3p440/p3p440.c
 delete mode 100644 board/prodrive/p3p440/p3p440.h
 delete mode 100644 configs/p3p440_defconfig
 delete mode 100644 include/configs/p3p440.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
index 883463a..b2e3110 100644
@@ -130,9 +130,6 @@ config TARGET_MIP405
 config TARGET_PIP405
 	bool "Support PIP405"
 
-config TARGET_P3P440
-	bool "Support p3p440"
-
 config TARGET_XPEDITE1000
 	bool "Support xpedite1000"
 
@@ -181,7 +178,6 @@ source "board/mosaixtech/icon/Kconfig"
 source "board/mpl/mip405/Kconfig"
 source "board/mpl/pip405/Kconfig"
 source "board/pcs440ep/Kconfig"
-source "board/prodrive/p3p440/Kconfig"
 source "board/sbc405/Kconfig"
 source "board/t3corp/Kconfig"
 source "board/xes/xpedite1000/Kconfig"
board/prodrive/p3p440/Kconfig deleted +0 -12
deleted file mode 100644
index cf53aac..0000000
@@ -1,12 +0,0 @@
-if TARGET_P3P440
-
-config SYS_BOARD
-	default "p3p440"
-
-config SYS_VENDOR
-	default "prodrive"
-
-config SYS_CONFIG_NAME
-	default "p3p440"
-
-endif
board/prodrive/p3p440/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 68fd1a9..0000000
@@ -1,6 +0,0 @@
-P3P440 BOARD
-M:	Stefan Roese <[email protected]>
-S:	Maintained
-F:	board/prodrive/p3p440/
-F:	include/configs/p3p440.h
-F:	configs/p3p440_defconfig
board/prodrive/p3p440/Makefile deleted +0 -9
deleted file mode 100644
index d62f75d..0000000
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= p3p440.o
-extra-y	+= init.o
board/prodrive/p3p440/config.mk deleted +0 -16
deleted file mode 100644
index f18b097..0000000
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
board/prodrive/p3p440/init.S deleted +0 -38
deleted file mode 100644
index 35b1afa..0000000
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr at denx.de.
- *
- * Copyright (C) 2002 Scott McNutt <[email protected]>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ppc_asm.tmpl>
-#include <asm/mmu.h>
-#include <config.h>
-#include <asm/ppc4xx.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-    tlbtab_start
-    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG)
-    tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG)
-    tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_RWX )
-    tlbentry( CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_RWX )
-    tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG )
-    tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG )
-    tlbtab_end
board/prodrive/p3p440/p3p440.c deleted +0 -177

177 lines not on this page · raw message

board/prodrive/p3p440/p3p440.h deleted +0 -24
deleted file mode 100644
index a164f95..0000000
@@ -1,24 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr at denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __P3P440_H__
-#define __P3P440_H__
-
-#define CONFIG_SYS_GPIO_RDY	(0x80000000 >> 11)
-#define CONFIG_SYS_MONARCH_IO	(0x80000000 >> 18)
-#define CONFIG_SYS_EREADY_IO	(0x80000000 >> 20)
-#define CONFIG_SYS_LED_GREEN	(0x80000000 >> 21)
-#define CONFIG_SYS_LED_RED	(0x80000000 >> 22)
-
-#define LED_OFF		1
-#define LED_GREEN	2
-#define LED_RED		3
-#define LED_ORANGE	4
-
-long int fixed_sdram(void);
-
-#endif /* __P3P440_H__ */
configs/p3p440_defconfig deleted +0 -4
deleted file mode 100644
index 84e683b..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_P3P440=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/p3p440.h deleted +0 -302

302 lines not on this page · raw message

Signature · 1 line
1.9.1
#7 lore raw

RFC PATCH 5/28 powerpc: remove pcs440ep support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/ppc4xx/Kconfig |   4 -
 board/pcs440ep/Kconfig          |   9 -
 board/pcs440ep/MAINTAINERS      |   6 -
 board/pcs440ep/Makefile         |   9 -
 board/pcs440ep/config.mk        |  23 --
 board/pcs440ep/flash.c          | 607 --------------------------------
 board/pcs440ep/init.S           |  56 ---
 board/pcs440ep/pcs440ep.c       | 755 ----------------------------------------
 configs/pcs440ep_defconfig      |   4 -
 include/configs/pcs440ep.h      | 457 ------------------------
 10 files changed, 1930 deletions(-)
 delete mode 100644 board/pcs440ep/Kconfig
 delete mode 100644 board/pcs440ep/MAINTAINERS
 delete mode 100644 board/pcs440ep/Makefile
 delete mode 100644 board/pcs440ep/config.mk
 delete mode 100644 board/pcs440ep/flash.c
 delete mode 100644 board/pcs440ep/init.S
 delete mode 100644 board/pcs440ep/pcs440ep.c
 delete mode 100644 configs/pcs440ep_defconfig
 delete mode 100644 include/configs/pcs440ep.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
index b2e3110..e379a6f 100644
@@ -8,9 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_PCS440EP
-	bool "Support pcs440ep"
-
 config TARGET_SBC405
 	bool "Support sbc405"
 
@@ -177,7 +174,6 @@ source "board/gdsys/intip/Kconfig"
 source "board/mosaixtech/icon/Kconfig"
 source "board/mpl/mip405/Kconfig"
 source "board/mpl/pip405/Kconfig"
-source "board/pcs440ep/Kconfig"
 source "board/sbc405/Kconfig"
 source "board/t3corp/Kconfig"
 source "board/xes/xpedite1000/Kconfig"
board/pcs440ep/Kconfig deleted +0 -9
deleted file mode 100644
index 5b280f6..0000000
@@ -1,9 +0,0 @@
-if TARGET_PCS440EP
-
-config SYS_BOARD
-	default "pcs440ep"
-
-config SYS_CONFIG_NAME
-	default "pcs440ep"
-
-endif
board/pcs440ep/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 6eccc85..0000000
@@ -1,6 +0,0 @@
-PCS440EP BOARD
-M:	Stefan Roese <[email protected]>
-S:	Maintained
-F:	board/pcs440ep/
-F:	include/configs/pcs440ep.h
-F:	configs/pcs440ep_defconfig
board/pcs440ep/Makefile deleted +0 -9
deleted file mode 100644
index 4fc24d6..0000000
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= pcs440ep.o flash.o
-extra-y	+= init.o
board/pcs440ep/config.mk deleted +0 -23
deleted file mode 100644
index b90d5d0..0000000
@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-#
-# PCS440EP board
-#
-
-# Check the U-Boot Image with a SHA1 checksum
-ALL-y += u-boot.sha1
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
board/pcs440ep/flash.c deleted +0 -607

607 lines not on this page · raw message

board/pcs440ep/init.S deleted +0 -56

56 lines not on this page · raw message

board/pcs440ep/pcs440ep.c deleted +0 -755

755 lines not on this page · raw message

configs/pcs440ep_defconfig deleted +0 -4
deleted file mode 100644
index b01f63a..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_PCS440EP=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/pcs440ep.h deleted +0 -457

457 lines not on this page · raw message

Signature · 1 line
1.9.1
#8 lore raw

RFC PATCH 6/28 powerpc: remove sbc405 support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/ppc4xx/Kconfig |   4 -
 board/sbc405/Kconfig            |   9 -
 board/sbc405/MAINTAINERS        |   6 -
 board/sbc405/Makefile           |   8 -
 board/sbc405/sbc405.c           |  91 -----
 board/sbc405/strataflash.c      | 774 ----------------------------------------
 configs/sbc405_defconfig        |   4 -
 include/configs/sbc405.h        | 252 -------------
 8 files changed, 1148 deletions(-)
 delete mode 100644 board/sbc405/Kconfig
 delete mode 100644 board/sbc405/MAINTAINERS
 delete mode 100644 board/sbc405/Makefile
 delete mode 100644 board/sbc405/sbc405.c
 delete mode 100644 board/sbc405/strataflash.c
 delete mode 100644 configs/sbc405_defconfig
 delete mode 100644 include/configs/sbc405.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
index e379a6f..16c049e 100644
@@ -8,9 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_SBC405
-	bool "Support sbc405"
-
 config TARGET_T3CORP
 	bool "Support t3corp"
 
@@ -174,7 +171,6 @@ source "board/gdsys/intip/Kconfig"
 source "board/mosaixtech/icon/Kconfig"
 source "board/mpl/mip405/Kconfig"
 source "board/mpl/pip405/Kconfig"
-source "board/sbc405/Kconfig"
 source "board/t3corp/Kconfig"
 source "board/xes/xpedite1000/Kconfig"
 source "board/xilinx/ml507/Kconfig"
board/sbc405/Kconfig deleted +0 -9
deleted file mode 100644
index 4e7e843..0000000
@@ -1,9 +0,0 @@
-if TARGET_SBC405
-
-config SYS_BOARD
-	default "sbc405"
-
-config SYS_CONFIG_NAME
-	default "sbc405"
-
-endif
board/sbc405/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 2abad25..0000000
@@ -1,6 +0,0 @@
-SBC405 BOARD
-#M:	-
-S:	Maintained
-F:	board/sbc405/
-F:	include/configs/sbc405.h
-F:	configs/sbc405_defconfig
board/sbc405/Makefile deleted +0 -8
deleted file mode 100644
index 3f2b0e2..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= sbc405.o strataflash.o
board/sbc405/sbc405.c deleted +0 -91

91 lines not on this page · raw message

board/sbc405/strataflash.c deleted +0 -774

774 lines not on this page · raw message

configs/sbc405_defconfig deleted +0 -4
deleted file mode 100644
index 0bc0ab2..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_SBC405=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/sbc405.h deleted +0 -252

252 lines not on this page · raw message

Signature · 1 line
1.9.1
#9 lore raw

RFC PATCH 7/28 powerpc: remove zeus support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/ppc4xx/Kconfig |   4 -
 board/zeus/Kconfig              |   9 -
 board/zeus/MAINTAINERS          |   6 -
 board/zeus/Makefile             |   8 -
 board/zeus/README               |  73 -------
 board/zeus/update.c             |  89 ---------
 board/zeus/zeus.c               | 410 ----------------------------------------
 configs/zeus_defconfig          |   4 -
 include/configs/zeus.h          | 350 ----------------------------------
 9 files changed, 953 deletions(-)
 delete mode 100644 board/zeus/Kconfig
 delete mode 100644 board/zeus/MAINTAINERS
 delete mode 100644 board/zeus/Makefile
 delete mode 100644 board/zeus/README
 delete mode 100644 board/zeus/update.c
 delete mode 100644 board/zeus/zeus.c
 delete mode 100644 configs/zeus_defconfig
 delete mode 100644 include/configs/zeus.h
arch/powerpc/cpu/ppc4xx/Kconfig +0 -4
index 16c049e..23ecc89 100644
@@ -11,9 +11,6 @@ choice
 config TARGET_T3CORP
 	bool "Support t3corp"
 
-config TARGET_ZEUS
-	bool "Support zeus"
-
 config TARGET_ACADIA
 	bool "Support acadia"
 
@@ -176,6 +173,5 @@ source "board/xes/xpedite1000/Kconfig"
 source "board/xilinx/ml507/Kconfig"
 source "board/xilinx/ppc405-generic/Kconfig"
 source "board/xilinx/ppc440-generic/Kconfig"
-source "board/zeus/Kconfig"
 
 endmenu
board/zeus/Kconfig deleted +0 -9
deleted file mode 100644
index 6779650..0000000
@@ -1,9 +0,0 @@
-if TARGET_ZEUS
-
-config SYS_BOARD
-	default "zeus"
-
-config SYS_CONFIG_NAME
-	default "zeus"
-
-endif
board/zeus/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 3118710..0000000
@@ -1,6 +0,0 @@
-ZEUS BOARD
-M:	Stefan Roese <[email protected]>
-S:	Maintained
-F:	board/zeus/
-F:	include/configs/zeus.h
-F:	configs/zeus_defconfig
board/zeus/Makefile deleted +0 -8
deleted file mode 100644
index aa3658a..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2007
-# Stefan Roese, DENX Software Engineering, sr at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= zeus.o update.o
board/zeus/README deleted +0 -73

73 lines not on this page · raw message

board/zeus/update.c deleted +0 -89

89 lines not on this page · raw message

board/zeus/zeus.c deleted +0 -410

410 lines not on this page · raw message

configs/zeus_defconfig deleted +0 -4
deleted file mode 100644
index da2ff3c..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_4xx=y
-CONFIG_TARGET_ZEUS=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/zeus.h deleted +0 -350

350 lines not on this page · raw message

Signature · 1 line
1.9.1
#10 lore raw

RFC PATCH 8/28 powerpc: remove cmi_mpc5xx support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc5xx/Kconfig |   4 -
 board/cmi/Kconfig               |   9 -
 board/cmi/MAINTAINERS           |   6 -
 board/cmi/Makefile              |   8 -
 board/cmi/README                |  84 -------
 board/cmi/cmi.c                 |  57 -----
 board/cmi/flash.c               | 501 ----------------------------------------
 configs/cmi_mpc5xx_defconfig    |   6 -
 include/configs/cmi_mpc5xx.h    | 240 -------------------
 9 files changed, 915 deletions(-)
 delete mode 100644 board/cmi/Kconfig
 delete mode 100644 board/cmi/MAINTAINERS
 delete mode 100644 board/cmi/Makefile
 delete mode 100644 board/cmi/README
 delete mode 100644 board/cmi/cmi.c
 delete mode 100644 board/cmi/flash.c
 delete mode 100644 configs/cmi_mpc5xx_defconfig
 delete mode 100644 include/configs/cmi_mpc5xx.h
arch/powerpc/cpu/mpc5xx/Kconfig +0 -4
index 5275447..d81bfd2 100644
@@ -8,15 +8,11 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_CMI_MPC5XX
-	bool "Support cmi_mpc5xx"
-
 config TARGET_PATI
 	bool "Support PATI"
 
 endchoice
 
-source "board/cmi/Kconfig"
 source "board/mpl/pati/Kconfig"
 
 endmenu
board/cmi/Kconfig deleted +0 -9
deleted file mode 100644
index 6efe6b1..0000000
@@ -1,9 +0,0 @@
-if TARGET_CMI_MPC5XX
-
-config SYS_BOARD
-	default "cmi"
-
-config SYS_CONFIG_NAME
-	default "cmi_mpc5xx"
-
-endif
board/cmi/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 60701bf..0000000
@@ -1,6 +0,0 @@
-CMI BOARD
-#M:	-
-S:	Maintained
-F:	board/cmi/
-F:	include/configs/cmi_mpc5xx.h
-F:	configs/cmi_mpc5xx_defconfig
board/cmi/Makefile deleted +0 -8
deleted file mode 100644
index cd3bb0d..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= flash.o cmi.o
board/cmi/README deleted +0 -84

84 lines not on this page · raw message

board/cmi/cmi.c deleted +0 -57

57 lines not on this page · raw message

board/cmi/flash.c deleted +0 -501

501 lines not on this page · raw message

configs/cmi_mpc5xx_defconfig deleted +0 -6
deleted file mode 100644
index abebfab..0000000
@@ -1,6 +0,0 @@
-CONFIG_PPC=y
-CONFIG_5xx=y
-CONFIG_TARGET_CMI_MPC5XX=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
include/configs/cmi_mpc5xx.h deleted +0 -240

240 lines not on this page · raw message

Signature · 1 line
1.9.1
#11 lore raw

RFC PATCH 9/28 powerpc: remove canmb board support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc5xxx/Kconfig |   4 -
 board/canmb/Kconfig              |   9 --
 board/canmb/MAINTAINERS          |   6 --
 board/canmb/Makefile             |   9 --
 board/canmb/canmb.c              | 183 ---------------------------------
 board/canmb/mt48lc16m32s2-75.h   |  14 ---
 configs/canmb_defconfig          |   4 -
 include/configs/canmb.h          | 211 ---------------------------------------
 8 files changed, 440 deletions(-)
 delete mode 100644 board/canmb/Kconfig
 delete mode 100644 board/canmb/MAINTAINERS
 delete mode 100644 board/canmb/Makefile
 delete mode 100644 board/canmb/canmb.c
 delete mode 100644 board/canmb/mt48lc16m32s2-75.h
 delete mode 100644 configs/canmb_defconfig
 delete mode 100644 include/configs/canmb.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
index 5d49228..526e891 100644
@@ -15,9 +15,6 @@ config TARGET_A3M071
 config TARGET_A4M072
 	bool "Support a4m072"
 
-config TARGET_CANMB
-	bool "Support canmb"
-
 config TARGET_CM5200
 	bool "Support cm5200"
 
@@ -73,7 +70,6 @@ endchoice
 
 source "board/a3m071/Kconfig"
 source "board/a4m072/Kconfig"
-source "board/canmb/Kconfig"
 source "board/cm5200/Kconfig"
 source "board/ifm/o2dnt2/Kconfig"
 source "board/inka4x0/Kconfig"
board/canmb/Kconfig deleted +0 -9
deleted file mode 100644
index b5cf205..0000000
@@ -1,9 +0,0 @@
-if TARGET_CANMB
-
-config SYS_BOARD
-	default "canmb"
-
-config SYS_CONFIG_NAME
-	default "canmb"
-
-endif
board/canmb/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 71750ea..0000000
@@ -1,6 +0,0 @@
-CANMB BOARD
-#M:	-
-S:	Maintained
-F:	board/canmb/
-F:	include/configs/canmb.h
-F:	configs/canmb_defconfig
board/canmb/Makefile deleted +0 -9
deleted file mode 100644
index 4286a91..0000000
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2005-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= canmb.o
-
board/canmb/canmb.c deleted +0 -183

183 lines not on this page · raw message

board/canmb/mt48lc16m32s2-75.h deleted +0 -14
deleted file mode 100644
index 0133eaa..0000000
@@ -1,14 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
configs/canmb_defconfig deleted +0 -4
deleted file mode 100644
index b1ec147..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_CANMB=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/canmb.h deleted +0 -211

211 lines not on this page · raw message

Signature · 1 line
1.9.1
#12 lore raw

RFC PATCH 10/28 powerpc: remove inka4x0 support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc5xxx/Kconfig |   4 -
 board/inka4x0/Kconfig            |   9 -
 board/inka4x0/MAINTAINERS        |   6 -
 board/inka4x0/Makefile           |   8 -
 board/inka4x0/inka4x0.c          | 250 ---------------------
 board/inka4x0/inkadiag.c         | 464 ---------------------------------------
 board/inka4x0/k4h511638c.h       |  16 --
 board/inka4x0/mt46v16m16-75.h    |  16 --
 board/inka4x0/mt46v32m16-75.h    |  16 --
 board/inka4x0/mt48lc16m16a2-75.h |  14 --
 configs/inka4x0_defconfig        |   4 -
 include/configs/inka4x0.h        | 413 ----------------------------------
 12 files changed, 1220 deletions(-)
 delete mode 100644 board/inka4x0/Kconfig
 delete mode 100644 board/inka4x0/MAINTAINERS
 delete mode 100644 board/inka4x0/Makefile
 delete mode 100644 board/inka4x0/inka4x0.c
 delete mode 100644 board/inka4x0/inkadiag.c
 delete mode 100644 board/inka4x0/k4h511638c.h
 delete mode 100644 board/inka4x0/mt46v16m16-75.h
 delete mode 100644 board/inka4x0/mt46v32m16-75.h
 delete mode 100644 board/inka4x0/mt48lc16m16a2-75.h
 delete mode 100644 configs/inka4x0_defconfig
 delete mode 100644 include/configs/inka4x0.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
index 526e891..23117ac 100644
@@ -18,9 +18,6 @@ config TARGET_A4M072
 config TARGET_CM5200
 	bool "Support cm5200"
 
-config TARGET_INKA4X0
-	bool "Support inka4x0"
-
 config TARGET_IPEK01
 	bool "Support ipek01"
 
@@ -72,7 +69,6 @@ source "board/a3m071/Kconfig"
 source "board/a4m072/Kconfig"
 source "board/cm5200/Kconfig"
 source "board/ifm/o2dnt2/Kconfig"
-source "board/inka4x0/Kconfig"
 source "board/intercontrol/digsy_mtc/Kconfig"
 source "board/ipek01/Kconfig"
 source "board/jupiter/Kconfig"
board/inka4x0/Kconfig deleted +0 -9
deleted file mode 100644
index 94a41f0..0000000
@@ -1,9 +0,0 @@
-if TARGET_INKA4X0
-
-config SYS_BOARD
-	default "inka4x0"
-
-config SYS_CONFIG_NAME
-	default "inka4x0"
-
-endif
board/inka4x0/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 246b2d4..0000000
@@ -1,6 +0,0 @@
-INKA4X0 BOARD
-M:	Detlev Zundel <[email protected]>
-S:	Maintained
-F:	board/inka4x0/
-F:	include/configs/inka4x0.h
-F:	configs/inka4x0_defconfig
board/inka4x0/Makefile deleted +0 -8
deleted file mode 100644
index c9a3540..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2009
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= inka4x0.o inkadiag.o
board/inka4x0/inka4x0.c deleted +0 -250

250 lines not on this page · raw message

board/inka4x0/inkadiag.c deleted +0 -464

464 lines not on this page · raw message

board/inka4x0/k4h511638c.h deleted +0 -16
deleted file mode 100644
index 054ddaf..0000000
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2007 Semihalf
- * Written by Marian Balakowicz <[email protected]>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x714F0F00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x46770000
-#define SDRAM_TAPDELAY	0x10000000
board/inka4x0/mt46v16m16-75.h deleted +0 -16
deleted file mode 100644
index 23fc6f0..0000000
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x714F0F00
-#define SDRAM_CONFIG1	0x73722930
-#define SDRAM_CONFIG2	0x47770000
-#define SDRAM_TAPDELAY	0x10000000
board/inka4x0/mt46v32m16-75.h deleted +0 -16
deleted file mode 100644
index f16f450..0000000
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2007 Semihalf
- * Written by Marian Balakowicz <[email protected]>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x714F0F00
-#define SDRAM_CONFIG1	0x73711930
-#define SDRAM_CONFIG2	0x46770000
-#define SDRAM_TAPDELAY	0x10000000
board/inka4x0/mt48lc16m16a2-75.h deleted +0 -14
deleted file mode 100644
index 0133eaa..0000000
@@ -1,14 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
configs/inka4x0_defconfig deleted +0 -4
deleted file mode 100644
index 4c1016a..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_INKA4X0=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/inka4x0.h deleted +0 -413

413 lines not on this page · raw message

Signature · 1 line
1.9.1
#13 lore raw

RFC PATCH 11/28 powerpc: remove ipek01 support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc5xxx/Kconfig |   4 -
 board/ipek01/Kconfig             |   9 -
 board/ipek01/MAINTAINERS         |   6 -
 board/ipek01/Makefile            |   8 -
 board/ipek01/ipek01.c            | 268 ----------------------------
 configs/ipek01_defconfig         |   4 -
 include/configs/ipek01.h         | 374 ---------------------------------------
 7 files changed, 673 deletions(-)
 delete mode 100644 board/ipek01/Kconfig
 delete mode 100644 board/ipek01/MAINTAINERS
 delete mode 100644 board/ipek01/Makefile
 delete mode 100644 board/ipek01/ipek01.c
 delete mode 100644 configs/ipek01_defconfig
 delete mode 100644 include/configs/ipek01.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
index 23117ac..bbfc54f 100644
@@ -18,9 +18,6 @@ config TARGET_A4M072
 config TARGET_CM5200
 	bool "Support cm5200"
 
-config TARGET_IPEK01
-	bool "Support ipek01"
-
 config TARGET_JUPITER
 	bool "Support jupiter"
 
@@ -70,7 +67,6 @@ source "board/a4m072/Kconfig"
 source "board/cm5200/Kconfig"
 source "board/ifm/o2dnt2/Kconfig"
 source "board/intercontrol/digsy_mtc/Kconfig"
-source "board/ipek01/Kconfig"
 source "board/jupiter/Kconfig"
 source "board/motionpro/Kconfig"
 source "board/munices/Kconfig"
board/ipek01/Kconfig deleted +0 -9
deleted file mode 100644
index 34e094d..0000000
@@ -1,9 +0,0 @@
-if TARGET_IPEK01
-
-config SYS_BOARD
-	default "ipek01"
-
-config SYS_CONFIG_NAME
-	default "ipek01"
-
-endif
board/ipek01/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 060f8a5..0000000
@@ -1,6 +0,0 @@
-IPEK01 BOARD
-M:	Wolfgang Grandegger <[email protected]>
-S:	Maintained
-F:	board/ipek01/
-F:	include/configs/ipek01.h
-F:	configs/ipek01_defconfig
board/ipek01/Makefile deleted +0 -8
deleted file mode 100644
index a786ab2..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= ipek01.o
board/ipek01/ipek01.c deleted +0 -268

268 lines not on this page · raw message

configs/ipek01_defconfig deleted +0 -4
deleted file mode 100644
index c8ddbc5..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_IPEK01=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/ipek01.h deleted +0 -374

374 lines not on this page · raw message

Signature · 1 line
1.9.1
#14 lore raw

RFC PATCH 11/28 powerpc: remove ipek01 support

Hi,

Quoted 2 lines · On Thu, 13 Aug 2015 19:15:29 +0900 Masahiro Yamada…

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

I'll submit conversion patch for this board today.

Thanks,

Anatolij

#15 lore raw

RFC PATCH 12/28 powerpc: remove jupiter support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc5xxx/Kconfig |   4 -
 board/jupiter/Kconfig            |   9 --
 board/jupiter/MAINTAINERS        |   6 -
 board/jupiter/Makefile           |   8 --
 board/jupiter/jupiter.c          | 292 ---------------------------------------
 configs/jupiter_defconfig        |   4 -
 include/configs/jupiter.h        | 282 -------------------------------------
 7 files changed, 605 deletions(-)
 delete mode 100644 board/jupiter/Kconfig
 delete mode 100644 board/jupiter/MAINTAINERS
 delete mode 100644 board/jupiter/Makefile
 delete mode 100644 board/jupiter/jupiter.c
 delete mode 100644 configs/jupiter_defconfig
 delete mode 100644 include/configs/jupiter.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
index bbfc54f..c7b6892 100644
@@ -18,9 +18,6 @@ config TARGET_A4M072
 config TARGET_CM5200
 	bool "Support cm5200"
 
-config TARGET_JUPITER
-	bool "Support jupiter"
-
 config TARGET_MOTIONPRO
 	bool "Support motionpro"
 
@@ -67,7 +64,6 @@ source "board/a4m072/Kconfig"
 source "board/cm5200/Kconfig"
 source "board/ifm/o2dnt2/Kconfig"
 source "board/intercontrol/digsy_mtc/Kconfig"
-source "board/jupiter/Kconfig"
 source "board/motionpro/Kconfig"
 source "board/munices/Kconfig"
 source "board/phytec/pcm030/Kconfig"
board/jupiter/Kconfig deleted +0 -9
deleted file mode 100644
index d71acbb..0000000
@@ -1,9 +0,0 @@
-if TARGET_JUPITER
-
-config SYS_BOARD
-	default "jupiter"
-
-config SYS_CONFIG_NAME
-	default "jupiter"
-
-endif
board/jupiter/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 5a79a61..0000000
@@ -1,6 +0,0 @@
-JUPITER BOARD
-M:	Heiko Schocher <[email protected]>
-S:	Maintained
-F:	board/jupiter/
-F:	include/configs/jupiter.h
-F:	configs/jupiter_defconfig
board/jupiter/Makefile deleted +0 -8
deleted file mode 100644
index 4d3ef9e..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= jupiter.o
board/jupiter/jupiter.c deleted +0 -292

292 lines not on this page · raw message

configs/jupiter_defconfig deleted +0 -4
deleted file mode 100644
index a3c259f..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_JUPITER=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/jupiter.h deleted +0 -282

282 lines not on this page · raw message

Signature · 1 line
1.9.1
#16 lore raw

RFC PATCH 13/28 powerpc: remove motionpro support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc5xxx/Kconfig |   4 -
 board/motionpro/Kconfig          |   9 -
 board/motionpro/MAINTAINERS      |   6 -
 board/motionpro/Makefile         |   8 -
 board/motionpro/motionpro.c      | 220 ----------------------
 configs/motionpro_defconfig      |   7 -
 include/configs/motionpro.h      | 390 ---------------------------------------
 7 files changed, 644 deletions(-)
 delete mode 100644 board/motionpro/Kconfig
 delete mode 100644 board/motionpro/MAINTAINERS
 delete mode 100644 board/motionpro/Makefile
 delete mode 100644 board/motionpro/motionpro.c
 delete mode 100644 configs/motionpro_defconfig
 delete mode 100644 include/configs/motionpro.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
index c7b6892..70018aa 100644
@@ -18,9 +18,6 @@ config TARGET_A4M072
 config TARGET_CM5200
 	bool "Support cm5200"
 
-config TARGET_MOTIONPRO
-	bool "Support motionpro"
-
 config TARGET_MUNICES
 	bool "Support munices"
 
@@ -64,7 +61,6 @@ source "board/a4m072/Kconfig"
 source "board/cm5200/Kconfig"
 source "board/ifm/o2dnt2/Kconfig"
 source "board/intercontrol/digsy_mtc/Kconfig"
-source "board/motionpro/Kconfig"
 source "board/munices/Kconfig"
 source "board/phytec/pcm030/Kconfig"
 source "board/tqc/tqm5200/Kconfig"
board/motionpro/Kconfig deleted +0 -9
deleted file mode 100644
index f624f6c..0000000
@@ -1,9 +0,0 @@
-if TARGET_MOTIONPRO
-
-config SYS_BOARD
-	default "motionpro"
-
-config SYS_CONFIG_NAME
-	default "motionpro"
-
-endif
board/motionpro/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 2f8b5cb..0000000
@@ -1,6 +0,0 @@
-MOTIONPRO BOARD
-#M:	-
-S:	Maintained
-F:	board/motionpro/
-F:	include/configs/motionpro.h
-F:	configs/motionpro_defconfig
board/motionpro/Makefile deleted +0 -8
deleted file mode 100644
index 898a384..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2007
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= motionpro.o
board/motionpro/motionpro.c deleted +0 -220

220 lines not on this page · raw message

configs/motionpro_defconfig deleted +0 -7
deleted file mode 100644
index 4d3f909..0000000
@@ -1,7 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MOTIONPRO=y
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
-CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
-# CONFIG_CMD_SETEXPR is not set
include/configs/motionpro.h deleted +0 -390

390 lines not on this page · raw message

Signature · 1 line
1.9.1
#17 lore raw

RFC PATCH 14/28 powerpc: remove munices support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc5xxx/Kconfig |   4 -
 board/munices/Kconfig            |   9 --
 board/munices/MAINTAINERS        |   6 --
 board/munices/Makefile           |   8 --
 board/munices/mt48lc16m16a2-75.h |  14 ---
 board/munices/munices.c          | 155 ------------------------------
 configs/munices_defconfig        |   4 -
 include/configs/munices.h        | 197 ---------------------------------------
 8 files changed, 397 deletions(-)
 delete mode 100644 board/munices/Kconfig
 delete mode 100644 board/munices/MAINTAINERS
 delete mode 100644 board/munices/Makefile
 delete mode 100644 board/munices/mt48lc16m16a2-75.h
 delete mode 100644 board/munices/munices.c
 delete mode 100644 configs/munices_defconfig
 delete mode 100644 include/configs/munices.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
index 70018aa..b1d7ae8 100644
@@ -18,9 +18,6 @@ config TARGET_A4M072
 config TARGET_CM5200
 	bool "Support cm5200"
 
-config TARGET_MUNICES
-	bool "Support munices"
-
 config TARGET_V38B
 	bool "Support v38b"
 
@@ -61,7 +58,6 @@ source "board/a4m072/Kconfig"
 source "board/cm5200/Kconfig"
 source "board/ifm/o2dnt2/Kconfig"
 source "board/intercontrol/digsy_mtc/Kconfig"
-source "board/munices/Kconfig"
 source "board/phytec/pcm030/Kconfig"
 source "board/tqc/tqm5200/Kconfig"
 source "board/v38b/Kconfig"
board/munices/Kconfig deleted +0 -9
deleted file mode 100644
index 019aaae..0000000
@@ -1,9 +0,0 @@
-if TARGET_MUNICES
-
-config SYS_BOARD
-	default "munices"
-
-config SYS_CONFIG_NAME
-	default "munices"
-
-endif
board/munices/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 50d3e7e..0000000
@@ -1,6 +0,0 @@
-MUNICES BOARD
-#M:	-
-S:	Maintained
-F:	board/munices/
-F:	include/configs/munices.h
-F:	configs/munices_defconfig
board/munices/Makefile deleted +0 -8
deleted file mode 100644
index d16e2a1..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= munices.o
board/munices/mt48lc16m16a2-75.h deleted +0 -14
deleted file mode 100644
index 0133eaa..0000000
@@ -1,14 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-#define SDRAM_CONFIG2	0x8AD70000
board/munices/munices.c deleted +0 -155

155 lines not on this page · raw message

configs/munices_defconfig deleted +0 -4
deleted file mode 100644
index 1c0309a..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_MUNICES=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/munices.h deleted +0 -197

197 lines not on this page · raw message

Signature · 1 line
1.9.1
#18 lore raw

RFC PATCH 15/28 powerpc: remove pcm030 support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc5xxx/Kconfig    |   4 -
 board/phytec/pcm030/Kconfig         |  12 -
 board/phytec/pcm030/MAINTAINERS     |   7 -
 board/phytec/pcm030/Makefile        |   8 -
 board/phytec/pcm030/README          |  42 ----
 board/phytec/pcm030/mt46v32m16-75.h |  21 --
 board/phytec/pcm030/pcm030.c        | 205 -----------------
 configs/pcm030_LOWBOOT_defconfig    |   5 -
 configs/pcm030_defconfig            |   4 -
 include/configs/pcm030.h            | 430 ------------------------------------
 10 files changed, 738 deletions(-)
 delete mode 100644 board/phytec/pcm030/Kconfig
 delete mode 100644 board/phytec/pcm030/MAINTAINERS
 delete mode 100644 board/phytec/pcm030/Makefile
 delete mode 100644 board/phytec/pcm030/README
 delete mode 100644 board/phytec/pcm030/mt46v32m16-75.h
 delete mode 100644 board/phytec/pcm030/pcm030.c
 delete mode 100644 configs/pcm030_LOWBOOT_defconfig
 delete mode 100644 configs/pcm030_defconfig
 delete mode 100644 include/configs/pcm030.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
index b1d7ae8..dc86ac3 100644
@@ -42,9 +42,6 @@ config TARGET_O3DNT
 config TARGET_DIGSY_MTC
 	bool "Support digsy_mtc"
 
-config TARGET_PCM030
-	bool "Support pcm030"
-
 config TARGET_CHARON
 	bool "Support charon"
 
@@ -58,7 +55,6 @@ source "board/a4m072/Kconfig"
 source "board/cm5200/Kconfig"
 source "board/ifm/o2dnt2/Kconfig"
 source "board/intercontrol/digsy_mtc/Kconfig"
-source "board/phytec/pcm030/Kconfig"
 source "board/tqc/tqm5200/Kconfig"
 source "board/v38b/Kconfig"
 
board/phytec/pcm030/Kconfig deleted +0 -12
deleted file mode 100644
index 3a3eab8..0000000
@@ -1,12 +0,0 @@
-if TARGET_PCM030
-
-config SYS_BOARD
-	default "pcm030"
-
-config SYS_VENDOR
-	default "phytec"
-
-config SYS_CONFIG_NAME
-	default "pcm030"
-
-endif
board/phytec/pcm030/MAINTAINERS deleted +0 -7
deleted file mode 100644
index 4e2ab0d..0000000
@@ -1,7 +0,0 @@
-PCM030 BOARD
-M:	Jon Smirl <[email protected]>
-S:	Maintained
-F:	board/phytec/pcm030/
-F:	include/configs/pcm030.h
-F:	configs/pcm030_defconfig
-F:	configs/pcm030_LOWBOOT_defconfig
board/phytec/pcm030/Makefile deleted +0 -8
deleted file mode 100644
index 2bb49dc..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2007
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= pcm030.o
board/phytec/pcm030/README deleted +0 -42

42 lines not on this page · raw message

board/phytec/pcm030/mt46v32m16-75.h deleted +0 -21
deleted file mode 100644
index 47fc7c0..0000000
@@ -1,21 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
- *
- * Eric Schumann, Phytec Messtechnik
- * adapted for mt46v32m16-75 DDR-RAM
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	1		/* is DDR */
-
-/* Settings for XLB = 132 MHz */
-
-#define SDRAM_MODE	0x018D0000
-#define SDRAM_EMODE	0x40090000
-#define SDRAM_CONTROL	0x71500F00
-#define SDRAM_CONFIG1	0x73711930
-#define SDRAM_CONFIG2	0x47770000
-
-#define SDRAM_TAPDELAY	0x10000000 /* reserved Bit in MPC5200 B3-Step */
board/phytec/pcm030/pcm030.c deleted +0 -205

205 lines not on this page · raw message

configs/pcm030_LOWBOOT_defconfig deleted +0 -5
deleted file mode 100644
index 42389bb..0000000
@@ -1,5 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_PCM030=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000"
-# CONFIG_CMD_SETEXPR is not set
configs/pcm030_defconfig deleted +0 -4
deleted file mode 100644
index df9309e..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_PCM030=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/pcm030.h deleted +0 -430

430 lines not on this page · raw message

Signature · 1 line
1.9.1
#19 lore raw

RFC PATCH 16/28 powerpc: remove v38b support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc5xxx/Kconfig |   4 -
 board/v38b/Kconfig               |   9 --
 board/v38b/MAINTAINERS           |   6 -
 board/v38b/Makefile              |   8 -
 board/v38b/ethaddr.c             | 197 -----------------------
 board/v38b/v38b.c                | 260 ------------------------------
 configs/v38b_defconfig           |   4 -
 include/configs/v38b.h           | 333 ---------------------------------------
 8 files changed, 821 deletions(-)
 delete mode 100644 board/v38b/Kconfig
 delete mode 100644 board/v38b/MAINTAINERS
 delete mode 100644 board/v38b/Makefile
 delete mode 100644 board/v38b/ethaddr.c
 delete mode 100644 board/v38b/v38b.c
 delete mode 100644 configs/v38b_defconfig
 delete mode 100644 include/configs/v38b.h
arch/powerpc/cpu/mpc5xxx/Kconfig +0 -4
index dc86ac3..7fa948f 100644
@@ -18,9 +18,6 @@ config TARGET_A4M072
 config TARGET_CM5200
 	bool "Support cm5200"
 
-config TARGET_V38B
-	bool "Support v38b"
-
 config TARGET_O2D
 	bool "Support O2D"
 
@@ -56,6 +53,5 @@ source "board/cm5200/Kconfig"
 source "board/ifm/o2dnt2/Kconfig"
 source "board/intercontrol/digsy_mtc/Kconfig"
 source "board/tqc/tqm5200/Kconfig"
-source "board/v38b/Kconfig"
 
 endmenu
board/v38b/Kconfig deleted +0 -9
deleted file mode 100644
index 653bfc1..0000000
@@ -1,9 +0,0 @@
-if TARGET_V38B
-
-config SYS_BOARD
-	default "v38b"
-
-config SYS_CONFIG_NAME
-	default "v38b"
-
-endif
board/v38b/MAINTAINERS deleted +0 -6
deleted file mode 100644
index d1a6ae6..0000000
@@ -1,6 +0,0 @@
-V38B BOARD
-#M:	-
-S:	Maintained
-F:	board/v38b/
-F:	include/configs/v38b.h
-F:	configs/v38b_defconfig
board/v38b/Makefile deleted +0 -8
deleted file mode 100644
index a20a5ef..0000000
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= v38b.o ethaddr.o
board/v38b/ethaddr.c deleted +0 -197

197 lines not on this page · raw message

board/v38b/v38b.c deleted +0 -260

260 lines not on this page · raw message

configs/v38b_defconfig deleted +0 -4
deleted file mode 100644
index cc3d802..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_V38B=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/v38b.h deleted +0 -333

333 lines not on this page · raw message

Signature · 1 line
1.9.1
#20 lore raw

RFC PATCH 17/28 powerpc: remove socrates support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig |   4 -
 board/socrates/Kconfig           |   9 -
 board/socrates/MAINTAINERS       |   6 -
 board/socrates/Makefile          |  15 --
 board/socrates/ddr.c             |  56 -----
 board/socrates/law.c             |  44 ----
 board/socrates/nand.c            | 163 --------------
 board/socrates/sdram.c           |  96 ---------
 board/socrates/socrates.c        | 434 -------------------------------------
 board/socrates/tlb.c             | 105 ---------
 board/socrates/upm_table.h       |  59 ------
 configs/socrates_defconfig       |   5 -
 include/configs/socrates.h       | 446 ---------------------------------------
 13 files changed, 1442 deletions(-)
 delete mode 100644 board/socrates/Kconfig
 delete mode 100644 board/socrates/MAINTAINERS
 delete mode 100644 board/socrates/Makefile
 delete mode 100644 board/socrates/ddr.c
 delete mode 100644 board/socrates/law.c
 delete mode 100644 board/socrates/nand.c
 delete mode 100644 board/socrates/sdram.c
 delete mode 100644 board/socrates/socrates.c
 delete mode 100644 board/socrates/tlb.c
 delete mode 100644 board/socrates/upm_table.h
 delete mode 100644 configs/socrates_defconfig
 delete mode 100644 include/configs/socrates.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
index 3e8d0b1..127bd6f 100644
@@ -11,9 +11,6 @@ choice
 config TARGET_SBC8548
 	bool "Support sbc8548"
 
-config TARGET_SOCRATES
-	bool "Support socrates"
-
 config TARGET_B4860QDS
 	bool "Support B4860QDS"
 	select SUPPORT_SPL
@@ -190,7 +187,6 @@ source "board/freescale/t4rdb/Kconfig"
 source "board/gdsys/p1022/Kconfig"
 source "board/keymile/kmp204x/Kconfig"
 source "board/sbc8548/Kconfig"
-source "board/socrates/Kconfig"
 source "board/stx/stxgp3/Kconfig"
 source "board/stx/stxssa/Kconfig"
 source "board/xes/xpedite520x/Kconfig"
board/socrates/Kconfig deleted +0 -9
deleted file mode 100644
index ca945c2..0000000
@@ -1,9 +0,0 @@
-if TARGET_SOCRATES
-
-config SYS_BOARD
-	default "socrates"
-
-config SYS_CONFIG_NAME
-	default "socrates"
-
-endif
board/socrates/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 293b8e6..0000000
@@ -1,6 +0,0 @@
-SOCRATES BOARD
-#M:	-
-S:	Maintained
-F:	board/socrates/
-F:	include/configs/socrates.h
-F:	configs/socrates_defconfig
board/socrates/Makefile deleted +0 -15
deleted file mode 100644
index 79bda71..0000000
@@ -1,15 +0,0 @@
-#
-# (C) Copyright 2008
-# Sergei Poselenov,  Emcraft Systems, sposelenov at emcraft.com.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= socrates.o
-obj-y	+= law.o
-obj-y	+= tlb.o
-obj-y	+= nand.o
-obj-y	+= sdram.o
-obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
board/socrates/ddr.c deleted +0 -56

56 lines not on this page · raw message

board/socrates/law.c deleted +0 -44

44 lines not on this page · raw message

board/socrates/nand.c deleted +0 -163

163 lines not on this page · raw message

board/socrates/sdram.c deleted +0 -96

96 lines not on this page · raw message

board/socrates/socrates.c deleted +0 -434

434 lines not on this page · raw message

board/socrates/tlb.c deleted +0 -105

105 lines not on this page · raw message

board/socrates/upm_table.h deleted +0 -59

59 lines not on this page · raw message

configs/socrates_defconfig deleted +0 -5
deleted file mode 100644
index 37af82e..0000000
@@ -1,5 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_SOCRATES=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
include/configs/socrates.h deleted +0 -446

446 lines not on this page · raw message

Signature · 1 line
1.9.1
#21 lore raw

RFC PATCH 17/28 powerpc: remove socrates support

Hi,

Quoted 2 lines · On Thu, 13 Aug 2015 19:15:35 +0900 Masahiro Yamada…

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

I'll submit conversion patch for this board and for some other mpc5xxx boards today.

Thanks,

Anatolij

#22 lore raw

RFC PATCH 18/28 powerpc: remove stxgp3, stxssa support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig |   8 -
 board/stx/stxgp3/Kconfig         |  12 -
 board/stx/stxgp3/MAINTAINERS     |   6 -
 board/stx/stxgp3/Makefile        |  12 -
 board/stx/stxgp3/ddr.c           |  46 ----
 board/stx/stxgp3/flash.c         | 499 ---------------------------------------
 board/stx/stxgp3/law.c           |  42 ----
 board/stx/stxgp3/stxgp3.c        | 331 --------------------------
 board/stx/stxgp3/tlb.c           | 114 ---------
 board/stx/stxssa/Kconfig         |  12 -
 board/stx/stxssa/MAINTAINERS     |   7 -
 board/stx/stxssa/Makefile        |  11 -
 board/stx/stxssa/ddr.c           |  47 ----
 board/stx/stxssa/law.c           |  44 ----
 board/stx/stxssa/stxssa.c        | 370 -----------------------------
 board/stx/stxssa/tlb.c           |  90 -------
 configs/stxgp3_defconfig         |   4 -
 configs/stxssa_4M_defconfig      |   5 -
 configs/stxssa_defconfig         |   4 -
 include/configs/stxgp3.h         | 355 ----------------------------
 include/configs/stxssa.h         | 441 ----------------------------------
 21 files changed, 2460 deletions(-)
 delete mode 100644 board/stx/stxgp3/Kconfig
 delete mode 100644 board/stx/stxgp3/MAINTAINERS
 delete mode 100644 board/stx/stxgp3/Makefile
 delete mode 100644 board/stx/stxgp3/ddr.c
 delete mode 100644 board/stx/stxgp3/flash.c
 delete mode 100644 board/stx/stxgp3/law.c
 delete mode 100644 board/stx/stxgp3/stxgp3.c
 delete mode 100644 board/stx/stxgp3/tlb.c
 delete mode 100644 board/stx/stxssa/Kconfig
 delete mode 100644 board/stx/stxssa/MAINTAINERS
 delete mode 100644 board/stx/stxssa/Makefile
 delete mode 100644 board/stx/stxssa/ddr.c
 delete mode 100644 board/stx/stxssa/law.c
 delete mode 100644 board/stx/stxssa/stxssa.c
 delete mode 100644 board/stx/stxssa/tlb.c
 delete mode 100644 configs/stxgp3_defconfig
 delete mode 100644 configs/stxssa_4M_defconfig
 delete mode 100644 configs/stxssa_defconfig
 delete mode 100644 include/configs/stxgp3.h
 delete mode 100644 include/configs/stxssa.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -8
index 127bd6f..8907b03 100644
@@ -134,12 +134,6 @@ config TARGET_CONTROLCENTERD
 config TARGET_KMP204X
 	bool "Support kmp204x"
 
-config TARGET_STXGP3
-	bool "Support stxgp3"
-
-config TARGET_STXSSA
-	bool "Support stxssa"
-
 config TARGET_XPEDITE520X
 	bool "Support xpedite520x"
 
@@ -187,8 +181,6 @@ source "board/freescale/t4rdb/Kconfig"
 source "board/gdsys/p1022/Kconfig"
 source "board/keymile/kmp204x/Kconfig"
 source "board/sbc8548/Kconfig"
-source "board/stx/stxgp3/Kconfig"
-source "board/stx/stxssa/Kconfig"
 source "board/xes/xpedite520x/Kconfig"
 source "board/xes/xpedite537x/Kconfig"
 source "board/xes/xpedite550x/Kconfig"
board/stx/stxgp3/Kconfig deleted +0 -12
deleted file mode 100644
index 910b31b..0000000
@@ -1,12 +0,0 @@
-if TARGET_STXGP3
-
-config SYS_BOARD
-	default "stxgp3"
-
-config SYS_VENDOR
-	default "stx"
-
-config SYS_CONFIG_NAME
-	default "stxgp3"
-
-endif
board/stx/stxgp3/MAINTAINERS deleted +0 -6
deleted file mode 100644
index bd5743c..0000000
@@ -1,6 +0,0 @@
-STXGP3 BOARD
-#M:	Dan Malek <[email protected]>
-S:	Orphan (since 2014-06)
-F:	board/stx/stxgp3/
-F:	include/configs/stxgp3.h
-F:	configs/stxgp3_defconfig
board/stx/stxgp3/Makefile deleted +0 -12
deleted file mode 100644
index 78e2d6c..0000000
@@ -1,12 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= stxgp3.o
-obj-y	+= law.o
-obj-y	+= tlb.o
-obj-y	+= flash.o
-obj-$(CONFIG_SYS_FSL_DDR1) += ddr.o
board/stx/stxgp3/ddr.c deleted +0 -46

46 lines not on this page · raw message

board/stx/stxgp3/flash.c deleted +0 -499

499 lines not on this page · raw message

board/stx/stxgp3/law.c deleted +0 -42

42 lines not on this page · raw message

board/stx/stxgp3/stxgp3.c deleted +0 -331

331 lines not on this page · raw message

board/stx/stxgp3/tlb.c deleted +0 -114

114 lines not on this page · raw message

board/stx/stxssa/Kconfig deleted +0 -12
deleted file mode 100644
index bd47b04..0000000
@@ -1,12 +0,0 @@
-if TARGET_STXSSA
-
-config SYS_BOARD
-	default "stxssa"
-
-config SYS_VENDOR
-	default "stx"
-
-config SYS_CONFIG_NAME
-	default "stxssa"
-
-endif
board/stx/stxssa/MAINTAINERS deleted +0 -7
deleted file mode 100644
index b7cc89b..0000000
@@ -1,7 +0,0 @@
-STXSSA BOARD
-#M:	Dan Malek <[email protected]>
-S:	Orphan (since 2014-06)
-F:	board/stx/stxssa/
-F:	include/configs/stxssa.h
-F:	configs/stxssa_defconfig
-F:	configs/stxssa_4M_defconfig
board/stx/stxssa/Makefile deleted +0 -11
deleted file mode 100644
index b1d4b0a..0000000
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= stxssa.o
-obj-y	+= law.o
-obj-y	+= tlb.o
-obj-$(CONFIG_SYS_FSL_DDR1) += ddr.o
board/stx/stxssa/ddr.c deleted +0 -47

47 lines not on this page · raw message

board/stx/stxssa/law.c deleted +0 -44

44 lines not on this page · raw message

board/stx/stxssa/stxssa.c deleted +0 -370

370 lines not on this page · raw message

board/stx/stxssa/tlb.c deleted +0 -90

90 lines not on this page · raw message

configs/stxgp3_defconfig deleted +0 -4
deleted file mode 100644
index 86afe88..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_STXGP3=y
-# CONFIG_CMD_SETEXPR is not set
configs/stxssa_4M_defconfig deleted +0 -5
deleted file mode 100644
index 7547906..0000000
@@ -1,5 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_STXSSA=y
-CONFIG_SYS_EXTRA_OPTIONS="STXSSA_4M"
-# CONFIG_CMD_SETEXPR is not set
configs/stxssa_defconfig deleted +0 -4
deleted file mode 100644
index c072417..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_STXSSA=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/stxgp3.h deleted +0 -355

355 lines not on this page · raw message

include/configs/stxssa.h deleted +0 -441

441 lines not on this page · raw message

Signature · 1 line
1.9.1
#23 lore raw

RFC PATCH 19/28 powerpc: remove MPC8540ADS support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig        |   4 -
 board/freescale/mpc8540ads/Kconfig      |  12 -
 board/freescale/mpc8540ads/MAINTAINERS  |   6 -
 board/freescale/mpc8540ads/Makefile     |  11 -
 board/freescale/mpc8540ads/ddr.c        |  46 ----
 board/freescale/mpc8540ads/law.c        |  42 ---
 board/freescale/mpc8540ads/mpc8540ads.c | 242 -----------------
 board/freescale/mpc8540ads/tlb.c        |  95 -------
 configs/MPC8540ADS_defconfig            |   3 -
 include/configs/MPC8540ADS.h            | 448 --------------------------------
 10 files changed, 909 deletions(-)
 delete mode 100644 board/freescale/mpc8540ads/Kconfig
 delete mode 100644 board/freescale/mpc8540ads/MAINTAINERS
 delete mode 100644 board/freescale/mpc8540ads/Makefile
 delete mode 100644 board/freescale/mpc8540ads/ddr.c
 delete mode 100644 board/freescale/mpc8540ads/law.c
 delete mode 100644 board/freescale/mpc8540ads/mpc8540ads.c
 delete mode 100644 board/freescale/mpc8540ads/tlb.c
 delete mode 100644 configs/MPC8540ADS_defconfig
 delete mode 100644 include/configs/MPC8540ADS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
index 8907b03..33123db 100644
@@ -43,9 +43,6 @@ config TARGET_P5040DS
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
 
-config TARGET_MPC8540ADS
-	bool "Support MPC8540ADS"
-
 config TARGET_MPC8541CDS
 	bool "Support MPC8541CDS"
 
@@ -154,7 +151,6 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8540ads/Kconfig"
 source "board/freescale/mpc8541cds/Kconfig"
 source "board/freescale/mpc8544ds/Kconfig"
 source "board/freescale/mpc8548cds/Kconfig"
board/freescale/mpc8540ads/Kconfig deleted +0 -12
deleted file mode 100644
index 35a8545..0000000
@@ -1,12 +0,0 @@
-if TARGET_MPC8540ADS
-
-config SYS_BOARD
-	default "mpc8540ads"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8540ADS"
-
-endif
board/freescale/mpc8540ads/MAINTAINERS deleted +0 -6
deleted file mode 100644
index acc4821..0000000
@@ -1,6 +0,0 @@
-MPC8540ADS BOARD
-#M:	Kumar Gala <[email protected]>
-S:	Orphan (since 2014-06)
-F:	board/freescale/mpc8540ads/
-F:	include/configs/MPC8540ADS.h
-F:	configs/MPC8540ADS_defconfig
board/freescale/mpc8540ads/Makefile deleted +0 -11
deleted file mode 100644
index 6f82c7f..0000000
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8540ads.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
board/freescale/mpc8540ads/ddr.c deleted +0 -46

46 lines not on this page · raw message

board/freescale/mpc8540ads/law.c deleted +0 -42

42 lines not on this page · raw message

board/freescale/mpc8540ads/mpc8540ads.c deleted +0 -242

242 lines not on this page · raw message

board/freescale/mpc8540ads/tlb.c deleted +0 -95

95 lines not on this page · raw message

configs/MPC8540ADS_defconfig deleted +0 -3
deleted file mode 100644
index 41af349..0000000
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8540ADS=y
include/configs/MPC8540ADS.h deleted +0 -448

448 lines not on this page · raw message

Signature · 1 line
1.9.1
#24 lore raw

RFC PATCH 20/28 powerpc: remove MPC8541CDS support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig        |   4 -
 board/freescale/mpc8541cds/Kconfig      |  12 -
 board/freescale/mpc8541cds/MAINTAINERS  |   7 -
 board/freescale/mpc8541cds/Makefile     |  12 -
 board/freescale/mpc8541cds/ddr.c        |  56 ----
 board/freescale/mpc8541cds/law.c        |  42 ---
 board/freescale/mpc8541cds/mpc8541cds.c | 427 -----------------------------
 board/freescale/mpc8541cds/tlb.c        |  96 -------
 configs/MPC8541CDS_defconfig            |   3 -
 configs/MPC8541CDS_legacy_defconfig     |   4 -
 include/configs/MPC8541CDS.h            | 465 --------------------------------
 11 files changed, 1128 deletions(-)
 delete mode 100644 board/freescale/mpc8541cds/Kconfig
 delete mode 100644 board/freescale/mpc8541cds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8541cds/Makefile
 delete mode 100644 board/freescale/mpc8541cds/ddr.c
 delete mode 100644 board/freescale/mpc8541cds/law.c
 delete mode 100644 board/freescale/mpc8541cds/mpc8541cds.c
 delete mode 100644 board/freescale/mpc8541cds/tlb.c
 delete mode 100644 configs/MPC8541CDS_defconfig
 delete mode 100644 configs/MPC8541CDS_legacy_defconfig
 delete mode 100644 include/configs/MPC8541CDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
index 33123db..912783d 100644
@@ -43,9 +43,6 @@ config TARGET_P5040DS
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
 
-config TARGET_MPC8541CDS
-	bool "Support MPC8541CDS"
-
 config TARGET_MPC8544DS
 	bool "Support MPC8544DS"
 
@@ -151,7 +148,6 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8541cds/Kconfig"
 source "board/freescale/mpc8544ds/Kconfig"
 source "board/freescale/mpc8548cds/Kconfig"
 source "board/freescale/mpc8555cds/Kconfig"
board/freescale/mpc8541cds/Kconfig deleted +0 -12
deleted file mode 100644
index 034eab2..0000000
@@ -1,12 +0,0 @@
-if TARGET_MPC8541CDS
-
-config SYS_BOARD
-	default "mpc8541cds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8541CDS"
-
-endif
board/freescale/mpc8541cds/MAINTAINERS deleted +0 -7
deleted file mode 100644
index d421b12..0000000
@@ -1,7 +0,0 @@
-MPC8541CDS BOARD
-#M:	Kumar Gala <[email protected]>
-S:	Orphan (since 2014-06)
-F:	board/freescale/mpc8541cds/
-F:	include/configs/MPC8541CDS.h
-F:	configs/MPC8541CDS_defconfig
-F:	configs/MPC8541CDS_legacy_defconfig
board/freescale/mpc8541cds/Makefile deleted +0 -12
deleted file mode 100644
index 78af4b8..0000000
@@ -1,12 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8541cds.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
board/freescale/mpc8541cds/ddr.c deleted +0 -56

56 lines not on this page · raw message

board/freescale/mpc8541cds/law.c deleted +0 -42

42 lines not on this page · raw message

board/freescale/mpc8541cds/mpc8541cds.c deleted +0 -427

427 lines not on this page · raw message

board/freescale/mpc8541cds/tlb.c deleted +0 -96

96 lines not on this page · raw message

configs/MPC8541CDS_defconfig deleted +0 -3
deleted file mode 100644
index bc9c246..0000000
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8541CDS=y
configs/MPC8541CDS_legacy_defconfig deleted +0 -4
deleted file mode 100644
index 55478ab..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8541CDS=y
-CONFIG_SYS_EXTRA_OPTIONS="LEGACY"
include/configs/MPC8541CDS.h deleted +0 -465

465 lines not on this page · raw message

Signature · 1 line
1.9.1
#25 lore raw

RFC PATCH 21/28 powerpc: remove MPC8544DS support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig      |   4 -
 board/freescale/mpc8544ds/Kconfig     |  12 -
 board/freescale/mpc8544ds/MAINTAINERS |   6 -
 board/freescale/mpc8544ds/Makefile    |  12 -
 board/freescale/mpc8544ds/README      | 122 --------
 board/freescale/mpc8544ds/ddr.c       |  59 ----
 board/freescale/mpc8544ds/law.c       |  18 --
 board/freescale/mpc8544ds/mpc8544ds.c | 320 ---------------------
 board/freescale/mpc8544ds/tlb.c       |  75 -----
 configs/MPC8544DS_defconfig           |   3 -
 include/configs/MPC8544DS.h           | 514 ----------------------------------
 11 files changed, 1145 deletions(-)
 delete mode 100644 board/freescale/mpc8544ds/Kconfig
 delete mode 100644 board/freescale/mpc8544ds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8544ds/Makefile
 delete mode 100644 board/freescale/mpc8544ds/README
 delete mode 100644 board/freescale/mpc8544ds/ddr.c
 delete mode 100644 board/freescale/mpc8544ds/law.c
 delete mode 100644 board/freescale/mpc8544ds/mpc8544ds.c
 delete mode 100644 board/freescale/mpc8544ds/tlb.c
 delete mode 100644 configs/MPC8544DS_defconfig
 delete mode 100644 include/configs/MPC8544DS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
index 912783d..1922045 100644
@@ -43,9 +43,6 @@ config TARGET_P5040DS
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
 
-config TARGET_MPC8544DS
-	bool "Support MPC8544DS"
-
 config TARGET_MPC8548CDS
 	bool "Support MPC8548CDS"
 
@@ -148,7 +145,6 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8544ds/Kconfig"
 source "board/freescale/mpc8548cds/Kconfig"
 source "board/freescale/mpc8555cds/Kconfig"
 source "board/freescale/mpc8560ads/Kconfig"
board/freescale/mpc8544ds/Kconfig deleted +0 -12
deleted file mode 100644
index c3e25b8..0000000
@@ -1,12 +0,0 @@
-if TARGET_MPC8544DS
-
-config SYS_BOARD
-	default "mpc8544ds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8544DS"
-
-endif
board/freescale/mpc8544ds/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 328be7f..0000000
@@ -1,6 +0,0 @@
-MPC8544DS BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/mpc8544ds/
-F:	include/configs/MPC8544DS.h
-F:	configs/MPC8544DS_defconfig
board/freescale/mpc8544ds/Makefile deleted +0 -12
deleted file mode 100644
index 3359eea..0000000
@@ -1,12 +0,0 @@
-#
-# Copyright 2007 Freescale Semiconductor, Inc.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8544ds.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
board/freescale/mpc8544ds/README deleted +0 -122

122 lines not on this page · raw message

board/freescale/mpc8544ds/ddr.c deleted +0 -59

59 lines not on this page · raw message

board/freescale/mpc8544ds/law.c deleted +0 -18
deleted file mode 100644
index e72a1f4..0000000
@@ -1,18 +0,0 @@
-/*
- * Copyright 2008, 2010 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_LBC_NONCACHE_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
board/freescale/mpc8544ds/mpc8544ds.c deleted +0 -320

320 lines not on this page · raw message

board/freescale/mpc8544ds/tlb.c deleted +0 -75

75 lines not on this page · raw message

configs/MPC8544DS_defconfig deleted +0 -3
deleted file mode 100644
index faeaa94..0000000
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8544DS=y
include/configs/MPC8544DS.h deleted +0 -514

514 lines not on this page · raw message

Signature · 1 line
1.9.1
#26 lore raw

RFC PATCH 22/28 powerpc: remove MPC8548CDS support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig        |   4 -
 board/freescale/mpc8548cds/Kconfig      |  12 -
 board/freescale/mpc8548cds/MAINTAINERS  |   8 -
 board/freescale/mpc8548cds/Makefile     |  12 -
 board/freescale/mpc8548cds/ddr.c        |  56 ---
 board/freescale/mpc8548cds/law.c        |  19 -
 board/freescale/mpc8548cds/mpc8548cds.c | 358 -------------------
 board/freescale/mpc8548cds/tlb.c        |  87 -----
 configs/MPC8548CDS_36BIT_defconfig      |   4 -
 configs/MPC8548CDS_defconfig            |   3 -
 configs/MPC8548CDS_legacy_defconfig     |   4 -
 include/configs/MPC8548CDS.h            | 605 --------------------------------
 12 files changed, 1172 deletions(-)
 delete mode 100644 board/freescale/mpc8548cds/Kconfig
 delete mode 100644 board/freescale/mpc8548cds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8548cds/Makefile
 delete mode 100644 board/freescale/mpc8548cds/ddr.c
 delete mode 100644 board/freescale/mpc8548cds/law.c
 delete mode 100644 board/freescale/mpc8548cds/mpc8548cds.c
 delete mode 100644 board/freescale/mpc8548cds/tlb.c
 delete mode 100644 configs/MPC8548CDS_36BIT_defconfig
 delete mode 100644 configs/MPC8548CDS_defconfig
 delete mode 100644 configs/MPC8548CDS_legacy_defconfig
 delete mode 100644 include/configs/MPC8548CDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
index 1922045..d05f943 100644
@@ -43,9 +43,6 @@ config TARGET_P5040DS
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
 
-config TARGET_MPC8548CDS
-	bool "Support MPC8548CDS"
-
 config TARGET_MPC8555CDS
 	bool "Support MPC8555CDS"
 
@@ -145,7 +142,6 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8548cds/Kconfig"
 source "board/freescale/mpc8555cds/Kconfig"
 source "board/freescale/mpc8560ads/Kconfig"
 source "board/freescale/mpc8568mds/Kconfig"
board/freescale/mpc8548cds/Kconfig deleted +0 -12
deleted file mode 100644
index 09f3b0b..0000000
@@ -1,12 +0,0 @@
-if TARGET_MPC8548CDS
-
-config SYS_BOARD
-	default "mpc8548cds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8548CDS"
-
-endif
board/freescale/mpc8548cds/MAINTAINERS deleted +0 -8
deleted file mode 100644
index 6f22922..0000000
@@ -1,8 +0,0 @@
-MPC8548CDS BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/mpc8548cds/
-F:	include/configs/MPC8548CDS.h
-F:	configs/MPC8548CDS_defconfig
-F:	configs/MPC8548CDS_36BIT_defconfig
-F:	configs/MPC8548CDS_legacy_defconfig
board/freescale/mpc8548cds/Makefile deleted +0 -12
deleted file mode 100644
index f797df2..0000000
@@ -1,12 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8548cds.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
board/freescale/mpc8548cds/ddr.c deleted +0 -56

56 lines not on this page · raw message

board/freescale/mpc8548cds/law.c deleted +0 -19
deleted file mode 100644
index 5578fc2..0000000
@@ -1,19 +0,0 @@
-/*
- * Copyright 2008,2010-2011 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	/* LBC window - maps 256M */
-	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
board/freescale/mpc8548cds/mpc8548cds.c deleted +0 -358

358 lines not on this page · raw message

board/freescale/mpc8548cds/tlb.c deleted +0 -87

87 lines not on this page · raw message

configs/MPC8548CDS_36BIT_defconfig deleted +0 -4
deleted file mode 100644
index dfe1fca..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8548CDS=y
-CONFIG_SYS_EXTRA_OPTIONS="36BIT"
configs/MPC8548CDS_defconfig deleted +0 -3
deleted file mode 100644
index ba52e94..0000000
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8548CDS=y
configs/MPC8548CDS_legacy_defconfig deleted +0 -4
deleted file mode 100644
index 69c44af..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8548CDS=y
-CONFIG_SYS_EXTRA_OPTIONS="LEGACY"
include/configs/MPC8548CDS.h deleted +0 -605

605 lines not on this page · raw message

Signature · 1 line
1.9.1
#27 lore raw

RFC PATCH 23/28 powerpc: remove MPC8555CDS support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig        |   4 -
 board/freescale/mpc8555cds/Kconfig      |  12 -
 board/freescale/mpc8555cds/MAINTAINERS  |   7 -
 board/freescale/mpc8555cds/Makefile     |  12 -
 board/freescale/mpc8555cds/ddr.c        |  56 ----
 board/freescale/mpc8555cds/law.c        |  42 ---
 board/freescale/mpc8555cds/mpc8555cds.c | 428 -----------------------------
 board/freescale/mpc8555cds/tlb.c        |  96 -------
 configs/MPC8555CDS_defconfig            |   3 -
 configs/MPC8555CDS_legacy_defconfig     |   4 -
 include/configs/MPC8555CDS.h            | 461 --------------------------------
 11 files changed, 1125 deletions(-)
 delete mode 100644 board/freescale/mpc8555cds/Kconfig
 delete mode 100644 board/freescale/mpc8555cds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8555cds/Makefile
 delete mode 100644 board/freescale/mpc8555cds/ddr.c
 delete mode 100644 board/freescale/mpc8555cds/law.c
 delete mode 100644 board/freescale/mpc8555cds/mpc8555cds.c
 delete mode 100644 board/freescale/mpc8555cds/tlb.c
 delete mode 100644 configs/MPC8555CDS_defconfig
 delete mode 100644 configs/MPC8555CDS_legacy_defconfig
 delete mode 100644 include/configs/MPC8555CDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
index d05f943..af73a06 100644
@@ -43,9 +43,6 @@ config TARGET_P5040DS
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
 
-config TARGET_MPC8555CDS
-	bool "Support MPC8555CDS"
-
 config TARGET_MPC8560ADS
 	bool "Support MPC8560ADS"
 
@@ -142,7 +139,6 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8555cds/Kconfig"
 source "board/freescale/mpc8560ads/Kconfig"
 source "board/freescale/mpc8568mds/Kconfig"
 source "board/freescale/mpc8569mds/Kconfig"
board/freescale/mpc8555cds/Kconfig deleted +0 -12
deleted file mode 100644
index 04bd572..0000000
@@ -1,12 +0,0 @@
-if TARGET_MPC8555CDS
-
-config SYS_BOARD
-	default "mpc8555cds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8555CDS"
-
-endif
board/freescale/mpc8555cds/MAINTAINERS deleted +0 -7
deleted file mode 100644
index 1ef6690..0000000
@@ -1,7 +0,0 @@
-MPC8555CDS BOARD
-#M:	Kumar Gala <[email protected]>
-S:	Orphan (since 2014-06)
-F:	board/freescale/mpc8555cds/
-F:	include/configs/MPC8555CDS.h
-F:	configs/MPC8555CDS_defconfig
-F:	configs/MPC8555CDS_legacy_defconfig
board/freescale/mpc8555cds/Makefile deleted +0 -12
deleted file mode 100644
index d32d005..0000000
@@ -1,12 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8555cds.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
board/freescale/mpc8555cds/ddr.c deleted +0 -56

56 lines not on this page · raw message

board/freescale/mpc8555cds/law.c deleted +0 -42

42 lines not on this page · raw message

board/freescale/mpc8555cds/mpc8555cds.c deleted +0 -428

428 lines not on this page · raw message

board/freescale/mpc8555cds/tlb.c deleted +0 -96

96 lines not on this page · raw message

configs/MPC8555CDS_defconfig deleted +0 -3
deleted file mode 100644
index 3bdbb0c..0000000
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8555CDS=y
configs/MPC8555CDS_legacy_defconfig deleted +0 -4
deleted file mode 100644
index 8e53ee0..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8555CDS=y
-CONFIG_SYS_EXTRA_OPTIONS="LEGACY"
include/configs/MPC8555CDS.h deleted +0 -461

461 lines not on this page · raw message

Signature · 1 line
1.9.1
#28 lore raw

RFC PATCH 24/28 powerpc: remove MPC8560ADS support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig        |   4 -
 board/freescale/mpc8560ads/Kconfig      |  12 -
 board/freescale/mpc8560ads/MAINTAINERS  |   6 -
 board/freescale/mpc8560ads/Makefile     |  11 -
 board/freescale/mpc8560ads/ddr.c        |  46 ---
 board/freescale/mpc8560ads/law.c        |  42 ---
 board/freescale/mpc8560ads/mpc8560ads.c | 462 ------------------------------
 board/freescale/mpc8560ads/tlb.c        |  95 -------
 configs/MPC8560ADS_defconfig            |   3 -
 include/configs/MPC8560ADS.h            | 488 --------------------------------
 10 files changed, 1169 deletions(-)
 delete mode 100644 board/freescale/mpc8560ads/Kconfig
 delete mode 100644 board/freescale/mpc8560ads/MAINTAINERS
 delete mode 100644 board/freescale/mpc8560ads/Makefile
 delete mode 100644 board/freescale/mpc8560ads/ddr.c
 delete mode 100644 board/freescale/mpc8560ads/law.c
 delete mode 100644 board/freescale/mpc8560ads/mpc8560ads.c
 delete mode 100644 board/freescale/mpc8560ads/tlb.c
 delete mode 100644 configs/MPC8560ADS_defconfig
 delete mode 100644 include/configs/MPC8560ADS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
index af73a06..9c58526 100644
@@ -43,9 +43,6 @@ config TARGET_P5040DS
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
 
-config TARGET_MPC8560ADS
-	bool "Support MPC8560ADS"
-
 config TARGET_MPC8568MDS
 	bool "Support MPC8568MDS"
 
@@ -139,7 +136,6 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8560ads/Kconfig"
 source "board/freescale/mpc8568mds/Kconfig"
 source "board/freescale/mpc8569mds/Kconfig"
 source "board/freescale/mpc8572ds/Kconfig"
board/freescale/mpc8560ads/Kconfig deleted +0 -12
deleted file mode 100644
index 828c068..0000000
@@ -1,12 +0,0 @@
-if TARGET_MPC8560ADS
-
-config SYS_BOARD
-	default "mpc8560ads"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8560ADS"
-
-endif
board/freescale/mpc8560ads/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 96e6da2..0000000
@@ -1,6 +0,0 @@
-MPC8560ADS BOARD
-#M:	Kumar Gala <[email protected]>
-S:	Orphan (since 2014-06)
-F:	board/freescale/mpc8560ads/
-F:	include/configs/MPC8560ADS.h
-F:	configs/MPC8560ADS_defconfig
board/freescale/mpc8560ads/Makefile deleted +0 -11
deleted file mode 100644
index 685168e..0000000
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8560ads.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
board/freescale/mpc8560ads/ddr.c deleted +0 -46

46 lines not on this page · raw message

board/freescale/mpc8560ads/law.c deleted +0 -42

42 lines not on this page · raw message

board/freescale/mpc8560ads/mpc8560ads.c deleted +0 -462

462 lines not on this page · raw message

board/freescale/mpc8560ads/tlb.c deleted +0 -95

95 lines not on this page · raw message

configs/MPC8560ADS_defconfig deleted +0 -3
deleted file mode 100644
index aa84d28..0000000
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8560ADS=y
include/configs/MPC8560ADS.h deleted +0 -488

488 lines not on this page · raw message

Signature · 1 line
1.9.1
#29 lore raw

RFC PATCH 25/28 powerpc: remove MPC8568MDS support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig        |   4 -
 board/freescale/mpc8568mds/Kconfig      |  12 -
 board/freescale/mpc8568mds/MAINTAINERS  |   6 -
 board/freescale/mpc8568mds/Makefile     |  13 -
 board/freescale/mpc8568mds/bcsr.c       |  61 ----
 board/freescale/mpc8568mds/bcsr.h       |  93 ------
 board/freescale/mpc8568mds/ddr.c        |  56 ----
 board/freescale/mpc8568mds/law.c        |  41 ---
 board/freescale/mpc8568mds/mpc8568mds.c | 356 -----------------------
 board/freescale/mpc8568mds/tlb.c        |  84 ------
 configs/MPC8568MDS_defconfig            |   3 -
 include/configs/MPC8568MDS.h            | 490 --------------------------------
 12 files changed, 1219 deletions(-)
 delete mode 100644 board/freescale/mpc8568mds/Kconfig
 delete mode 100644 board/freescale/mpc8568mds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8568mds/Makefile
 delete mode 100644 board/freescale/mpc8568mds/bcsr.c
 delete mode 100644 board/freescale/mpc8568mds/bcsr.h
 delete mode 100644 board/freescale/mpc8568mds/ddr.c
 delete mode 100644 board/freescale/mpc8568mds/law.c
 delete mode 100644 board/freescale/mpc8568mds/mpc8568mds.c
 delete mode 100644 board/freescale/mpc8568mds/tlb.c
 delete mode 100644 configs/MPC8568MDS_defconfig
 delete mode 100644 include/configs/MPC8568MDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
index 9c58526..2e4edb3 100644
@@ -43,9 +43,6 @@ config TARGET_P5040DS
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
 
-config TARGET_MPC8568MDS
-	bool "Support MPC8568MDS"
-
 config TARGET_MPC8569MDS
 	bool "Support MPC8569MDS"
 
@@ -136,7 +133,6 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8568mds/Kconfig"
 source "board/freescale/mpc8569mds/Kconfig"
 source "board/freescale/mpc8572ds/Kconfig"
 source "board/freescale/p1010rdb/Kconfig"
board/freescale/mpc8568mds/Kconfig deleted +0 -12
deleted file mode 100644
index 4e178c5..0000000
@@ -1,12 +0,0 @@
-if TARGET_MPC8568MDS
-
-config SYS_BOARD
-	default "mpc8568mds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8568MDS"
-
-endif
board/freescale/mpc8568mds/MAINTAINERS deleted +0 -6
deleted file mode 100644
index 379d8cc..0000000
@@ -1,6 +0,0 @@
-MPC8568MDS BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/mpc8568mds/
-F:	include/configs/MPC8568MDS.h
-F:	configs/MPC8568MDS_defconfig
board/freescale/mpc8568mds/Makefile deleted +0 -13
deleted file mode 100644
index 612fb51..0000000
@@ -1,13 +0,0 @@
-#
-# Copyright 2004-2007 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8568mds.o
-obj-y	+= bcsr.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
board/freescale/mpc8568mds/bcsr.c deleted +0 -61

61 lines not on this page · raw message

board/freescale/mpc8568mds/bcsr.h deleted +0 -93

93 lines not on this page · raw message

board/freescale/mpc8568mds/ddr.c deleted +0 -56

56 lines not on this page · raw message

board/freescale/mpc8568mds/law.c deleted +0 -41

41 lines not on this page · raw message

board/freescale/mpc8568mds/mpc8568mds.c deleted +0 -356

356 lines not on this page · raw message

board/freescale/mpc8568mds/tlb.c deleted +0 -84

84 lines not on this page · raw message

configs/MPC8568MDS_defconfig deleted +0 -3
deleted file mode 100644
index ac0ec8c..0000000
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8568MDS=y
include/configs/MPC8568MDS.h deleted +0 -490

490 lines not on this page · raw message

Signature · 1 line
1.9.1
#30 lore raw

RFC PATCH 26/28 powerpc: remove MPC8569MDS support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc85xx/Kconfig        |   4 -
 board/freescale/mpc8569mds/Kconfig      |  12 -
 board/freescale/mpc8569mds/MAINTAINERS  |   7 -
 board/freescale/mpc8569mds/Makefile     |  13 -
 board/freescale/mpc8569mds/README       |  77 -----
 board/freescale/mpc8569mds/bcsr.c       |  50 ---
 board/freescale/mpc8569mds/bcsr.h       |  72 ----
 board/freescale/mpc8569mds/ddr.c        |  66 ----
 board/freescale/mpc8569mds/law.c        |  41 ---
 board/freescale/mpc8569mds/mpc8569mds.c | 585 --------------------------------
 board/freescale/mpc8569mds/tlb.c        |  95 ------
 configs/MPC8569MDS_ATM_defconfig        |   4 -
 configs/MPC8569MDS_defconfig            |   3 -
 include/configs/MPC8569MDS.h            | 583 -------------------------------
 14 files changed, 1612 deletions(-)
 delete mode 100644 board/freescale/mpc8569mds/Kconfig
 delete mode 100644 board/freescale/mpc8569mds/MAINTAINERS
 delete mode 100644 board/freescale/mpc8569mds/Makefile
 delete mode 100644 board/freescale/mpc8569mds/README
 delete mode 100644 board/freescale/mpc8569mds/bcsr.c
 delete mode 100644 board/freescale/mpc8569mds/bcsr.h
 delete mode 100644 board/freescale/mpc8569mds/ddr.c
 delete mode 100644 board/freescale/mpc8569mds/law.c
 delete mode 100644 board/freescale/mpc8569mds/mpc8569mds.c
 delete mode 100644 board/freescale/mpc8569mds/tlb.c
 delete mode 100644 configs/MPC8569MDS_ATM_defconfig
 delete mode 100644 configs/MPC8569MDS_defconfig
 delete mode 100644 include/configs/MPC8569MDS.h
arch/powerpc/cpu/mpc85xx/Kconfig +0 -4
index 2e4edb3..136f3be 100644
@@ -43,9 +43,6 @@ config TARGET_P5040DS
 config TARGET_MPC8536DS
 	bool "Support MPC8536DS"
 
-config TARGET_MPC8569MDS
-	bool "Support MPC8569MDS"
-
 config TARGET_MPC8572DS
 	bool "Support MPC8572DS"
 
@@ -133,7 +130,6 @@ source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8569mds/Kconfig"
 source "board/freescale/mpc8572ds/Kconfig"
 source "board/freescale/p1010rdb/Kconfig"
 source "board/freescale/p1022ds/Kconfig"
board/freescale/mpc8569mds/Kconfig deleted +0 -12
deleted file mode 100644
index 4871857..0000000
@@ -1,12 +0,0 @@
-if TARGET_MPC8569MDS
-
-config SYS_BOARD
-	default "mpc8569mds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8569MDS"
-
-endif
board/freescale/mpc8569mds/MAINTAINERS deleted +0 -7
deleted file mode 100644
index c181407..0000000
@@ -1,7 +0,0 @@
-MPC8569MDS BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/mpc8569mds/
-F:	include/configs/MPC8569MDS.h
-F:	configs/MPC8569MDS_defconfig
-F:	configs/MPC8569MDS_ATM_defconfig
board/freescale/mpc8569mds/Makefile deleted +0 -13
deleted file mode 100644
index 5f6e021..0000000
@@ -1,13 +0,0 @@
-#
-# Copyright 2004-2009 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8569mds.o
-obj-y	+= bcsr.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
board/freescale/mpc8569mds/README deleted +0 -77

77 lines not on this page · raw message

board/freescale/mpc8569mds/bcsr.c deleted +0 -50

50 lines not on this page · raw message

board/freescale/mpc8569mds/bcsr.h deleted +0 -72

72 lines not on this page · raw message

board/freescale/mpc8569mds/ddr.c deleted +0 -66

66 lines not on this page · raw message

board/freescale/mpc8569mds/law.c deleted +0 -41

41 lines not on this page · raw message

board/freescale/mpc8569mds/mpc8569mds.c deleted +0 -585

585 lines not on this page · raw message

board/freescale/mpc8569mds/tlb.c deleted +0 -95

95 lines not on this page · raw message

configs/MPC8569MDS_ATM_defconfig deleted +0 -4
deleted file mode 100644
index 326983d..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8569MDS=y
-CONFIG_SYS_EXTRA_OPTIONS="ATM"
configs/MPC8569MDS_defconfig deleted +0 -3
deleted file mode 100644
index 81fb82a..0000000
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_MPC8569MDS=y
include/configs/MPC8569MDS.h deleted +0 -583

583 lines not on this page · raw message

Signature · 1 line
1.9.1
#31 lore raw

RFC PATCH 27/28 powerpc: remove MPC8610HPCD support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc86xx/Kconfig              |   4 -
 board/freescale/mpc8610hpcd/Kconfig           |  12 -
 board/freescale/mpc8610hpcd/MAINTAINERS       |   6 -
 board/freescale/mpc8610hpcd/Makefile          |   9 -
 board/freescale/mpc8610hpcd/README            |  73 ---
 board/freescale/mpc8610hpcd/ddr.c             |  59 ---
 board/freescale/mpc8610hpcd/law.c             |  22 -
 board/freescale/mpc8610hpcd/mpc8610hpcd.c     | 329 -------------
 board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c |  71 ---
 configs/MPC8610HPCD_defconfig                 |   4 -
 include/configs/MPC8610HPCD.h                 | 666 --------------------------
 11 files changed, 1255 deletions(-)
 delete mode 100644 board/freescale/mpc8610hpcd/Kconfig
 delete mode 100644 board/freescale/mpc8610hpcd/MAINTAINERS
 delete mode 100644 board/freescale/mpc8610hpcd/Makefile
 delete mode 100644 board/freescale/mpc8610hpcd/README
 delete mode 100644 board/freescale/mpc8610hpcd/ddr.c
 delete mode 100644 board/freescale/mpc8610hpcd/law.c
 delete mode 100644 board/freescale/mpc8610hpcd/mpc8610hpcd.c
 delete mode 100644 board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
 delete mode 100644 configs/MPC8610HPCD_defconfig
 delete mode 100644 include/configs/MPC8610HPCD.h
arch/powerpc/cpu/mpc86xx/Kconfig +0 -4
index fe1859d..46d15e2 100644
@@ -11,9 +11,6 @@ choice
 config TARGET_SBC8641D
 	bool "Support sbc8641d"
 
-config TARGET_MPC8610HPCD
-	bool "Support MPC8610HPCD"
-
 config TARGET_MPC8641HPCN
 	bool "Support MPC8641HPCN"
 
@@ -22,7 +19,6 @@ config TARGET_XPEDITE517X
 
 endchoice
 
-source "board/freescale/mpc8610hpcd/Kconfig"
 source "board/freescale/mpc8641hpcn/Kconfig"
 source "board/sbc8641d/Kconfig"
 source "board/xes/xpedite517x/Kconfig"
board/freescale/mpc8610hpcd/Kconfig deleted +0 -12
deleted file mode 100644
index 8f713be..0000000
@@ -1,12 +0,0 @@
-if TARGET_MPC8610HPCD
-
-config SYS_BOARD
-	default "mpc8610hpcd"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8610HPCD"
-
-endif
board/freescale/mpc8610hpcd/MAINTAINERS deleted +0 -6
deleted file mode 100644
index de6ab89..0000000
@@ -1,6 +0,0 @@
-MPC8610HPCD BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/mpc8610hpcd/
-F:	include/configs/MPC8610HPCD.h
-F:	configs/MPC8610HPCD_defconfig
board/freescale/mpc8610hpcd/Makefile deleted +0 -9
deleted file mode 100644
index 2613004..0000000
@@ -1,9 +0,0 @@
-# Copyright 2007 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= mpc8610hpcd.o
-obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
-obj-y	+= law.o
-obj-$(CONFIG_FSL_DIU_FB)	+= mpc8610hpcd_diu.o
board/freescale/mpc8610hpcd/README deleted +0 -73

73 lines not on this page · raw message

board/freescale/mpc8610hpcd/ddr.c deleted +0 -59

59 lines not on this page · raw message

board/freescale/mpc8610hpcd/law.c deleted +0 -22
deleted file mode 100644
index 20b8fed..0000000
@@ -1,22 +0,0 @@
-/*
- * Copyright 2008,2010 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1),
-#endif
-	SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
board/freescale/mpc8610hpcd/mpc8610hpcd.c deleted +0 -329

329 lines not on this page · raw message

board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c deleted +0 -71

71 lines not on this page · raw message

configs/MPC8610HPCD_defconfig deleted +0 -4
deleted file mode 100644
index f0e1370..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC86xx=y
-CONFIG_TARGET_MPC8610HPCD=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/MPC8610HPCD.h deleted +0 -666

666 lines not on this page · raw message

Signature · 1 line
1.9.1
#32 lore raw

RFC PATCH 27/28 powerpc: remove MPC8610HPCD support

Quoted 5 lines · Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

Please give me a day or two to confirm with internal teams to see if there is any need to maintain these boards.

York

#33 lore raw

RFC PATCH 27/28 powerpc: remove MPC8610HPCD support

Quoted 10 lines · York Sun
Quoted 4 lines · Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

Please give me a day or two to confirm with internal teams to see if there is any need to maintain these boards.

Two weeks. You have two weeks :)

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150813/862ce2a5/attachment.sig>
#34 lore raw

RFC PATCH 28/28 powerpc: remove sbc8641d support

In reply to Masahiro Yamada

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc86xx/Kconfig |   4 -
 board/sbc8641d/Kconfig           |   9 -
 board/sbc8641d/MAINTAINERS       |   6 -
 board/sbc8641d/Makefile          |  10 -
 board/sbc8641d/README            |  28 --
 board/sbc8641d/ddr.c             |  56 ----
 board/sbc8641d/law.c             |  40 ---
 board/sbc8641d/sbc8641d.c        | 261 -----------------
 configs/sbc8641d_defconfig       |   4 -
 include/configs/sbc8641d.h       | 590 ---------------------------------------
 10 files changed, 1008 deletions(-)
 delete mode 100644 board/sbc8641d/Kconfig
 delete mode 100644 board/sbc8641d/MAINTAINERS
 delete mode 100644 board/sbc8641d/Makefile
 delete mode 100644 board/sbc8641d/README
 delete mode 100644 board/sbc8641d/ddr.c
 delete mode 100644 board/sbc8641d/law.c
 delete mode 100644 board/sbc8641d/sbc8641d.c
 delete mode 100644 configs/sbc8641d_defconfig
 delete mode 100644 include/configs/sbc8641d.h
arch/powerpc/cpu/mpc86xx/Kconfig +0 -4
index 46d15e2..0dcee70 100644
@@ -8,9 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_SBC8641D
-	bool "Support sbc8641d"
-
 config TARGET_MPC8641HPCN
 	bool "Support MPC8641HPCN"
 
@@ -20,7 +17,6 @@ config TARGET_XPEDITE517X
 endchoice
 
 source "board/freescale/mpc8641hpcn/Kconfig"
-source "board/sbc8641d/Kconfig"
 source "board/xes/xpedite517x/Kconfig"
 
 endmenu
board/sbc8641d/Kconfig deleted +0 -9
deleted file mode 100644
index 8dfc90c..0000000
@@ -1,9 +0,0 @@
-if TARGET_SBC8641D
-
-config SYS_BOARD
-	default "sbc8641d"
-
-config SYS_CONFIG_NAME
-	default "sbc8641d"
-
-endif
board/sbc8641d/MAINTAINERS deleted +0 -6
deleted file mode 100644
index a50b541..0000000
@@ -1,6 +0,0 @@
-SBC8641D BOARD
-M:	Paul Gortmaker <[email protected]>
-S:	Maintained
-F:	board/sbc8641d/
-F:	include/configs/sbc8641d.h
-F:	configs/sbc8641d_defconfig
board/sbc8641d/Makefile deleted +0 -10
deleted file mode 100644
index a9b2026..0000000
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= sbc8641d.o
-obj-y	+= law.o
-obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
board/sbc8641d/README deleted +0 -28
deleted file mode 100644
index a051466..0000000
@@ -1,28 +0,0 @@
-Wind River SBC8641D reference board
-===========================
-
-Created 06/14/2007 Joe Hamman
-Copyright 2007, Embedded Specialties, Inc.
-Copyright 2007 Wind River Systemes, Inc.
------------------------------
-
-1. Building U-Boot
-------------------
-The SBC8641D code is known to build using ELDK 4.1.
-
-    $ make sbc8641d_config
-    Configuring for sbc8641d board...
-
-    $ make
-
-
-2. Switch and Jumper Settings
------------------------------
-All Jumpers & Switches are in their default positions.  Please refer to
-the board documentation for details.  Some settings control CPU voltages
-and settings may change with board revisions.
-
-3. Known limitations
---------------------
-PCI:
-	The PCI command may hang if no boards are present in either slot.
board/sbc8641d/ddr.c deleted +0 -56

56 lines not on this page · raw message

board/sbc8641d/law.c deleted +0 -40
deleted file mode 100644
index c4e736b..0000000
@@ -1,40 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW (Local Access Window) configuration:
- *
- * 0x0000_0000	DDR			256M
- * 0x1000_0000	DDR2			256M
- * 0x8000_0000	PCIE1 MEM		512M
- * 0xa000_0000	PCIE2 MEM		512M
- * 0xc000_0000	RapidIO			512M
- * 0xe200_0000	PCIE1 IO		16M
- * 0xe300_0000	PCIE2 IO		16M
- * 0xf800_0000	CCSRBAR			2M
- * 0xfe00_0000	FLASH (boot bank)	32M
- *
- */
-
-
-struct law_entry law_table[] = {
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		 LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-#endif
-	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
board/sbc8641d/sbc8641d.c deleted +0 -261

261 lines not on this page · raw message

configs/sbc8641d_defconfig deleted +0 -4
deleted file mode 100644
index b67c7c0..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC86xx=y
-CONFIG_TARGET_SBC8641D=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/sbc8641d.h deleted +0 -590

590 lines not on this page · raw message

Signature · 1 line
1.9.1
#35 lore raw

RFC PATCH 28/28 powerpc: remove sbc8641d support

CCing Paul.

Quoted 1,107 lines · On Thu, 13 Aug 2015 19:15:46 +0900 Masahiro Yamada…

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

---

 arch/powerpc/cpu/mpc86xx/Kconfig |   4 -
 board/sbc8641d/Kconfig           |   9 -
 board/sbc8641d/MAINTAINERS       |   6 -
 board/sbc8641d/Makefile          |  10 -
 board/sbc8641d/README            |  28 --
 board/sbc8641d/ddr.c             |  56 ----
 board/sbc8641d/law.c             |  40 ---
 board/sbc8641d/sbc8641d.c        | 261 -----------------
 configs/sbc8641d_defconfig       |   4 -
 include/configs/sbc8641d.h       | 590 ---------------------------------------
 10 files changed, 1008 deletions(-)
 delete mode 100644 board/sbc8641d/Kconfig
 delete mode 100644 board/sbc8641d/MAINTAINERS
 delete mode 100644 board/sbc8641d/Makefile
 delete mode 100644 board/sbc8641d/README
 delete mode 100644 board/sbc8641d/ddr.c
 delete mode 100644 board/sbc8641d/law.c
 delete mode 100644 board/sbc8641d/sbc8641d.c
 delete mode 100644 configs/sbc8641d_defconfig
 delete mode 100644 include/configs/sbc8641d.h
arch/powerpc/cpu/mpc86xx/Kconfig +0 -4
index 46d15e2..0dcee70 100644
@@ -8,9 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_SBC8641D
-	bool "Support sbc8641d"
-
 config TARGET_MPC8641HPCN
 	bool "Support MPC8641HPCN"
 
@@ -20,7 +17,6 @@ config TARGET_XPEDITE517X
 endchoice
 
 source "board/freescale/mpc8641hpcn/Kconfig"
-source "board/sbc8641d/Kconfig"
 source "board/xes/xpedite517x/Kconfig"
 
 endmenu
board/sbc8641d/Kconfig deleted +0 -9
deleted file mode 100644
index 8dfc90c..0000000
@@ -1,9 +0,0 @@
-if TARGET_SBC8641D
-
-config SYS_BOARD
-	default "sbc8641d"
-
-config SYS_CONFIG_NAME
-	default "sbc8641d"
-
-endif
board/sbc8641d/MAINTAINERS deleted +0 -6
deleted file mode 100644
index a50b541..0000000
@@ -1,6 +0,0 @@
-SBC8641D BOARD
-M:	Paul Gortmaker <[email protected]>
-S:	Maintained
-F:	board/sbc8641d/
-F:	include/configs/sbc8641d.h
-F:	configs/sbc8641d_defconfig
board/sbc8641d/Makefile deleted +0 -10
deleted file mode 100644
index a9b2026..0000000
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= sbc8641d.o
-obj-y	+= law.o
-obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
board/sbc8641d/README deleted +0 -28
deleted file mode 100644
index a051466..0000000
@@ -1,28 +0,0 @@
-Wind River SBC8641D reference board
-===========================
-
-Created 06/14/2007 Joe Hamman
-Copyright 2007, Embedded Specialties, Inc.
-Copyright 2007 Wind River Systemes, Inc.
------------------------------
-
-1. Building U-Boot
-------------------
-The SBC8641D code is known to build using ELDK 4.1.
-
-    $ make sbc8641d_config
-    Configuring for sbc8641d board...
-
-    $ make
-
-
-2. Switch and Jumper Settings
------------------------------
-All Jumpers & Switches are in their default positions.  Please refer to
-the board documentation for details.  Some settings control CPU voltages
-and settings may change with board revisions.
-
-3. Known limitations
---------------------
-PCI:
-	The PCI command may hang if no boards are present in either slot.
board/sbc8641d/ddr.c deleted +0 -56
deleted file mode 100644
index b31ea34..0000000
@@ -1,56 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 7;
-
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
-	 */
-	popts->cpo_override = 10;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-}
board/sbc8641d/law.c deleted +0 -40
deleted file mode 100644
index c4e736b..0000000
@@ -1,40 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW (Local Access Window) configuration:
- *
- * 0x0000_0000	DDR			256M
- * 0x1000_0000	DDR2			256M
- * 0x8000_0000	PCIE1 MEM		512M
- * 0xa000_0000	PCIE2 MEM		512M
- * 0xc000_0000	RapidIO			512M
- * 0xe200_0000	PCIE1 IO		16M
- * 0xe300_0000	PCIE2 IO		16M
- * 0xf800_0000	CCSRBAR			2M
- * 0xfe00_0000	FLASH (boot bank)	32M
- *
- */
-
-
-struct law_entry law_table[] = {
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		 LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-#endif
-	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
board/sbc8641d/sbc8641d.c deleted +0 -261
deleted file mode 100644
index 6bdf1a2..0000000
@@ -1,261 +0,0 @@
-/*
- * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
- * Copyright 2007 Embedded Specialties, Inc.
- * Joe Hamman joe.hamman at embeddedspecialties.com
- *
- * Copyright 2004 Freescale Semiconductor.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan at freescale.com)
- *
- * (C) Copyright 2002 Scott McNutt <[email protected]>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_86xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-long int fixed_sdram (void);
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("Board: Wind River SBC8641D\n");
-
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-	debug ("    DDR: ");
-	return dram_size;
-}
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
-	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
-	uint *p;
-
-	puts ("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts ("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts ("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-long int fixed_sdram (void)
-{
-#if !defined(CONFIG_SYS_RAMBOOT)
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile struct ccsr_ddr *ddr = &immap->im_ddr1;
-
-	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
-	ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
-	ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS;
-	ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS;
-	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
-	ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
-	ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG;
-	ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG;
-	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A;
-	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
-	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
-	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
-	ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL;
-	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
-
-	asm ("sync;isync");
-
-	udelay (500);
-
-	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B;
-	asm ("sync; isync");
-
-	udelay (500);
-	ddr = &immap->im_ddr2;
-
-	ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
-	ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS;
-	ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS;
-	ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS;
-	ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG;
-	ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG;
-	ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG;
-	ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG;
-	ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH;
-	ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0;
-	ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1;
-	ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2;
-	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A;
-	ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
-	ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1;
-	ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
-	ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL;
-	ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
-	ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
-	ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
-
-	asm ("sync;isync");
-
-	udelay (500);
-
-	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B;
-	asm ("sync; isync");
-
-	udelay (500);
-#endif
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-}
-#endif				/* !defined(CONFIG_SPD_EEPROM) */
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif /* CONFIG_PCI */
-
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	FT_FSL_PCI_SETUP;
-
-	return 0;
-}
-#endif
-
-void sbc8641d_reset_board (void)
-{
-	puts ("Resetting board....\n");
-}
-
-/*
- * get_board_sys_clk
- *      Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ
- */
-
-unsigned long get_board_sys_clk (ulong dummy)
-{
-	int i;
-	ulong val = 0;
-
-	i = 5;
-	i &= 0x07;
-
-	switch (i) {
-	case 0:
-		val = 33000000;
-		break;
-	case 1:
-		val = 40000000;
-		break;
-	case 2:
-		val = 50000000;
-		break;
-	case 3:
-		val = 66000000;
-		break;
-	case 4:
-		val = 83000000;
-		break;
-	case 5:
-		val = 100000000;
-		break;
-	case 6:
-		val = 134000000;
-		break;
-	case 7:
-		val = 166000000;
-		break;
-	}
-
-	return val;
-}
-
-void board_reset(void)
-{
-#ifdef CONFIG_SYS_RESET_ADDRESS
-	ulong addr = CONFIG_SYS_RESET_ADDRESS;
-
-	/* flush and disable I/D cache */
-	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
-	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
-	__asm__ __volatile__ ("ori	4, 3, 0xc00"	::: "r4");
-	__asm__ __volatile__ ("andc	5, 3, 5"	::: "r5");
-	__asm__ __volatile__ ("sync");
-	__asm__ __volatile__ ("mtspr	1008, 4");
-	__asm__ __volatile__ ("isync");
-	__asm__ __volatile__ ("sync");
-	__asm__ __volatile__ ("mtspr	1008, 5");
-	__asm__ __volatile__ ("isync");
-	__asm__ __volatile__ ("sync");
-
-	/*
-	 * SRR0 has system reset vector, SRR1 has default MSR value
-	 * rfi restores MSR from SRR1 and sets the PC to the SRR0 value
-	 */
-	__asm__ __volatile__ ("mtspr	26, %0"		:: "r" (addr));
-	__asm__ __volatile__ ("li	4, (1 << 6)"	::: "r4");
-	__asm__ __volatile__ ("mtspr	27, 4");
-	__asm__ __volatile__ ("rfi");
-#endif
-}
configs/sbc8641d_defconfig deleted +0 -4
deleted file mode 100644
index b67c7c0..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC86xx=y
-CONFIG_TARGET_SBC8641D=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/sbc8641d.h deleted +0 -590
deleted file mode 100644
index 00aab6b..0000000
@@ -1,590 +0,0 @@
-/*
- * Copyright 2007 Wind River Systems <www.windriver.com>
- * Copyright 2007 Embedded Specialties, Inc.
- * Joe Hamman <[email protected]>
- *
- * Copyright 2006 Freescale Semiconductor.
- *
- * Srikanth Srinivasan (srikanth.srinivasan at freescale.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * SBC8641D board configuration file
- *
- * Make sure you change the MAC address and other network params first,
- * search for CONFIG_SERVERIP, etc in this file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High Level Configuration Options */
-#define CONFIG_MPC8641		1	/* MPC8641 specific */
-#define CONFIG_SBC8641D		1	/* SBC8641D board specific */
-#define CONFIG_MP		1	/* support multiple processors */
-#define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#ifdef RUN_DIAG
-#define CONFIG_SYS_DIAG_ADDR        0xff800000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS    0xfff00100
-
-/*
- * virtual address to be used for temporary mappings.  There
- * should be 128k free at this VA.
- */
-#define CONFIG_SYS_SCRATCH_VA	0xe8000000
-
-#define CONFIG_SYS_SRIO
-#define CONFIG_SRIO1			/* SRIO port 1 */
-
-#define CONFIG_PCI		1	/* Enable PCIE */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
-#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
-#define CONFIG_TSEC_ENET		/* tsec ethernet support */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAT_RW		1	/* Use common BAT rw code */
-#define CONFIG_HIGH_BATS	1	/* High BATs supported and enabled */
-
-#undef CONFIG_SPD_EEPROM		/* Do not use SPD EEPROM for DDR setup*/
-#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
-#define CONFIG_NUM_DDR_CONTROLLERS     2
-#define CACHE_LINE_INTERLEAVING		0x20000000
-#define PAGE_INTERLEAVING		0x21000000
-#define BANK_INTERLEAVING		0x22000000
-#define SUPER_BANK_INTERLEAVING		0x23000000
-
-
-#define CONFIG_ALTIVEC          1
-
-/*
- * L2CR setup -- make sure this is right for your board!
- */
-#define CONFIG_SYS_L2
-#define L2_INIT		0
-#define L2_ENABLE	(L2CR_L2E)
-
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CONFIG_SYS_DRAM_TEST				/* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR		0xf8000000	/* relocated CCSRBAR */
-#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
-
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
-#define CONFIG_SYS_CCSRBAR_PHYS		CONFIG_SYS_CCSRBAR_PHYS_LOW
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory */
-#define CONFIG_SYS_DDR_SDRAM_BASE2	0x10000000	/* DDR bank 2 */
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_BASE2		CONFIG_SYS_DDR_SDRAM_BASE2
-#define CONFIG_SYS_MAX_DDR_BAT_SIZE	0x80000000	/* BAT mapping size */
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS	2
-#define CONFIG_DIMM_SLOTS_PER_CTLR	2
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-#if defined(CONFIG_SPD_EEPROM)
-    /*
-     * Determine DDR configuration from I2C interface.
-     */
-    #define SPD_EEPROM_ADDRESS1		0x51		/* DDR DIMM */
-    #define SPD_EEPROM_ADDRESS2		0x52		/* DDR DIMM */
-    #define SPD_EEPROM_ADDRESS3		0x53		/* DDR DIMM */
-    #define SPD_EEPROM_ADDRESS4		0x54		/* DDR DIMM */
-
-#else
-    /*
-     * Manually set up DDR1 & DDR2 parameters
-     */
-
-    #define CONFIG_SYS_SDRAM_SIZE	512		/* DDR is 512MB */
-
-    #define CONFIG_SYS_DDR_CS0_BNDS	0x0000000F
-    #define CONFIG_SYS_DDR_CS1_BNDS	0x00000000
-    #define CONFIG_SYS_DDR_CS2_BNDS	0x00000000
-    #define CONFIG_SYS_DDR_CS3_BNDS	0x00000000
-    #define CONFIG_SYS_DDR_CS0_CONFIG	0x80010102
-    #define CONFIG_SYS_DDR_CS1_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR_CS2_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR_CS3_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR_TIMING_3 0x00000000
-    #define CONFIG_SYS_DDR_TIMING_0	0x00220802
-    #define CONFIG_SYS_DDR_TIMING_1	0x38377322
-    #define CONFIG_SYS_DDR_TIMING_2	0x002040c7
-    #define CONFIG_SYS_DDR_CFG_1A	0x43008008
-    #define CONFIG_SYS_DDR_CFG_2	0x24401000
-    #define CONFIG_SYS_DDR_MODE_1	0x23c00542
-    #define CONFIG_SYS_DDR_MODE_2	0x00000000
-    #define CONFIG_SYS_DDR_MODE_CTL	0x00000000
-    #define CONFIG_SYS_DDR_INTERVAL	0x05080100
-    #define CONFIG_SYS_DDR_DATA_INIT	0x00000000
-    #define CONFIG_SYS_DDR_CLK_CTRL	0x03800000
-    #define CONFIG_SYS_DDR_CFG_1B	0xC3008008
-
-    #define CONFIG_SYS_DDR2_CS0_BNDS	0x0010001F
-    #define CONFIG_SYS_DDR2_CS1_BNDS	0x00000000
-    #define CONFIG_SYS_DDR2_CS2_BNDS	0x00000000
-    #define CONFIG_SYS_DDR2_CS3_BNDS	0x00000000
-    #define CONFIG_SYS_DDR2_CS0_CONFIG	0x80010102
-    #define CONFIG_SYS_DDR2_CS1_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR2_CS2_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR2_CS3_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR2_EXT_REFRESH 0x00000000
-    #define CONFIG_SYS_DDR2_TIMING_0	0x00220802
-    #define CONFIG_SYS_DDR2_TIMING_1	0x38377322
-    #define CONFIG_SYS_DDR2_TIMING_2	0x002040c7
-    #define CONFIG_SYS_DDR2_CFG_1A	0x43008008
-    #define CONFIG_SYS_DDR2_CFG_2	0x24401000
-    #define CONFIG_SYS_DDR2_MODE_1	0x23c00542
-    #define CONFIG_SYS_DDR2_MODE_2	0x00000000
-    #define CONFIG_SYS_DDR2_MODE_CTL	0x00000000
-    #define CONFIG_SYS_DDR2_INTERVAL	0x05080100
-    #define CONFIG_SYS_DDR2_DATA_INIT	0x00000000
-    #define CONFIG_SYS_DDR2_CLK_CTRL	0x03800000
-    #define CONFIG_SYS_DDR2_CFG_1B	0xC3008008
-
-
-#endif
-
-/* #define CONFIG_ID_EEPROM	1
-#define ID_EEPROM_ADDR 0x57 */
-
-/*
- * The SBC8641D contains 16MB flash space at ff000000.
- */
-#define CONFIG_SYS_FLASH_BASE      0xff000000  /* start of FLASH 16M */
-
-/* Flash */
-#define CONFIG_SYS_BR0_PRELIM		0xff001001	/* port size 16bit */
-#define CONFIG_SYS_OR0_PRELIM		0xff006e65	/* 16MB Boot Flash area */
-
-/* 64KB EEPROM */
-#define CONFIG_SYS_BR1_PRELIM		0xf0000801	/* port size 16bit */
-#define CONFIG_SYS_OR1_PRELIM		0xffff6e65	/* 64K EEPROM area */
-
-/* EPLD - User switches, board id, LEDs */
-#define CONFIG_SYS_BR2_PRELIM		0xf1000801	/* port size 16bit */
-#define CONFIG_SYS_OR2_PRELIM		0xfff06e65	/* EPLD (switches, board ID, LEDs) area */
-
-/* Local bus SDRAM 128MB */
-#define CONFIG_SYS_BR3_PRELIM		0xe0001861	/* port size ?bit */
-#define CONFIG_SYS_OR3_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (1st half) */
-#define CONFIG_SYS_BR4_PRELIM		0xe4001861	/* port size ?bit */
-#define CONFIG_SYS_OR4_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (2nd half) */
-
-/* Disk on Chip (DOC) 128MB */
-#define CONFIG_SYS_BR5_PRELIM		0xe8001001	/* port size ?bit */
-#define CONFIG_SYS_OR5_PRELIM		0xf8006e65	/* 128MB local bus SDRAM area (2nd half) */
-
-/* LCD */
-#define CONFIG_SYS_BR6_PRELIM		0xf4000801	/* port size ?bit */
-#define CONFIG_SYS_OR6_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */
-
-/* Control logic & misc peripherals */
-#define CONFIG_SYS_BR7_PRELIM		0xf2000801	/* port size ?bit */
-#define CONFIG_SYS_OR7_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	131		/* sectors per device */
-
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000	/* early monitor loc */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_WRITE_SWAPPED_DATA
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_PROTECTION
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#ifndef CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR	0xf8400000	/* Initial RAM address */
-#endif
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
-
-/* Serial Port */
-#define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
-
-/*
- * Pass open firmware flat tree to kernel
- */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
-
-/*
- * RapidIO MMU
- */
-#define CONFIG_SYS_SRIO1_MEM_BASE	0xc0000000	/* base address */
-#define CONFIG_SYS_SRIO1_MEM_PHYS	CONFIG_SYS_SRIO1_MEM_BASE
-#define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 128M */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS
-#define CONFIG_SYS_PCIE1_MEM_VIRT	CONFIG_SYS_PCIE1_MEM_BUS
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS		0xe2000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	CONFIG_SYS_PCIE1_IO_BUS
-#define CONFIG_SYS_PCIE1_IO_VIRT	CONFIG_SYS_PCIE1_IO_BUS
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x1000000	/* 16M */
-
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BUS
-#define CONFIG_SYS_PCIE2_MEM_VIRT	CONFIG_SYS_PCIE2_MEM_BUS
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS		0xe3000000
-#define CONFIG_SYS_PCIE2_IO_PHYS	CONFIG_SYS_PCIE2_IO_BUS
-#define CONFIG_SYS_PCIE2_IO_VIRT	CONFIG_SYS_PCIE2_IO_BUS
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x1000000	/* 16M */
-
-#if defined(CONFIG_PCI)
-
-#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
-
-#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
-
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
-
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR	0xe0000000
-    #define PCI_ENET0_MEMADDR	0xe0000000
-    #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-
-#define CONFIG_DOS_PARTITION
-#undef CONFIG_SCSI_AHCI
-
-#ifdef CONFIG_SCSI_AHCI
-#define CONFIG_SATA_ULI5288
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
-#define CONFIG_SYS_SCSI_MAX_LUN	1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SYS_SCSI_MAXDEVICE	CONFIG_SYS_SCSI_MAX_DEVICE
-#endif
-
-#endif	/* CONFIG_PCI */
-
-#if defined(CONFIG_TSEC_ENET)
-
-/* #define CONFIG_MII		1 */	/* MII PHY management */
-
-#define CONFIG_TSEC1    1
-#define CONFIG_TSEC1_NAME       "eTSEC1"
-#define CONFIG_TSEC2    1
-#define CONFIG_TSEC2_NAME       "eTSEC2"
-#define CONFIG_TSEC3    1
-#define CONFIG_TSEC3_NAME       "eTSEC3"
-#define CONFIG_TSEC4    1
-#define CONFIG_TSEC4_NAME       "eTSEC4"
-
-#define TSEC1_PHY_ADDR		0x1F
-#define TSEC2_PHY_ADDR		0x00
-#define TSEC3_PHY_ADDR		0x01
-#define TSEC4_PHY_ADDR		0x02
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC3_PHYIDX		0
-#define TSEC4_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-#define TSEC3_FLAGS		TSEC_GIGABIT
-#define TSEC4_FLAGS		TSEC_GIGABIT
-
-#define CONFIG_SYS_TBIPA_VALUE	0x1e	/* Set TBI address not to conflict with TSEC1_PHY_ADDR */
-
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * BAT0         2G     Cacheable, non-guarded
- * 0x0000_0000  2G     DDR
- */
-#define CONFIG_SYS_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
-#define CONFIG_SYS_IBAT0U	CONFIG_SYS_DBAT0U
-
-/*
- * BAT1         1G     Cache-inhibited, guarded
- * 0x8000_0000  512M   PCI-Express 1 Memory
- * 0xa000_0000  512M   PCI-Express 2 Memory
- *	Changed it for operating from 0xd0000000
- */
-#define CONFIG_SYS_DBAT1L	( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
-
-/*
- * BAT2         512M   Cache-inhibited, guarded
- * 0xc000_0000  512M   RapidIO Memory
- */
-#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
-
-/*
- * BAT3         4M     Cache-inhibited, guarded
- * 0xf800_0000  4M     CCSR
- */
-#define CONFIG_SYS_DBAT3L	( CONFIG_SYS_CCSRBAR | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U	(CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U	CONFIG_SYS_DBAT3U
-
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
-#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
-				       | BATL_PP_RW | BATL_CACHEINHIBIT \
-				       | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
-				       | BATU_BL_1M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
-				       | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
-#endif
-
-/*
- * BAT4         32M    Cache-inhibited, guarded
- * 0xe200_0000  16M    PCI-Express 1 I/O
- * 0xe300_0000  16M    PCI-Express 2 I/0
- *    Note that this is at 0xe0000000
- */
-#define CONFIG_SYS_DBAT4L	( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
-
-/*
- * BAT5         128K   Cacheable, non-guarded
- * 0xe401_0000  128K   Init RAM for stack in the CPU DCache (no backing memory)
- */
-#define CONFIG_SYS_DBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT5L	CONFIG_SYS_DBAT5L
-#define CONFIG_SYS_IBAT5U	CONFIG_SYS_DBAT5U
-
-/*
- * BAT6         32M    Cache-inhibited, guarded
- * 0xfe00_0000  32M    FLASH
- */
-#define CONFIG_SYS_DBAT6L	((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U	((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT6L	((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U	CONFIG_SYS_DBAT6U
-
-/* Map the last 1M of flash where we're running from reset */
-#define CONFIG_SYS_DBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
-				 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U_EARLY	(CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
-				 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U_EARLY	CONFIG_SYS_DBAT6U_EARLY
-
-#define CONFIG_SYS_DBAT7L	0x00000000
-#define CONFIG_SYS_DBAT7U	0x00000000
-#define CONFIG_SYS_IBAT7L	0x00000000
-#define CONFIG_SYS_IBAT7U	0x00000000
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CONFIG_ENV_SIZE		0x2000
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-#if defined(CONFIG_CMD_KGDB)
-    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-#else
-    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
-
-/* Cache Configuration */
-#define CONFIG_SYS_DCACHE_SIZE		32768
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_HAS_ETH0		1
-#define CONFIG_HAS_ETH1		1
-#define CONFIG_HAS_ETH2		1
-#define CONFIG_HAS_ETH3		1
-
-#define CONFIG_IPADDR		192.168.0.50
-
-#define CONFIG_HOSTNAME		sbc8641d
-#define CONFIG_ROOTPATH		"/opt/eldk/ppc_74xx"
-#define CONFIG_BOOTFILE		"uImage"
-
-#define CONFIG_SERVERIP		192.168.0.2
-#define CONFIG_GATEWAYIP	192.168.0.1
-#define CONFIG_NETMASK		255.255.255.0
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
-#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE	115200
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-   "netdev=eth0\0"							\
-   "consoledev=ttyS0\0"							\
-   "ramdiskaddr=2000000\0"						\
-   "ramdiskfile=uRamdisk\0"						\
-   "dtbaddr=400000\0"							\
-   "dtbfile=sbc8641d.dtb\0"						\
-   "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0"	\
-   "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0"	\
-   "maxcpus=1"
-
-#define CONFIG_NFSBOOTCOMMAND						\
-   "setenv bootargs root=/dev/nfs rw "					\
-      "nfsroot=$serverip:$rootpath "					\
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $dtbaddr $dtbfile;"						\
-   "bootm $loadaddr - $dtbaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-   "setenv bootargs root=/dev/ram rw "					\
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "tftp $ramdiskaddr $ramdiskfile;"					\
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $dtbaddr $dtbfile;"						\
-   "bootm $loadaddr $ramdiskaddr $dtbaddr"
-
-#define CONFIG_FLASHBOOTCOMMAND						\
-   "setenv bootargs root=/dev/ram rw "					\
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "bootm ffd00000 ffb00000 ffa00000"
-
-#define CONFIG_BOOTCOMMAND  CONFIG_FLASHBOOTCOMMAND
-
-#endif	/* __CONFIG_H */
#36 lore raw

RFC PATCH 28/28 powerpc: remove sbc8641d support

Quoted 8 lines · [Re: [RFC PATCH 28/28] powerpc: remove sbc8641d support] On 13/08/2015 (Thu…

CCing Paul.

Quoted 2 lines · On Thu, 13 Aug 2015 19:15:46 +0900 Masahiro Yamada…

This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.)

Thanks for the CC: -- let me have a look next week as to how complex the conversion is, since it is one of the few PowerPC platforms that is actually SMP, it makes a useful test platform. When I converted the sbc8548, I recall testing the 8641d but there was breakage in the DDR init caused by other (unknown) changes that prevented me from doing the conversion then and there. Mabye I'll get lucky and that issue will be resolved now.

So please hold on this for a short while longer.

Paul.
--

Quoted 1,105 lines
Quoted 1,105 lines

---

 arch/powerpc/cpu/mpc86xx/Kconfig |   4 -
 board/sbc8641d/Kconfig           |   9 -
 board/sbc8641d/MAINTAINERS       |   6 -
 board/sbc8641d/Makefile          |  10 -
 board/sbc8641d/README            |  28 --
 board/sbc8641d/ddr.c             |  56 ----
 board/sbc8641d/law.c             |  40 ---
 board/sbc8641d/sbc8641d.c        | 261 -----------------
 configs/sbc8641d_defconfig       |   4 -
 include/configs/sbc8641d.h       | 590 ---------------------------------------
 10 files changed, 1008 deletions(-)
 delete mode 100644 board/sbc8641d/Kconfig
 delete mode 100644 board/sbc8641d/MAINTAINERS
 delete mode 100644 board/sbc8641d/Makefile
 delete mode 100644 board/sbc8641d/README
 delete mode 100644 board/sbc8641d/ddr.c
 delete mode 100644 board/sbc8641d/law.c
 delete mode 100644 board/sbc8641d/sbc8641d.c
 delete mode 100644 configs/sbc8641d_defconfig
 delete mode 100644 include/configs/sbc8641d.h
arch/powerpc/cpu/mpc86xx/Kconfig +0 -4
index 46d15e2..0dcee70 100644
@@ -8,9 +8,6 @@ choice
 	prompt "Target select"
 	optional
 
-config TARGET_SBC8641D
-	bool "Support sbc8641d"
-
 config TARGET_MPC8641HPCN
 	bool "Support MPC8641HPCN"
 
@@ -20,7 +17,6 @@ config TARGET_XPEDITE517X
 endchoice
 
 source "board/freescale/mpc8641hpcn/Kconfig"
-source "board/sbc8641d/Kconfig"
 source "board/xes/xpedite517x/Kconfig"
 
 endmenu
board/sbc8641d/Kconfig deleted +0 -9
deleted file mode 100644
index 8dfc90c..0000000
@@ -1,9 +0,0 @@
-if TARGET_SBC8641D
-
-config SYS_BOARD
-	default "sbc8641d"
-
-config SYS_CONFIG_NAME
-	default "sbc8641d"
-
-endif
board/sbc8641d/MAINTAINERS deleted +0 -6
deleted file mode 100644
index a50b541..0000000
@@ -1,6 +0,0 @@
-SBC8641D BOARD
-M:	Paul Gortmaker <[email protected]>
-S:	Maintained
-F:	board/sbc8641d/
-F:	include/configs/sbc8641d.h
-F:	configs/sbc8641d_defconfig
board/sbc8641d/Makefile deleted +0 -10
deleted file mode 100644
index a9b2026..0000000
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= sbc8641d.o
-obj-y	+= law.o
-obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
board/sbc8641d/README deleted +0 -28
deleted file mode 100644
index a051466..0000000
@@ -1,28 +0,0 @@
-Wind River SBC8641D reference board
-===========================
-
-Created 06/14/2007 Joe Hamman
-Copyright 2007, Embedded Specialties, Inc.
-Copyright 2007 Wind River Systemes, Inc.
------------------------------
-
-1. Building U-Boot
-------------------
-The SBC8641D code is known to build using ELDK 4.1.
-
-    $ make sbc8641d_config
-    Configuring for sbc8641d board...
-
-    $ make
-
-
-2. Switch and Jumper Settings
------------------------------
-All Jumpers & Switches are in their default positions.  Please refer to
-the board documentation for details.  Some settings control CPU voltages
-and settings may change with board revisions.
-
-3. Known limitations
---------------------
-PCI:
-	The PCI command may hang if no boards are present in either slot.
board/sbc8641d/ddr.c deleted +0 -56
deleted file mode 100644
index b31ea34..0000000
@@ -1,56 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 7;
-
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
-	 */
-	popts->cpo_override = 10;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-}
board/sbc8641d/law.c deleted +0 -40
deleted file mode 100644
index c4e736b..0000000
@@ -1,40 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW (Local Access Window) configuration:
- *
- * 0x0000_0000	DDR			256M
- * 0x1000_0000	DDR2			256M
- * 0x8000_0000	PCIE1 MEM		512M
- * 0xa000_0000	PCIE2 MEM		512M
- * 0xc000_0000	RapidIO			512M
- * 0xe200_0000	PCIE1 IO		16M
- * 0xe300_0000	PCIE2 IO		16M
- * 0xf800_0000	CCSRBAR			2M
- * 0xfe00_0000	FLASH (boot bank)	32M
- *
- */
-
-
-struct law_entry law_table[] = {
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		 LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-#endif
-	SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
-	SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
board/sbc8641d/sbc8641d.c deleted +0 -261
deleted file mode 100644
index 6bdf1a2..0000000
@@ -1,261 +0,0 @@
-/*
- * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
- * Copyright 2007 Embedded Specialties, Inc.
- * Joe Hamman joe.hamman at embeddedspecialties.com
- *
- * Copyright 2004 Freescale Semiconductor.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan at freescale.com)
- *
- * (C) Copyright 2002 Scott McNutt <[email protected]>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_86xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-long int fixed_sdram (void);
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	puts ("Board: Wind River SBC8641D\n");
-
-	return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = fsl_ddr_sdram();
-#else
-	dram_size = fixed_sdram ();
-#endif
-
-	debug ("    DDR: ");
-	return dram_size;
-}
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
-	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
-	uint *p;
-
-	puts ("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts ("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	puts ("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-long int fixed_sdram (void)
-{
-#if !defined(CONFIG_SYS_RAMBOOT)
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile struct ccsr_ddr *ddr = &immap->im_ddr1;
-
-	ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
-	ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
-	ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS;
-	ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS;
-	ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
-	ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
-	ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG;
-	ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG;
-	ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
-	ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
-	ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
-	ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
-	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A;
-	ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
-	ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
-	ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
-	ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL;
-	ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
-	ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
-	ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
-
-	asm ("sync;isync");
-
-	udelay (500);
-
-	ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B;
-	asm ("sync; isync");
-
-	udelay (500);
-	ddr = &immap->im_ddr2;
-
-	ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
-	ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS;
-	ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS;
-	ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS;
-	ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG;
-	ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG;
-	ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG;
-	ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG;
-	ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH;
-	ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0;
-	ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1;
-	ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2;
-	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A;
-	ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
-	ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1;
-	ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
-	ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL;
-	ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
-	ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
-	ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
-
-	asm ("sync;isync");
-
-	udelay (500);
-
-	ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B;
-	asm ("sync; isync");
-
-	udelay (500);
-#endif
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-}
-#endif				/* !defined(CONFIG_SPD_EEPROM) */
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-#endif /* CONFIG_PCI */
-
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	FT_FSL_PCI_SETUP;
-
-	return 0;
-}
-#endif
-
-void sbc8641d_reset_board (void)
-{
-	puts ("Resetting board....\n");
-}
-
-/*
- * get_board_sys_clk
- *      Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ
- */
-
-unsigned long get_board_sys_clk (ulong dummy)
-{
-	int i;
-	ulong val = 0;
-
-	i = 5;
-	i &= 0x07;
-
-	switch (i) {
-	case 0:
-		val = 33000000;
-		break;
-	case 1:
-		val = 40000000;
-		break;
-	case 2:
-		val = 50000000;
-		break;
-	case 3:
-		val = 66000000;
-		break;
-	case 4:
-		val = 83000000;
-		break;
-	case 5:
-		val = 100000000;
-		break;
-	case 6:
-		val = 134000000;
-		break;
-	case 7:
-		val = 166000000;
-		break;
-	}
-
-	return val;
-}
-
-void board_reset(void)
-{
-#ifdef CONFIG_SYS_RESET_ADDRESS
-	ulong addr = CONFIG_SYS_RESET_ADDRESS;
-
-	/* flush and disable I/D cache */
-	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
-	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
-	__asm__ __volatile__ ("ori	4, 3, 0xc00"	::: "r4");
-	__asm__ __volatile__ ("andc	5, 3, 5"	::: "r5");
-	__asm__ __volatile__ ("sync");
-	__asm__ __volatile__ ("mtspr	1008, 4");
-	__asm__ __volatile__ ("isync");
-	__asm__ __volatile__ ("sync");
-	__asm__ __volatile__ ("mtspr	1008, 5");
-	__asm__ __volatile__ ("isync");
-	__asm__ __volatile__ ("sync");
-
-	/*
-	 * SRR0 has system reset vector, SRR1 has default MSR value
-	 * rfi restores MSR from SRR1 and sets the PC to the SRR0 value
-	 */
-	__asm__ __volatile__ ("mtspr	26, %0"		:: "r" (addr));
-	__asm__ __volatile__ ("li	4, (1 << 6)"	::: "r4");
-	__asm__ __volatile__ ("mtspr	27, 4");
-	__asm__ __volatile__ ("rfi");
-#endif
-}
configs/sbc8641d_defconfig deleted +0 -4
deleted file mode 100644
index b67c7c0..0000000
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC86xx=y
-CONFIG_TARGET_SBC8641D=y
-# CONFIG_CMD_SETEXPR is not set
include/configs/sbc8641d.h deleted +0 -590
deleted file mode 100644
index 00aab6b..0000000
@@ -1,590 +0,0 @@
-/*
- * Copyright 2007 Wind River Systems <www.windriver.com>
- * Copyright 2007 Embedded Specialties, Inc.
- * Joe Hamman <[email protected]>
- *
- * Copyright 2006 Freescale Semiconductor.
- *
- * Srikanth Srinivasan (srikanth.srinivasan at freescale.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * SBC8641D board configuration file
- *
- * Make sure you change the MAC address and other network params first,
- * search for CONFIG_SERVERIP, etc in this file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High Level Configuration Options */
-#define CONFIG_MPC8641		1	/* MPC8641 specific */
-#define CONFIG_SBC8641D		1	/* SBC8641D board specific */
-#define CONFIG_MP		1	/* support multiple processors */
-#define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#ifdef RUN_DIAG
-#define CONFIG_SYS_DIAG_ADDR        0xff800000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS    0xfff00100
-
-/*
- * virtual address to be used for temporary mappings.  There
- * should be 128k free at this VA.
- */
-#define CONFIG_SYS_SCRATCH_VA	0xe8000000
-
-#define CONFIG_SYS_SRIO
-#define CONFIG_SRIO1			/* SRIO port 1 */
-
-#define CONFIG_PCI		1	/* Enable PCIE */
-#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
-#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE 1	/* indirect PCI bridge support */
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
-#define CONFIG_TSEC_ENET		/* tsec ethernet support */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAT_RW		1	/* Use common BAT rw code */
-#define CONFIG_HIGH_BATS	1	/* High BATs supported and enabled */
-
-#undef CONFIG_SPD_EEPROM		/* Do not use SPD EEPROM for DDR setup*/
-#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
-#define CONFIG_NUM_DDR_CONTROLLERS     2
-#define CACHE_LINE_INTERLEAVING		0x20000000
-#define PAGE_INTERLEAVING		0x21000000
-#define BANK_INTERLEAVING		0x22000000
-#define SUPER_BANK_INTERLEAVING		0x23000000
-
-
-#define CONFIG_ALTIVEC          1
-
-/*
- * L2CR setup -- make sure this is right for your board!
- */
-#define CONFIG_SYS_L2
-#define L2_INIT		0
-#define L2_ENABLE	(L2CR_L2E)
-
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
-
-#undef	CONFIG_SYS_DRAM_TEST				/* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR		0xf8000000	/* relocated CCSRBAR */
-#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR	/* PQII uses CONFIG_SYS_IMMR */
-
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
-#define CONFIG_SYS_CCSRBAR_PHYS_HIGH	0x0
-#define CONFIG_SYS_CCSRBAR_PHYS		CONFIG_SYS_CCSRBAR_PHYS_LOW
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory */
-#define CONFIG_SYS_DDR_SDRAM_BASE2	0x10000000	/* DDR bank 2 */
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_BASE2		CONFIG_SYS_DDR_SDRAM_BASE2
-#define CONFIG_SYS_MAX_DDR_BAT_SIZE	0x80000000	/* BAT mapping size */
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS	2
-#define CONFIG_DIMM_SLOTS_PER_CTLR	2
-#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-#if defined(CONFIG_SPD_EEPROM)
-    /*
-     * Determine DDR configuration from I2C interface.
-     */
-    #define SPD_EEPROM_ADDRESS1		0x51		/* DDR DIMM */
-    #define SPD_EEPROM_ADDRESS2		0x52		/* DDR DIMM */
-    #define SPD_EEPROM_ADDRESS3		0x53		/* DDR DIMM */
-    #define SPD_EEPROM_ADDRESS4		0x54		/* DDR DIMM */
-
-#else
-    /*
-     * Manually set up DDR1 & DDR2 parameters
-     */
-
-    #define CONFIG_SYS_SDRAM_SIZE	512		/* DDR is 512MB */
-
-    #define CONFIG_SYS_DDR_CS0_BNDS	0x0000000F
-    #define CONFIG_SYS_DDR_CS1_BNDS	0x00000000
-    #define CONFIG_SYS_DDR_CS2_BNDS	0x00000000
-    #define CONFIG_SYS_DDR_CS3_BNDS	0x00000000
-    #define CONFIG_SYS_DDR_CS0_CONFIG	0x80010102
-    #define CONFIG_SYS_DDR_CS1_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR_CS2_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR_CS3_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR_TIMING_3 0x00000000
-    #define CONFIG_SYS_DDR_TIMING_0	0x00220802
-    #define CONFIG_SYS_DDR_TIMING_1	0x38377322
-    #define CONFIG_SYS_DDR_TIMING_2	0x002040c7
-    #define CONFIG_SYS_DDR_CFG_1A	0x43008008
-    #define CONFIG_SYS_DDR_CFG_2	0x24401000
-    #define CONFIG_SYS_DDR_MODE_1	0x23c00542
-    #define CONFIG_SYS_DDR_MODE_2	0x00000000
-    #define CONFIG_SYS_DDR_MODE_CTL	0x00000000
-    #define CONFIG_SYS_DDR_INTERVAL	0x05080100
-    #define CONFIG_SYS_DDR_DATA_INIT	0x00000000
-    #define CONFIG_SYS_DDR_CLK_CTRL	0x03800000
-    #define CONFIG_SYS_DDR_CFG_1B	0xC3008008
-
-    #define CONFIG_SYS_DDR2_CS0_BNDS	0x0010001F
-    #define CONFIG_SYS_DDR2_CS1_BNDS	0x00000000
-    #define CONFIG_SYS_DDR2_CS2_BNDS	0x00000000
-    #define CONFIG_SYS_DDR2_CS3_BNDS	0x00000000
-    #define CONFIG_SYS_DDR2_CS0_CONFIG	0x80010102
-    #define CONFIG_SYS_DDR2_CS1_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR2_CS2_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR2_CS3_CONFIG	0x00000000
-    #define CONFIG_SYS_DDR2_EXT_REFRESH 0x00000000
-    #define CONFIG_SYS_DDR2_TIMING_0	0x00220802
-    #define CONFIG_SYS_DDR2_TIMING_1	0x38377322
-    #define CONFIG_SYS_DDR2_TIMING_2	0x002040c7
-    #define CONFIG_SYS_DDR2_CFG_1A	0x43008008
-    #define CONFIG_SYS_DDR2_CFG_2	0x24401000
-    #define CONFIG_SYS_DDR2_MODE_1	0x23c00542
-    #define CONFIG_SYS_DDR2_MODE_2	0x00000000
-    #define CONFIG_SYS_DDR2_MODE_CTL	0x00000000
-    #define CONFIG_SYS_DDR2_INTERVAL	0x05080100
-    #define CONFIG_SYS_DDR2_DATA_INIT	0x00000000
-    #define CONFIG_SYS_DDR2_CLK_CTRL	0x03800000
-    #define CONFIG_SYS_DDR2_CFG_1B	0xC3008008
-
-
-#endif
-
-/* #define CONFIG_ID_EEPROM	1
-#define ID_EEPROM_ADDR 0x57 */
-
-/*
- * The SBC8641D contains 16MB flash space at ff000000.
- */
-#define CONFIG_SYS_FLASH_BASE      0xff000000  /* start of FLASH 16M */
-
-/* Flash */
-#define CONFIG_SYS_BR0_PRELIM		0xff001001	/* port size 16bit */
-#define CONFIG_SYS_OR0_PRELIM		0xff006e65	/* 16MB Boot Flash area */
-
-/* 64KB EEPROM */
-#define CONFIG_SYS_BR1_PRELIM		0xf0000801	/* port size 16bit */
-#define CONFIG_SYS_OR1_PRELIM		0xffff6e65	/* 64K EEPROM area */
-
-/* EPLD - User switches, board id, LEDs */
-#define CONFIG_SYS_BR2_PRELIM		0xf1000801	/* port size 16bit */
-#define CONFIG_SYS_OR2_PRELIM		0xfff06e65	/* EPLD (switches, board ID, LEDs) area */
-
-/* Local bus SDRAM 128MB */
-#define CONFIG_SYS_BR3_PRELIM		0xe0001861	/* port size ?bit */
-#define CONFIG_SYS_OR3_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (1st half) */
-#define CONFIG_SYS_BR4_PRELIM		0xe4001861	/* port size ?bit */
-#define CONFIG_SYS_OR4_PRELIM		0xfc006cc0	/* 128MB local bus SDRAM area (2nd half) */
-
-/* Disk on Chip (DOC) 128MB */
-#define CONFIG_SYS_BR5_PRELIM		0xe8001001	/* port size ?bit */
-#define CONFIG_SYS_OR5_PRELIM		0xf8006e65	/* 128MB local bus SDRAM area (2nd half) */
-
-/* LCD */
-#define CONFIG_SYS_BR6_PRELIM		0xf4000801	/* port size ?bit */
-#define CONFIG_SYS_OR6_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */
-
-/* Control logic & misc peripherals */
-#define CONFIG_SYS_BR7_PRELIM		0xf2000801	/* port size ?bit */
-#define CONFIG_SYS_OR7_PRELIM		0xfff06e65	/* 128MB local bus SDRAM area (2nd half) */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	131		/* sectors per device */
-
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
-#define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000	/* early monitor loc */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_WRITE_SWAPPED_DATA
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_PROTECTION
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#ifndef CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR	0xf8400000	/* Initial RAM address */
-#endif
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)    /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)    /* Reserved for malloc */
-
-/* Serial Port */
-#define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
-
-/*
- * Pass open firmware flat tree to kernel
- */
-#define CONFIG_OF_LIBFDT		1
-#define CONFIG_OF_BOARD_SETUP		1
-#define CONFIG_OF_STDOUT_VIA_ALIAS	1
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x69} }
-
-/*
- * RapidIO MMU
- */
-#define CONFIG_SYS_SRIO1_MEM_BASE	0xc0000000	/* base address */
-#define CONFIG_SYS_SRIO1_MEM_PHYS	CONFIG_SYS_SRIO1_MEM_BASE
-#define CONFIG_SYS_SRIO1_MEM_SIZE	0x20000000	/* 128M */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	CONFIG_SYS_PCIE1_MEM_BUS
-#define CONFIG_SYS_PCIE1_MEM_VIRT	CONFIG_SYS_PCIE1_MEM_BUS
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS		0xe2000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	CONFIG_SYS_PCIE1_IO_BUS
-#define CONFIG_SYS_PCIE1_IO_VIRT	CONFIG_SYS_PCIE1_IO_BUS
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x1000000	/* 16M */
-
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	CONFIG_SYS_PCIE2_MEM_BUS
-#define CONFIG_SYS_PCIE2_MEM_VIRT	CONFIG_SYS_PCIE2_MEM_BUS
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000	/* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS		0xe3000000
-#define CONFIG_SYS_PCIE2_IO_PHYS	CONFIG_SYS_PCIE2_IO_BUS
-#define CONFIG_SYS_PCIE2_IO_VIRT	CONFIG_SYS_PCIE2_IO_BUS
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x1000000	/* 16M */
-
-#if defined(CONFIG_PCI)
-
-#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
-
-#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
-
-#define CONFIG_PCI_PNP			/* do pci plug-and-play */
-
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
-
-#if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR	0xe0000000
-    #define PCI_ENET0_MEMADDR	0xe0000000
-    #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-
-#define CONFIG_DOS_PARTITION
-#undef CONFIG_SCSI_AHCI
-
-#ifdef CONFIG_SCSI_AHCI
-#define CONFIG_SATA_ULI5288
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	4
-#define CONFIG_SYS_SCSI_MAX_LUN	1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SYS_SCSI_MAXDEVICE	CONFIG_SYS_SCSI_MAX_DEVICE
-#endif
-
-#endif	/* CONFIG_PCI */
-
-#if defined(CONFIG_TSEC_ENET)
-
-/* #define CONFIG_MII		1 */	/* MII PHY management */
-
-#define CONFIG_TSEC1    1
-#define CONFIG_TSEC1_NAME       "eTSEC1"
-#define CONFIG_TSEC2    1
-#define CONFIG_TSEC2_NAME       "eTSEC2"
-#define CONFIG_TSEC3    1
-#define CONFIG_TSEC3_NAME       "eTSEC3"
-#define CONFIG_TSEC4    1
-#define CONFIG_TSEC4_NAME       "eTSEC4"
-
-#define TSEC1_PHY_ADDR		0x1F
-#define TSEC2_PHY_ADDR		0x00
-#define TSEC3_PHY_ADDR		0x01
-#define TSEC4_PHY_ADDR		0x02
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC3_PHYIDX		0
-#define TSEC4_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-#define TSEC3_FLAGS		TSEC_GIGABIT
-#define TSEC4_FLAGS		TSEC_GIGABIT
-
-#define CONFIG_SYS_TBIPA_VALUE	0x1e	/* Set TBI address not to conflict with TSEC1_PHY_ADDR */
-
-#define CONFIG_ETHPRIME		"eTSEC1"
-
-#endif	/* CONFIG_TSEC_ENET */
-
-/*
- * BAT0         2G     Cacheable, non-guarded
- * 0x0000_0000  2G     DDR
- */
-#define CONFIG_SYS_DBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT0U	(BATU_BL_2G | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT0L	(BATL_PP_RW | BATL_MEMCOHERENCE )
-#define CONFIG_SYS_IBAT0U	CONFIG_SYS_DBAT0U
-
-/*
- * BAT1         1G     Cache-inhibited, guarded
- * 0x8000_0000  512M   PCI-Express 1 Memory
- * 0xa000_0000  512M   PCI-Express 2 Memory
- *	Changed it for operating from 0xd0000000
- */
-#define CONFIG_SYS_DBAT1L	( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U	(CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U	CONFIG_SYS_DBAT1U
-
-/*
- * BAT2         512M   Cache-inhibited, guarded
- * 0xc000_0000  512M   RapidIO Memory
- */
-#define CONFIG_SYS_DBAT2L	(CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U	(CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
-
-/*
- * BAT3         4M     Cache-inhibited, guarded
- * 0xf800_0000  4M     CCSR
- */
-#define CONFIG_SYS_DBAT3L	( CONFIG_SYS_CCSRBAR | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U	(CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U	CONFIG_SYS_DBAT3U
-
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
-#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
-				       | BATL_PP_RW | BATL_CACHEINHIBIT \
-				       | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
-				       | BATU_BL_1M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
-				       | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
-#endif
-
-/*
- * BAT4         32M    Cache-inhibited, guarded
- * 0xe200_0000  16M    PCI-Express 1 I/O
- * 0xe300_0000  16M    PCI-Express 2 I/0
- *    Note that this is at 0xe0000000
- */
-#define CONFIG_SYS_DBAT4L	( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
-
-/*
- * BAT5         128K   Cacheable, non-guarded
- * 0xe401_0000  128K   Init RAM for stack in the CPU DCache (no backing memory)
- */
-#define CONFIG_SYS_DBAT5L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT5U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT5L	CONFIG_SYS_DBAT5L
-#define CONFIG_SYS_IBAT5U	CONFIG_SYS_DBAT5U
-
-/*
- * BAT6         32M    Cache-inhibited, guarded
- * 0xfe00_0000  32M    FLASH
- */
-#define CONFIG_SYS_DBAT6L	((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
-			| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U	((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT6L	((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U	CONFIG_SYS_DBAT6U
-
-/* Map the last 1M of flash where we're running from reset */
-#define CONFIG_SYS_DBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
-				 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U_EARLY	(CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT6L_EARLY	(CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
-				 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U_EARLY	CONFIG_SYS_DBAT6U_EARLY
-
-#define CONFIG_SYS_DBAT7L	0x00000000
-#define CONFIG_SYS_DBAT7U	0x00000000
-#define CONFIG_SYS_IBAT7L	0x00000000
-#define CONFIG_SYS_IBAT7U	0x00000000
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-#define CONFIG_ENV_SIZE		0x2000
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-#if defined(CONFIG_CMD_KGDB)
-    #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
-#else
-    #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
-
-/* Cache Configuration */
-#define CONFIG_SYS_DCACHE_SIZE		32768
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_HAS_ETH0		1
-#define CONFIG_HAS_ETH1		1
-#define CONFIG_HAS_ETH2		1
-#define CONFIG_HAS_ETH3		1
-
-#define CONFIG_IPADDR		192.168.0.50
-
-#define CONFIG_HOSTNAME		sbc8641d
-#define CONFIG_ROOTPATH		"/opt/eldk/ppc_74xx"
-#define CONFIG_BOOTFILE		"uImage"
-
-#define CONFIG_SERVERIP		192.168.0.2
-#define CONFIG_GATEWAYIP	192.168.0.1
-#define CONFIG_NETMASK		255.255.255.0
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
-#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE	115200
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-   "netdev=eth0\0"							\
-   "consoledev=ttyS0\0"							\
-   "ramdiskaddr=2000000\0"						\
-   "ramdiskfile=uRamdisk\0"						\
-   "dtbaddr=400000\0"							\
-   "dtbfile=sbc8641d.dtb\0"						\
-   "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0"	\
-   "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0"	\
-   "maxcpus=1"
-
-#define CONFIG_NFSBOOTCOMMAND						\
-   "setenv bootargs root=/dev/nfs rw "					\
-      "nfsroot=$serverip:$rootpath "					\
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $dtbaddr $dtbfile;"						\
-   "bootm $loadaddr - $dtbaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-   "setenv bootargs root=/dev/ram rw "					\
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "tftp $ramdiskaddr $ramdiskfile;"					\
-   "tftp $loadaddr $bootfile;"						\
-   "tftp $dtbaddr $dtbfile;"						\
-   "bootm $loadaddr $ramdiskaddr $dtbaddr"
-
-#define CONFIG_FLASHBOOTCOMMAND						\
-   "setenv bootargs root=/dev/ram rw "					\
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "	\
-      "console=$consoledev,$baudrate $othbootargs;"			\
-   "bootm ffd00000 ffb00000 ffa00000"
-
-#define CONFIG_BOOTCOMMAND  CONFIG_FLASHBOOTCOMMAND
-
-#endif	/* __CONFIG_H */
#37 lore raw

cover Janitorial: powerpc: remove PowerPC non-generic boards

In reply to Masahiro Yamada
Quoted 12 lines · Masahiro Yamada

PowerPC supports generic board framework, so all the PowerPC boards should be converted(, otherwise removed).

This is docmented in doc/README.generic-board, was announced in the ML again and again, and warning messages have been displayed when such boards are built.

This series clears away all non-generic boards from PowerPC arch.

I am sending it as RFC to give the board maintainers some time to take appropriate action to keep the board support.

Quoted 8 lines

If you want to keep them, please convert your board to Generic Board (with run-test) and send a patch in two weeks.

This is the _last_ call.
If you do not respend to this seris, it will be too late.

I will send a non-RFC series at the end of August to really delete boards that nobody would take any action.

And I intend to take up that non-RFC series shortly after it's posted. Anything after that point can be brought back from the graveyard rather than still being in-tree. Thanks Masahiro!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150813/2553a21a/attachment.sig>

#38 lore raw

cover Janitorial: powerpc: remove PowerPC non-generic boards

Hi Masahiro,

Quoted 20 lines · Tom Rini
Quoted 18 lines · Masahiro Yamada

PowerPC supports generic board framework, so all the PowerPC boards should be converted(, otherwise removed).

This is docmented in doc/README.generic-board, was announced in the ML again and again, and warning messages have been displayed when such boards are built.

This series clears away all non-generic boards from PowerPC arch.

I am sending it as RFC to give the board maintainers some time to take appropriate action to keep the board support.

If you want to keep them, please convert your board to Generic Board (with run-test) and send a patch in two weeks.

This is the _last_ call.
If you do not respend to this seris, it will be too late.

Quoted 6 lines
Quoted 2 lines

I will send a non-RFC series at the end of August to really delete boards that nobody would take any action.

And I intend to take up that non-RFC series shortly after it's posted. Anything after that point can be brought back from the graveyard rather than still being in-tree. Thanks Masahiro!

Thanks Masahiro for taking on this valuable work.

Regards,
Simon