Skip to contentSkip to conversation

arm: socfpga: Enable saveenv for SD/MMC

PATCH New dinguyen at opensource.altera.com 2 participants 2 messages Sep 23, 2015 – Sep 24, 2015

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 arm: socfpga: Enable saveenv for SD/MMC

From: Dinh Nguyen <[email protected]>

Enable the able to save the environment variables when SD/MMC is used.

---
v4: Move ENV_IS_NOWHERE to the mcvevk board config file
v3: Only define ENV_IS_NOWHERE if env is not in MMC, NAND, FAT, and SPI_FLASH
v2: Move this option to be on a per-board basis
Add config for socfpga_cyclone5 and socfpga_arria5

---
 include/configs/socfpga_arria5_socdk.h   | 4 ++++
 include/configs/socfpga_common.h         | 1 -
 include/configs/socfpga_cyclone5_socdk.h | 4 ++++
 include/configs/socfpga_de0_nano_soc.h   | 4 ++++
 include/configs/socfpga_mcvevk.h         | 2 ++
 include/configs/socfpga_sockit.h         | 4 ++++
 6 files changed, 18 insertions(+), 1 deletion(-)
include/configs/socfpga_arria5_socdk.h +4 -0
index 3193684..b75b0a2 100644
@@ -59,6 +59,10 @@
 
 #endif
 
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
+#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
+
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
include/configs/socfpga_common.h +0 -1
index a2811ba..cece095 100644
@@ -281,7 +281,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE			4096
 
 /*
include/configs/socfpga_cyclone5_socdk.h +4 -0
index 9e733e5..fa67b25 100644
@@ -59,6 +59,10 @@
 
 #endif
 
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
+#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
+
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
include/configs/socfpga_de0_nano_soc.h +4 -0
index 2508d03..191e1f7 100644
@@ -55,6 +55,10 @@
 
 #endif
 
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
+#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
+
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
include/configs/socfpga_mcvevk.h +2 -0
index c5b4b4c..ed9b5cc 100644
@@ -43,6 +43,8 @@
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
+#define CONFIG_ENV_IS_NOWHERE
+
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
include/configs/socfpga_sockit.h +4 -0
index 747e988..6c71ef4 100644
@@ -59,6 +59,10 @@
 
 #endif
 
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0	/* device 0 */
+#define CONFIG_ENV_OFFSET		512	/* just after the MBR */
+
 /* USB */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
Signature · 1 line
2.4.5
Applied
#1 lore raw

PATCH v4 1/1 arm: socfpga: Enable saveenv for SD/MMC

Quoted 5 lines · dinguyen at opensource.altera.com

From: Dinh Nguyen <[email protected]>

Enable the able to save the environment variables when SD/MMC is used.

Applied, thanks!

Best regards,
Marek Vasut