i915: issues with Skylake integrated graphics
Hi,
I am testing Linux v4.3-rc6 on a laptop with Intel 'Skylake' integrated graphics. The integrated display works, but I noticed several warnings in the kernel log, and a VGA monitor attached to the HDMI input via a VGA->HDMI adapter did not work. Furthermore, the system hung for several seconds during boot. The two WARNs were:
[ 1.078097] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/i915/intel_pm.c:3321 skl_update_pipe_wm+0x7fa/0x810() [ 1.078097] WARN_ON(p->pixel_rate == 0) ... [ 1.353670] WARNING: CPU: 1 PID: 6 at drivers/gpu/drm/i915/intel_dp.c:854 intel_dp_aux_ch+0x10f/0x6a0() [ 1.353670] dp_aux_ch not started status 0xad40001f
The following error was reported later, when the HDMI input was connected but the driver failed to report the input as connected:
[ 52.553940] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130
I have attached the full 'dmesg' output for anyone who may find it useful.
Eric
Quoted 10 lines · Eric Biggers
Hi,
I am testing Linux v4.3-rc6 on a laptop with Intel 'Skylake' integrated graphics. The integrated display works, but I noticed several warnings in the kernel log, and a VGA monitor attached to the HDMI input via a
VGA->HDMIadapter did not work. Furthermore, the system hung for several seconds during boot. The two WARNs were:[ 1.078097] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/i915/intel_pm.c:3321 skl_update_pipe_wm+0x7fa/0x810() [ 1.078097] WARN_ON(p->pixel_rate == 0)
Please file two separate bugs at [1], one for the above, and another for the below. Please add drm.debug=14 module parameter, and attach dmesg all the way from boot to the problem.
Thanks,
Jani.
[1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel
Quoted 16 lines
...
[ 1.353670] WARNING: CPU: 1 PID: 6 at drivers/gpu/drm/i915/intel_dp.c:854 intel_dp_aux_ch+0x10f/0x6a0() [ 1.353670] dp_aux_ch not started status 0xad40001fThe following error was reported later, when the HDMI input was connected but the driver failed to report the input as connected:
[ 52.553940] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130I have attached the full 'dmesg' output for anyone who may find it useful.
Eric
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 3 lines · Jani Nikula
Please file two separate bugs at [1], one for the above, and another for the below. Please add drm.debug=14 module parameter, and attach dmesg all the way from boot to the problem.
I have filed https://bugs.freedesktop.org/show_bug.cgi?id=92685 for the second part. I did not, however, re-experience the first warning (the "WARN_ON(p->pixel_rate == 0)") after upgrading to Linux v4.3-rc7 and rebooting several times.
Eric
Quoted 9 lines · Eric Biggers
Quoted 3 lines · Jani Nikula
Please file two separate bugs at [1], one for the above, and another for the below. Please add drm.debug=14 module parameter, and attach dmesg all the way from boot to the problem.
I have filed https://bugs.freedesktop.org/show_bug.cgi?id=92685 for the second part. I did not, however, re-experience the first warning (the "
WARN_ON(p->pixel_rate == 0)") after upgrading to Linux v4.3-rc7 and rebooting several times.
Thanks for the report.
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel