Skip to contentSkip to conversation

i915: issues with Skylake integrated graphics

Linux v4.3-rc6 Eric Biggers 2 participants 4 messages Oct 23, 2015 – Oct 27, 2015

lore
Share & tools
lore
#0 lore raw

Hi,

I am testing Linux v4.3-rc6 on a laptop with Intel 'Skylake' integrated graphics. The integrated display works, but I noticed several warnings in the kernel log, and a VGA monitor attached to the HDMI input via a VGA->HDMI adapter did not work. Furthermore, the system hung for several seconds during boot. The two WARNs were:

[    1.078097] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/i915/intel_pm.c:3321 skl_update_pipe_wm+0x7fa/0x810()
[    1.078097] WARN_ON(p->pixel_rate == 0)
...
[    1.353670] WARNING: CPU: 1 PID: 6 at drivers/gpu/drm/i915/intel_dp.c:854 intel_dp_aux_ch+0x10f/0x6a0()
[    1.353670] dp_aux_ch not started status 0xad40001f

The following error was reported later, when the HDMI input was connected but the driver failed to report the input as connected:

[   52.553940] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130

I have attached the full 'dmesg' output for anyone who may find it useful.

Eric

#1 lore raw
Quoted 10 lines · Eric Biggers

Hi,

I am testing Linux v4.3-rc6 on a laptop with Intel 'Skylake' integrated graphics. The integrated display works, but I noticed several warnings in the kernel log, and a VGA monitor attached to the HDMI input via a VGA->HDMI adapter did not work. Furthermore, the system hung for several seconds during boot. The two WARNs were:

[    1.078097] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/i915/intel_pm.c:3321 skl_update_pipe_wm+0x7fa/0x810()
[    1.078097] WARN_ON(p->pixel_rate == 0)

Please file two separate bugs at [1], one for the above, and another for the below. Please add drm.debug=14 module parameter, and attach dmesg all the way from boot to the problem.

Thanks,
Jani.

[1] https://bugs.freedesktop.org/enter_bug.cgi?product=DRI&component=DRM/Intel

Quoted 16 lines

...

[    1.353670] WARNING: CPU: 1 PID: 6 at drivers/gpu/drm/i915/intel_dp.c:854 intel_dp_aux_ch+0x10f/0x6a0()
[    1.353670] dp_aux_ch not started status 0xad40001f

The following error was reported later, when the HDMI input was connected but the driver failed to report the input as connected:

[   52.553940] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 130

I have attached the full 'dmesg' output for anyone who may find it useful.

Eric
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw
Quoted 3 lines · Jani Nikula

Please file two separate bugs at [1], one for the above, and another for the below. Please add drm.debug=14 module parameter, and attach dmesg all the way from boot to the problem.

I have filed https://bugs.freedesktop.org/show_bug.cgi?id=92685 for the second part. I did not, however, re-experience the first warning (the "WARN_ON(p->pixel_rate == 0)") after upgrading to Linux v4.3-rc7 and rebooting several times.

Eric

#3 lore raw
Quoted 9 lines · Eric Biggers
Quoted 3 lines · Jani Nikula

Please file two separate bugs at [1], one for the above, and another for the below. Please add drm.debug=14 module parameter, and attach dmesg all the way from boot to the problem.

I have filed https://bugs.freedesktop.org/show_bug.cgi?id=92685 for the second part. I did not, however, re-experience the first warning (the "WARN_ON(p->pixel_rate == 0)") after upgrading to Linux v4.3-rc7 and rebooting several times.

Thanks for the report.

BR,
Jani.

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel