First set of iio fixes for the 4.4 cycle.
Jonathan Cameron
maintainerThe following changes since commit b94e22805a2224061bb263a82b72e09544a5fbb3:
iio: mxs-lradc: Fix temperature offset (2015-10-11 15:02:02 +0100)
are available in the git repository at:
ssh://[email protected]/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-4.4a
for you to fetch changes up to a57f8dac46fbac5ab0e31aef1a98b3f6eb30c079:
iio: adc: xilinx: Fix VREFN scale (2015-11-15 12:36:20 +0000)
----------------------------------------------------------------
First set of IIO fixes for the 4.4 cycle.
This set does not include those for issues introduced during the merge window. Fixes of those will follow in a future series.
* ad5064
- Make sure the local i2c_write returns 0 on success rather than the number of bytes transfered. Otherwise we report an error on all writes.
- Fix a shift for ad5629 and ad5669 which gives incorrect DAC output on these parts.
* ad7793
- The product ID on the datasheet is wrong. Fix it in the driver.
* IIO_DUMMY_EVGEN
- select IRQ_WORK as a dependency.
* lpc32xx
- make sure clock is prepared before enabling.
* si7020
- data byte order was reversed. Fix it.
* vf610
- Internal temperature calculation was wrong if a different reference voltage was used. Now use a linear interpolation function to make it work over the full range.
- Fix a division by zero in the case of a device tree property not being present (same issue two fixes).
* xilinx XADC
- VREFN scale was wrong - fix it.
----------------------------------------------------------------
Arnd Bergmann (1):
staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
Bhuvanchandra DV (1):
vf610_adc: Fix internal temperature calculation
Chris Lesiak (1):
iio: si7020: Swap data byte order
Lars-Peter Clausen (2):
iio: ad5064: Fix ad5629/ad5669 shift
iio:ad7793: Fix ad7785 product IDMichael Hennerich (1):
iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success
Sanchayan Maity (1):
iio: adc: vf610_adc: Fix division by zero error
Thomas Betker (1):
iio: adc: xilinx: Fix VREFN scale
Vladimir Zapolskiy (1):
iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock
drivers/iio/adc/ad7793.c | 2 +- drivers/iio/adc/vf610_adc.c | 22 ++++++--- drivers/iio/adc/xilinx-xadc-core.c | 1 + drivers/iio/dac/ad5064.c | 91 ++++++++++++++++++++++++----------- drivers/iio/humidity/si7020.c | 8 +-- drivers/staging/iio/Kconfig | 3 +- drivers/staging/iio/adc/lpc32xx_adc.c | 4 +- 7 files changed, 90 insertions(+), 41 deletions(-)
Quoted 7 lines · Jonathan Cameron
The following changes since commit
b94e22805a2224061bb263a82b72e09544a5fbb3:iio: mxs-lradc: Fix temperature offset (2015-10-11 15:02:02 +0100)
are available in the git repository at:
ssh://[email protected]/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-4.4a
Now pulled and pushed out, thanks.
greg k-h