Skip to contentSkip to conversation

First set of iio fixes for the 4.4 cycle.

GIT PULL Jonathan Cameron 2 participants 2 messages Nov 15, 2015 – Nov 18, 2015 IIO

lore
Share & tools
lore

Jonathan Cameron

author maintainer
#0 lore raw

The following changes since commit b94e22805a2224061bb263a82b72e09544a5fbb3:

iio: mxs-lradc: Fix temperature offset (2015-10-11 15:02:02 +0100)

are available in the git repository at:

ssh://[email protected]/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-4.4a

for you to fetch changes up to a57f8dac46fbac5ab0e31aef1a98b3f6eb30c079:

iio: adc: xilinx: Fix VREFN scale (2015-11-15 12:36:20 +0000)

----------------------------------------------------------------
First set of IIO fixes for the 4.4 cycle.

This set does not include those for issues introduced during the merge window. Fixes of those will follow in a future series.

* ad5064
- Make sure the local i2c_write returns 0 on success rather than the number of bytes transfered. Otherwise we report an error on all writes.
- Fix a shift for ad5629 and ad5669 which gives incorrect DAC output on these parts.
* ad7793
- The product ID on the datasheet is wrong. Fix it in the driver.
* IIO_DUMMY_EVGEN
- select IRQ_WORK as a dependency.
* lpc32xx
- make sure clock is prepared before enabling.
* si7020
- data byte order was reversed. Fix it.
* vf610
- Internal temperature calculation was wrong if a different reference voltage was used. Now use a linear interpolation function to make it work over the full range.
- Fix a division by zero in the case of a device tree property not being present (same issue two fixes).
* xilinx XADC
- VREFN scale was wrong - fix it.

----------------------------------------------------------------
Arnd Bergmann (1):
staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN

Bhuvanchandra DV (1):
vf610_adc: Fix internal temperature calculation

Chris Lesiak (1):
iio: si7020: Swap data byte order

Lars-Peter Clausen (2):

      iio: ad5064: Fix ad5629/ad5669 shift
      iio:ad7793: Fix ad7785 product ID

Michael Hennerich (1):

      iio:ad5064: Make sure ad5064_i2c_write() returns 0 on success

Sanchayan Maity (1):
iio: adc: vf610_adc: Fix division by zero error

Thomas Betker (1):
iio: adc: xilinx: Fix VREFN scale

Vladimir Zapolskiy (1):
iio: lpc32xx_adc: fix warnings caused by enabling unprepared clock

 drivers/iio/adc/ad7793.c              |  2 +-
 drivers/iio/adc/vf610_adc.c           | 22 ++++++---
 drivers/iio/adc/xilinx-xadc-core.c    |  1 +
 drivers/iio/dac/ad5064.c              | 91 ++++++++++++++++++++++++-----------
 drivers/iio/humidity/si7020.c         |  8 +--
 drivers/staging/iio/Kconfig           |  3 +-
 drivers/staging/iio/adc/lpc32xx_adc.c |  4 +-
 7 files changed, 90 insertions(+), 41 deletions(-)
#1 lore raw
Quoted 7 lines · Jonathan Cameron

The following changes since commit b94e22805a2224061bb263a82b72e09544a5fbb3:

iio: mxs-lradc: Fix temperature offset (2015-10-11 15:02:02 +0100)

are available in the git repository at:

ssh://[email protected]/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-for-4.4a

Now pulled and pushed out, thanks.

greg k-h