Skip to contentSkip to conversation

ARM: mvebu: update v5 defconfig

PATCH New Linus Walleij 3 participants 7 messages Nov 25, 2015 – Nov 30, 2015

Subsystems (2)
Arm (32-bit) Arm/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SoC support
lore
Share & tools
lore

Linus Walleij

author
#0 lore raw

PATCH 1/2 ARM: mvebu: update v5 defconfig

This just regenerates the v5 mvebu defconfig with the latest defaults so as to avoid too much fuzz when applying patches to it.

Signed-off-by Linus Walleij <[email protected]>
---
 arch/arm/configs/mvebu_v5_defconfig | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)
arch/arm/configs/mvebu_v5_defconfig +2 -10
index 824de499237b..519c72725798 100644
@@ -12,7 +12,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_NETXBIG=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y

@@ -66,8 +65,6 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
-CONFIG_NET_DSA_MV88E6171=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y

@@ -91,7 +88,6 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y

@@ -103,16 +99,15 @@ CONFIG_SENSORS_LM85=y
 CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_T5325=y
 CONFIG_SND_SOC_ALC5623=y
 CONFIG_SND_SIMPLE_CARD=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y

@@ -159,8 +154,6 @@ CONFIG_STAGING=y
 CONFIG_FB_XGI=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m

@@ -186,7 +179,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
Signature · 1 line
2.4.3
maintainer
#1 lore raw

PATCH 1/2 ARM: mvebu: update v5 defconfig

Quoted 22 lines · Linus Walleij

This just regenerates the v5 mvebu defconfig with the latest defaults so as to avoid too much fuzz when applying patches to it.

Signed-off-by Linus Walleij <[email protected]>
---
 arch/arm/configs/mvebu_v5_defconfig | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)
arch/arm/configs/mvebu_v5_defconfig +0 -1
index 824de499237b..519c72725798 100644
@@ -12,7 +12,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_NETXBIG=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y

arch/arm/configs/mvebu_v5_defconfig CONFIG_ATA=y · line 70

Quoted 5 lines
arch/arm/configs/mvebu_v5_defconfig +0 -2
@@ -66,8 +65,6 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
-CONFIG_NET_DSA_MV88E6171=y

This is interesting. I guess because of switchdev.

Quoted 13 lines
arch/arm/configs/mvebu_v5_defconfig +0 -1
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y

@@ -91,7 +88,6 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y

@@ -103,16 +99,15 @@ CONFIG_SENSORS_LM85=y
 CONFIG_THERMAL=y

arch/arm/configs/mvebu_v5_defconfig CONFIG_SENSORS_LM85=y · line 111

Quoted 10 lines
arch/arm/configs/mvebu_v5_defconfig +2 -1
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_T5325=y

Humm

I think i will be sending a follow-up patch to re-enable these things. Add the missing dependencies.

Andrew

author
#2 lore raw

PATCH 1/2 ARM: mvebu: update v5 defconfig

Quoted 8 lines · Andrew Lunn
Quoted 2 lines · Linus Walleij

CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_T5325=y

Humm

I think i will be sending a follow-up patch to re-enable these things. Add the missing dependencies.

Which do you mean? The symbol SND_KIRKWOOD_SOC_T5325 you removed in
commit 270a85c80c8645368f9768b120bd9eac4db23590 "ASoC: kirkwood: Remove unused drivers"

EXT4 does not need to be explicitly selected since EXT3 is provided by EXT4 these days, I guess.

The rest I think are selected anyway so that is why they're not in the reduced defconfigs.

Yours,
Linus Walleij

maintainer
#3 lore raw

PATCH 1/2 ARM: mvebu: update v5 defconfig

Quoted 2 lines

The rest I think are selected anyway so that is why they're not in the reduced defconfigs.

I'm pretty sure that DSA now require SWITCHDEV be enabled.

Andrew

#4 lore raw

PATCH 1/2 ARM: mvebu: update v5 defconfig

In reply to Andrew Lunn

Hi Andrew,

On mer., nov. 25 2015, Andrew Lunn <[email protected]> wrote:
[...]

Quoted 4 lines

Humm

I think i will be sending a follow-up patch to re-enable these things. Add the missing dependencies.

Does it means thay you agree with this series?

If you do, then I am going tp apply it on mvebu/defconfig.

Thanks,

Gregory

Signature · 4 lines
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#6 lore raw

PATCH 1/2 ARM: mvebu: update v5 defconfig

In reply to Linus Walleij

Hi Linus,

Quoted 5 lines · Linus Walleij

This just regenerates the v5 mvebu defconfig with the latest defaults so as to avoid too much fuzz when applying patches to it.

Signed-off-by Linus Walleij <[email protected]>

Applied on mvebu/defconfig

with Andrew's Acked-by

Thanks,

Gregory

Quoted 72 lines
---
 arch/arm/configs/mvebu_v5_defconfig | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)
arch/arm/configs/mvebu_v5_defconfig +2 -10
index 824de499237b..519c72725798 100644
@@ -12,7 +12,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_NETXBIG=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y

@@ -66,8 +65,6 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
-CONFIG_NET_DSA_MV88E6171=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y

@@ -91,7 +88,6 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y

@@ -103,16 +99,15 @@ CONFIG_SENSORS_LM85=y
 CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_T5325=y
 CONFIG_SND_SOC_ALC5623=y
 CONFIG_SND_SIMPLE_CARD=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y

@@ -159,8 +154,6 @@ CONFIG_STAGING=y
 CONFIG_FB_XGI=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m

@@ -186,7 +179,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
Signature · 1 line
2.4.3
Signature · 4 lines
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com