ARM: mvebu: update v5 defconfig
Subsystems (2)
PATCH 1/2 ARM: mvebu: update v5 defconfig
This just regenerates the v5 mvebu defconfig with the latest defaults so as to avoid too much fuzz when applying patches to it.
--- arch/arm/configs/mvebu_v5_defconfig | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)
arch/arm/configs/mvebu_v5_defconfig +2 -10
@@ -12,7 +12,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_NETXBIG=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y
@@ -66,8 +65,6 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_NET_DSA_MV88E6123_61_65=y -CONFIG_NET_DSA_MV88E6171=y CONFIG_MV643XX_ETH=y CONFIG_R8169=y CONFIG_MARVELL_PHY=y
@@ -91,7 +88,6 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y
@@ -103,16 +99,15 @@ CONFIG_SENSORS_LM85=y CONFIG_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y -CONFIG_SND_KIRKWOOD_SOC_T5325=y CONFIG_SND_SOC_ALC5623=y CONFIG_SND_SIMPLE_CARD=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y
@@ -159,8 +154,6 @@ CONFIG_STAGING=y CONFIG_FB_XGI=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m
@@ -186,7 +179,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=y
Signature · 1 line
2.4.3
Andrew Lunn
maintainerPATCH 1/2 ARM: mvebu: update v5 defconfig
Quoted 22 lines · Linus Walleij
This just regenerates the v5 mvebu defconfig with the latest defaults so as to avoid too much fuzz when applying patches to it.
Signed-off-by Linus Walleij <[email protected]>--- arch/arm/configs/mvebu_v5_defconfig | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)arch/arm/configs/mvebu_v5_defconfig +0
-1@@ -12,7 +12,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_NETXBIG=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y
arch/arm/configs/mvebu_v5_defconfig CONFIG_ATA=y · line 70
Quoted 5 lines
arch/arm/configs/mvebu_v5_defconfig +0
-2@@ -66,8 +65,6 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_NET_DSA_MV88E6123_61_65=y -CONFIG_NET_DSA_MV88E6171=y
This is interesting. I guess because of switchdev.
Quoted 13 lines
arch/arm/configs/mvebu_v5_defconfig +0
-1CONFIG_MV643XX_ETH=y CONFIG_R8169=y CONFIG_MARVELL_PHY=y@@ -91,7 +88,6 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y@@ -103,16 +99,15 @@ CONFIG_SENSORS_LM85=y CONFIG_THERMAL=y
arch/arm/configs/mvebu_v5_defconfig CONFIG_SENSORS_LM85=y · line 111
Quoted 10 lines
arch/arm/configs/mvebu_v5_defconfig +2
-1CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y -CONFIG_SND_KIRKWOOD_SOC_T5325=y
Humm
I think i will be sending a follow-up patch to re-enable these things. Add the missing dependencies.
Andrew
PATCH 1/2 ARM: mvebu: update v5 defconfig
Quoted 8 lines · Andrew Lunn
Quoted 2 lines · Linus Walleij
CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_T5325=yHumm
I think i will be sending a follow-up patch to re-enable these things. Add the missing dependencies.
Which do you mean? The symbol SND_KIRKWOOD_SOC_T5325 you removed in
commit 270a85c80c8645368f9768b120bd9eac4db23590 "ASoC: kirkwood: Remove unused drivers"
EXT4 does not need to be explicitly selected since EXT3 is provided by EXT4 these days, I guess.
The rest I think are selected anyway so that is why they're not in the reduced defconfigs.
Yours,
Linus Walleij
Andrew Lunn
maintainerPATCH 1/2 ARM: mvebu: update v5 defconfig
Quoted 2 lines
The rest I think are selected anyway so that is why they're not in the reduced defconfigs.
I'm pretty sure that DSA now require SWITCHDEV be enabled.
Andrew
PATCH 1/2 ARM: mvebu: update v5 defconfig
In reply to Andrew LunnHi Andrew,
On mer., nov. 25 2015, Andrew Lunn <[email protected]> wrote:
[...]
Quoted 4 lines
Humm
I think i will be sending a follow-up patch to re-enable these things. Add the missing dependencies.
Does it means thay you agree with this series?
If you do, then I am going tp apply it on mvebu/defconfig.
Thanks,
Gregory
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
Andrew Lunn
maintainerPATCH 1/2 ARM: mvebu: update v5 defconfig
In reply to Linus WalleijQuoted 5 lines · Linus Walleij
This just regenerates the v5 mvebu defconfig with the latest defaults so as to avoid too much fuzz when applying patches to it.
Signed-off-by Linus Walleij <[email protected]>
Andrew
PATCH 1/2 ARM: mvebu: update v5 defconfig
In reply to Linus WalleijHi Linus,
Quoted 5 lines · Linus Walleij
This just regenerates the v5 mvebu defconfig with the latest defaults so as to avoid too much fuzz when applying patches to it.
Signed-off-by Linus Walleij <[email protected]>
Applied on mvebu/defconfig
with Andrew's Acked-by
Thanks,
Gregory
Quoted 72 lines
--- arch/arm/configs/mvebu_v5_defconfig | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)arch/arm/configs/mvebu_v5_defconfig +2
-10@@ -12,7 +12,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_NETXBIG=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y@@ -66,8 +65,6 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_NET_DSA_MV88E6123_61_65=y -CONFIG_NET_DSA_MV88E6171=y CONFIG_MV643XX_ETH=y CONFIG_R8169=y CONFIG_MARVELL_PHY=y@@ -91,7 +88,6 @@ CONFIG_I2C_MV64XXX=y CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y@@ -103,16 +99,15 @@ CONFIG_SENSORS_LM85=y CONFIG_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y -CONFIG_SND_KIRKWOOD_SOC_T5325=y CONFIG_SND_SOC_ALC5623=y CONFIG_SND_SIMPLE_CARD=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y@@ -159,8 +154,6 @@ CONFIG_STAGING=y CONFIG_FB_XGI=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m@@ -186,7 +179,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_USER=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y CONFIG_LIBCRC32C=ySignature · 1 line
2.4.3
Signature · 4 lines
Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com