rapidio: add support for RapidIO boot
PATCH 2/4 rapidio: add support for RapidIO boot
From: Aurelien Jacquiot <[email protected]>
RapidIO is a high-performance packet-switched interconnect technology (www.rapidio.org) that can be used for messaging or memory transfers like Ethernet or PCIe.
This commit adds the RapidIO boot functionality for slave mode (i.e. U-Boot does not fetch the images, images are pushed by a peer device/board). A new 'rio' command group allows to initialize and perform basic RapidIO operations.
This feature has been firstly designed for TI KeyStone architecture but can used by any device that has hardware RapidIO support and corresponding driver.
For more information, read the doc/README.rapidio documentation.
--- common/Kconfig | 7 +- common/Makefile | 1 + common/cmd_rio.c | 260 +++++++++++++++++++++++++++++++++++++ include/rio.h | 382 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 649 insertions(+), 1 deletions(-) create mode 100644 common/cmd_rio.c create mode 100644 include/rio.h
common/Kconfig +6 -1
@@ -355,8 +355,13 @@ config CMD_REMOTEPROC depends on REMOTEPROC help Support for Remote Processor control -endmenu +config CMD_RIO + bool "rapidio" + help + RapidIO support. + +endmenu menu "Shell scripting commands"
common/Makefile +1 -0
@@ -195,6 +195,7 @@ obj-$(CONFIG_YAFFS2) += cmd_yaffs2.o obj-$(CONFIG_CMD_SPL) += cmd_spl.o obj-$(CONFIG_CMD_ZIP) += cmd_zip.o obj-$(CONFIG_CMD_ZFS) += cmd_zfs.o +obj-$(CONFIG_CMD_RIO) += cmd_rio.o # others obj-$(CONFIG_BOOTSTAGE) += bootstage.o
common/cmd_rio.c new file +260 -0
260 lines not on this page · raw message
include/rio.h new file +382 -0
382 lines not on this page · raw message
Signature · 1 line
1.6.2.1
PATCH 2/4 rapidio: add support for RapidIO boot
Quoted 5 lines · jacquiot.aurelien at gmail.com
From: Aurelien Jacquiot <[email protected]>
RapidIO is a high-performance packet-switched interconnect technology (www.rapidio.org) that can be used for messaging or memory transfers like Ethernet or PCIe.
[snip]
common/Kconfig config CMD_REMOTEPROC · line 362
Quoted 4 lines
common/Kconfig +4
-0+config CMD_RIO + bool "rapidio" + help + RapidIO support.
Please expand this to include what is and is not supported in RapidIO right now with your patches.
[snip]
common/cmd_rio.c line 42
Quoted 9 lines
common/cmd_rio.c new file +9
-0+/* hostid */ +if (argc >=2 ) { + riohdid =simple_strtol (argv[2 ],NULL ,10 ); + }else { + s =getenv ("riohdid" ); +if (s !=NULL ) + riohdid =simple_strtol (s,NULL ,10 ); + goto call_init; + }
Here and elsewhere, command inputs are in hex not decimal. 'sleep' is the one and only exception (and causes headaches) to this rule.
Quoted 28 lines
common/cmd_rio.c new file +28
-0+/* dev-id size */ +if (argc >=3 ) { + riosize =simple_strtol (argv[3 ],NULL ,10 ); + }else { + s =getenv ("riosize" ); +if (s !=NULL ) + riosize =simple_strtol (s,NULL ,10 ); + goto call_init; + } + +/* port bitmask */ +if (argc >=4 ) { + rioports =simple_strtoul (argv[4 ],NULL ,16 ); + }else { + s =getenv ("rioports" ); +if (s !=NULL ) + rioports =simple_strtoul (s,NULL ,16 ); + goto call_init; + } + +/* port path mode */ +if (argc >=5 ) { + riopmode =simple_strtol (argv[5 ],NULL ,10 ); + }else { + s =getenv ("riopathmode" ); +if (s !=NULL ) + riopmode =simple_strtol (s,NULL ,10 ); + goto call_init;
common/cmd_rio.c line 81
Quoted 10 lines
common/cmd_rio.c new file +10
-0+ } + +/* baudrate */ +if (argc >=6 ) { + riobaudrate =simple_strtol (argv[6 ],NULL ,10 ); + }else { + s =getenv ("riobaudrate" ); +if (s !=NULL ) + riobaudrate =simple_strtol (s,NULL ,10 ); + }
At first glance this seems broken for the case where one of riopathmode/riobaudrate/etc are neither passed nor in the environment. Or will rio_init handle this case correctly and pass back failure? Also, is there a usecase for having these be set in the environment rather than passed?
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160104/ce932fb7/attachment.sig>