Skip to contentSkip to conversation

barebox won't boot from SD card on iMX233-OLinuXino-MAXI

BUG Peter Mamonov 2 participants 3 messages Jan 11, 2016

Subsystems (3)
lore
Share & tools
lore
reviewer
#1 lore raw
Quoted 6 lines · Peter Mamonov

At least nothing is printed to the Debug UART.

git-bisect points to the following patch:
4d70da6 ARM: MXS: power-init: Add parameters to mx28_power_init()

Reverting this patch fixes the issue.

Does this help? Haven't tested it:

arch/arm/boards/imx233-olinuxino/lowlevel.c +1 -1
@@ -154,7 +154,7 @@ static noinline void imx23_olinuxino_init(void)
 
        pr_debug("initializing power...\n");
 
-       mx23_power_init(0, 1, 0);
+       mx23_power_init(0, 0, 1);
 
        pr_debug("initializing SDRAM...\n");
 

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#2 lore raw

В Mon, 11 Jan 2016 20:02:11 -0200
Fabio Estevam <[email protected]> пишет:

Quoted 13 lines · Peter Mamonov
Quoted 6 lines

At least nothing is printed to the Debug UART.

git-bisect points to the following patch:
4d70da6 ARM: MXS: power-init: Add parameters to mx28_power_init()

Reverting this patch fixes the issue.

Does this help? Haven't tested it:

arch/arm/boards/imx233-olinuxino/lowlevel.c static noinline void imx23_olinuxino_init(void) · line 159

Quoted 7 lines
arch/arm/boards/imx233-olinuxino/lowlevel.c +1 -1
@@ -154,7 +154,7 @@ static noinline void imx23_olinuxino_init(void)
 
        pr_debug("initializing power...\n");
 
-       mx23_power_init(0, 1, 0);
+       mx23_power_init(0, 0, 1);
 
        pr_debug("initializing SDRAM...\n");

Yes, your patch does help =)

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox