barebox won't boot from SD card on iMX233-OLinuXino-MAXI
Subsystems (3)
At least nothing is printed to the Debug UART.
git-bisect points to the following patch:
4d70da6 ARM: MXS: power-init: Add parameters to mx28_power_init()
Reverting this patch fixes the issue.
Regards,
Peter
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Fabio Estevam
reviewerQuoted 6 lines · Peter Mamonov
At least nothing is printed to the Debug UART.
git-bisect points to the following patch:
4d70da6 ARM: MXS: power-init: Add parameters tomx28_power_init()Reverting this patch fixes the issue.
Does this help? Haven't tested it:
arch/arm/boards/imx233-olinuxino/lowlevel.c +1 -1
@@ -154,7 +154,7 @@ static noinline void imx23_olinuxino_init(void)pr_debug ("initializing power...\n" ); -mx23_power_init (0 ,1 ,0 ); +mx23_power_init (0 ,0 ,1 );pr_debug ("initializing SDRAM...\n" );
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
В Mon, 11 Jan 2016 20:02:11 -0200
Fabio Estevam <[email protected]> пишет:
Quoted 13 lines · Peter Mamonov
Quoted 6 lines
At least nothing is printed to the Debug UART.
git-bisect points to the following patch:
4d70da6 ARM: MXS: power-init: Add parameters tomx28_power_init()Reverting this patch fixes the issue.
Does this help? Haven't tested it:
arch/arm/boards/imx233-olinuxino/lowlevel.c static noinline void imx23_olinuxino_init(void) · line 159
Quoted 7 lines
arch/arm/boards/imx233-olinuxino/lowlevel.c +1
-1@@ -154,7 +154,7 @@ static noinline void imx23_olinuxino_init(void)pr_debug ("initializing power...\n" ); -mx23_power_init (0 ,1 ,0 ); +mx23_power_init (0 ,0 ,1 );pr_debug ("initializing SDRAM...\n" );
Yes, your patch does help =)
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox