Skip to contentSkip to conversation

PROBLEM: Intel HDMI output busticated on 4.4 (regression)

PATCH Nick Bowler 5 participants 15 messages Jan 19, 2016 – Feb 10, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi,

Upgrading from 4.3 to 4.4 breaks my HDMI output on my G45 machine.

As soon as the intel driver is loaded, the monitor shuts off (standby mode). Inspecting /sys/class/drm/card0-HDMI-A-1/status reports "disconnected". When it is working, this attribute says "connected".

There is nothing unusual printed to dmesg.

Bisection pinpoints the following:

237ed86c693d8a8e4db476976aeb30df4deac74b is the first bad commit commit 237ed86c693d8a8e4db476976aeb30df4deac74b
Author: Sonika Jindal <[email protected]>
Date: Tue Sep 15 09:44:20 2015 +0530

drm/i915: Check live status before reading edid

The commit does not revert cleanly, but this patch resolves the issue:

drivers/gpu/drm/i915/intel_hdmi.c +1 -1
index e6c035b0fc1c..8cefb9105f26 100644
@@ -1393,7 +1393,7 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
 
        intel_hdmi_unset_edid(connector);
 
-       if (intel_hdmi_set_edid(connector, live_status)) {
+       if (intel_hdmi_set_edid(connector, true)) {
                struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
 
                hdmi_to_dig_port(intel_hdmi)->base.type = INTEL_OUTPUT_HDMI;

Let me know if you need any more info.

Thanks,
Nick

#1 lore raw

Can you please check if you have following patch:
"commit 3d8acd1f667b45c531401c8f0c2033072e32a05d

Author: Gary Wang <[email protected]>
Date:   Wed Dec 23 16:11:35 2015 +0800

drm/i915: increase the tries for HDMI hotplug live status checking"

For some monitors, 30ms delay is not good enough to report the live status correctly.

Does the same system works with any other monitor?

Daniel,

Can this be related to the live status bits on g45? "commit 0ce99f749b3834edeb500e17d6ad17e86b60ff83

Author: Daniel Vetter <[email protected]>
Date:   Fri Jul 26 11:27:49 2013 +0200

drm/i915: fix gen4 digital port hotplug definitions"

Regards,
Sonika

Quoted 41 lines · Nick Bowler

Hi,

Upgrading from 4.3 to 4.4 breaks my HDMI output on my G45 machine.

As soon as the intel driver is loaded, the monitor shuts off (standby mode). Inspecting /sys/class/drm/card0-HDMI-A-1/status reports "disconnected". When it is working, this attribute says "connected".

There is nothing unusual printed to dmesg.

Bisection pinpoints the following:

237ed86c693d8a8e4db476976aeb30df4deac74b is the first bad commit commit 237ed86c693d8a8e4db476976aeb30df4deac74b
Author: Sonika Jindal <[email protected]>
Date: Tue Sep 15 09:44:20 2015 +0530

drm/i915: Check live status before reading edid

The commit does not revert cleanly, but this patch resolves the issue:

drivers/gpu/drm/i915/intel_hdmi.c +1 -1
index e6c035b0fc1c..8cefb9105f26 100644
@@ -1393,7 +1393,7 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
 
         intel_hdmi_unset_edid(connector);
 
-       if (intel_hdmi_set_edid(connector, live_status)) {
+       if (intel_hdmi_set_edid(connector, true)) {
                 struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
 
                 hdmi_to_dig_port(intel_hdmi)->base.type = INTEL_OUTPUT_HDMI;
Quoted 4 lines

Let me know if you need any more info.

Thanks,
Nick

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

#2 lore raw

Hi,

Quoted 6 lines · Sonika

Can you please check if you have following patch:
"commit 3d8acd1f667b45c531401c8f0c2033072e32a05d

Author: Gary Wang <[email protected]>
Date:   Wed Dec 23 16:11:35 2015 +0800

drm/i915: increase the tries for HDMI hotplug live status checking"

Yes, that patch seems to be present in 4.4.

Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

Thanks,
Nick

#3 lore raw
Quoted 8 lines · Nick Bowler

Hi,

Quoted 5 lines · Sonika

Can you please check if you have following patch:
"commit 3d8acd1f667b45c531401c8f0c2033072e32a05d

Author: Gary Wang <[email protected]>
Date:   Wed Dec 23 16:11:35 2015 +0800
Quoted 7 lines
Quoted 1 line

drm/i915: increase the tries for HDMI hotplug live status checking"

Yes, that patch seems to be present in 4.4.

Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

#4 lore raw
Quoted 9 lines · Nick Bowler
Quoted 8 lines · Nick Bowler

Hi,

Quoted 5 lines · Sonika

Can you please check if you have following patch:
"commit 3d8acd1f667b45c531401c8f0c2033072e32a05d

Author: Gary Wang <[email protected]>
Date:   Wed Dec 23 16:11:35 2015 +0800
Quoted 6 lines
Quoted 5 lines
Quoted 1 line

drm/i915: increase the tries for HDMI hotplug live status checking"

Yes, that patch seems to be present in 4.4.

Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

Which make are these monitors?
Do you have any other system other than G45?

Shashank,
Do you suggest anything else which Nick can try?

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

#5 lore raw
Quoted 3 lines · Sonika
Quoted 2 lines · Nick Bowler
Quoted 1 line · Nick Bowler

On 2016-01-20, Jindal, Sonika <[email protected]> wrote:

[...]

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

Which make are these monitors?

- LG Flatron W2253V
- Dell E228WFPc

Quoted 1 line

Do you have any other system other than G45?

Nothing else with Linux 4.4, unfortunately.

Thanks,
Nick

#6 lore raw
Quoted 8 lines · Nick Bowler
Quoted 3 lines · Sonika
Quoted 2 lines · Nick Bowler
Quoted 1 line · Nick Bowler

On 2016-01-20, Jindal, Sonika <[email protected]> wrote:

[...]

Quoted 3 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

Quoted 8 lines
Quoted 1 line

Which make are these monitors?

- LG Flatron W2253V
- Dell E228WFPc

Quoted 1 line

Do you have any other system other than G45?

Nothing else with Linux 4.4, unfortunately.

Anything else you want me to try?

This issue is still present in 4.5-rc1.

Cheers,
Nick

#7 lore raw
Quoted 14 lines · Nick Bowler
Quoted 13 lines · Nick Bowler
Quoted 3 lines · Sonika
Quoted 2 lines · Nick Bowler
Quoted 1 line · Nick Bowler

On 2016-01-20, Jindal, Sonika <[email protected]> wrote:

[...]

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

Which make are these monitors?

- LG Flatron W2253V
- Dell E228WFPc

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Do you have any other system other than G45?

Nothing else with Linux 4.4, unfortunately.

Anything else you want me to try?

This issue is still present in 4.5-rc1.

Ping?

HDMI is still broken on my system in 4.5-rc3.

Cheers,
Nick

#8 lore raw

Hi Nick,

Sonika is OOO for this week.
AFAIK about this issue, looks like the live status is not getting set for your system, on HPD.

As per the Bspec, we must check live status before trying to read EDID. Is it possible for you to check with an HDMI analyzer and probe live status register ?

Regards
Shashank
-----Original Message-----
From: Nick Bowler [mailto:[email protected]]
Sent: Tuesday, February 09, 2016 10:03 PM
To: Jindal, Sonika
Cc: [email protected]; [email protected]; Daniel Vetter; Sharma, Shashank
Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression)

Quoted 14 lines · Nick Bowler
Quoted 13 lines · Nick Bowler
Quoted 3 lines · Sonika
Quoted 2 lines · Nick Bowler
Quoted 1 line · Nick Bowler

On 2016-01-20, Jindal, Sonika <[email protected]> wrote:

[...]

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

Which make are these monitors?

- LG Flatron W2253V
- Dell E228WFPc

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Do you have any other system other than G45?

Nothing else with Linux 4.4, unfortunately.

Anything else you want me to try?

This issue is still present in 4.5-rc1.

Ping?

HDMI is still broken on my system in 4.5-rc3.

Cheers,
Nick
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#9 lore raw
Quoted 7 lines · Shashank

Hi Nick,

Sonika is OOO for this week.
AFAIK about this issue, looks like the live status is not getting set for your system, on HPD.

As per the Bspec, we must check live status before trying to read EDID. Is it possible for you to check with an HDMI analyzer and probe live status register ?

BTW I'm not at all convinced about the current live status bit defines we have for g4x. Supposedly someone tested them and found that they don't match the spec, but IIRC when I tried them on one g4x machine here, they did match the spec (well, at least for the ports present on that particular board).

So something like this may or may not help:

drivers/gpu/drm/i915/i915_reg.h +2 -2
index 188ad5de020f..80c08016e522 100644
@@ -3302,9 +3302,9 @@ enum skl_disp_power_wells {
  * Please check the detailed lore in the commit message for for experimental
  * evidence.
  */
-#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
+#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_G4X		(1 << 28)
-#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
+#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
 /* VLV DP/HDMI bits again match Bspec */
 #define   PORTD_HOTPLUG_LIVE_STATUS_VLV		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_VLV		(1 << 28)
Signature · 1 line
2.4.10
Quoted 43 lines

Regards
Shashank
-----Original Message-----
From: Nick Bowler [mailto:[email protected]]
Sent: Tuesday, February 09, 2016 10:03 PM
To: Jindal, Sonika
Cc: [email protected]; [email protected]; Daniel Vetter; Sharma, Shashank
Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression)

Quoted 14 lines · Nick Bowler
Quoted 13 lines · Nick Bowler
Quoted 3 lines · Sonika
Quoted 2 lines · Nick Bowler
Quoted 1 line · Nick Bowler

On 2016-01-20, Jindal, Sonika <[email protected]> wrote:

[...]

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

Which make are these monitors?

- LG Flatron W2253V
- Dell E228WFPc

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Do you have any other system other than G45?

Nothing else with Linux 4.4, unfortunately.

Anything else you want me to try?

This issue is still present in 4.5-rc1.

Ping?

HDMI is still broken on my system in 4.5-rc3.

Cheers,
Nick
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Signature · 2 lines
Ville Syrjälä
Intel OTC
#10 lore raw
Quoted 23 lines · Ville Syrjälä
Quoted 7 lines · Shashank

Hi Nick,

Sonika is OOO for this week.
AFAIK about this issue, looks like the live status is not getting set for your system, on HPD.

As per the Bspec, we must check live status before trying to read EDID. Is it possible for you to check with an HDMI analyzer and probe live status register ?

BTW I'm not at all convinced about the current live status bit defines we have for g4x. Supposedly someone tested them and found that they don't match the spec, but IIRC when I tried them on one g4x machine here, they did match the spec (well, at least for the ports present on that particular board).

So something like this may or may not help:

drivers/gpu/drm/i915/i915_reg.h +0 -0
index 188ad5de020f..80c08016e522 100644
@@ -3302,9 +3302,9 @@ enum skl_disp_power_wells {
  * Please check the detailed lore in the commit message for for experimental

drivers/gpu/drm/i915/i915_reg.h enum skl_disp_power_wells { · line 3310

Quoted 10 lines
drivers/gpu/drm/i915/i915_reg.h +2 -2
  * evidence.
  */
-#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
+#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_G4X		(1 << 28)
-#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
+#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
 /* VLV DP/HDMI bits again match Bspec */
 #define   PORTD_HOTPLUG_LIVE_STATUS_VLV		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_VLV		(1 << 28)

Just retested the g4x machine here, and port B is definitely on bit 29, port C on bit 28. No port D on ELK, so can't check that. So either someone made a fumble when they tested this originally, or some boards are just wired incorrectly, or CTG is where it was tested and that actually disagrees with the spec for some reason.

Quoted 55 lines
Signature · 1 line
2.4.10
Quoted 43 lines

Regards
Shashank
-----Original Message-----
From: Nick Bowler [mailto:[email protected]]
Sent: Tuesday, February 09, 2016 10:03 PM
To: Jindal, Sonika
Cc: [email protected]; [email protected]; Daniel Vetter; Sharma, Shashank
Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression)

Quoted 14 lines · Nick Bowler
Quoted 13 lines · Nick Bowler
Quoted 3 lines · Sonika
Quoted 2 lines · Nick Bowler
Quoted 1 line · Nick Bowler

On 2016-01-20, Jindal, Sonika <[email protected]> wrote:

[...]

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

Which make are these monitors?

- LG Flatron W2253V
- Dell E228WFPc

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Do you have any other system other than G45?

Nothing else with Linux 4.4, unfortunately.

Anything else you want me to try?

This issue is still present in 4.5-rc1.

Ping?

HDMI is still broken on my system in 4.5-rc3.

Cheers,
Nick
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 2 lines
Ville Syrjälä
Intel OTC
#11 lore raw
Quoted 32 lines · Ville Syrjälä
Quoted 31 lines · Ville Syrjälä
Quoted 7 lines · Shashank

Hi Nick,

Sonika is OOO for this week.
AFAIK about this issue, looks like the live status is not getting set for your system, on HPD.

As per the Bspec, we must check live status before trying to read EDID. Is it possible for you to check with an HDMI analyzer and probe live status register ?

BTW I'm not at all convinced about the current live status bit defines we have for g4x. Supposedly someone tested them and found that they don't match the spec, but IIRC when I tried them on one g4x machine here, they did match the spec (well, at least for the ports present on that particular board).

So something like this may or may not help:

drivers/gpu/drm/i915/i915_reg.h +2 -2
index 188ad5de020f..80c08016e522 100644
@@ -3302,9 +3302,9 @@ enum skl_disp_power_wells {
  * Please check the detailed lore in the commit message for for experimental
  * evidence.
  */
-#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
+#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_G4X		(1 << 28)
-#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
+#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
 /* VLV DP/HDMI bits again match Bspec */
Quoted 8 lines

drivers/gpu/drm/i915/i915_reg.h enum skl_disp_power_wells { · line 3310

Quoted 2 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 #define   PORTD_HOTPLUG_LIVE_STATUS_VLV		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_VLV		(1 << 28)

Just retested the g4x machine here, and port B is definitely on bit 29, port C on bit 28. No port D on ELK, so can't check that. So either someone made a fumble when they tested this originally, or some boards are just wired incorrectly, or CTG is where it was tested and that actually disagrees with the spec for some reason.

I just tried to trawl the w/a database for anything interesting, and the only thing I ran across was WaDPHDMISupriousHpd (without any description of course) for both elk and ctg. Nothing else really relevant looking.

So I think we should get someone to double check this on ctg, and then we can decide whether we change the bits just for elk or for ctg as well.

Quoted 64 lines
Quoted 56 lines
Signature · 2 lines
-- 
2.4.10
Quoted 43 lines

Regards
Shashank
-----Original Message-----
From: Nick Bowler [mailto:[email protected]]
Sent: Tuesday, February 09, 2016 10:03 PM
To: Jindal, Sonika
Cc: [email protected]; [email protected]; Daniel Vetter; Sharma, Shashank
Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression)

Quoted 14 lines · Nick Bowler
Quoted 13 lines · Nick Bowler
Quoted 3 lines · Sonika
Quoted 2 lines · Nick Bowler
Quoted 1 line · Nick Bowler

On 2016-01-20, Jindal, Sonika <[email protected]> wrote:

[...]

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

Which make are these monitors?

- LG Flatron W2253V
- Dell E228WFPc

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Do you have any other system other than G45?

Nothing else with Linux 4.4, unfortunately.

Anything else you want me to try?

This issue is still present in 4.5-rc1.

Ping?

HDMI is still broken on my system in 4.5-rc3.

Cheers,
Nick
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#12 lore raw

I checked locally in BDC,
Seems we don't have these boards available with us (in working state).

Regards
Shashank
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, February 09, 2016 11:53 PM
To: Sharma, Shashank
Cc: Nick Bowler; Daniel Vetter; [email protected]; [email protected]
Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression)

Quoted 33 lines · Ville Syrjälä
Quoted 32 lines · Ville Syrjälä
Quoted 7 lines · Shashank

Hi Nick,

Sonika is OOO for this week.
AFAIK about this issue, looks like the live status is not getting set for your system, on HPD.

As per the Bspec, we must check live status before trying to read EDID. Is it possible for you to check with an HDMI analyzer and probe live status register ?

BTW I'm not at all convinced about the current live status bit defines we have for g4x. Supposedly someone tested them and found that they don't match the spec, but IIRC when I tried them on one g4x machine here, they did match the spec (well, at least for the ports present on that particular board).

So something like this may or may not help:

(quoted diff) +0 -0

b/drivers/gpu/drm/i915/i915_reg.h index 188ad5de020f..80c08016e522 100644

drivers/gpu/drm/i915/i915_reg.h +2 -2
@@ -3302,9 +3302,9 @@ enum skl_disp_power_wells {
  * Please check the detailed lore in the commit message for for experimental
  * evidence.
  */
-#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
+#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_G4X		(1 << 28)
-#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
+#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
 /* VLV DP/HDMI bits again match Bspec */
Quoted 8 lines

drivers/gpu/drm/i915/i915_reg.h enum skl_disp_power_wells { · line 3310

Quoted 2 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
 #define   PORTD_HOTPLUG_LIVE_STATUS_VLV		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_VLV		(1 << 28)

Just retested the g4x machine here, and port B is definitely on bit 29, port C on bit 28. No port D on ELK, so can't check that. So either someone made a fumble when they tested this originally, or some boards are just wired incorrectly, or CTG is where it was tested and that actually disagrees with the spec for some reason.

I just tried to trawl the w/a database for anything interesting, and the only thing I ran across was WaDPHDMISupriousHpd (without any description of course) for both elk and ctg. Nothing else really relevant looking.

So I think we should get someone to double check this on ctg, and then we can decide whether we change the bits just for elk or for ctg as well.

Quoted 59 lines
Quoted 51 lines

--
2.4.10

Quoted 37 lines

Regards
Shashank
-----Original Message-----
From: Nick Bowler [mailto:[email protected]]
Sent: Tuesday, February 09, 2016 10:03 PM
To: Jindal, Sonika
Cc: [email protected]; [email protected]; Daniel Vetter; Sharma, Shashank
Subject: Re: PROBLEM: Intel HDMI output busticated on 4.4 (regression)

Quoted 14 lines · Nick Bowler
Quoted 13 lines · Nick Bowler
Quoted 3 lines · Sonika
Quoted 2 lines · Nick Bowler
Quoted 1 line · Nick Bowler

On 2016-01-20, Jindal, Sonika <[email protected]> wrote:

[...]

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines
Quoted 1 line

Does the same system works with any other monitor?

I'll see if I can find another to try.

I tried another monitor, and the same problem occurs.

Which make are these monitors?

- LG Flatron W2253V
- Dell E228WFPc

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Do you have any other system other than G45?

Nothing else with Linux 4.4, unfortunately.

Anything else you want me to try?

This issue is still present in 4.5-rc1.

Ping?

Quoted 8 lines

HDMI is still broken on my system in 4.5-rc3.

Cheers,
Nick
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Quoted 7 lines

--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Quoted 7 lines

--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

#13 lore raw
In reply to Ville Syrjälä
Quoted 18 lines · Ville Syrjälä

BTW I'm not at all convinced about the current live status bit defines we have for g4x. Supposedly someone tested them and found that they don't match the spec, but IIRC when I tried them on one g4x machine here, they did match the spec (well, at least for the ports present on that particular board).

So something like this may or may not help:

drivers/gpu/drm/i915/i915_reg.h +0 -0
index 188ad5de020f..80c08016e522 100644
@@ -3302,9 +3302,9 @@ enum skl_disp_power_wells {
  * Please check the detailed lore in the commit message for for

experimental
* evidence.
*/

drivers/gpu/drm/i915/i915_reg.h enum skl_disp_power_wells { · line 3310

Quoted 8 lines
drivers/gpu/drm/i915/i915_reg.h +2 -2
-#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
+#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_G4X		(1 << 28)
-#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
+#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
 /* VLV DP/HDMI bits again match Bspec */
 #define   PORTD_HOTPLUG_LIVE_STATUS_VLV		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_VLV		(1 << 28)

Well, I applied this on 4.5-rc3 and it seems to fix things.

Thanks,
Nick

maintainer
#14 lore raw
Quoted 21 lines · Nick Bowler
Quoted 20 lines · Ville Syrjälä

BTW I'm not at all convinced about the current live status bit defines we have for g4x. Supposedly someone tested them and found that they don't match the spec, but IIRC when I tried them on one g4x machine here, they did match the spec (well, at least for the ports present on that particular board).

So something like this may or may not help:

drivers/gpu/drm/i915/i915_reg.h +0 -0
index 188ad5de020f..80c08016e522 100644
@@ -3302,9 +3302,9 @@ enum skl_disp_power_wells {
  * Please check the detailed lore in the commit message for for

experimental
* evidence.
*/

drivers/gpu/drm/i915/i915_reg.h +1 -1
-#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
+#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
Quoted 8 lines

drivers/gpu/drm/i915/i915_reg.h enum skl_disp_power_wells { · line 3310

Quoted 6 lines

#define PORTC_HOTPLUG_LIVE_STATUS_G4X (1 << 28)

drivers/gpu/drm/i915/i915_reg.h +1 -1
-#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
+#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
 /* VLV DP/HDMI bits again match Bspec */
 #define   PORTD_HOTPLUG_LIVE_STATUS_VLV		(1 << 27)
 #define   PORTC_HOTPLUG_LIVE_STATUS_VLV		(1 << 28)

Well, I applied this on 4.5-rc3 and it seems to fix things.

Ville, please do a proper patch, using your best judgement on elk vs. ctg difference.

BR,
Jani.

Quoted 7 lines

Thanks,
Nick
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel