Skip to contentSkip to conversation

dtb filename mismatch prevents booting

DISCUSSION Oliver Graute 2 participants 3 messages Feb 10, 2016 – Feb 11, 2016

lore
Share & tools
lore
#0 lore raw

Hello list,

if I try to boot from my yocto generated SD-card image my u-boot can't start the kernel because the imx6ul-14x14-evk.dtb is missing.

reading boot.scr
** Unable to read file boot.scr **
reading zImage
5072288 bytes read in 328 ms (14.7 MiB/s)
Booting from mmc ...
reading imx6ul-14x14-evk.dtb
** Unable to read file imx6ul-14x14-evk.dtb **
Kernel image @ 0x82000000 [ 0x000000 - 0x4d65a0 ]

Starting kernel ...

In my /boot folder I saw a dtb file, but the filename is a bit different.

zImage-imx6ul-14x14-evk.dtb instead of imx6ul-14x14-evk.dtb

So I changed these filename manually and my Image is booting.

mv zImage-imx6ul-14x14-evk.dtb imx6ul-14x14-evk.dtb »zImage-imx6ul-14x14-evk.dtb“ -> »imx6ul-14x14-evk.dtb“

What is the right way to define these dtb filename?

I saw the IMAGE_BOOT_FILES in local.conf

#IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb" IMAGE_BOOT_FILES = "zImage imx6ul-14x14-evk.dtb"

but after I changed it my build fails.

ERROR: Error: The image creation script '/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/create_image.wic' returned 1:
Error: exec_cmd: install -m 0644 -D /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/deploy/images/imx6ulevk/imx6ul-14x14-evk.dtb /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/deploy/images/imx6ulevk/fsl-image-imx6ulevk-20160208144228/build/boot/imx6ul-14x14-evk.dtb returned '1' instead of 0 Checking basic build environment...
Done.

Creating image(s)...

WARNING: /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/create_image.wic:1 exit 1 from
BUILDDIR=/home/graute/5411_IBIS/yocto/build-imx6ulevk wic create $wks --vars /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/sysroots/imx6ulevk/imgdata/ -e fsl-image -o $out/

ERROR: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/log.do_rootfs.17681
ERROR: Task 7 (/home/graute/5411_IBIS/yocto/os-meta-dnt/meta-fsl/recipes-fsl/images/fsl-image.bb, do_rootfs) failed with exit code '1'

some ideas whats going wrong here?

Best regards,

Oliver

#1 lore raw
Quoted 59 lines

Dnia 10 luty 2016 o 17:16 Oliver Graute <[email protected]> napisał(a):

Hello list,

if I try to boot from my yocto generated SD-card image my u-boot can't start the kernel because the imx6ul-14x14-evk.dtb is missing.

reading boot.scr
** Unable to read file boot.scr **
reading zImage
5072288 bytes read in 328 ms (14.7 MiB/s)
Booting from mmc ...
reading imx6ul-14x14-evk.dtb
** Unable to read file imx6ul-14x14-evk.dtb **
Kernel image @ 0x82000000 [ 0x000000 - 0x4d65a0 ]

Starting kernel ...

In my /boot folder I saw a dtb file, but the filename is a bit different.

zImage-imx6ul-14x14-evk.dtb instead of imx6ul-14x14-evk.dtb

So I changed these filename manually and my Image is booting.

mv zImage-imx6ul-14x14-evk.dtb imx6ul-14x14-evk.dtb »zImage-imx6ul-14x14-evk.dtb“ -> »imx6ul-14x14-evk.dtb“

What is the right way to define these dtb filename?

I saw the IMAGE_BOOT_FILES in local.conf

#IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb" IMAGE_BOOT_FILES = "zImage imx6ul-14x14-evk.dtb"

but after I changed it my build fails.

ERROR: Error: The image creation script '/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/create_image.wic' returned 1:
Error: exec_cmd: install -m 0644 -D /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/deploy/images/imx6ulevk/imx6ul-14x14-evk.dtb /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/deploy/images/imx6ulevk/fsl-image-imx6ulevk-20160208144228/build/boot/imx6ul-14x14-evk.dtb returned '1' instead of 0
Checking basic build environment...
Done.

Creating image(s)...

WARNING:
/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/create_image.wic:1 exit 1 from
BUILDDIR=/home/graute/5411_IBIS/yocto/build-imx6ulevk wic create $wks --vars /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/sysroots/imx6ulevk/imgdata/
-e fsl-image -o $out/

Quoted 9 lines

ERROR: Function failed: do_rootfs
ERROR: Logfile of failure stored in:
/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/log.do_rootfs.17681
ERROR: Task 7
(/home/graute/5411_IBIS/yocto/os-meta-dnt/meta-fsl/recipes-fsl/images/fsl-image.bb,
do_rootfs) failed with exit code '1'

some ideas whats going wrong here?

IIRC the usual way was to add kernel-devicetree package and let u-boot pick the proper dtb during boot.

As for IMAGE_BOOT_FILES, you can tell wic to automatically rename files by passing the desired name after a semicolon like this:

IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb;mx6ul-14x14-evk.dtb"

--
Maciej Borzęcki
Senior Software Engineer at Open-RnD Sp. z o.o.
www.open-rnd.pl, Facebook, Twitter

#2 lore raw
Quoted 36 lines · Maciej Borzecki
Quoted 26 lines

Dnia 10 luty 2016 o 17:16 Oliver Graute <[email protected]> napisał(a):

Hello list,

if I try to boot from my yocto generated SD-card image my u-boot can't start the kernel because the imx6ul-14x14-evk.dtb is missing.

reading boot.scr
** Unable to read file boot.scr **
reading zImage
5072288 bytes read in 328 ms (14.7 MiB/s)
Booting from mmc ...
reading imx6ul-14x14-evk.dtb
** Unable to read file imx6ul-14x14-evk.dtb **
Kernel image @ 0x82000000 [ 0x000000 - 0x4d65a0 ]

Starting kernel ...

In my /boot folder I saw a dtb file, but the filename is a bit different.

zImage-imx6ul-14x14-evk.dtb instead of imx6ul-14x14-evk.dtb

Quoted 9 lines

So I changed these filename manually and my Image is booting.

mv zImage-imx6ul-14x14-evk.dtb imx6ul-14x14-evk.dtb »zImage-imx6ul-14x14-evk.dtb“ -> »imx6ul-14x14-evk.dtb“

What is the right way to define these dtb filename?

some ideas whats going wrong here?

Quoted 7 lines

IIRC the usual way was to add kernel-devicetree package and let u-boot pick the proper dtb during boot.

As for IMAGE_BOOT_FILES, you can tell wic to automatically rename files by passing the desired name after a semicolon like this:

IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb;mx6ul-14x14-evk.dtb"

ok that worked for me, I changed it like this

-IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb" +IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb;imx6ul-14x14-evk.dtb"

now the Image is directly booting without manually renaming.

thx for your help

Best Rgeards,

Oliver