dtb filename mismatch prevents booting
Hello list,
if I try to boot from my yocto generated SD-card image my u-boot can't start the kernel because the imx6ul-14x14-evk.dtb is missing.
reading boot.scr
** Unable to read file boot.scr **
reading zImage
5072288 bytes read in 328 ms (14.7 MiB/s)
Booting from mmc ...
reading imx6ul-14x14-evk.dtb
** Unable to read file imx6ul-14x14-evk.dtb **
Kernel image @ 0x82000000 [ 0x000000 - 0x4d65a0 ]
Starting kernel ...
In my /boot folder I saw a dtb file, but the filename is a bit different.
zImage-imx6ul-14x14-evk.dtb instead of imx6ul-14x14-evk.dtb
So I changed these filename manually and my Image is booting.
mv zImage-imx6ul-14x14-evk.dtb imx6ul-14x14-evk.dtb »zImage-imx6ul-14x14-evk.dtb“ -> »imx6ul-14x14-evk.dtb“
What is the right way to define these dtb filename?
I saw the IMAGE_BOOT_FILES in local.conf
#IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb" IMAGE_BOOT_FILES = "zImage imx6ul-14x14-evk.dtb"
but after I changed it my build fails.
ERROR: Error: The image creation script '/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/create_image.wic' returned 1:
Error: exec_cmd: install -m 0644 -D /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/deploy/images/imx6ulevk/imx6ul-14x14-evk.dtb /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/deploy/images/imx6ulevk/fsl-image-imx6ulevk-20160208144228/build/boot/imx6ul-14x14-evk.dtb returned '1' instead of 0 Checking basic build environment...
Done.
Creating image(s)...
WARNING: /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/create_image.wic:1 exit 1 from
BUILDDIR=/home/graute/5411_IBIS/yocto/build-imx6ulevk wic create $wks --vars /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/sysroots/imx6ulevk/imgdata/ -e fsl-image -o $out/
ERROR: Function failed: do_rootfs
ERROR: Logfile of failure stored in: /home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/log.do_rootfs.17681
ERROR: Task 7 (/home/graute/5411_IBIS/yocto/os-meta-dnt/meta-fsl/recipes-fsl/images/fsl-image.bb, do_rootfs) failed with exit code '1'
some ideas whats going wrong here?
Best regards,
Oliver
Quoted 59 lines
Dnia 10 luty 2016 o 17:16 Oliver Graute <[email protected]> napisał(a):
Hello list,
if I try to boot from my yocto generated SD-card image my u-boot can't start the kernel because the imx6ul-14x14-evk.dtb is missing.
reading boot.scr
** Unable to read file boot.scr **
reading zImage
5072288 bytes read in 328 ms (14.7 MiB/s)
Booting from mmc ...
reading imx6ul-14x14-evk.dtb
** Unable to read file imx6ul-14x14-evk.dtb **
Kernel image @0x82000000[0x000000-0x4d65a0]Starting kernel ...
In my /boot folder I saw a dtb file, but the filename is a bit different.
zImage-imx6ul-14x14-evk.dtb instead of imx6ul-14x14-evk.dtb
So I changed these filename manually and my Image is booting.
mv zImage-imx6ul-14x14-evk.dtb imx6ul-14x14-evk.dtb »zImage-imx6ul-14x14-evk.dtb“ -> »imx6ul-14x14-evk.dtb“
What is the right way to define these dtb filename?
I saw the
IMAGE_BOOT_FILESin local.conf#IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb"
IMAGE_BOOT_FILES= "zImage imx6ul-14x14-evk.dtb"but after I changed it my build fails.
ERROR: Error: The image creation script '
/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/create_image.wic' returned 1:
Error:exec_cmd: install -m 0644 -D/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/deploy/images/imx6ulevk/imx6ul-14x14-evk.dtb/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/deploy/images/imx6ulevk/fsl-image-imx6ulevk-20160208144228/build/boot/imx6ul-14x14-evk.dtbreturned '1' instead of 0
Checking basic build environment...
Done.Creating image(s)...
WARNING:
/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/create_image.wic:1exit 1 from
BUILDDIR=/home/graute/5411_IBIS/yocto/build-imx6ulevk wic create $wks --vars/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/sysroots/imx6ulevk/imgdata/
-e fsl-image -o $out/
Quoted 9 lines
ERROR: Function failed:
do_rootfs
ERROR: Logfile of failure stored in:/home/graute/5411_IBIS/yocto/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/log.do_rootfs.17681
ERROR: Task 7
(/home/graute/5411_IBIS/yocto/os-meta-dnt/meta-fsl/recipes-fsl/images/fsl-image.bb,do_rootfs) failed with exit code '1'some ideas whats going wrong here?
IIRC the usual way was to add kernel-devicetree package and let u-boot pick the proper dtb during boot.
As for IMAGE_BOOT_FILES, you can tell wic to automatically rename files by passing the desired name after a semicolon like this:
IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb;mx6ul-14x14-evk.dtb"
--
Maciej Borzęcki
Senior Software Engineer at Open-RnD Sp. z o.o.
www.open-rnd.pl, Facebook, Twitter
Quoted 36 lines · Maciej Borzecki
Quoted 26 lines
Dnia 10 luty 2016 o 17:16 Oliver Graute <[email protected]> napisał(a):
Hello list,
if I try to boot from my yocto generated SD-card image my u-boot can't start the kernel because the imx6ul-14x14-evk.dtb is missing.
reading boot.scr
** Unable to read file boot.scr **
reading zImage
5072288 bytes read in 328 ms (14.7 MiB/s)
Booting from mmc ...
reading imx6ul-14x14-evk.dtb
** Unable to read file imx6ul-14x14-evk.dtb **
Kernel image @0x82000000[0x000000-0x4d65a0]Starting kernel ...
In my /boot folder I saw a dtb file, but the filename is a bit different.
zImage-imx6ul-14x14-evk.dtb instead of imx6ul-14x14-evk.dtb
Quoted 9 lines
So I changed these filename manually and my Image is booting.
mv zImage-imx6ul-14x14-evk.dtb imx6ul-14x14-evk.dtb »zImage-imx6ul-14x14-evk.dtb“ -> »imx6ul-14x14-evk.dtb“
What is the right way to define these dtb filename?
some ideas whats going wrong here?
Quoted 7 lines
IIRC the usual way was to add kernel-devicetree package and let u-boot pick the proper dtb during boot.
As for
IMAGE_BOOT_FILES, you can tell wic to automatically rename files by passing the desired name after a semicolon like this:
IMAGE_BOOT_FILES= "zImage zImage-imx6ul-14x14-evk.dtb;mx6ul-14x14-evk.dtb"
ok that worked for me, I changed it like this
-IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb" +IMAGE_BOOT_FILES = "zImage zImage-imx6ul-14x14-evk.dtb;imx6ul-14x14-evk.dtb"
now the Image is directly booting without manually renaming.
thx for your help
Best Rgeards,
Oliver