x86/platform changes for v4.8
Subsystems (12)
Linus,
Please pull the latest x86-platform-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-platform-for-linus
# HEAD: 05f310e26fe9d97fec0ce1752edc16bf1ea55a2d x86/sfi: Enable enumeration of SD devices
The main changes in this cycle were:
- Intel-SoC enhancements (Andy Shevchenko)
- Intel CPU symbolic model definition rework (Dave Hansen)
- ... other misc changes.
out-of-topic modifications in x86-platform-for-linus:
-------------------------------------------------------
drivers/acpi/acpi_lpss.c # 4626d840a1e0: x86/acpi/lss: Use Intel fami
drivers/cpufreq/intel_pstate.c # 5b20c944882c: x86/cpufreq: Use Intel famil
drivers/idle/intel_idle.c # db73c5a8c80d: x86/intel_idle: Use Intel fa
drivers/mmc/host/sdhci-acpi.c # 8ba4cb53129c: x86, mmc: Use Intel family n
drivers/pci/Makefile # 5823d0893ec2: x86/platform/intel-mid: Add
drivers/pci/pci-mid.c # 5823d0893ec2: x86/platform/intel-mid: Add
drivers/platform/x86/intel_telemetry_debugfs.c# 678dec00a475: x86/intel_telemetry: Use Int
drivers/platform/x86/intel_telemetry_pltdrv.c# 678dec00a475: x86/intel_telemetry: Use Int
drivers/powercap/intel_rapl.c # d40671e30cb4: x86, powercap, rapl: Add Sky
# 0bb04b5f2c24: x86, powercap, rapl: Reorder
# 62d167330679: x86, powercap, rapl: Use Int drivers/thermal/intel_soc_dts_thermal.c# ce53da02ebfb: x86, thermal: Clean up and f
include/linux/sfi.h # 05f310e26fe9: x86/sfi: Enable enumeration
Thanks,
Ingo
------------------>
Andy Shevchenko (13):
x86/platform/intel_mid_pci: Rework IRQ0 workaround x86/platform/atom/punit: Enable support for Merrifield x86/platform/intel-mid: Add Power Management Unit driver x86/platform/intel-mid: Enable GPIO expanders on Edison x86/platform/intel-mid: Add pinctrl for Intel Merrifield x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code x86/platform/intel-mid: Extend PWRMU to support Penwell x86/platform/intel-mid: Enable spidev on Intel Edison boards x86/platform/intel-mid: Rename mrfl.c to mrfld.c x86/platform/intel-mid: Mark regulators explicitly defined x86/platform/intel-mid: Make vertical indentation consistent x86/pci: Use MRFLD abbreviation for Merrifield
x86/sfi: Enable enumeration of SD devices
Borislav Petkov (1):
x86/cpu: Correct comments and messages in P4 erratum 037 handling code
Dave Hansen (10):
x86, powercap, rapl: Use Intel model macros intead of open-coding x86, powercap, rapl: Reorder CPU detection table
x86, powercap, rapl: Add Skylake Server model number x86/intel_idle: Use Intel family macros for intel_idle x86/platform: Use new Intel model number macros
x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver x86/intel_telemetry: Use Intel family name macros for telemetry driver x86, mmc: Use Intel family name macros for mmc driver
x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal
Sudeep Holla (1):
x86/topology: Remove redundant ENABLE_TOPO_DEFINES
arch/x86/include/asm/intel-mid.h | 88 +++--
arch/x86/include/asm/topology.h | 12 +-
arch/x86/kernel/cpu/intel.c | 7 +-
arch/x86/pci/intel_mid_pci.c | 51 ++-
arch/x86/platform/atom/punit_atom_debug.c | 20 +-
arch/x86/platform/intel-mid/Makefile | 2 +-
arch/x86/platform/intel-mid/device_libs/Makefile | 10 +-
.../intel-mid/device_libs/platform_mrfld_pinctrl.c | 43 +++
.../intel-mid/device_libs/platform_pcal9555a.c | 99 +++++
.../intel-mid/device_libs/platform_spidev.c | 50 +++
arch/x86/platform/intel-mid/intel-mid.c | 10 +
arch/x86/platform/intel-mid/{mrfl.c => mrfld.c} | 2 +-
arch/x86/platform/intel-mid/pwr.c | 418 +++++++++++++++++++++
arch/x86/platform/intel-mid/sfi.c | 29 ++
drivers/acpi/acpi_lpss.c | 5 +-
drivers/cpufreq/intel_pstate.c | 37 +-
drivers/idle/intel_idle.c | 71 ++--
drivers/mmc/host/sdhci-acpi.c | 3 +-
drivers/pci/Makefile | 3 +
drivers/pci/pci-mid.c | 77 ++++
drivers/platform/x86/intel_telemetry_debugfs.c | 3 +-
drivers/platform/x86/intel_telemetry_pltdrv.c | 3 +-
drivers/powercap/intel_rapl.c | 50 +--
drivers/thermal/intel_soc_dts_thermal.c | 4 +-
include/linux/sfi.h | 1 +
25 files changed, 955 insertions(+), 143 deletions(-)
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c
create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_spidev.c
rename arch/x86/platform/intel-mid/{mrfl.c => mrfld.c} (97%)
create mode 100644 arch/x86/platform/intel-mid/pwr.c
create mode 100644 drivers/pci/pci-mid.carch/x86/include/asm/intel-mid.h +57 -31
@@ -12,9 +12,17 @@#define _ASM_X86_INTEL_MID_H#include <linux/sfi.h> +#include <linux/pci.h> #include <linux/platform_device.h> extern int intel_mid_pci_init (void ); +extern int intel_mid_pci_set_power_state (struct pci_dev *pdev,pci_power_t state); + +#define INTEL_MID_PWR_LSS_OFFSET 4 +#define INTEL_MID_PWR_LSS_TYPE (1 << 7) + +extern int intel_mid_pwr_get_lss_id (struct pci_dev *pdev); +extern int get_gpio_by_name (const char *name);extern void intel_scu_device_register (struct platform_device *pdev);extern int __init sfi_parse_mrtc (struct sfi_table_header *table);
@@ -34,13 +42,28 @@ struct devs_id {void *(*get_platform_data)(void *info);/* Custom handler for devices */ void (*device_handler)(struct sfi_device_table_entry *pentry, -struct devs_id *dev); +struct devs_id *dev); }; -#define sfi_device (i) \ - static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ +#define sfi_device (i) \ + static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i +/** +* struct mid_sd_board_info - template for SD device creation +* @name: identifies the driver +* @bus_num: board-specific identifier for a given SD controller +* @max_clk: the maximum frequency device supports +* @platform_data: the particular data stored there is driver-specific +*/ +struct mid_sd_board_info { +char name[SFI_NAME_LEN ]; +int bus_num; +unsigned short addr; +u32 max_clk; +void *platform_data; +}; +/* * Medfield is the follow-up of Moorestown, it combines two chip solution into * one. Other than that it also added always-on and constant tsc and lapic
@@ -60,7 +83,7 @@ extern enum intel_mid_cpu_type __intel_mid_cpu_chip;/** * struct intel_mid_ops - Interface between intel-mid & sub archs * @arch_setup: arch_setup function to re-initialize platform -* structures (x86_init, x86_platform_init) +* structures (x86_init, x86_platform_init) * * This structure can be extended if any new interface is required * between intel-mid & its sub arch files.
@@ -70,20 +93,20 @@ struct intel_mid_ops { };/* Helper API's for INTEL_MID_OPS_INIT */ -#define DECLARE_INTEL_MID_OPS_INIT (cpuname, cpuid) \ - [cpuid] = get_##cpuname##_ops +#define DECLARE_INTEL_MID_OPS_INIT (cpuname, cpuid) \ + [cpuid] = get_##cpuname##_ops/* Maximum number of CPU ops */ -#define MAX_CPU_OPS (a) (sizeof(a)/sizeof(void *)) +#define MAX_CPU_OPS (a) (sizeof(a)/sizeof(void *))/* * For every new cpu addition, a weak get_<cpuname>_ops() function needs be * declared in arch/x86/platform/intel_mid/intel_mid_weak_decls.h. */ -#define INTEL_MID_OPS_INIT {\ - DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \ - DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \ - DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \ +#define INTEL_MID_OPS_INIT { \ + DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \ + DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \ + DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \ };#ifdef CONFIG_X86_INTEL_MID
@@ -100,8 +123,8 @@ static inline bool intel_mid_has_msic(void)#else /* !CONFIG_X86_INTEL_MID */ -#define intel_mid_identify_cpu () (0) -#define intel_mid_has_msic () (0) +#define intel_mid_identify_cpu () 0 +#define intel_mid_has_msic () 0#endif /* !CONFIG_X86_INTEL_MID */
@@ -117,35 +140,38 @@ extern enum intel_mid_timer_options intel_mid_timer_options;* Penwell uses spread spectrum clock, so the freq number is not exactly * the same as reported by MSR based on SDM. */ -#define FSB_FREQ_83SKU 83200 -#define FSB_FREQ_100SKU 99840 -#define FSB_FREQ_133SKU 133000 +#define FSB_FREQ_83SKU 83200 +#define FSB_FREQ_100SKU 99840 +#define FSB_FREQ_133SKU 133000 -#define FSB_FREQ_167SKU 167000 -#define FSB_FREQ_200SKU 200000 -#define FSB_FREQ_267SKU 267000 -#define FSB_FREQ_333SKU 333000 -#define FSB_FREQ_400SKU 400000 +#define FSB_FREQ_167SKU 167000 +#define FSB_FREQ_200SKU 200000 +#define FSB_FREQ_267SKU 267000 +#define FSB_FREQ_333SKU 333000 +#define FSB_FREQ_400SKU 400000/* Bus Select SoC Fuse value */ -#define BSEL_SOC_FUSE_MASK 0x7 -#define BSEL_SOC_FUSE_001 0x1/* FSB 133MHz */ -#define BSEL_SOC_FUSE_101 0x5/* FSB 100MHz */ -#define BSEL_SOC_FUSE_111 0x7/* FSB 83MHz */ +#define BSEL_SOC_FUSE_MASK 0x7 +/* FSB 133MHz */ +#define BSEL_SOC_FUSE_001 0x1 +/* FSB 100MHz */ +#define BSEL_SOC_FUSE_101 0x5 +/* FSB 83MHz */ +#define BSEL_SOC_FUSE_111 0x7 -#define SFI_MTMR_MAX_NUM 8 -#define SFI_MRTC_MAX 8 +#define SFI_MTMR_MAX_NUM 8 +#define SFI_MRTC_MAX 8extern void intel_scu_devices_create (void );extern void intel_scu_devices_destroy (void );/* VRTC timer */ -#define MRST_VRTC_MAP_SZ (1024) -/*#define MRST_VRTC_PGOFFSET (0xc00) */ +#define MRST_VRTC_MAP_SZ 1024 +/* #define MRST_VRTC_PGOFFSET 0xc00 */ extern void intel_mid_rtc_init (void ); -/* the offset for the mapping of global gpio pin to irq */ -#define INTEL_MID_IRQ_OFFSET 0x100 +/* The offset for the mapping of global gpio pin to irq */ +#define INTEL_MID_IRQ_OFFSET 0x100#endif /* _ASM_X86_INTEL_MID_H */
arch/x86/include/asm/topology.h +1 -11
@@ -25,16 +25,6 @@#ifndef _ASM_X86_TOPOLOGY_H#define _ASM_X86_TOPOLOGY_H -#ifdef CONFIG_X86_32 -# ifdef CONFIG_SMP -# define ENABLE_TOPO_DEFINES -# endif -#else -# ifdef CONFIG_SMP -# define ENABLE_TOPO_DEFINES -# endif -#endif -/* * to preserve the visibility of NUMA_NO_NODE definition, * moved to there from here. May be used independent of
@@ -123,7 +113,7 @@ extern const struct cpumask *cpu_coregroup_mask(int cpu);#define topology_physical_package_id (cpu) (cpu_data(cpu).phys_proc_id)#define topology_core_id (cpu) (cpu_data(cpu).cpu_core_id) -#ifdef ENABLE_TOPO_DEFINES +#ifdef CONFIG_SMP #define topology_core_cpumask (cpu) (per_cpu(cpu_core_map, cpu))#define topology_sibling_cpumask (cpu) (per_cpu(cpu_sibling_map, cpu))
arch/x86/kernel/cpu/intel.c +3 -4
@@ -300,15 +300,14 @@ static void intel_workarounds(struct cpuinfo_x86 *c) }/* -* P4 Xeon errata 037 workaround. +* P4 Xeon erratum 037 workaround. * Hardware prefetcher may cause stale data to be loaded into the cache. */ if ((c->x86 ==15 ) && (c->x86_model ==1 ) && (c->x86_mask ==1 )) {if (msr_set_bit (MSR_IA32_MISC_ENABLE , -MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT ) - >0 ) { +MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT ) >0 ) {pr_info ("CPU: C0 stepping P4 Xeon detected.\n" ); -pr_info ("CPU: Disabling hardware prefetching (Errata 037)\n" ); +pr_info ("CPU: Disabling hardware prefetching (Erratum 037)\n" ); } }
arch/x86/pci/intel_mid_pci.c +42 -9
76 lines not on this page · raw message
arch/x86/platform/atom/punit_atom_debug.c +16 -4
@@ -23,10 +23,9 @@#include <linux/seq_file.h> #include <linux/io.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/iosf_mbi.h> -/* Power gate status reg */ -#define PWRGT_STATUS 0x61/* Subsystem config/status Video processor */ #define VED_SS_PM0 0x32/* Subsystem config/status ISP (Image Signal Processor) */
@@ -35,12 +34,16 @@#define MIO_SS_PM 0x3B/* Shift bits for getting status for video, isp and i/o */ #define SSS_SHIFT 24 + +/* Power gate status reg */ +#define PWRGT_STATUS 0x61/* Shift bits for getting status for graphics rendering */ #define RENDER_POS 0/* Shift bits for getting status for media control */ #define MEDIA_POS 2/* Shift bits for getting status for Valley View/Baytrail display */ #define VLV_DISPLAY_POS 6 +/* Subsystem config/status display for Cherry Trail SOC */ #define CHT_DSP_SSS 0x36/* Shift bits for getting status for display */
@@ -52,6 +55,14 @@ struct punit_device {int sss_pos; }; +static const struct punit_device punit_device_tng[] = { + {"DISPLAY" ,CHT_DSP_SSS ,SSS_SHIFT }, + {"VED" ,VED_SS_PM0 ,SSS_SHIFT }, + {"ISP" ,ISP_SS_PM0 ,SSS_SHIFT }, + {"MIO" ,MIO_SS_PM ,SSS_SHIFT }, + {NULL } +}; +static const struct punit_device punit_device_byt[] = { {"GFX RENDER" ,PWRGT_STATUS ,RENDER_POS }, {"GFX MEDIA" ,PWRGT_STATUS ,MEDIA_POS },
@@ -143,8 +154,9 @@ static void punit_dbgfs_unregister(void) (kernel_ulong_t)&drv_data }static const struct x86_cpu_id intel_punit_cpu_ids[] = { -ICPU (55 , punit_device_byt),/* Valleyview, Bay Trail */ -ICPU (76 , punit_device_cht),/* Braswell, Cherry Trail */ +ICPU (INTEL_FAM6_ATOM_SILVERMONT1 , punit_device_byt), +ICPU (INTEL_FAM6_ATOM_MERRIFIELD1 , punit_device_tng), +ICPU (INTEL_FAM6_ATOM_AIRMONT , punit_device_cht), {} };
arch/x86/platform/intel-mid/Makefile +1 -1
@@ -1,4 +1,4 @@ -obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o +obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfld.o pwr.o # SFI specific code ifdef CONFIG_X86_INTEL_MID
arch/x86/platform/intel-mid/device_libs/Makefile +8 -2
@@ -1,3 +1,5 @@ +# Family-Level Interface Shim (FLIS) +obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o # IPC Devices obj-y += platform_ipc.o obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o
@@ -8,14 +10,18 @@ obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o +# SPI Devices +obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_spidev.o # I2C Devices obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o -obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o -obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o +# I2C GPIO Expanders +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o # MISC Devices obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_wdt.o
arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c new file +43 -0
43 lines not on this page · raw message
arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c new file +99 -0
99 lines not on this page · raw message
arch/x86/platform/intel-mid/device_libs/platform_spidev.c new file +50 -0
50 lines not on this page · raw message
arch/x86/platform/intel-mid/intel-mid.c +10 -0
@@ -16,6 +16,7 @@#include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/regulator/machine.h> #include <linux/scatterlist.h> #include <linux/sfi.h> #include <linux/irq.h>
@@ -144,6 +145,15 @@ static void intel_mid_arch_setup(void) out:if (intel_mid_ops->arch_setup) intel_mid_ops->arch_setup (); + +/* +* Intel MID platforms are using explicitly defined regulators. +* +* Let the regulator core know that we do not have any additional +* regulators left. This lets it substitute unprovided regulators with +* dummy ones: +*/ +regulator_has_full_constraints (); }/* MID systems don't have i8042 controller */
arch/x86/platform/intel-mid/mrfld.c renamed from arch/x86/platform/intel-mid/mrfl.c +1 -1
@@ -1,5 +1,5 @@/* -* mrfl.c: Intel Merrifield platform specific setup code +* Intel Merrifield platform specific setup code * * (C) Copyright 2013 Intel Corporation *
arch/x86/platform/intel-mid/pwr.c new file +418 -0
418 lines not on this page · raw message
arch/x86/platform/intel-mid/sfi.c +29 -0
@@ -407,6 +407,32 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,i2c_register_board_info (pentry->host_num, &i2c_info,1 ); } +static void __init sfi_handle_sd_dev (struct sfi_device_table_entry *pentry, +struct devs_id *dev) +{ +struct mid_sd_board_info sd_info; +void *pdata; + +memset (&sd_info,0 ,sizeof (sd_info)); +strncpy (sd_info.name, pentry->name,SFI_NAME_LEN ); + sd_info.bus_num = pentry->host_num; + sd_info.max_clk = pentry->max_freq; + sd_info.addr = pentry->addr; +pr_debug ("SD bus = %d, name = %16.16s, max_clk = %d, addr = 0x%x\n" , + sd_info.bus_num, + sd_info.name, + sd_info.max_clk, + sd_info.addr); + pdata =intel_mid_sfi_get_pdata (dev, &sd_info); +if (IS_ERR (pdata)) +return ; + +/* Nothing we can do with this for now */ + sd_info.platform_data = pdata; + +pr_debug ("Successfully registered %16.16s" , sd_info.name); +} +extern struct devs_id *const __x86_intel_mid_dev_start[], *const __x86_intel_mid_dev_end[];
@@ -490,6 +516,9 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)case SFI_DEV_TYPE_I2C :sfi_handle_i2c_dev (pentry, dev);break ; +case SFI_DEV_TYPE_SD : +sfi_handle_sd_dev (pentry, dev); +break ;case SFI_DEV_TYPE_UART :case SFI_DEV_TYPE_HSI :default :
drivers/acpi/acpi_lpss.c +3 -2
@@ -29,6 +29,7 @@ ACPI_MODULE_NAME("acpi_lpss");#ifdef CONFIG_X86_INTEL_LPSS #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/iosf_mbi.h> #include <asm/pmc_atom.h>
@@ -229,8 +230,8 @@ static const struct lpss_device_desc bsw_spi_dev_desc = {#define ICPU (model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }static const struct x86_cpu_id lpss_cpu_ids[] = { -ICPU (0x37 ),/* Valleyview, Bay Trail */ -ICPU (0x4c ),/* Braswell, Cherry Trail */ +ICPU (INTEL_FAM6_ATOM_SILVERMONT1 ),/* Valleyview, Bay Trail */ +ICPU (INTEL_FAM6_ATOM_AIRMONT ),/* Braswell, Cherry Trail */ {} };
drivers/cpufreq/intel_pstate.c +19 -18
@@ -35,6 +35,7 @@#include <asm/msr.h> #include <asm/cpu_device_id.h> #include <asm/cpufeature.h> +#include <asm/intel-family.h> #define ATOM_RATIOS 0x66a#define ATOM_VIDS 0x66b
@@ -1352,29 +1353,29 @@ static void intel_pstate_update_util(struct update_util_data *data, u64 time, (unsigned long)&policy }static const struct x86_cpu_id intel_pstate_cpu_ids[] = { -ICPU (0x2a , core_params), -ICPU (0x2d , core_params), -ICPU (0x37 , silvermont_params), -ICPU (0x3a , core_params), -ICPU (0x3c , core_params), -ICPU (0x3d , core_params), -ICPU (0x3e , core_params), -ICPU (0x3f , core_params), -ICPU (0x45 , core_params), -ICPU (0x46 , core_params), -ICPU (0x47 , core_params), -ICPU (0x4c , airmont_params), -ICPU (0x4e , core_params), -ICPU (0x4f , core_params), -ICPU (0x5e , core_params), -ICPU (0x56 , core_params), -ICPU (0x57 , knl_params), +ICPU (INTEL_FAM6_SANDYBRIDGE , core_params), +ICPU (INTEL_FAM6_SANDYBRIDGE_X , core_params), +ICPU (INTEL_FAM6_ATOM_SILVERMONT1 , silvermont_params), +ICPU (INTEL_FAM6_IVYBRIDGE , core_params), +ICPU (INTEL_FAM6_HASWELL_CORE , core_params), +ICPU (INTEL_FAM6_BROADWELL_CORE , core_params), +ICPU (INTEL_FAM6_IVYBRIDGE_X , core_params), +ICPU (INTEL_FAM6_HASWELL_X , core_params), +ICPU (INTEL_FAM6_HASWELL_ULT , core_params), +ICPU (INTEL_FAM6_HASWELL_GT3E , core_params), +ICPU (INTEL_FAM6_BROADWELL_GT3E , core_params), +ICPU (INTEL_FAM6_ATOM_AIRMONT , airmont_params), +ICPU (INTEL_FAM6_SKYLAKE_MOBILE , core_params), +ICPU (INTEL_FAM6_BROADWELL_X , core_params), +ICPU (INTEL_FAM6_SKYLAKE_DESKTOP , core_params), +ICPU (INTEL_FAM6_BROADWELL_XEON_D , core_params), +ICPU (INTEL_FAM6_XEON_PHI_KNL , knl_params), {} };MODULE_DEVICE_TABLE (x86cpu, intel_pstate_cpu_ids);static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] = { -ICPU (0x56 , core_params), +ICPU (INTEL_FAM6_BROADWELL_XEON_D , core_params), {} };
drivers/idle/intel_idle.c +36 -35
93 lines not on this page · raw message
drivers/mmc/host/sdhci-acpi.c +2 -1
@@ -43,6 +43,7 @@#ifdef CONFIG_X86 #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/iosf_mbi.h> #endif
@@ -126,7 +127,7 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_int = {static bool sdhci_acpi_byt (void ) {static const struct x86_cpu_id byt[] = { - {X86_VENDOR_INTEL ,6 ,0x37 }, + {X86_VENDOR_INTEL ,6 ,INTEL_FAM6_ATOM_SILVERMONT1 }, {} };
drivers/pci/Makefile +3 -0
@@ -51,6 +51,9 @@ obj-$(CONFIG_ACPI) += pci-acpi.o # SMBIOS provided firmware instance and labels obj-$(CONFIG_PCI_LABEL) += pci-label.o +# Intel MID platform PM support +obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o + obj-$(CONFIG_PCI_SYSCALL) += syscall.o obj-$(CONFIG_PCI_STUB) += pci-stub.o
drivers/pci/pci-mid.c new file +77 -0
77 lines not on this page · raw message
drivers/platform/x86/intel_telemetry_debugfs.c +2 -1
@@ -32,6 +32,7 @@#include <linux/suspend.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/intel_pmc_ipc.h> #include <asm/intel_punit_ipc.h> #include <asm/intel_telemetry.h>
@@ -331,7 +332,7 @@ static struct telemetry_debugfs_conf telem_apl_debugfs_conf = { };static const struct x86_cpu_id telemetry_debugfs_cpu_ids[] = { -TELEM_DEBUGFS_CPU (0x5c , telem_apl_debugfs_conf), +TELEM_DEBUGFS_CPU (INTEL_FAM6_ATOM_GOLDMONT , telem_apl_debugfs_conf), {} };
drivers/platform/x86/intel_telemetry_pltdrv.c +2 -1
@@ -28,6 +28,7 @@#include <linux/platform_device.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/intel_pmc_ipc.h> #include <asm/intel_punit_ipc.h> #include <asm/intel_telemetry.h>
@@ -163,7 +164,7 @@ static struct telemetry_plt_config telem_apl_config = { };static const struct x86_cpu_id telemetry_cpu_ids[] = { -TELEM_CPU (0x5c , telem_apl_config), +TELEM_CPU (INTEL_FAM6_ATOM_GOLDMONT , telem_apl_config), {} };
drivers/powercap/intel_rapl.c +29 -21
62 lines not on this page · raw message
drivers/thermal/intel_soc_dts_thermal.c +3 -1
@@ -18,6 +18,7 @@#include <linux/module.h> #include <linux/interrupt.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include "intel_soc_dts_iosf.h" #define CRITICAL_OFFSET_FROM_TJ_MAX 5000
@@ -42,7 +43,8 @@ static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data) }static const struct x86_cpu_id soc_thermal_ids[] = { - {X86_VENDOR_INTEL ,X86_FAMILY_ANY ,0x37 ,0 ,BYT_SOC_DTS_APIC_IRQ }, + {X86_VENDOR_INTEL ,6 ,INTEL_FAM6_ATOM_SILVERMONT1 ,0 , +BYT_SOC_DTS_APIC_IRQ }, {} };MODULE_DEVICE_TABLE (x86cpu, soc_thermal_ids);
include/linux/sfi.h +1 -0
@@ -156,6 +156,7 @@ struct sfi_device_table_entry {#define SFI_DEV_TYPE_UART 2#define SFI_DEV_TYPE_HSI 3#define SFI_DEV_TYPE_IPC 4 +#define SFI_DEV_TYPE_SD 5u8 host_num;/* attached to host 0, 1...*/ u16 addr;