Skip to contentSkip to conversation

x86/platform changes for v4.8

GIT PULL Ingo Molnar 1 participant 1 message Jul 25, 2016

Subsystems (12)
x86 ACPI PCI MMC, SD and SDIO +8 more subsystems
lore
Share & tools
lore
#0 lore raw

Linus,

Please pull the latest x86-platform-for-linus git tree from:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-platform-for-linus

# HEAD: 05f310e26fe9d97fec0ce1752edc16bf1ea55a2d x86/sfi: Enable enumeration of SD devices

The main changes in this cycle were:

- Intel-SoC enhancements (Andy Shevchenko)

- Intel CPU symbolic model definition rework (Dave Hansen)

- ... other misc changes.

out-of-topic modifications in x86-platform-for-linus:
-------------------------------------------------------

  drivers/acpi/acpi_lpss.c           # 4626d840a1e0: x86/acpi/lss: Use Intel fami
  drivers/cpufreq/intel_pstate.c     # 5b20c944882c: x86/cpufreq: Use Intel famil
  drivers/idle/intel_idle.c          # db73c5a8c80d: x86/intel_idle: Use Intel fa
  drivers/mmc/host/sdhci-acpi.c      # 8ba4cb53129c: x86, mmc: Use Intel family n
  drivers/pci/Makefile               # 5823d0893ec2: x86/platform/intel-mid: Add 
  drivers/pci/pci-mid.c              # 5823d0893ec2: x86/platform/intel-mid: Add 
  drivers/platform/x86/intel_telemetry_debugfs.c# 678dec00a475: x86/intel_telemetry: Use Int
  drivers/platform/x86/intel_telemetry_pltdrv.c# 678dec00a475: x86/intel_telemetry: Use Int
  drivers/powercap/intel_rapl.c      # d40671e30cb4: x86, powercap, rapl: Add Sky
                                   # 0bb04b5f2c24: x86, powercap, rapl: Reorder
                                   # 62d167330679: x86, powercap, rapl: Use Int

drivers/thermal/intel_soc_dts_thermal.c# ce53da02ebfb: x86, thermal: Clean up and f
include/linux/sfi.h # 05f310e26fe9: x86/sfi: Enable enumeration

Thanks,

Ingo

------------------>
Andy Shevchenko (13):
x86/platform/intel_mid_pci: Rework IRQ0 workaround x86/platform/atom/punit: Enable support for Merrifield x86/platform/intel-mid: Add Power Management Unit driver x86/platform/intel-mid: Enable GPIO expanders on Edison x86/platform/intel-mid: Add pinctrl for Intel Merrifield x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code x86/platform/intel-mid: Extend PWRMU to support Penwell x86/platform/intel-mid: Enable spidev on Intel Edison boards x86/platform/intel-mid: Rename mrfl.c to mrfld.c x86/platform/intel-mid: Mark regulators explicitly defined x86/platform/intel-mid: Make vertical indentation consistent x86/pci: Use MRFLD abbreviation for Merrifield
x86/sfi: Enable enumeration of SD devices

Borislav Petkov (1):
x86/cpu: Correct comments and messages in P4 erratum 037 handling code

Dave Hansen (10):
x86, powercap, rapl: Use Intel model macros intead of open-coding x86, powercap, rapl: Reorder CPU detection table
x86, powercap, rapl: Add Skylake Server model number x86/intel_idle: Use Intel family macros for intel_idle x86/platform: Use new Intel model number macros
x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver x86/intel_telemetry: Use Intel family name macros for telemetry driver x86, mmc: Use Intel family name macros for mmc driver
x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal

Sudeep Holla (1):
x86/topology: Remove redundant ENABLE_TOPO_DEFINES

 arch/x86/include/asm/intel-mid.h                   |  88 +++--
 arch/x86/include/asm/topology.h                    |  12 +-
 arch/x86/kernel/cpu/intel.c                        |   7 +-
 arch/x86/pci/intel_mid_pci.c                       |  51 ++-
 arch/x86/platform/atom/punit_atom_debug.c          |  20 +-
 arch/x86/platform/intel-mid/Makefile               |   2 +-
 arch/x86/platform/intel-mid/device_libs/Makefile   |  10 +-
 .../intel-mid/device_libs/platform_mrfld_pinctrl.c |  43 +++
 .../intel-mid/device_libs/platform_pcal9555a.c     |  99 +++++
 .../intel-mid/device_libs/platform_spidev.c        |  50 +++
 arch/x86/platform/intel-mid/intel-mid.c            |  10 +
 arch/x86/platform/intel-mid/{mrfl.c => mrfld.c}    |   2 +-
 arch/x86/platform/intel-mid/pwr.c                  | 418 +++++++++++++++++++++
 arch/x86/platform/intel-mid/sfi.c                  |  29 ++
 drivers/acpi/acpi_lpss.c                           |   5 +-
 drivers/cpufreq/intel_pstate.c                     |  37 +-
 drivers/idle/intel_idle.c                          |  71 ++--
 drivers/mmc/host/sdhci-acpi.c                      |   3 +-
 drivers/pci/Makefile                               |   3 +
 drivers/pci/pci-mid.c                              |  77 ++++
 drivers/platform/x86/intel_telemetry_debugfs.c     |   3 +-
 drivers/platform/x86/intel_telemetry_pltdrv.c      |   3 +-
 drivers/powercap/intel_rapl.c                      |  50 +--
 drivers/thermal/intel_soc_dts_thermal.c            |   4 +-
 include/linux/sfi.h                                |   1 +
 25 files changed, 955 insertions(+), 143 deletions(-)
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c
 create mode 100644 arch/x86/platform/intel-mid/device_libs/platform_spidev.c
 rename arch/x86/platform/intel-mid/{mrfl.c => mrfld.c} (97%)
 create mode 100644 arch/x86/platform/intel-mid/pwr.c
 create mode 100644 drivers/pci/pci-mid.c
arch/x86/include/asm/intel-mid.h +57 -31
index 7c5af123bdbd..9d6b097aa73d 100644
@@ -12,9 +12,17 @@
 #define _ASM_X86_INTEL_MID_H
 
 #include <linux/sfi.h>
+#include <linux/pci.h>
 #include <linux/platform_device.h>
 
 extern int intel_mid_pci_init(void);
+extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state);
+
+#define INTEL_MID_PWR_LSS_OFFSET	4
+#define INTEL_MID_PWR_LSS_TYPE		(1 << 7)
+
+extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev);
+
 extern int get_gpio_by_name(const char *name);
 extern void intel_scu_device_register(struct platform_device *pdev);
 extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
@@ -34,13 +42,28 @@ struct devs_id {
 	void *(*get_platform_data)(void *info);
 	/* Custom handler for devices */
 	void (*device_handler)(struct sfi_device_table_entry *pentry,
-				struct devs_id *dev);
+			       struct devs_id *dev);
 };
 
-#define sfi_device(i)   \
-	static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \
+#define sfi_device(i)								\
+	static const struct devs_id *const __intel_mid_sfi_##i##_dev __used	\
 	__attribute__((__section__(".x86_intel_mid_dev.init"))) = &i
 
+/**
+* struct mid_sd_board_info - template for SD device creation
+* @name:		identifies the driver
+* @bus_num:		board-specific identifier for a given SD controller
+* @max_clk:		the maximum frequency device supports
+* @platform_data:	the particular data stored there is driver-specific
+*/
+struct mid_sd_board_info {
+	char		name[SFI_NAME_LEN];
+	int		bus_num;
+	unsigned short	addr;
+	u32		max_clk;
+	void		*platform_data;
+};
+
 /*
  * Medfield is the follow-up of Moorestown, it combines two chip solution into
  * one. Other than that it also added always-on and constant tsc and lapic
@@ -60,7 +83,7 @@ extern enum intel_mid_cpu_type __intel_mid_cpu_chip;
 /**
  * struct intel_mid_ops - Interface between intel-mid & sub archs
  * @arch_setup: arch_setup function to re-initialize platform
- *             structures (x86_init, x86_platform_init)
+ *		structures (x86_init, x86_platform_init)
  *
  * This structure can be extended if any new interface is required
  * between intel-mid & its sub arch files.
@@ -70,20 +93,20 @@ struct intel_mid_ops {
 };
 
 /* Helper API's for INTEL_MID_OPS_INIT */
-#define DECLARE_INTEL_MID_OPS_INIT(cpuname, cpuid)	\
-				[cpuid] = get_##cpuname##_ops
+#define DECLARE_INTEL_MID_OPS_INIT(cpuname, cpuid)				\
+	[cpuid] = get_##cpuname##_ops
 
 /* Maximum number of CPU ops */
-#define MAX_CPU_OPS(a) (sizeof(a)/sizeof(void *))
+#define MAX_CPU_OPS(a)			(sizeof(a)/sizeof(void *))
 
 /*
  * For every new cpu addition, a weak get_<cpuname>_ops() function needs be
  * declared in arch/x86/platform/intel_mid/intel_mid_weak_decls.h.
  */
-#define INTEL_MID_OPS_INIT {\
-	DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \
-	DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \
-	DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \
+#define INTEL_MID_OPS_INIT {							\
+	DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL),	\
+	DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW),	\
+	DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER)		\
 };
 
 #ifdef CONFIG_X86_INTEL_MID
@@ -100,8 +123,8 @@ static inline bool intel_mid_has_msic(void)
 
 #else /* !CONFIG_X86_INTEL_MID */
 
-#define intel_mid_identify_cpu()    (0)
-#define intel_mid_has_msic()    (0)
+#define intel_mid_identify_cpu()	0
+#define intel_mid_has_msic()		0
 
 #endif /* !CONFIG_X86_INTEL_MID */
 
@@ -117,35 +140,38 @@ extern enum intel_mid_timer_options intel_mid_timer_options;
  * Penwell uses spread spectrum clock, so the freq number is not exactly
  * the same as reported by MSR based on SDM.
  */
-#define FSB_FREQ_83SKU	83200
-#define FSB_FREQ_100SKU	99840
-#define FSB_FREQ_133SKU	133000
+#define FSB_FREQ_83SKU			83200
+#define FSB_FREQ_100SKU			99840
+#define FSB_FREQ_133SKU			133000
 
-#define FSB_FREQ_167SKU	167000
-#define FSB_FREQ_200SKU	200000
-#define FSB_FREQ_267SKU	267000
-#define FSB_FREQ_333SKU	333000
-#define FSB_FREQ_400SKU	400000
+#define FSB_FREQ_167SKU			167000
+#define FSB_FREQ_200SKU			200000
+#define FSB_FREQ_267SKU			267000
+#define FSB_FREQ_333SKU			333000
+#define FSB_FREQ_400SKU			400000
 
 /* Bus Select SoC Fuse value */
-#define BSEL_SOC_FUSE_MASK	0x7
-#define BSEL_SOC_FUSE_001	0x1 /* FSB 133MHz */
-#define BSEL_SOC_FUSE_101	0x5 /* FSB 100MHz */
-#define BSEL_SOC_FUSE_111	0x7 /* FSB 83MHz */
+#define BSEL_SOC_FUSE_MASK		0x7
+/* FSB 133MHz */
+#define BSEL_SOC_FUSE_001		0x1
+/* FSB 100MHz */
+#define BSEL_SOC_FUSE_101		0x5
+/* FSB 83MHz */
+#define BSEL_SOC_FUSE_111		0x7
 
-#define SFI_MTMR_MAX_NUM 8
-#define SFI_MRTC_MAX	8
+#define SFI_MTMR_MAX_NUM		8
+#define SFI_MRTC_MAX			8
 
 extern void intel_scu_devices_create(void);
 extern void intel_scu_devices_destroy(void);
 
 /* VRTC timer */
-#define MRST_VRTC_MAP_SZ	(1024)
-/*#define MRST_VRTC_PGOFFSET	(0xc00) */
+#define MRST_VRTC_MAP_SZ		1024
+/* #define MRST_VRTC_PGOFFSET		0xc00 */
 
 extern void intel_mid_rtc_init(void);
 
-/* the offset for the mapping of global gpio pin to irq */
-#define INTEL_MID_IRQ_OFFSET 0x100
+/* The offset for the mapping of global gpio pin to irq */
+#define INTEL_MID_IRQ_OFFSET		0x100
 
 #endif /* _ASM_X86_INTEL_MID_H */
arch/x86/include/asm/topology.h +1 -11
index 7f991bd5031b..c9a4ed73aef4 100644
@@ -25,16 +25,6 @@
 #ifndef _ASM_X86_TOPOLOGY_H
 #define _ASM_X86_TOPOLOGY_H
 
-#ifdef CONFIG_X86_32
-# ifdef CONFIG_SMP
-#  define ENABLE_TOPO_DEFINES
-# endif
-#else
-# ifdef CONFIG_SMP
-#  define ENABLE_TOPO_DEFINES
-# endif
-#endif
-
 /*
  * to preserve the visibility of NUMA_NO_NODE definition,
  * moved to there from here.  May be used independent of
@@ -123,7 +113,7 @@ extern const struct cpumask *cpu_coregroup_mask(int cpu);
 #define topology_physical_package_id(cpu)	(cpu_data(cpu).phys_proc_id)
 #define topology_core_id(cpu)			(cpu_data(cpu).cpu_core_id)
 
-#ifdef ENABLE_TOPO_DEFINES
+#ifdef CONFIG_SMP
 #define topology_core_cpumask(cpu)		(per_cpu(cpu_core_map, cpu))
 #define topology_sibling_cpumask(cpu)		(per_cpu(cpu_sibling_map, cpu))
 
arch/x86/kernel/cpu/intel.c +3 -4
index 6e2ffbebbcdb..c1a89bc026ac 100644
@@ -300,15 +300,14 @@ static void intel_workarounds(struct cpuinfo_x86 *c)
 	}
 
 	/*
-	 * P4 Xeon errata 037 workaround.
+	 * P4 Xeon erratum 037 workaround.
 	 * Hardware prefetcher may cause stale data to be loaded into the cache.
 	 */
 	if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
 		if (msr_set_bit(MSR_IA32_MISC_ENABLE,
-				MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT)
-		    > 0) {
+				MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT) > 0) {
 			pr_info("CPU: C0 stepping P4 Xeon detected.\n");
-			pr_info("CPU: Disabling hardware prefetching (Errata 037)\n");
+			pr_info("CPU: Disabling hardware prefetching (Erratum 037)\n");
 		}
 	}
 
arch/x86/pci/intel_mid_pci.c +42 -9

76 lines not on this page · raw message

arch/x86/platform/atom/punit_atom_debug.c +16 -4
index 81c769e80614..8ff7b9355416 100644
@@ -23,10 +23,9 @@
 #include <linux/seq_file.h>
 #include <linux/io.h>
 #include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
 #include <asm/iosf_mbi.h>
 
-/* Power gate status reg */
-#define PWRGT_STATUS		0x61
 /* Subsystem config/status Video processor */
 #define VED_SS_PM0		0x32
 /* Subsystem config/status ISP (Image Signal Processor) */
@@ -35,12 +34,16 @@
 #define MIO_SS_PM		0x3B
 /* Shift bits for getting status for video, isp and i/o */
 #define SSS_SHIFT		24
+
+/* Power gate status reg */
+#define PWRGT_STATUS		0x61
 /* Shift bits for getting status for graphics rendering */
 #define RENDER_POS		0
 /* Shift bits for getting status for media control */
 #define MEDIA_POS		2
 /* Shift bits for getting status for Valley View/Baytrail display */
 #define VLV_DISPLAY_POS		6
+
 /* Subsystem config/status display for Cherry Trail SOC */
 #define CHT_DSP_SSS		0x36
 /* Shift bits for getting status for display */
@@ -52,6 +55,14 @@ struct punit_device {
 	int sss_pos;
 };
 
+static const struct punit_device punit_device_tng[] = {
+	{ "DISPLAY",	CHT_DSP_SSS,	SSS_SHIFT },
+	{ "VED",	VED_SS_PM0,	SSS_SHIFT },
+	{ "ISP",	ISP_SS_PM0,	SSS_SHIFT },
+	{ "MIO",	MIO_SS_PM,	SSS_SHIFT },
+	{ NULL }
+};
+
 static const struct punit_device punit_device_byt[] = {
 	{ "GFX RENDER",	PWRGT_STATUS,	RENDER_POS },
 	{ "GFX MEDIA",	PWRGT_STATUS,	MEDIA_POS },
@@ -143,8 +154,9 @@ static void punit_dbgfs_unregister(void)
 	  (kernel_ulong_t)&drv_data }
 
 static const struct x86_cpu_id intel_punit_cpu_ids[] = {
-	ICPU(55, punit_device_byt), /* Valleyview, Bay Trail */
-	ICPU(76, punit_device_cht), /* Braswell, Cherry Trail */
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT1, punit_device_byt),
+	ICPU(INTEL_FAM6_ATOM_MERRIFIELD1, punit_device_tng),
+	ICPU(INTEL_FAM6_ATOM_AIRMONT,	  punit_device_cht),
 	{}
 };
 
arch/x86/platform/intel-mid/Makefile +1 -1
index 0ce1b1913673..fa021dfab088 100644
@@ -1,4 +1,4 @@
-obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o
+obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfld.o pwr.o
 
 # SFI specific code
 ifdef CONFIG_X86_INTEL_MID
arch/x86/platform/intel-mid/device_libs/Makefile +8 -2
index 91ec9f8704bf..fc135bf70511 100644
@@ -1,3 +1,5 @@
+# Family-Level Interface Shim (FLIS)
+obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o
 # IPC Devices
 obj-y += platform_ipc.o
 obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o
@@ -8,14 +10,18 @@ obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o
 obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o
 obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o
 obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o
+# SPI Devices
+obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_spidev.o
 # I2C Devices
 obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
 obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o
 obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o
 obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
 obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
+# I2C GPIO Expanders
+obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o
+obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o
+obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
 # MISC Devices
 obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
 obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_wdt.o
arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c new file +43 -0

43 lines not on this page · raw message

arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c new file +99 -0

99 lines not on this page · raw message

arch/x86/platform/intel-mid/device_libs/platform_spidev.c new file +50 -0

50 lines not on this page · raw message

arch/x86/platform/intel-mid/intel-mid.c +10 -0
index 90bb997ed0a2..abbf49c6e9d3 100644
@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/regulator/machine.h>
 #include <linux/scatterlist.h>
 #include <linux/sfi.h>
 #include <linux/irq.h>
@@ -144,6 +145,15 @@ static void intel_mid_arch_setup(void)
 out:
 	if (intel_mid_ops->arch_setup)
 		intel_mid_ops->arch_setup();
+
+	/*
+	 * Intel MID platforms are using explicitly defined regulators.
+	 *
+	 * Let the regulator core know that we do not have any additional
+	 * regulators left. This lets it substitute unprovided regulators with
+	 * dummy ones:
+	 */
+	regulator_has_full_constraints();
 }
 
 /* MID systems don't have i8042 controller */
arch/x86/platform/intel-mid/mrfld.c renamed from arch/x86/platform/intel-mid/mrfl.c +1 -1
similarity index 97%
rename from arch/x86/platform/intel-mid/mrfl.c
rename to arch/x86/platform/intel-mid/mrfld.c
index bd1adc621781..59253db41bbc 100644
@@ -1,5 +1,5 @@
 /*
- * mrfl.c: Intel Merrifield platform specific setup code
+ * Intel Merrifield platform specific setup code
  *
  * (C) Copyright 2013 Intel Corporation
  *
arch/x86/platform/intel-mid/pwr.c new file +418 -0

418 lines not on this page · raw message

arch/x86/platform/intel-mid/sfi.c +29 -0
index 5ee360a951ce..1555672d436f 100644
@@ -407,6 +407,32 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
 		i2c_register_board_info(pentry->host_num, &i2c_info, 1);
 }
 
+static void __init sfi_handle_sd_dev(struct sfi_device_table_entry *pentry,
+					struct devs_id *dev)
+{
+	struct mid_sd_board_info sd_info;
+	void *pdata;
+
+	memset(&sd_info, 0, sizeof(sd_info));
+	strncpy(sd_info.name, pentry->name, SFI_NAME_LEN);
+	sd_info.bus_num = pentry->host_num;
+	sd_info.max_clk = pentry->max_freq;
+	sd_info.addr = pentry->addr;
+	pr_debug("SD bus = %d, name = %16.16s, max_clk = %d, addr = 0x%x\n",
+		 sd_info.bus_num,
+		 sd_info.name,
+		 sd_info.max_clk,
+		 sd_info.addr);
+	pdata = intel_mid_sfi_get_pdata(dev, &sd_info);
+	if (IS_ERR(pdata))
+		return;
+
+	/* Nothing we can do with this for now */
+	sd_info.platform_data = pdata;
+
+	pr_debug("Successfully registered %16.16s", sd_info.name);
+}
+
 extern struct devs_id *const __x86_intel_mid_dev_start[],
 		      *const __x86_intel_mid_dev_end[];
 
@@ -490,6 +516,9 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 			case SFI_DEV_TYPE_I2C:
 				sfi_handle_i2c_dev(pentry, dev);
 				break;
+			case SFI_DEV_TYPE_SD:
+				sfi_handle_sd_dev(pentry, dev);
+				break;
 			case SFI_DEV_TYPE_UART:
 			case SFI_DEV_TYPE_HSI:
 			default:
drivers/acpi/acpi_lpss.c +3 -2
index 0872d5fecb82..357a0b8f860b 100644
@@ -29,6 +29,7 @@ ACPI_MODULE_NAME("acpi_lpss");
 #ifdef CONFIG_X86_INTEL_LPSS
 
 #include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
 #include <asm/iosf_mbi.h>
 #include <asm/pmc_atom.h>
 
@@ -229,8 +230,8 @@ static const struct lpss_device_desc bsw_spi_dev_desc = {
 #define ICPU(model)	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
 
 static const struct x86_cpu_id lpss_cpu_ids[] = {
-	ICPU(0x37),	/* Valleyview, Bay Trail */
-	ICPU(0x4c),	/* Braswell, Cherry Trail */
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT1),	/* Valleyview, Bay Trail */
+	ICPU(INTEL_FAM6_ATOM_AIRMONT),	/* Braswell, Cherry Trail */
 	{}
 };
 
drivers/cpufreq/intel_pstate.c +19 -18
index ee367e9b7d2e..e1b7a5e288f9 100644
@@ -35,6 +35,7 @@
 #include <asm/msr.h>
 #include <asm/cpu_device_id.h>
 #include <asm/cpufeature.h>
+#include <asm/intel-family.h>
 
 #define ATOM_RATIOS		0x66a
 #define ATOM_VIDS		0x66b
@@ -1352,29 +1353,29 @@ static void intel_pstate_update_util(struct update_util_data *data, u64 time,
 			(unsigned long)&policy }
 
 static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
-	ICPU(0x2a, core_params),
-	ICPU(0x2d, core_params),
-	ICPU(0x37, silvermont_params),
-	ICPU(0x3a, core_params),
-	ICPU(0x3c, core_params),
-	ICPU(0x3d, core_params),
-	ICPU(0x3e, core_params),
-	ICPU(0x3f, core_params),
-	ICPU(0x45, core_params),
-	ICPU(0x46, core_params),
-	ICPU(0x47, core_params),
-	ICPU(0x4c, airmont_params),
-	ICPU(0x4e, core_params),
-	ICPU(0x4f, core_params),
-	ICPU(0x5e, core_params),
-	ICPU(0x56, core_params),
-	ICPU(0x57, knl_params),
+	ICPU(INTEL_FAM6_SANDYBRIDGE, 		core_params),
+	ICPU(INTEL_FAM6_SANDYBRIDGE_X,		core_params),
+	ICPU(INTEL_FAM6_ATOM_SILVERMONT1,	silvermont_params),
+	ICPU(INTEL_FAM6_IVYBRIDGE,		core_params),
+	ICPU(INTEL_FAM6_HASWELL_CORE,		core_params),
+	ICPU(INTEL_FAM6_BROADWELL_CORE,		core_params),
+	ICPU(INTEL_FAM6_IVYBRIDGE_X,		core_params),
+	ICPU(INTEL_FAM6_HASWELL_X,		core_params),
+	ICPU(INTEL_FAM6_HASWELL_ULT,		core_params),
+	ICPU(INTEL_FAM6_HASWELL_GT3E,		core_params),
+	ICPU(INTEL_FAM6_BROADWELL_GT3E,		core_params),
+	ICPU(INTEL_FAM6_ATOM_AIRMONT,		airmont_params),
+	ICPU(INTEL_FAM6_SKYLAKE_MOBILE,		core_params),
+	ICPU(INTEL_FAM6_BROADWELL_X,		core_params),
+	ICPU(INTEL_FAM6_SKYLAKE_DESKTOP,	core_params),
+	ICPU(INTEL_FAM6_BROADWELL_XEON_D,	core_params),
+	ICPU(INTEL_FAM6_XEON_PHI_KNL,		knl_params),
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids);
 
 static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] = {
-	ICPU(0x56, core_params),
+	ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_params),
 	{}
 };
 
drivers/idle/intel_idle.c +36 -35

93 lines not on this page · raw message

drivers/mmc/host/sdhci-acpi.c +2 -1
index 458ffb7637e5..008709c5cb09 100644
@@ -43,6 +43,7 @@
 
 #ifdef CONFIG_X86
 #include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
 #include <asm/iosf_mbi.h>
 #endif
 
@@ -126,7 +127,7 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_int = {
 static bool sdhci_acpi_byt(void)
 {
 	static const struct x86_cpu_id byt[] = {
-		{ X86_VENDOR_INTEL, 6, 0x37 },
+		{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1 },
 		{}
 	};
 
drivers/pci/Makefile +3 -0
index 1fa6925733d3..8db5079f09a7 100644
@@ -51,6 +51,9 @@ obj-$(CONFIG_ACPI)    += pci-acpi.o
 # SMBIOS provided firmware instance and labels
 obj-$(CONFIG_PCI_LABEL) += pci-label.o
 
+# Intel MID platform PM support
+obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o
+
 obj-$(CONFIG_PCI_SYSCALL) += syscall.o
 
 obj-$(CONFIG_PCI_STUB) += pci-stub.o
drivers/pci/pci-mid.c new file +77 -0

77 lines not on this page · raw message

drivers/platform/x86/intel_telemetry_debugfs.c +2 -1
index f5134acd6ff0..815a7c5e9566 100644
@@ -32,6 +32,7 @@
 #include <linux/suspend.h>
 
 #include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
 #include <asm/intel_pmc_ipc.h>
 #include <asm/intel_punit_ipc.h>
 #include <asm/intel_telemetry.h>
@@ -331,7 +332,7 @@ static struct telemetry_debugfs_conf telem_apl_debugfs_conf = {
 };
 
 static const struct x86_cpu_id telemetry_debugfs_cpu_ids[] = {
-	TELEM_DEBUGFS_CPU(0x5c, telem_apl_debugfs_conf),
+	TELEM_DEBUGFS_CPU(INTEL_FAM6_ATOM_GOLDMONT, telem_apl_debugfs_conf),
 	{}
 };
 
drivers/platform/x86/intel_telemetry_pltdrv.c +2 -1
index 09c84a2b1c2c..6d884f7d1b9f 100644
@@ -28,6 +28,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
 #include <asm/intel_pmc_ipc.h>
 #include <asm/intel_punit_ipc.h>
 #include <asm/intel_telemetry.h>
@@ -163,7 +164,7 @@ static struct telemetry_plt_config telem_apl_config = {
 };
 
 static const struct x86_cpu_id telemetry_cpu_ids[] = {
-	TELEM_CPU(0x5c, telem_apl_config),
+	TELEM_CPU(INTEL_FAM6_ATOM_GOLDMONT, telem_apl_config),
 	{}
 };
 
drivers/powercap/intel_rapl.c +29 -21

62 lines not on this page · raw message

drivers/thermal/intel_soc_dts_thermal.c +3 -1
index 4ebb31a35a64..b2bbaa1c60b0 100644
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
 #include "intel_soc_dts_iosf.h"
 
 #define CRITICAL_OFFSET_FROM_TJ_MAX	5000
@@ -42,7 +43,8 @@ static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data)
 }
 
 static const struct x86_cpu_id soc_thermal_ids[] = {
-	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, 0x37, 0, BYT_SOC_DTS_APIC_IRQ},
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1, 0,
+		BYT_SOC_DTS_APIC_IRQ},
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, soc_thermal_ids);
include/linux/sfi.h +1 -0
index d9b436f09925..e0e1597ef9e6 100644
@@ -156,6 +156,7 @@ struct sfi_device_table_entry {
 #define SFI_DEV_TYPE_UART	2
 #define SFI_DEV_TYPE_HSI	3
 #define SFI_DEV_TYPE_IPC	4
+#define SFI_DEV_TYPE_SD		5
 
 	u8	host_num;	/* attached to host 0, 1...*/
 	u16	addr;