USB: cp210x: add new IDs for GE Bx50v3 boards
Subsystems (2)
PATCH v2 1/1 USB: cp210x: add new IDs for GE Bx50v3 boards
Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design change
Signed-off-by Ken Lin <[email protected]>
---
Change in v2:
Fix the author (From) address doesn't match the SoB issue mentioned in the discussion thread
drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/serial/cp210x.c +2 -0
@@ -178,6 +178,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */ { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */ { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */ + { USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART intefrace */ + { USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
Signature · 1 line
2.11.0
Johan Hovold
maintainerQuoted 6 lines · Ken Lin
Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design change
Signed-off-by Ken Lin <[email protected]>---
Change in v2:
Fix the author (From) address doesn't match the SoB issue mentioned in the discussion thread
Now applied after fixing the "intefrace" typo and wrapping the commit message at 72 cols.
Thanks,
Johan