Skip to contentSkip to conversation

USB: cp210x: add new IDs for GE Bx50v3 boards

PATCH Superseded Ken Lin 2 participants 2 messages Feb 3, 2017

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Ken Lin

author
#0 lore raw

PATCH 1/1 USB: cp210x: add new IDs for GE Bx50v3 boards

Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design change

---
 drivers/usb/serial/cp210x.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/cp210x.c +2 -0
index fff718352e0c..691e3e5f0e61 100644
@@ -178,6 +178,8 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
 	{ USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
 	{ USB_DEVICE(0x1901, 0x0194) },	/* GE Healthcare Remote Alarm Box */
+	{ USB_DEVICE(0x1901, 0x0195) },	/* GE B850/B650/B450 CP2104 DP UART intefrace */
+	{ USB_DEVICE(0x1901, 0x0196) },	/* GE B850 CP2105 DP UART interface */
 	{ USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
Signature · 1 line
2.11.0
maintainer
#1 lore raw
Quoted 3 lines · Ken Lin

Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design change

Thanks for the patch. Looks good except that your author (From) address doesn't match your SoB. Please fix that up and resend.

Thanks,
Johan