USB: cp210x: add new IDs for GE Bx50v3 boards
Subsystems (2)
PATCH 1/1 USB: cp210x: add new IDs for GE Bx50v3 boards
Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design change
Signed-off-by Ken Lin <[email protected]>
--- drivers/usb/serial/cp210x.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/usb/serial/cp210x.c +2 -0
@@ -178,6 +178,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */ { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */ { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */ + { USB_DEVICE(0x1901, 0x0195) }, /* GE B850/B650/B450 CP2104 DP UART intefrace */ + { USB_DEVICE(0x1901, 0x0196) }, /* GE B850 CP2105 DP UART interface */ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
Signature · 1 line
2.11.0
Johan Hovold
maintainerQuoted 3 lines · Ken Lin
Add new USB IDs for cp2104/5 devices on Bx50v3 boards due to the design change
Signed-off-by Ken Lin <[email protected]>
Thanks for the patch. Looks good except that your author (From) address doesn't match your SoB. Please fix that up and resend.
Thanks,
Johan