drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
Subsystems (2)
PATCH 1/1 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
The 33rd entry in the pre-CSC gamma table in Geminilake can represent a value of 1.0 as 17 bits fixed point with one integer bit. However, the table was generated such that the value of 1.0 would be 0.ffff with all the intervals scaled accordingly. For instance, 0.5 mapped to 0.7fff instead of 0.8000.
For a reason that is not clear to the author, the rounding seems to be different when a cursor plane is used, leading to some seemingly random failures of the kms_cursor_crc igt tests. The differences weren't perceptible at 8bpc with images captured by a Chamelium device, but did cause CRC mismatches.
--- drivers/gpu/drm/i915/intel_color.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_color.c +2 -2
@@ -465,14 +465,14 @@ static void glk_load_degamma_lut(struct drm_crtc_state *state)* different values per channel, so this just loads a linear table. */ for (i =0 ; i < lut_size; i++) { -uint32_t v = (i * ((1 <<16 ) -1 )) / (lut_size -1 ); +uint32_t v = (i * (1 <<16 )) / (lut_size -1 );I915_WRITE (PRE_CSC_GAMC_DATA (pipe), v); }/* Clamp values > 1.0. */ while (i++ <35 ) -I915_WRITE (PRE_CSC_GAMC_DATA (pipe), (1 <<16 ) -1 ); +I915_WRITE (PRE_CSC_GAMC_DATA (pipe), (1 <<16 )); }static void glk_load_luts (struct drm_crtc_state *state)
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/1 kms_cursor_crc: Add a subtest with a 256x256 gradient cursor
Some of the kms_cursor_crc subtests where failing on Geminilake. The root cause was an error on programming the pre-CSC gamma tables, which led to small rounding errors that, although not sufficient to change the image as captured at 8bpc with the Chamelium, were enough to generate a different CRC. It is not clear why the rounding is different when the cursor is enabled, but this was caught by chance, since the cursor would only be exercised with limited color combinations.
To improve coverage, add a test that uses a gradient covering all possible 8bit values for a channel.
--- tests/kms_cursor_crc.c | 42 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-)
tests/kms_cursor_crc.c +38 -4
@@ -87,6 +87,8 @@ static void draw_cursor(cairo_t *cr, int x, int y, int cw, int ch)igt_paint_color_alpha (cr, x + wl, y + ht, wr, hb,0.5 ,0.5 ,0.5 ,1.0 ); } +typedef void (*draw_cursor_cb )(cairo_t *cr,int x,int y,int cw,int ch); +static void cursor_enable (data_t *data) {igt_output_t *output = data->output;
@@ -107,7 +109,8 @@ static void cursor_disable(data_t *data) } -static void do_single_test (data_t *data,int x,int y) +static void do_single_test_with_cursor_cb (data_t *data,int x,int y, +draw_cursor_cb cursor_cb) {igt_display_t *display = &data->display;igt_pipe_crc_t *pipe_crc = data->pipe_crc;
@@ -151,7 +154,7 @@ static void do_single_test(data_t *data, int x, int y)igt_display_commit (display);/* Now render the same in software and collect crc */ -draw_cursor (cr, x, y, data->curw, data->curh); +cursor_cb (cr, x, y, data->curw, data->curh);igt_display_commit (display);igt_wait_for_vblank (data->drm_fd, data->pipe);
@@ -162,6 +165,11 @@ static void do_single_test(data_t *data, int x, int y)igt_paint_color (cr,0 ,0 , data->screenw, data->screenh,0.0 ,0.0 ,0.0 ); } +static void do_single_test (data_t *data,int x,int y) +{ +do_single_test_with_cursor_cb (data, x, y, draw_cursor); +} +static void do_fail_test (data_t *data,int x,int y,int expect) {igt_display_t *display = &data->display;
@@ -386,7 +394,8 @@ static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, intigt_require_f (valid_tests,"no valid crtc/connector combinations found\n" ); } -static void create_cursor_fb (data_t *data,int cur_w,int cur_h) +static void create_cursor_fb_with_cb (data_t *data,int cur_w,int cur_h, +draw_cursor_cb cursor_cb) {cairo_t *cr;uint32_t fb_id;
@@ -406,10 +415,15 @@ static void create_cursor_fb(data_t *data, int cur_w, int cur_h)igt_assert (fb_id); cr =igt_get_cairo_ctx (data->drm_fd, &data->fb); -draw_cursor (cr,0 ,0 , cur_w, cur_h); +cursor_cb (cr,0 ,0 , cur_w, cur_h);igt_assert (cairo_status (cr) ==0 ); } +static void create_cursor_fb (data_t *data,int cur_w,int cur_h) +{ +create_cursor_fb_with_cb (data, cur_w, cur_h, draw_cursor); +} +static bool has_nonsquare_cursors (uint32_t devid) {/*
@@ -506,6 +520,23 @@ static void test_rapid_movement(data_t *data) } +static void draw_cursor_gradient (cairo_t *cr,int x,int y,int cw,int ch) +{ +cairo_set_antialias (cr,CAIRO_ANTIALIAS_NONE ); +igt_paint_color_gradient (cr, x, y, cw, ch,1.0 ,1.0 ,1.0 ); +} + +static void test_cursor_colors (data_t *data) +{ +int cursor_w = data->curw; +int cursor_h = data->curh; + +create_cursor_fb_with_cb (data, cursor_w, cursor_h, + draw_cursor_gradient); +do_single_test_with_cursor_cb (data,0 ,0 , draw_cursor_gradient); +igt_remove_fb (data->drm_fd, &data->fb); +} +static void run_test_generic (data_t *data) {int cursor_size;
@@ -613,6 +644,9 @@ igt_main igt_subtest_f("cursor-size-change")run_test (&data, test_cursor_size, cursor_width, cursor_height); + igt_subtest_f("gradient-cursor") +run_test (&data, test_cursor_colors,256 ,256 ); +run_test_generic (&data); igt_fixture {
Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH i-g-t] kms_cursor_crc: Add a subtest with a 256x256 gradient cursor
Quoted 112 lines · Ander Conselvan de Oliveira
Some of the
kms_cursor_crcsubtests where failing on Geminilake. The root cause was an error on programming the pre-CSC gamma tables, which led to small rounding errors that, although not sufficient to change the image as captured at 8bpc with the Chamelium, were enough to generate a different CRC. It is not clear why the rounding is different when the cursor is enabled, but this was caught by chance, since the cursor would only be exercised with limited color combinations.To improve coverage, add a test that uses a gradient covering all possible 8bit values for a channel.
Signed-off-by Ander Conselvan de Oliveira <[email protected]>--- tests/kms_cursor_crc.c | 42 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-)tests/kms_cursor_crc.c +35
-4@@ -87,6 +87,8 @@ static void draw_cursor(cairo_t *cr, int x, int y, int cw, int ch)igt_paint_color_alpha (cr, x + wl, y + ht, wr, hb,0.5 ,0.5 ,0.5 ,1.0 ); } +typedef void (*draw_cursor_cb )(cairo_t *cr,int x,int y,int cw,int ch); +static void cursor_enable (data_t *data) {igt_output_t *output = data->output;@@ -107,7 +109,8 @@ static void cursor_disable(data_t *data) } -static void do_single_test (data_t *data,int x,int y) +static void do_single_test_with_cursor_cb (data_t *data,int x,int y, +draw_cursor_cb cursor_cb) {igt_display_t *display = &data->display;igt_pipe_crc_t *pipe_crc = data->pipe_crc;@@ -151,7 +154,7 @@ static void do_single_test(data_t *data, int x, int y)igt_display_commit (display);/* Now render the same in software and collect crc */ -draw_cursor (cr, x, y, data->curw, data->curh); +cursor_cb (cr, x, y, data->curw, data->curh);igt_display_commit (display);igt_wait_for_vblank (data->drm_fd, data->pipe);@@ -162,6 +165,11 @@ static void do_single_test(data_t *data, int x, int y)igt_paint_color (cr,0 ,0 , data->screenw, data->screenh,0.0 ,0.0 ,0.0 ); } +static void do_single_test (data_t *data,int x,int y) +{ +do_single_test_with_cursor_cb (data, x, y, draw_cursor); +} +static void do_fail_test (data_t *data,int x,int y,int expect) {igt_display_t *display = &data->display;@@ -386,7 +394,8 @@ static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, intigt_require_f (valid_tests,"no valid crtc/connector combinations found\n" ); } -static void create_cursor_fb (data_t *data,int cur_w,int cur_h) +static void create_cursor_fb_with_cb (data_t *data,int cur_w,int cur_h, +draw_cursor_cb cursor_cb) {cairo_t *cr;uint32_t fb_id;@@ -406,10 +415,15 @@ static void create_cursor_fb(data_t *data, int cur_w, int cur_h)igt_assert (fb_id); cr =igt_get_cairo_ctx (data->drm_fd, &data->fb); -draw_cursor (cr,0 ,0 , cur_w, cur_h); +cursor_cb (cr,0 ,0 , cur_w, cur_h);igt_assert (cairo_status (cr) ==0 ); } +static void create_cursor_fb (data_t *data,int cur_w,int cur_h) +{ +create_cursor_fb_with_cb (data, cur_w, cur_h, draw_cursor); +} +static bool has_nonsquare_cursors (uint32_t devid) {/* @@ -506,6 +520,23 @@ static void test_rapid_movement(data_t *data) } +static void draw_cursor_gradient (cairo_t *cr,int x,int y,int cw,int ch) +{ +cairo_set_antialias (cr,CAIRO_ANTIALIAS_NONE ); +igt_paint_color_gradient (cr, x, y, cw, ch,1.0 ,1.0 ,1.0 ); +} + +static void test_cursor_colors (data_t *data) +{ +int cursor_w = data->curw; +int cursor_h = data->curh; + +create_cursor_fb_with_cb (data, cursor_w, cursor_h, + draw_cursor_gradient); +do_single_test_with_cursor_cb (data,0 ,0 , draw_cursor_gradient); +igt_remove_fb (data->drm_fd, &data->fb); +} +static void run_test_generic (data_t *data) {int cursor_size;
tests/kms_cursor_crc.c igt_main · line 647
Quoted 4 lines
tests/kms_cursor_crc.c +1
-0@@ -613,6 +644,9 @@ igt_main igt_subtest_f("cursor-size-change")run_test (&data, test_cursor_size, cursor_width, cursor_height); +igt_subtest_f ("gradient-cursor" )
Just realized this needs an igt_require(max_cursor_[wh] >= 256).
Ander
tests/kms_cursor_crc.c igt_main · line 652
Quoted 5 lines
tests/kms_cursor_crc.c +2
-0+run_test (&data, test_cursor_colors,256 ,256 ); +run_test_generic (&data); igt_fixture {
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH i-g-t] kms_cursor_crc: Add a subtest with a 256x256 gradient cursor
Quoted 116 lines · Ander Conselvan De Oliveira
Quoted 115 lines · Ander Conselvan de Oliveira
Some of the
kms_cursor_crcsubtests where failing on Geminilake. The root cause was an error on programming the pre-CSC gamma tables, which led to small rounding errors that, although not sufficient to change the image as captured at 8bpc with the Chamelium, were enough to generate a different CRC. It is not clear why the rounding is different when the cursor is enabled, but this was caught by chance, since the cursor would only be exercised with limited color combinations.To improve coverage, add a test that uses a gradient covering all possible 8bit values for a channel.
Signed-off-by Ander Conselvan de Oliveira <[email protected]>--- tests/kms_cursor_crc.c | 42 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 38 insertions(+), 4 deletions(-)tests/kms_cursor_crc.c +35
-4@@ -87,6 +87,8 @@ static void draw_cursor(cairo_t *cr, int x, int y, int cw, int ch)igt_paint_color_alpha (cr, x + wl, y + ht, wr, hb,0.5 ,0.5 ,0.5 ,1.0 ); } +typedef void (*draw_cursor_cb )(cairo_t *cr,int x,int y,int cw,int ch); +static void cursor_enable (data_t *data) {igt_output_t *output = data->output;@@ -107,7 +109,8 @@ static void cursor_disable(data_t *data) } -static void do_single_test (data_t *data,int x,int y) +static void do_single_test_with_cursor_cb (data_t *data,int x,int y, +draw_cursor_cb cursor_cb) {igt_display_t *display = &data->display;igt_pipe_crc_t *pipe_crc = data->pipe_crc;@@ -151,7 +154,7 @@ static void do_single_test(data_t *data, int x, int y)igt_display_commit (display);/* Now render the same in software and collect crc */ -draw_cursor (cr, x, y, data->curw, data->curh); +cursor_cb (cr, x, y, data->curw, data->curh);igt_display_commit (display);igt_wait_for_vblank (data->drm_fd, data->pipe);@@ -162,6 +165,11 @@ static void do_single_test(data_t *data, int x, int y)igt_paint_color (cr,0 ,0 , data->screenw, data->screenh,0.0 ,0.0 ,0.0 ); } +static void do_single_test (data_t *data,int x,int y) +{ +do_single_test_with_cursor_cb (data, x, y, draw_cursor); +} +static void do_fail_test (data_t *data,int x,int y,int expect) {igt_display_t *display = &data->display;@@ -386,7 +394,8 @@ static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, intigt_require_f (valid_tests,"no valid crtc/connector combinations found\n" ); } -static void create_cursor_fb (data_t *data,int cur_w,int cur_h) +static void create_cursor_fb_with_cb (data_t *data,int cur_w,int cur_h, +draw_cursor_cb cursor_cb) {cairo_t *cr;uint32_t fb_id;@@ -406,10 +415,15 @@ static void create_cursor_fb(data_t *data, int cur_w, int cur_h)igt_assert (fb_id); cr =igt_get_cairo_ctx (data->drm_fd, &data->fb); -draw_cursor (cr,0 ,0 , cur_w, cur_h); +cursor_cb (cr,0 ,0 , cur_w, cur_h);igt_assert (cairo_status (cr) ==0 ); } +static void create_cursor_fb (data_t *data,int cur_w,int cur_h) +{ +create_cursor_fb_with_cb (data, cur_w, cur_h, draw_cursor); +} +static bool has_nonsquare_cursors (uint32_t devid) {/* @@ -506,6 +520,23 @@ static void test_rapid_movement(data_t *data) } +static void draw_cursor_gradient (cairo_t *cr,int x,int y,int cw,int ch) +{ +cairo_set_antialias (cr,CAIRO_ANTIALIAS_NONE ); +igt_paint_color_gradient (cr, x, y, cw, ch,1.0 ,1.0 ,1.0 ); +} + +static void test_cursor_colors (data_t *data) +{ +int cursor_w = data->curw; +int cursor_h = data->curh; + +create_cursor_fb_with_cb (data, cursor_w, cursor_h, + draw_cursor_gradient); +do_single_test_with_cursor_cb (data,0 ,0 , draw_cursor_gradient); +igt_remove_fb (data->drm_fd, &data->fb); +} +static void run_test_generic (data_t *data) {int cursor_size;@@ -613,6 +644,9 @@ igt_main igt_subtest_f("cursor-size-change")run_test (&data, test_cursor_size, cursor_width, cursor_height);
Quoted 3 lines
tests/kms_cursor_crc.c igt_main · line 647
Quoted 1 line
tests/kms_cursor_crc.c +1
-0+igt_subtest_f ("gradient-cursor" )Just realized this needs an
igt_require(max_cursor_[wh] >= 256).
I spoke too soon; run_test() actually does that check.
Quoted 7 lines
Ander
tests/kms_cursor_crc.c igt_main · line 652
Quoted 5 lines
tests/kms_cursor_crc.c +2
-0+run_test (&data, test_cursor_colors,256 ,256 ); +run_test_generic (&data); igt_fixture {
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 5 lines · Ander Conselvan de Oliveira
The 33rd entry in the pre-CSC gamma table in Geminilake can represent a value of 1.0 as 17 bits fixed point with one integer bit. However, the table was generated such that the value of 1.0 would be 0.ffff with all the intervals scaled accordingly. For instance, 0.5 mapped to 0.7fff instead of 0.8000.
Actually all the gamma tables except the legacy 8bpc gamma have this 1.0 thing. And yet we program them all to <1.0. But I guess in most cases that doesn't cause any issues. But I think this is definitely something someone should look at.
One problem is that the uapi we got in the end uses 0.16 representation instead of the 8.24 that I thought we were going with. So the conversion isn't going to as nice as it could be I suppose.
But yeah, this patch seems trouble free since we don't yet expose the pre-csc gamma to userspace.
Quoted 40 lines
For a reason that is not clear to the author, the rounding seems to be different when a cursor plane is used, leading to some seemingly random failures of the
kms_cursor_crcigt tests. The differences weren't perceptible at 8bpc with images captured by a Chamelium device, but did cause CRC mismatches.Signed-off-by Ander Conselvan de Oliveira <[email protected]>--- drivers/gpu/drm/i915/intel_color.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/intel_color.c +2
-2@@ -465,14 +465,14 @@ static void glk_load_degamma_lut(struct drm_crtc_state *state)* different values per channel, so this just loads a linear table. */ for (i =0 ; i < lut_size; i++) { -uint32_t v = (i * ((1 <<16 ) -1 )) / (lut_size -1 ); +uint32_t v = (i * (1 <<16 )) / (lut_size -1 );I915_WRITE (PRE_CSC_GAMC_DATA (pipe), v); }/* Clamp values > 1.0. */ while (i++ <35 ) -I915_WRITE (PRE_CSC_GAMC_DATA (pipe), (1 <<16 ) -1 ); +I915_WRITE (PRE_CSC_GAMC_DATA (pipe), (1 <<16 )); }static void glk_load_luts (struct drm_crtc_state *state)Signature · 6 lines
2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
In reply to Ander Conselvan de Oliveira== Series Details ==
== Series Details ==
Series: drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
URL : https://patchwork.freedesktop.org/series/21049/
State : success
== Summary ==
Series 21049v1 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
https://patchwork.freedesktop.org/api/1.0/series/21049/revisions/1/mbox/
fi-bdw-5557u total:278 pass:267 dwarn:0 dfail:0 fail:0 skip:11 time: 459s fi-bsw-n3050 total:278 pass:239 dwarn:0 dfail:0 fail:0 skip:39 time: 610s fi-bxt-j4205 total:278 pass:259 dwarn:0 dfail:0 fail:0 skip:19 time: 536s fi-bxt-t5700 total:278 pass:258 dwarn:0 dfail:0 fail:0 skip:20 time: 596s fi-byt-j1900 total:278 pass:251 dwarn:0 dfail:0 fail:0 skip:27 time: 508s fi-byt-n2820 total:278 pass:247 dwarn:0 dfail:0 fail:0 skip:31 time: 504s fi-hsw-4770 total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time: 444s fi-hsw-4770r total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time: 436s fi-ilk-650 total:278 pass:228 dwarn:0 dfail:0 fail:0 skip:50 time: 437s fi-ivb-3520m total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time: 508s fi-ivb-3770 total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time: 500s fi-kbl-7500u total:278 pass:259 dwarn:1 dfail:0 fail:0 skip:18 time: 479s fi-skl-6260u total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 time: 510s fi-skl-6700hq total:278 pass:261 dwarn:0 dfail:0 fail:0 skip:17 time: 591s fi-skl-6700k total:278 pass:256 dwarn:4 dfail:0 fail:0 skip:18 time: 498s fi-skl-6770hq total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 time: 558s fi-snb-2520m total:278 pass:250 dwarn:0 dfail:0 fail:0 skip:28 time: 556s fi-snb-2600 total:278 pass:249 dwarn:0 dfail:0 fail:0 skip:29 time: 426s
d8d69f76555feef19e3e4b601378446604d90da5 drm-tip: 2017y-03m-10d-11h-50m-04s UTC integration manifest f2f76a8 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4134/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✓ Fi.CI.BAT: success for drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
Quoted 5 lines · Patchwork
== Series Details ==
Series: drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
URL : https://patchwork.freedesktop.org/series/21049/
State : success
Pushed. Thanks for reviewing.
Ander
Quoted 28 lines
== Summary ==
Series 21049v1 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
https://patchwork.freedesktop.org/api/1.0/series/21049/revisions/1/mbox/fi-bdw-5557u total:278 pass:267 dwarn:0 dfail:0 fail:0 skip:11 time: 459s fi-bsw-n3050 total:278 pass:239 dwarn:0 dfail:0 fail:0 skip:39 time: 610s fi-bxt-j4205 total:278 pass:259 dwarn:0 dfail:0 fail:0 skip:19 time: 536s fi-bxt-t5700 total:278 pass:258 dwarn:0 dfail:0 fail:0 skip:20 time: 596s fi-byt-j1900 total:278 pass:251 dwarn:0 dfail:0 fail:0 skip:27 time: 508s fi-byt-n2820 total:278 pass:247 dwarn:0 dfail:0 fail:0 skip:31 time: 504s fi-hsw-4770 total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time: 444s fi-hsw-4770r total:278 pass:262 dwarn:0 dfail:0 fail:0 skip:16 time: 436s fi-ilk-650 total:278 pass:228 dwarn:0 dfail:0 fail:0 skip:50 time: 437s fi-ivb-3520m total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time: 508s fi-ivb-3770 total:278 pass:260 dwarn:0 dfail:0 fail:0 skip:18 time: 500s fi-kbl-7500u total:278 pass:259 dwarn:1 dfail:0 fail:0 skip:18 time: 479s fi-skl-6260u total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 time: 510s fi-skl-6700hq total:278 pass:261 dwarn:0 dfail:0 fail:0 skip:17 time: 591s fi-skl-6700k total:278 pass:256 dwarn:4 dfail:0 fail:0 skip:18 time: 498s fi-skl-6770hq total:278 pass:268 dwarn:0 dfail:0 fail:0 skip:10 time: 558s fi-snb-2520m total:278 pass:250 dwarn:0 dfail:0 fail:0 skip:28 time: 556s fi-snb-2600 total:278 pass:249 dwarn:0 dfail:0 fail:0 skip:29 time: 426s
d8d69f76555feef19e3e4b601378446604d90da5drm-tip: 2017y-03m-10d-11h-50m-04s UTC integration manifest f2f76a8 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
Quoted 7 lines
== Logs ==
For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4134/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx