Skip to contentSkip to conversation

drm/i915/glk: Improve rounding caused by pre-CSC gamma tables

PATCH In review Ander Conselvan de Oliveira 4 participants 7 messages Mar 10, 2017 – Mar 14, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables

The 33rd entry in the pre-CSC gamma table in Geminilake can represent a value of 1.0 as 17 bits fixed point with one integer bit. However, the table was generated such that the value of 1.0 would be 0.ffff with all the intervals scaled accordingly. For instance, 0.5 mapped to 0.7fff instead of 0.8000.

For a reason that is not clear to the author, the rounding seems to be different when a cursor plane is used, leading to some seemingly random failures of the kms_cursor_crc igt tests. The differences weren't perceptible at 8bpc with images captured by a Chamelium device, but did cause CRC mismatches.

---
 drivers/gpu/drm/i915/intel_color.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_color.c +2 -2
index b9e5266d..306c6b0 100644
@@ -465,14 +465,14 @@ static void glk_load_degamma_lut(struct drm_crtc_state *state)
 	 *  different values per channel, so this just loads a linear table.
 	 */
 	for (i = 0; i < lut_size; i++) {
-		uint32_t v = (i * ((1 << 16) - 1)) / (lut_size - 1);
+		uint32_t v = (i * (1 << 16)) / (lut_size - 1);
 
 		I915_WRITE(PRE_CSC_GAMC_DATA(pipe), v);
 	}
 
 	/* Clamp values > 1.0. */
 	while (i++ < 35)
-		I915_WRITE(PRE_CSC_GAMC_DATA(pipe), (1 << 16) - 1);
+		I915_WRITE(PRE_CSC_GAMC_DATA(pipe), (1 << 16));
 }
 
 static void glk_load_luts(struct drm_crtc_state *state)
Signature · 6 lines
2.9.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/1 kms_cursor_crc: Add a subtest with a 256x256 gradient cursor

Some of the kms_cursor_crc subtests where failing on Geminilake. The root cause was an error on programming the pre-CSC gamma tables, which led to small rounding errors that, although not sufficient to change the image as captured at 8bpc with the Chamelium, were enough to generate a different CRC. It is not clear why the rounding is different when the cursor is enabled, but this was caught by chance, since the cursor would only be exercised with limited color combinations.

To improve coverage, add a test that uses a gradient covering all possible 8bit values for a channel.

---
 tests/kms_cursor_crc.c | 42 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)
tests/kms_cursor_crc.c +38 -4
index 4851e18..0b232bf 100644
@@ -87,6 +87,8 @@ static void draw_cursor(cairo_t *cr, int x, int y, int cw, int ch)
 	igt_paint_color_alpha(cr, x + wl, y + ht, wr, hb, 0.5, 0.5, 0.5, 1.0);
 }
 
+typedef void(*draw_cursor_cb)(cairo_t *cr, int x, int y, int cw, int ch);
+
 static void cursor_enable(data_t *data)
 {
 	igt_output_t *output = data->output;
@@ -107,7 +109,8 @@ static void cursor_disable(data_t *data)
 }
 
 
-static void do_single_test(data_t *data, int x, int y)
+static void do_single_test_with_cursor_cb(data_t *data, int x, int y,
+					  draw_cursor_cb cursor_cb)
 {
 	igt_display_t *display = &data->display;
 	igt_pipe_crc_t *pipe_crc = data->pipe_crc;
@@ -151,7 +154,7 @@ static void do_single_test(data_t *data, int x, int y)
 	igt_display_commit(display);
 
 	/* Now render the same in software and collect crc */
-	draw_cursor(cr, x, y, data->curw, data->curh);
+	cursor_cb(cr, x, y, data->curw, data->curh);
 	igt_display_commit(display);
 
 	igt_wait_for_vblank(data->drm_fd, data->pipe);
@@ -162,6 +165,11 @@ static void do_single_test(data_t *data, int x, int y)
 	igt_paint_color(cr, 0, 0, data->screenw, data->screenh, 0.0, 0.0, 0.0);
 }
 
+static void do_single_test(data_t *data, int x, int y)
+{
+	do_single_test_with_cursor_cb(data, x, y, draw_cursor);
+}
+
 static void do_fail_test(data_t *data, int x, int y, int expect)
 {
 	igt_display_t *display = &data->display;
@@ -386,7 +394,8 @@ static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, int
 	igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
 }
 
-static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
+static void create_cursor_fb_with_cb(data_t *data, int cur_w, int cur_h,
+				     draw_cursor_cb cursor_cb)
 {
 	cairo_t *cr;
 	uint32_t fb_id;
@@ -406,10 +415,15 @@ static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
 	igt_assert(fb_id);
 
 	cr = igt_get_cairo_ctx(data->drm_fd, &data->fb);
-	draw_cursor(cr, 0, 0, cur_w, cur_h);
+	cursor_cb(cr, 0, 0, cur_w, cur_h);
 	igt_assert(cairo_status(cr) == 0);
 }
 
+static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
+{
+	create_cursor_fb_with_cb(data, cur_w, cur_h, draw_cursor);
+}
+
 static bool has_nonsquare_cursors(uint32_t devid)
 {
 	/*
@@ -506,6 +520,23 @@ static void test_rapid_movement(data_t *data)
 
 }
 
+static void draw_cursor_gradient(cairo_t *cr, int x, int y, int cw, int ch)
+{
+	cairo_set_antialias(cr, CAIRO_ANTIALIAS_NONE);
+	igt_paint_color_gradient(cr, x, y, cw, ch, 1.0, 1.0, 1.0);
+}
+
+static void test_cursor_colors(data_t *data)
+{
+	int cursor_w = data->curw;
+	int cursor_h = data->curh;
+
+	create_cursor_fb_with_cb(data, cursor_w, cursor_h,
+				 draw_cursor_gradient);
+	do_single_test_with_cursor_cb(data, 0, 0, draw_cursor_gradient);
+	igt_remove_fb(data->drm_fd, &data->fb);
+}
+
 static void run_test_generic(data_t *data)
 {
 	int cursor_size;
@@ -613,6 +644,9 @@ igt_main
 	igt_subtest_f("cursor-size-change")
 		run_test(&data, test_cursor_size, cursor_width, cursor_height);
 
+	igt_subtest_f("gradient-cursor")
+		run_test(&data, test_cursor_colors, 256, 256);
+
 	run_test_generic(&data);
 
 	igt_fixture {
Signature · 6 lines
2.9.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

Re: [PATCH i-g-t] kms_cursor_crc: Add a subtest with a 256x256 gradient cursor

Quoted 112 lines · Ander Conselvan de Oliveira

Some of the kms_cursor_crc subtests where failing on Geminilake. The root cause was an error on programming the pre-CSC gamma tables, which led to small rounding errors that, although not sufficient to change the image as captured at 8bpc with the Chamelium, were enough to generate a different CRC. It is not clear why the rounding is different when the cursor is enabled, but this was caught by chance, since the cursor would only be exercised with limited color combinations.

To improve coverage, add a test that uses a gradient covering all possible 8bit values for a channel.

---
 tests/kms_cursor_crc.c | 42 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)
tests/kms_cursor_crc.c +35 -4
index 4851e18..0b232bf 100644
@@ -87,6 +87,8 @@ static void draw_cursor(cairo_t *cr, int x, int y, int cw, int ch)
 	igt_paint_color_alpha(cr, x + wl, y + ht, wr, hb, 0.5, 0.5, 0.5, 1.0);
 }
 
+typedef void(*draw_cursor_cb)(cairo_t *cr, int x, int y, int cw, int ch);
+
 static void cursor_enable(data_t *data)
 {
 	igt_output_t *output = data->output;
@@ -107,7 +109,8 @@ static void cursor_disable(data_t *data)
 }
 
 
-static void do_single_test(data_t *data, int x, int y)
+static void do_single_test_with_cursor_cb(data_t *data, int x, int y,
+					  draw_cursor_cb cursor_cb)
 {
 	igt_display_t *display = &data->display;
 	igt_pipe_crc_t *pipe_crc = data->pipe_crc;
@@ -151,7 +154,7 @@ static void do_single_test(data_t *data, int x, int y)
 	igt_display_commit(display);
 
 	/* Now render the same in software and collect crc */
-	draw_cursor(cr, x, y, data->curw, data->curh);
+	cursor_cb(cr, x, y, data->curw, data->curh);
 	igt_display_commit(display);
 
 	igt_wait_for_vblank(data->drm_fd, data->pipe);
@@ -162,6 +165,11 @@ static void do_single_test(data_t *data, int x, int y)
 	igt_paint_color(cr, 0, 0, data->screenw, data->screenh, 0.0, 0.0, 0.0);
 }
 
+static void do_single_test(data_t *data, int x, int y)
+{
+	do_single_test_with_cursor_cb(data, x, y, draw_cursor);
+}
+
 static void do_fail_test(data_t *data, int x, int y, int expect)
 {
 	igt_display_t *display = &data->display;
@@ -386,7 +394,8 @@ static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, int
 	igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
 }
 
-static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
+static void create_cursor_fb_with_cb(data_t *data, int cur_w, int cur_h,
+				     draw_cursor_cb cursor_cb)
 {
 	cairo_t *cr;
 	uint32_t fb_id;
@@ -406,10 +415,15 @@ static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
 	igt_assert(fb_id);
 
 	cr = igt_get_cairo_ctx(data->drm_fd, &data->fb);
-	draw_cursor(cr, 0, 0, cur_w, cur_h);
+	cursor_cb(cr, 0, 0, cur_w, cur_h);
 	igt_assert(cairo_status(cr) == 0);
 }
 
+static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
+{
+	create_cursor_fb_with_cb(data, cur_w, cur_h, draw_cursor);
+}
+
 static bool has_nonsquare_cursors(uint32_t devid)
 {
 	/*
@@ -506,6 +520,23 @@ static void test_rapid_movement(data_t *data)
 
 }
 
+static void draw_cursor_gradient(cairo_t *cr, int x, int y, int cw, int ch)
+{
+	cairo_set_antialias(cr, CAIRO_ANTIALIAS_NONE);
+	igt_paint_color_gradient(cr, x, y, cw, ch, 1.0, 1.0, 1.0);
+}
+
+static void test_cursor_colors(data_t *data)
+{
+	int cursor_w = data->curw;
+	int cursor_h = data->curh;
+
+	create_cursor_fb_with_cb(data, cursor_w, cursor_h,
+				 draw_cursor_gradient);
+	do_single_test_with_cursor_cb(data, 0, 0, draw_cursor_gradient);
+	igt_remove_fb(data->drm_fd, &data->fb);
+}
+
 static void run_test_generic(data_t *data)
 {
 	int cursor_size;

tests/kms_cursor_crc.c igt_main · line 647

Quoted 4 lines
tests/kms_cursor_crc.c +1 -0
@@ -613,6 +644,9 @@ igt_main
 	igt_subtest_f("cursor-size-change")
 		run_test(&data, test_cursor_size, cursor_width, cursor_height);
 
+	igt_subtest_f("gradient-cursor")

Just realized this needs an igt_require(max_cursor_[wh] >= 256).

Ander

tests/kms_cursor_crc.c igt_main · line 652

Quoted 5 lines
tests/kms_cursor_crc.c +2 -0
+		run_test(&data, test_cursor_colors, 256, 256);
+
 	run_test_generic(&data);
 
 	igt_fixture {

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

Re: [PATCH i-g-t] kms_cursor_crc: Add a subtest with a 256x256 gradient cursor

Quoted 116 lines · Ander Conselvan De Oliveira
Quoted 115 lines · Ander Conselvan de Oliveira

Some of the kms_cursor_crc subtests where failing on Geminilake. The root cause was an error on programming the pre-CSC gamma tables, which led to small rounding errors that, although not sufficient to change the image as captured at 8bpc with the Chamelium, were enough to generate a different CRC. It is not clear why the rounding is different when the cursor is enabled, but this was caught by chance, since the cursor would only be exercised with limited color combinations.

To improve coverage, add a test that uses a gradient covering all possible 8bit values for a channel.

---
 tests/kms_cursor_crc.c | 42 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)
tests/kms_cursor_crc.c +35 -4
index 4851e18..0b232bf 100644
@@ -87,6 +87,8 @@ static void draw_cursor(cairo_t *cr, int x, int y, int cw, int ch)
 	igt_paint_color_alpha(cr, x + wl, y + ht, wr, hb, 0.5, 0.5, 0.5, 1.0);
 }
 
+typedef void(*draw_cursor_cb)(cairo_t *cr, int x, int y, int cw, int ch);
+
 static void cursor_enable(data_t *data)
 {
 	igt_output_t *output = data->output;
@@ -107,7 +109,8 @@ static void cursor_disable(data_t *data)
 }
 
 
-static void do_single_test(data_t *data, int x, int y)
+static void do_single_test_with_cursor_cb(data_t *data, int x, int y,
+					  draw_cursor_cb cursor_cb)
 {
 	igt_display_t *display = &data->display;
 	igt_pipe_crc_t *pipe_crc = data->pipe_crc;
@@ -151,7 +154,7 @@ static void do_single_test(data_t *data, int x, int y)
 	igt_display_commit(display);
 
 	/* Now render the same in software and collect crc */
-	draw_cursor(cr, x, y, data->curw, data->curh);
+	cursor_cb(cr, x, y, data->curw, data->curh);
 	igt_display_commit(display);
 
 	igt_wait_for_vblank(data->drm_fd, data->pipe);
@@ -162,6 +165,11 @@ static void do_single_test(data_t *data, int x, int y)
 	igt_paint_color(cr, 0, 0, data->screenw, data->screenh, 0.0, 0.0, 0.0);
 }
 
+static void do_single_test(data_t *data, int x, int y)
+{
+	do_single_test_with_cursor_cb(data, x, y, draw_cursor);
+}
+
 static void do_fail_test(data_t *data, int x, int y, int expect)
 {
 	igt_display_t *display = &data->display;
@@ -386,7 +394,8 @@ static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, int
 	igt_require_f(valid_tests, "no valid crtc/connector combinations found\n");
 }
 
-static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
+static void create_cursor_fb_with_cb(data_t *data, int cur_w, int cur_h,
+				     draw_cursor_cb cursor_cb)
 {
 	cairo_t *cr;
 	uint32_t fb_id;
@@ -406,10 +415,15 @@ static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
 	igt_assert(fb_id);
 
 	cr = igt_get_cairo_ctx(data->drm_fd, &data->fb);
-	draw_cursor(cr, 0, 0, cur_w, cur_h);
+	cursor_cb(cr, 0, 0, cur_w, cur_h);
 	igt_assert(cairo_status(cr) == 0);
 }
 
+static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
+{
+	create_cursor_fb_with_cb(data, cur_w, cur_h, draw_cursor);
+}
+
 static bool has_nonsquare_cursors(uint32_t devid)
 {
 	/*
@@ -506,6 +520,23 @@ static void test_rapid_movement(data_t *data)
 
 }
 
+static void draw_cursor_gradient(cairo_t *cr, int x, int y, int cw, int ch)
+{
+	cairo_set_antialias(cr, CAIRO_ANTIALIAS_NONE);
+	igt_paint_color_gradient(cr, x, y, cw, ch, 1.0, 1.0, 1.0);
+}
+
+static void test_cursor_colors(data_t *data)
+{
+	int cursor_w = data->curw;
+	int cursor_h = data->curh;
+
+	create_cursor_fb_with_cb(data, cursor_w, cursor_h,
+				 draw_cursor_gradient);
+	do_single_test_with_cursor_cb(data, 0, 0, draw_cursor_gradient);
+	igt_remove_fb(data->drm_fd, &data->fb);
+}
+
 static void run_test_generic(data_t *data)
 {
 	int cursor_size;
@@ -613,6 +644,9 @@ igt_main
 	igt_subtest_f("cursor-size-change")
 		run_test(&data, test_cursor_size, cursor_width, cursor_height);
 
Quoted 3 lines

tests/kms_cursor_crc.c igt_main · line 647

Quoted 1 line
tests/kms_cursor_crc.c +1 -0
+	igt_subtest_f("gradient-cursor")

Just realized this needs an igt_require(max_cursor_[wh] >= 256).

I spoke too soon; run_test() actually does that check.

Quoted 7 lines

Ander

tests/kms_cursor_crc.c igt_main · line 652

Quoted 5 lines
tests/kms_cursor_crc.c +2 -0
+		run_test(&data, test_cursor_colors, 256, 256);
+
 	run_test_generic(&data);
 
 	igt_fixture {

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v1 1/1
#4 lore raw
In reply to Ander Conselvan de Oliveira
Quoted 5 lines · Ander Conselvan de Oliveira

The 33rd entry in the pre-CSC gamma table in Geminilake can represent a value of 1.0 as 17 bits fixed point with one integer bit. However, the table was generated such that the value of 1.0 would be 0.ffff with all the intervals scaled accordingly. For instance, 0.5 mapped to 0.7fff instead of 0.8000.

Actually all the gamma tables except the legacy 8bpc gamma have this 1.0 thing. And yet we program them all to <1.0. But I guess in most cases that doesn't cause any issues. But I think this is definitely something someone should look at.

One problem is that the uapi we got in the end uses 0.16 representation instead of the 8.24 that I thought we were going with. So the conversion isn't going to as nice as it could be I suppose.

But yeah, this patch seems trouble free since we don't yet expose the pre-csc gamma to userspace.

Quoted 40 lines

For a reason that is not clear to the author, the rounding seems to be different when a cursor plane is used, leading to some seemingly random failures of the kms_cursor_crc igt tests. The differences weren't perceptible at 8bpc with images captured by a Chamelium device, but did cause CRC mismatches.

---
 drivers/gpu/drm/i915/intel_color.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_color.c +2 -2
index b9e5266d..306c6b0 100644
@@ -465,14 +465,14 @@ static void glk_load_degamma_lut(struct drm_crtc_state *state)
 	 *  different values per channel, so this just loads a linear table.
 	 */
 	for (i = 0; i < lut_size; i++) {
-		uint32_t v = (i * ((1 << 16) - 1)) / (lut_size - 1);
+		uint32_t v = (i * (1 << 16)) / (lut_size - 1);
 
 		I915_WRITE(PRE_CSC_GAMC_DATA(pipe), v);
 	}
 
 	/* Clamp values > 1.0. */
 	while (i++ < 35)
-		I915_WRITE(PRE_CSC_GAMC_DATA(pipe), (1 << 16) - 1);
+		I915_WRITE(PRE_CSC_GAMC_DATA(pipe), (1 << 16));
 }
 
 static void glk_load_luts(struct drm_crtc_state *state)
Signature · 6 lines
2.9.3

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

✓ Fi.CI.BAT: success for drm/i915/glk: Improve rounding caused by pre-CSC gamma tables

In reply to Ander Conselvan de Oliveira
== Series Details ==

== Series Details ==

Series: drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
URL : https://patchwork.freedesktop.org/series/21049/
State : success

== Summary ==

Series 21049v1 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
https://patchwork.freedesktop.org/api/1.0/series/21049/revisions/1/mbox/

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time: 459s
fi-bsw-n3050     total:278  pass:239  dwarn:0   dfail:0   fail:0   skip:39  time: 610s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 536s
fi-bxt-t5700     total:278  pass:258  dwarn:0   dfail:0   fail:0   skip:20  time: 596s
fi-byt-j1900     total:278  pass:251  dwarn:0   dfail:0   fail:0   skip:27  time: 508s
fi-byt-n2820     total:278  pass:247  dwarn:0   dfail:0   fail:0   skip:31  time: 504s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 444s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 436s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time: 437s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 508s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 500s
fi-kbl-7500u     total:278  pass:259  dwarn:1   dfail:0   fail:0   skip:18  time: 479s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 510s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time: 591s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time: 498s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 558s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time: 556s
fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time: 426s

d8d69f76555feef19e3e4b601378446604d90da5 drm-tip: 2017y-03m-10d-11h-50m-04s UTC integration manifest f2f76a8 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4134/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

Re: ✓ Fi.CI.BAT: success for drm/i915/glk: Improve rounding caused by pre-CSC gamma tables

Quoted 5 lines · Patchwork

== Series Details ==

Series: drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
URL : https://patchwork.freedesktop.org/series/21049/
State : success

Pushed. Thanks for reviewing.

Ander

Quoted 28 lines

== Summary ==

Series 21049v1 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables
https://patchwork.freedesktop.org/api/1.0/series/21049/revisions/1/mbox/

fi-bdw-5557u     total:278  pass:267  dwarn:0   dfail:0   fail:0   skip:11  time: 459s
fi-bsw-n3050     total:278  pass:239  dwarn:0   dfail:0   fail:0   skip:39  time: 610s
fi-bxt-j4205     total:278  pass:259  dwarn:0   dfail:0   fail:0   skip:19  time: 536s
fi-bxt-t5700     total:278  pass:258  dwarn:0   dfail:0   fail:0   skip:20  time: 596s
fi-byt-j1900     total:278  pass:251  dwarn:0   dfail:0   fail:0   skip:27  time: 508s
fi-byt-n2820     total:278  pass:247  dwarn:0   dfail:0   fail:0   skip:31  time: 504s
fi-hsw-4770      total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 444s
fi-hsw-4770r     total:278  pass:262  dwarn:0   dfail:0   fail:0   skip:16  time: 436s
fi-ilk-650       total:278  pass:228  dwarn:0   dfail:0   fail:0   skip:50  time: 437s
fi-ivb-3520m     total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 508s
fi-ivb-3770      total:278  pass:260  dwarn:0   dfail:0   fail:0   skip:18  time: 500s
fi-kbl-7500u     total:278  pass:259  dwarn:1   dfail:0   fail:0   skip:18  time: 479s
fi-skl-6260u     total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 510s
fi-skl-6700hq    total:278  pass:261  dwarn:0   dfail:0   fail:0   skip:17  time: 591s
fi-skl-6700k     total:278  pass:256  dwarn:4   dfail:0   fail:0   skip:18  time: 498s
fi-skl-6770hq    total:278  pass:268  dwarn:0   dfail:0   fail:0   skip:10  time: 558s
fi-snb-2520m     total:278  pass:250  dwarn:0   dfail:0   fail:0   skip:28  time: 556s
fi-snb-2600      total:278  pass:249  dwarn:0   dfail:0   fail:0   skip:29  time: 426s

d8d69f76555feef19e3e4b601378446604d90da5 drm-tip: 2017y-03m-10d-11h-50m-04s UTC integration manifest f2f76a8 drm/i915/glk: Improve rounding caused by pre-CSC gamma tables

Quoted 7 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/CI/Patchwork_4134/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx