staging: sm750fb: fix multiple checkpatch warnings
Subsystems (2)
v3 cover staging: sm750fb: fix multiple checkpatch warnings
Fix multiple code styling warnings issued by checkpatch on files in sm750fb driver
Arushi Singhal (4):
staging: sm750fb: function prototype argument should have an
identifier name
staging: sm750fb: fixes add blank line after
function/struct/union/enum declarations
staging: sm750fb: Alignment should match open parenthesis
staging: sm750fb: Remove typedefs
drivers/staging/sm750fb/ddk750_display.h | 2 +- drivers/staging/sm750fb/ddk750_mode.c | 83 ++++++++++++++++---------------- drivers/staging/sm750fb/ddk750_mode.h | 20 +++--- drivers/staging/sm750fb/ddk750_power.h | 2 +- drivers/staging/sm750fb/sm750.h | 4 +- drivers/staging/sm750fb/sm750_cursor.c | 3 + drivers/staging/sm750fb/sm750_hw.c | 2 +- 7 files changed, 58 insertions(+), 58 deletions(-)
Signature · 4 lines
changes in v3 - change the subject of the cover-patch. 2.11.0
PATCH v3 1/4 staging: sm750fb: function prototype argument should have an identifier name
function prototype arguments like 'struct vb_device_info *','unsigned long' etc. should have an identifier name.
---
changes in v3
- add the identifier name of one more prototype arguments.
drivers/staging/sm750fb/ddk750_display.h | 2 +- drivers/staging/sm750fb/ddk750_mode.h | 2 +- drivers/staging/sm750fb/ddk750_power.h | 2 +- drivers/staging/sm750fb/sm750.h | 4 ++-- 4 files changed, 5 insertions(+), 5 deletions(-)
drivers/staging/sm750fb/ddk750_display.h +1 -1
@@ -102,6 +102,6 @@ typedef enum _disp_output_t { } disp_output_t; -void ddk750_setLogicalDispOut (disp_output_t ); +void ddk750_setLogicalDispOut (disp_output_t output);#endif
drivers/staging/sm750fb/ddk750_mode.h +1 -1
@@ -34,6 +34,6 @@ typedef struct _mode_parameter_t { } mode_parameter_t; -int ddk750_setModeTiming (mode_parameter_t *,clock_type_t ); +int ddk750_setModeTiming (mode_parameter_t *parm,clock_type_t clock);#endif
drivers/staging/sm750fb/ddk750_power.h +1 -1
@@ -14,7 +14,7 @@ DPMS_t; (peek32(MISC_CTRL) & ~MISC_CTRL_DAC_POWER_OFF) | (off)); \ } -void ddk750_set_dpms (DPMS_t ); +void ddk750_set_dpms (DPMS_t state);void sm750_set_power_mode (unsigned int powerMode);void sm750_set_current_gate (unsigned int gate);
drivers/staging/sm750fb/sm750.h +2 -2
@@ -184,8 +184,8 @@ static inline unsigned long ps_to_hz(unsigned int psvalue) }int hw_sm750_map (struct sm750_dev *sm750_dev,struct pci_dev *pdev); -int hw_sm750_inithw (struct sm750_dev *,struct pci_dev *); -void hw_sm750_initAccel (struct sm750_dev *); +int hw_sm750_inithw (struct sm750_dev *sm750_dev,struct pci_dev *pdev); +void hw_sm750_initAccel (struct sm750_dev *sm750_dev);int hw_sm750_deWait (void );int hw_sm750le_deWait (void );
Signature · 1 line
2.11.0
PATCH v3 2/4 staging: sm750fb: fixes add blank line after function/struct/union/enum declarations
In reply to Arushi SinghalThis patch fixes the warnings reported by checkpatch.pl for please use a blank line after function/struct/union/enum declarations.
--- drivers/staging/sm750fb/sm750_cursor.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/staging/sm750fb/sm750_cursor.c +3 -0
@@ -54,6 +54,7 @@ void sm750_hw_cursor_enable(struct lynx_cursor *cursor) reg = (cursor->offset &HWC_ADDRESS_ADDRESS_MASK ) |HWC_ADDRESS_ENABLE ;poke32 (HWC_ADDRESS , reg); } +void sm750_hw_cursor_disable (struct lynx_cursor *cursor) {poke32 (HWC_ADDRESS ,0 );
@@ -65,6 +66,7 @@ void sm750_hw_cursor_setSize(struct lynx_cursor *cursor, cursor->w = w; cursor->h = h; } +void sm750_hw_cursor_setPos (struct lynx_cursor *cursor,int x,int y) {
@@ -74,6 +76,7 @@ void sm750_hw_cursor_setPos(struct lynx_cursor *cursor, (x &HWC_LOCATION_X_MASK );poke32 (HWC_LOCATION , reg); } +void sm750_hw_cursor_setColor (struct lynx_cursor *cursor,u32 fg,u32 bg) {
Signature · 1 line
2.11.0
PATCH v3 3/4 staging: sm750fb: Alignment should match open parenthesis
In reply to Arushi SinghalFix checkpatch issues: "CHECK: Alignment should match open parenthesis".
--- drivers/staging/sm750fb/ddk750_mode.c | 79 +++++++++++++++++------------------ 1 file changed, 39 insertions(+), 40 deletions(-)
drivers/staging/sm750fb/ddk750_mode.c +39 -40
@@ -28,9 +28,9 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,poke32 (CRT_AUTO_CENTERING_TL ,0 );poke32 (CRT_AUTO_CENTERING_BR , - (((y -1 ) <<CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT ) & -CRT_AUTO_CENTERING_BR_BOTTOM_MASK ) | - ((x -1 ) &CRT_AUTO_CENTERING_BR_RIGHT_MASK )); + (((y -1 ) <<CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT ) & +CRT_AUTO_CENTERING_BR_BOTTOM_MASK ) | + ((x -1 ) &CRT_AUTO_CENTERING_BR_RIGHT_MASK ));/* * Assume common fields in dispControl have been properly set before
@@ -72,8 +72,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam, }/* only timing related registers will be programed */ -static int programModeRegisters (mode_parameter_t *pModeParam, -struct pll_value *pll) +static int programModeRegisters (mode_parameter_t *pModeParam,struct pll_value *pll) {int ret =0 ;int cnt =0 ;
@@ -83,32 +82,32 @@ static int programModeRegisters(mode_parameter_t *pModeParam,/* programe secondary pixel clock */ poke32 (CRT_PLL_CTRL ,sm750_format_pll_reg (pll));poke32 (CRT_HORIZONTAL_TOTAL , - (((pModeParam->horizontal_total -1 ) << -CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT ) & -CRT_HORIZONTAL_TOTAL_TOTAL_MASK ) | - ((pModeParam->horizontal_display_end -1 ) & -CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK )); + (((pModeParam->horizontal_total -1 ) << +CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT ) & +CRT_HORIZONTAL_TOTAL_TOTAL_MASK ) | + ((pModeParam->horizontal_display_end -1 ) & +CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK ));poke32 (CRT_HORIZONTAL_SYNC , - ((pModeParam->horizontal_sync_width << -CRT_HORIZONTAL_SYNC_WIDTH_SHIFT ) & -CRT_HORIZONTAL_SYNC_WIDTH_MASK ) | - ((pModeParam->horizontal_sync_start -1 ) & -CRT_HORIZONTAL_SYNC_START_MASK )); + ((pModeParam->horizontal_sync_width << +CRT_HORIZONTAL_SYNC_WIDTH_SHIFT ) & +CRT_HORIZONTAL_SYNC_WIDTH_MASK ) | + ((pModeParam->horizontal_sync_start -1 ) & +CRT_HORIZONTAL_SYNC_START_MASK ));poke32 (CRT_VERTICAL_TOTAL , - (((pModeParam->vertical_total -1 ) << -CRT_VERTICAL_TOTAL_TOTAL_SHIFT ) & -CRT_VERTICAL_TOTAL_TOTAL_MASK ) | - ((pModeParam->vertical_display_end -1 ) & -CRT_VERTICAL_TOTAL_DISPLAY_END_MASK )); + (((pModeParam->vertical_total -1 ) << +CRT_VERTICAL_TOTAL_TOTAL_SHIFT ) & +CRT_VERTICAL_TOTAL_TOTAL_MASK ) | + ((pModeParam->vertical_display_end -1 ) & +CRT_VERTICAL_TOTAL_DISPLAY_END_MASK ));poke32 (CRT_VERTICAL_SYNC , - ((pModeParam->vertical_sync_height << -CRT_VERTICAL_SYNC_HEIGHT_SHIFT ) & -CRT_VERTICAL_SYNC_HEIGHT_MASK ) | - ((pModeParam->vertical_sync_start -1 ) & -CRT_VERTICAL_SYNC_START_MASK )); + ((pModeParam->vertical_sync_height << +CRT_VERTICAL_SYNC_HEIGHT_SHIFT ) & +CRT_VERTICAL_SYNC_HEIGHT_MASK ) | + ((pModeParam->vertical_sync_start -1 ) & +CRT_VERTICAL_SYNC_START_MASK )); tmp =DISPLAY_CTRL_TIMING |DISPLAY_CTRL_PLANE ;if (pModeParam->vertical_sync_polarity)
@@ -140,25 +139,25 @@ static int programModeRegisters(mode_parameter_t *pModeParam,poke32 (PANEL_HORIZONTAL_TOTAL , reg);poke32 (PANEL_HORIZONTAL_SYNC , - ((pModeParam->horizontal_sync_width << -PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT ) & -PANEL_HORIZONTAL_SYNC_WIDTH_MASK ) | - ((pModeParam->horizontal_sync_start -1 ) & -PANEL_HORIZONTAL_SYNC_START_MASK )); + ((pModeParam->horizontal_sync_width << +PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT ) & +PANEL_HORIZONTAL_SYNC_WIDTH_MASK ) | + ((pModeParam->horizontal_sync_start -1 ) & +PANEL_HORIZONTAL_SYNC_START_MASK ));poke32 (PANEL_VERTICAL_TOTAL , - (((pModeParam->vertical_total -1 ) << -PANEL_VERTICAL_TOTAL_TOTAL_SHIFT ) & -PANEL_VERTICAL_TOTAL_TOTAL_MASK ) | - ((pModeParam->vertical_display_end -1 ) & -PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK )); + (((pModeParam->vertical_total -1 ) << +PANEL_VERTICAL_TOTAL_TOTAL_SHIFT ) & +PANEL_VERTICAL_TOTAL_TOTAL_MASK ) | + ((pModeParam->vertical_display_end -1 ) & +PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK ));poke32 (PANEL_VERTICAL_SYNC , - ((pModeParam->vertical_sync_height << -PANEL_VERTICAL_SYNC_HEIGHT_SHIFT ) & -PANEL_VERTICAL_SYNC_HEIGHT_MASK ) | - ((pModeParam->vertical_sync_start -1 ) & -PANEL_VERTICAL_SYNC_START_MASK )); + ((pModeParam->vertical_sync_height << +PANEL_VERTICAL_SYNC_HEIGHT_SHIFT ) & +PANEL_VERTICAL_SYNC_HEIGHT_MASK ) | + ((pModeParam->vertical_sync_start -1 ) & +PANEL_VERTICAL_SYNC_START_MASK )); tmp =DISPLAY_CTRL_TIMING |DISPLAY_CTRL_PLANE ;if (pModeParam->vertical_sync_polarity)
Signature · 1 line
2.11.0
Re: [Outreachy kernel] [PATCH v3 3/4] staging: sm750fb: Alignment should match open parenthesis
Quoted 1 line · Arushi Singhal
Fix checkpatch issues: "CHECK: Alignment should match open parenthesis".
I thought you were going to take another approach to improve this code?
julia
Quoted 137 lines
Signed-off-by Arushi Singhal <[email protected]>--- drivers/staging/sm750fb/ddk750_mode.c | 79 +++++++++++++++++------------------ 1 file changed, 39 insertions(+), 40 deletions(-)drivers/staging/sm750fb/ddk750_mode.c +39
-41@@ -28,9 +28,9 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,poke32 (CRT_AUTO_CENTERING_TL ,0 );poke32 (CRT_AUTO_CENTERING_BR , - (((y -1 ) <<CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT ) & -CRT_AUTO_CENTERING_BR_BOTTOM_MASK ) | - ((x -1 ) &CRT_AUTO_CENTERING_BR_RIGHT_MASK )); + (((y -1 ) <<CRT_AUTO_CENTERING_BR_BOTTOM_SHIFT ) & +CRT_AUTO_CENTERING_BR_BOTTOM_MASK ) | + ((x -1 ) &CRT_AUTO_CENTERING_BR_RIGHT_MASK ));/* * Assume common fields in dispControl have been properly set before @@ -72,8 +72,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam, }/* only timing related registers will be programed */ -static int programModeRegisters (mode_parameter_t *pModeParam, -struct pll_value *pll) +static int programModeRegisters (mode_parameter_t *pModeParam,struct pll_value *pll) {int ret =0 ;int cnt =0 ;@@ -83,32 +82,32 @@ static int programModeRegisters(mode_parameter_t *pModeParam,/* programe secondary pixel clock */ poke32 (CRT_PLL_CTRL ,sm750_format_pll_reg (pll));poke32 (CRT_HORIZONTAL_TOTAL , - (((pModeParam->horizontal_total -1 ) << -CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT ) & -CRT_HORIZONTAL_TOTAL_TOTAL_MASK ) | - ((pModeParam->horizontal_display_end -1 ) & -CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK )); + (((pModeParam->horizontal_total -1 ) << +CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT ) & +CRT_HORIZONTAL_TOTAL_TOTAL_MASK ) | + ((pModeParam->horizontal_display_end -1 ) & +CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK ));poke32 (CRT_HORIZONTAL_SYNC , - ((pModeParam->horizontal_sync_width << -CRT_HORIZONTAL_SYNC_WIDTH_SHIFT ) & -CRT_HORIZONTAL_SYNC_WIDTH_MASK ) | - ((pModeParam->horizontal_sync_start -1 ) & -CRT_HORIZONTAL_SYNC_START_MASK )); + ((pModeParam->horizontal_sync_width << +CRT_HORIZONTAL_SYNC_WIDTH_SHIFT ) & +CRT_HORIZONTAL_SYNC_WIDTH_MASK ) | + ((pModeParam->horizontal_sync_start -1 ) & +CRT_HORIZONTAL_SYNC_START_MASK ));poke32 (CRT_VERTICAL_TOTAL , - (((pModeParam->vertical_total -1 ) << -CRT_VERTICAL_TOTAL_TOTAL_SHIFT ) & -CRT_VERTICAL_TOTAL_TOTAL_MASK ) | - ((pModeParam->vertical_display_end -1 ) & -CRT_VERTICAL_TOTAL_DISPLAY_END_MASK )); + (((pModeParam->vertical_total -1 ) << +CRT_VERTICAL_TOTAL_TOTAL_SHIFT ) & +CRT_VERTICAL_TOTAL_TOTAL_MASK ) | + ((pModeParam->vertical_display_end -1 ) & +CRT_VERTICAL_TOTAL_DISPLAY_END_MASK ));poke32 (CRT_VERTICAL_SYNC , - ((pModeParam->vertical_sync_height << -CRT_VERTICAL_SYNC_HEIGHT_SHIFT ) & -CRT_VERTICAL_SYNC_HEIGHT_MASK ) | - ((pModeParam->vertical_sync_start -1 ) & -CRT_VERTICAL_SYNC_START_MASK )); + ((pModeParam->vertical_sync_height << +CRT_VERTICAL_SYNC_HEIGHT_SHIFT ) & +CRT_VERTICAL_SYNC_HEIGHT_MASK ) | + ((pModeParam->vertical_sync_start -1 ) & +CRT_VERTICAL_SYNC_START_MASK )); tmp =DISPLAY_CTRL_TIMING |DISPLAY_CTRL_PLANE ;if (pModeParam->vertical_sync_polarity)@@ -140,25 +139,25 @@ static int programModeRegisters(mode_parameter_t *pModeParam,poke32 (PANEL_HORIZONTAL_TOTAL , reg);poke32 (PANEL_HORIZONTAL_SYNC , - ((pModeParam->horizontal_sync_width << -PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT ) & -PANEL_HORIZONTAL_SYNC_WIDTH_MASK ) | - ((pModeParam->horizontal_sync_start -1 ) & -PANEL_HORIZONTAL_SYNC_START_MASK )); + ((pModeParam->horizontal_sync_width << +PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT ) & +PANEL_HORIZONTAL_SYNC_WIDTH_MASK ) | + ((pModeParam->horizontal_sync_start -1 ) & +PANEL_HORIZONTAL_SYNC_START_MASK ));poke32 (PANEL_VERTICAL_TOTAL , - (((pModeParam->vertical_total -1 ) << -PANEL_VERTICAL_TOTAL_TOTAL_SHIFT ) & -PANEL_VERTICAL_TOTAL_TOTAL_MASK ) | - ((pModeParam->vertical_display_end -1 ) & -PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK )); + (((pModeParam->vertical_total -1 ) << +PANEL_VERTICAL_TOTAL_TOTAL_SHIFT ) & +PANEL_VERTICAL_TOTAL_TOTAL_MASK ) | + ((pModeParam->vertical_display_end -1 ) & +PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK ));poke32 (PANEL_VERTICAL_SYNC , - ((pModeParam->vertical_sync_height << -PANEL_VERTICAL_SYNC_HEIGHT_SHIFT ) & -PANEL_VERTICAL_SYNC_HEIGHT_MASK ) | - ((pModeParam->vertical_sync_start -1 ) & -PANEL_VERTICAL_SYNC_START_MASK )); + ((pModeParam->vertical_sync_height << +PANEL_VERTICAL_SYNC_HEIGHT_SHIFT ) & +PANEL_VERTICAL_SYNC_HEIGHT_MASK ) | + ((pModeParam->vertical_sync_start -1 ) & +PANEL_VERTICAL_SYNC_START_MASK )); tmp =DISPLAY_CTRL_TIMING |DISPLAY_CTRL_PLANE ;if (pModeParam->vertical_sync_polarity) --2.11.0
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170313204853.24675-4-arushisinghal19971997%40gmail.com.
For more options, visit https://groups.google.com/d/optout.
PATCH v3 4/4 staging: sm750fb: Remove typedefs
In reply to Arushi SinghalThis patch removes typedefs from structures and renames them as per kernel coding standards.
--- drivers/staging/sm750fb/ddk750_mode.c | 6 +++--- drivers/staging/sm750fb/ddk750_mode.h | 20 +++++++++----------- drivers/staging/sm750fb/sm750_hw.c | 2 +- 3 files changed, 13 insertions(+), 15 deletions(-)
drivers/staging/sm750fb/ddk750_mode.c +3 -3
@@ -12,7 +12,7 @@* HW only supports 7 predefined pixel clocks, and clock select is * in bit 29:27 of Display Control register. */ -static unsigned long displayControlAdjust_SM750LE (mode_parameter_t *pModeParam,unsigned long dispControl) +static unsigned long displayControlAdjust_SM750LE (struct _mode_parameter_t *pModeParam,unsigned long dispControl) {unsigned long x, y;
@@ -72,7 +72,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam, }/* only timing related registers will be programed */ -static int programModeRegisters (mode_parameter_t *pModeParam,struct pll_value *pll) +static int programModeRegisters (struct _mode_parameter_t *pModeParam,struct pll_value *pll) {int ret =0 ;int cnt =0 ;
@@ -198,7 +198,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *return ret; } -int ddk750_setModeTiming (mode_parameter_t *parm,clock_type_t clock) +int ddk750_setModeTiming (struct _mode_parameter_t *parm,clock_type_t clock) {struct pll_value pll;unsigned int uiActualPixelClk;
drivers/staging/sm750fb/ddk750_mode.h +9 -11
@@ -3,37 +3,35 @@#include "ddk750_chip.h" -typedef enum _spolarity_t { +enum _spolarity_t {POS =0 ,/* positive */ NEG ,/* negative */ -} -spolarity_t ; +}; -typedef struct _mode_parameter_t { +struct _mode_parameter_t {/* Horizontal timing. */ unsigned long horizontal_total;unsigned long horizontal_display_end;unsigned long horizontal_sync_start;unsigned long horizontal_sync_width; -spolarity_t horizontal_sync_polarity; +enum _spolarity_t horizontal_sync_polarity;/* Vertical timing. */ unsigned long vertical_total;unsigned long vertical_display_end;unsigned long vertical_sync_start;unsigned long vertical_sync_height; -spolarity_t vertical_sync_polarity; +enum _spolarity_t vertical_sync_polarity;/* Refresh timing. */ unsigned long pixel_clock;unsigned long horizontal_frequency; -unsigned long vertical_frequency; +enum _spolarity_t vertical_frequency;/* Clock Phase. This clock phase only applies to Panel. */ -spolarity_t clock_phase_polarity; -} -mode_parameter_t ; +enum _spolarity_t clock_phase_polarity; +}; -int ddk750_setModeTiming (mode_parameter_t *parm,clock_type_t clock); +int ddk750_setModeTiming (struct _mode_parameter_t *parm,clock_type_t clock);#endif
drivers/staging/sm750fb/sm750_hw.c +1 -1
@@ -252,7 +252,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc, {int ret, fmt;u32 reg; -mode_parameter_t modparm; +struct _mode_parameter_t modparm;clock_type_t clock;struct sm750_dev *sm750_dev;struct lynxfb_par *par;
Signature · 1 line
2.11.0
Re: [Outreachy kernel] [PATCH v3 4/4] staging: sm750fb: Remove typedefs
Quoted 2 lines · Arushi Singhal
This patch removes typedefs from structures and renames them as per kernel coding standards.
Greg requested that typedef removing patches adjust only one patch at a time.
The names of the types typically need to be adjusted as compared to what is in the typedef. In your cases, the type names begin with _ and end with _t. Beginning with _ means that something is sort of internal, rarely used etc. That made sense when there was a typedef, but since you are removing that, the _ at the front should go too. Likewise, _t is an extension that indicates a typedef, but you don't have that any more, so the _t should be dropped too.
Finally, the log message talks about structures, but the changes involve one structure and one enum. The log message should describe everything that has changed.
julia
Quoted 113 lines
Signed-off-by Arushi Singhal <[email protected]>--- drivers/staging/sm750fb/ddk750_mode.c | 6 +++--- drivers/staging/sm750fb/ddk750_mode.h | 20 +++++++++----------- drivers/staging/sm750fb/sm750_hw.c | 2 +- 3 files changed, 13 insertions(+), 15 deletions(-)drivers/staging/sm750fb/ddk750_mode.c +3
-3@@ -12,7 +12,7 @@* HW only supports 7 predefined pixel clocks, and clock select is * in bit 29:27 of Display Control register. */ -static unsigned long displayControlAdjust_SM750LE (mode_parameter_t *pModeParam,unsigned long dispControl) +static unsigned long displayControlAdjust_SM750LE (struct _mode_parameter_t *pModeParam,unsigned long dispControl) {unsigned long x, y;@@ -72,7 +72,7 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam, }/* only timing related registers will be programed */ -static int programModeRegisters (mode_parameter_t *pModeParam,struct pll_value *pll) +static int programModeRegisters (struct _mode_parameter_t *pModeParam,struct pll_value *pll) {int ret =0 ;int cnt =0 ;@@ -198,7 +198,7 @@ static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *return ret; } -int ddk750_setModeTiming (mode_parameter_t *parm,clock_type_t clock) +int ddk750_setModeTiming (struct _mode_parameter_t *parm,clock_type_t clock) {struct pll_value pll;unsigned int uiActualPixelClk;drivers/staging/sm750fb/ddk750_mode.h +9
-11@@ -3,37 +3,35 @@#include "ddk750_chip.h" -typedef enum _spolarity_t { +enum _spolarity_t {POS =0 ,/* positive */ NEG ,/* negative */ -} -spolarity_t ; +}; -typedef struct _mode_parameter_t { +struct _mode_parameter_t {/* Horizontal timing. */ unsigned long horizontal_total;unsigned long horizontal_display_end;unsigned long horizontal_sync_start;unsigned long horizontal_sync_width; -spolarity_t horizontal_sync_polarity; +enum _spolarity_t horizontal_sync_polarity;/* Vertical timing. */ unsigned long vertical_total;unsigned long vertical_display_end;unsigned long vertical_sync_start;unsigned long vertical_sync_height; -spolarity_t vertical_sync_polarity; +enum _spolarity_t vertical_sync_polarity;/* Refresh timing. */ unsigned long pixel_clock;unsigned long horizontal_frequency; -unsigned long vertical_frequency; +enum _spolarity_t vertical_frequency;/* Clock Phase. This clock phase only applies to Panel. */ -spolarity_t clock_phase_polarity; -} -mode_parameter_t ; +enum _spolarity_t clock_phase_polarity; +}; -int ddk750_setModeTiming (mode_parameter_t *parm,clock_type_t clock); +int ddk750_setModeTiming (struct _mode_parameter_t *parm,clock_type_t clock);#endif drivers/staging/sm750fb/sm750_hw.c +1
-2@@ -252,7 +252,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc, {int ret, fmt;u32 reg; -mode_parameter_t modparm; +struct _mode_parameter_t modparm;clock_type_t clock;struct sm750_dev *sm750_dev;struct lynxfb_par *par; --2.11.0
--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170313204853.24675-5-arushisinghal19971997%40gmail.com.
For more options, visit https://groups.google.com/d/optout.